The S-ROM cementless femoral stem: history and literature review

How to Manage Metallosis: A Retrospective Cohort Analysis after Revision Hip Surgery

BACKGROUND

Adverse local tissue reactions to metal debris are due to a metal-on-metal bearing complication caused by micromotions at modular interfaces that induce corrosion of the protective oxide layer. This process could lead to wear, fretting, and abrasion with the release of metal ions locally and systemically, which may cause adverse local reactions in nearby tissues. The aim of this study is to describe a series of patients with painful local adverse tissue reactions secondary to corrosion at the modular neck-body interface, to document the clinical presentation, diagnostic workup, and surgical findings of our research, and to search for a possible correlation between metallosis and infection.

METHODS

A retrospective study of patients with adverse local tissue reactions due to metal surface corrosion was performed. Blood samples were collected to identify erythrocyte sedimentation rate, C reactive protein, and procalcitonin, and a magnetic resonance imaging protocol was performed.

RESULTS

Serum cobalt and chromium levels of the 43 patients tested were significantly higher on average. However, both erythrocyte sedimentation rate and C-reactive protein were significantly elevated. Magnetic resonance imaging showed adverse reactions to metal debris with large soft tissue masses and surrounding tissue damage.

CONCLUSIONS

Corrosion in hip prosthesis can lead to the release of metal ions and debris locally and systemically, resulting in local soft tissue changes. A "tumor-like" debridement can reduce this complication.

The midcortical-line is more reliable than the T-line in predicting stem anteversion in patients with developmental hip dysplasia after total hip arthroplasty

Background

Precise preoperative planning improves postoperative outcomes in total hip arthroplasty (THA), especially in developmental dysplasia of the hip (DDH) cases. Previous studies used the T-line and midcortical-line as preoperative landmarks to predict postoperative stem anteversion (PSA). However, the most reliable landmark in predicting PSA in DDH patients remains unclear. To find the most reliable measurement to predict the PSA in DDH patients, this study compared the midcortical-line and T-line at different femoral neck levels.

Methods

Pre- and postoperative Computed Tomography (CT) scans of 28 hips in 21 DDH patients who received THA were obtained for three-dimensional femoral models. The preoperative CT scan was used to measure the anteversion of the midcortical-line on the axial cross-sectional plane images (AM-CT), the anteversion of the midcortical-line from 3D models (AM-3D), and the T-line from 3D models (AT-3D) at simulated osteotomy planes at 5 and 10 mm heights proximal to the base of the lesser trochanter. The correlation between the preoperative femoral anteversion (AM-CT, AM-3D, AT-3D) and the PSA was assessed to evaluate the prediction accuracy.

Results

The correlations between the AM-CT and the PSA were 0.86 (mean difference (MD) = 1.9°) and 0.92 (MD = −3.0°) at 5 and 10 mm heights, respectively. The correlation between the AM-3D and the PSA were 0.71 (MD = −11.6°) and 0.61 (MD = −12.9°) at 5 and 10 mm heights. The AT-3D was significantly greater (MD = 15.4°) than the PSA (p-value <0.01) at 5 mm cutting height, and the correlation between the AT-3D and the PSA was 0.57 (MD = 7.8°) at 10 mm cutting height.

Conclusions

The AM-CT at the 10 mm height had the strongest correlation with the PSA and was more reliable in predicting the PSA when compared with the AM-3D and the AT-3D in DDH patients.

Total Hip Arthroplasty after McMurray's Osteotomy - A Case Report and Review of Literature

Introduction:

Total hip arthroplasty after McMurray’s osteotomy increases the operative difficulties and decreases the chances of better outcome. With the advent of modular femoral stems, minute changes can be done to individual joints, which allow intraoperative flexibility and better post-operative outcome. Thus, it should be considered as an option for complicated cases.

Case Report:

We report a case of a 35-year-old female with chief complain of pain in the left hip while walking for the past 2 years. The patient also had difficulty in squatting and sitting cross legged. History of fracture in the left hip at 4 years of age for which McMurray’s osteotomy was done. The patient was operated with total hip arthroplasty using modular Sivash range of motion (S-ROM) stem.

Conclusion:

Modular S-ROM total hip arthroplasty is a good option for treatment in cases with previous osteotomy in femur.

Modular prosthesis fracture in a patient with developmental dysplasia of the hip: a case report and literature review

BACKGROUND

Modular prosthesis fracture, especially distal femoral fracture, is a rare complication of total hip arthroplasty (THA). However, it is catastrophic, and may have a serious impact on the patients. A distal femoral prosthesis fracture in a patient with developmental dysplasia of the hip (DDH) with nonunion at the subtrochanteric osteotomy site has not yet been reported in any literature. This report presents the first such case, with a purpose of analyzing the causes of modular prosthesis fractures and nonunion of the osteotomy area, so as to provide orthopedic surgeons with experience and lessons.

CASE PRESENTATION

We report the case of a 52-year-old woman with the distal femoral prosthesis fracture after THA and subtrochanteric osteotomy for Crowe type IV DDH. The patient had severe pain in the left thigh and her activities were limited. Plain radiographs revealed fracture of the left distal femoral prosthesis and nonunion in the subtrochanteric osteotomy region of the left femur. After a revision of the THA, the patient's symptoms were resolved.

CONCLUSIONS

A prosthesis fracture combined with nonunion at the subtrochanteric osteotomy site is a rare complication. Modular THA combined with a subtrochanteric osteotomy in the treatment of Crowe type IV DDH should reduce the damage to blood supply and avoid further nonunion of the osteotomy area, which may otherwise lead to modular prosthesis fractures. A detailed preoperative plan and suitable rehabilitation program may help minimize the occurrence of subtrochanteric osteotomy nonunion and reduce complications, including femoral prosthesis fractures, in patients with DDH.

Mid- to Long-Term Outcomes of Cementless Modular, Fluted, Tapered Stem for Massive Femoral Bone Loss in Revision Total Hip Arthroplasty

OBJECTIVE

To evaluate mid- to long-term results of revision total hip arthroplasty for massive femoral bone loss using a cementless modular, fluted, tapered stem.

METHODS

This is a retrospective study performed at a single hospital. During the period of January 2007 to January 2015, 33 patients (34 hips) underwent primary revision surgery with cementless modular, fluted, tapered stems due to femoral bone loss. Sixteen men and 17 women were included in the study, with an average age of 63.9 ± 11.7 years (range, 27 to 88 years). Operative data including operative duration, length of incision, drainage volume and duration, blood loss and transfusion, cases of bone graft and extended trochanteric osteotomy were recorded. Clinical evaluation was performed using Harris hip score (HHS), visual analogue scale (VAS), and patients' satisfaction. Radiographic data including femoral stem fixation, subsidence, integrin of allograft bone, and leg length discrepancy were assessed. Complications and survivorship were evaluated using Kaplan-Meier survival rate.

RESULTS

The mean follow-up was 9.1 ± 2.5 years (range, 5-13 years). The Harris hip score was 43.6 ± 11.5 preoperatively and maintained at 86.5 ± 6.6 at the time of latest follow-up (P < 0. 05). The X-ray showed bone ingrowth fixation in 30 hips (88%), fibrous stable fixation in three hips (9%), and instability in one hip (3%). The average stem subsidence was 3.9 ± 2.2 mm (range, 1 to 10 mm). The mean difference in leg length in our study was 3.3 ± 2.7 mm (range, 0 to 10 mm), and the leg length discrepancy in 28 (82%) patients was within 5 mm. No case of junction fracture was observed. Seven (21%) intraoperative fractures occurred in our study. Three (9%) cases with infection were observed after revision. Six (18%) patients had lower limb vein thrombosis. The survivorship of prostheses with re-revision for any reason was 95% (95% CI, 12.0 to 13.0) at the 10-year follow-up. Three (9%) re-revisions were needed, including one for aseptic loosening, one for dislocation, and one for infection.

CONCLUSION

The mid- to long-term results of revision total hip arthroplasty with the cementless modular, fluted, tapered stems are encouraging for massive femoral bone loss.

Modular Stems: Advantages and Current Role in Primary Total Hip Arthroplasty

Using modular femoral stems in total hip arthroplasty enables surgeons to make fine adjustments to individual joints and offers intraoperative flexibility. The concept of modularity has been developed in numerous shapes, resulting in a vast range of options. Among them, the greatest achievement has been made for prostheses with modular proximal sleeves. The use of these implants has resulted in excellent mid- to long-term results in a number of cases. Although the use of tapered stems with a broaching technique is gaining popularity in straightforward primary surgeries, modular femoral implants are still associated with a number of potential challenges (e.g., developmental dysplasia of the hip, infection sequelae, and skeletal dysplasia). Based on published results, it is advisable to consider it as an option for complicated cases where the proximal femur is severely deformed.

Fracture of a spline of the femoral stem in an ingrown modular hip implant

INTRODUCTION

Physiologic strain patterns of the femur are altered by the bending stiffness of the implant as well as the loading pattern of the implant itself. The Savish Range of Motion (S-ROM) femoral stem has been designed with flutes (to decrease distal material) and with a coronal slot (to decrease stiffness).

MATERIALS

The purpose of this case report is to briefly discuss design characteristics of femoral stems and their relationship to thigh pain as well as to describe the only report in the literature of a fracture of the anterior spline of a S-ROM prosthesis at the coronal slot.

RESULTS

The femoral stem fractured at the coronal slot due to multiple bending moments in a small diameter stem.

CONCLUSIONS

The proximal metaphyseal sleeve remains well fixed and the patient is functioning well without pain nearly a year after the identification of the fracture on routine follow-up.

NUMERICAL AND STOCHASTIC ANALYSIS OF CORROSION IN MODULAR HIP IMPLANTS

The influence of localized corrosion on cementless titanium-alloy modular total hip arthroplasty was analyzed using numerical and stochastic modeling. Corrosion depth influences maximum stress significantly, thereby reducing the load carrying capacity. Numerical analysis revealed that the stress levels due to corrosion in the modular implants are influenced not only by the pit geometry, but also by the contact properties of the taper junctions. Subsequently, crevice corrosion was economically modeled with two parameters related to physical and chemical properties of the materials involved. The solution introduces a dimensionless number that determines whether anoxic conditions will be reached. The analysis confirms the power-law relationship for the exponent variation with the concentration gradient variation assumed by others. The results may be used in averting the progression to rapid corrosion growth through infusion of oxygen in the crevice at the appropriate time intervals. Stochastic modeling of crevice area and maximum depth shows a power-law increase in dispersion measures with exponent of 0.63–0.64 though the average increase follows a more modest exponent of 0.13–0.15. A holistic approach, and continuous research towards the development of robust corrosion models is warranted so as to predict and enhance the design life of otherwise successful modular arthroplasties. A better understanding of the phenomenon may help alleviate early and catastrophic fractures.

Total hip arthroplasty (S-ROM stem) and subtrochanteric osteotomy for Crowe type IV developmental dysplasia of the hip

BACKGROUND

Developmental dysplasia of the hip (DDH) in adults with severe pain and disability is best treated by total hip arthroplasty (THA). The purpose of this study was to retrospectively evaluate the outcomes of subtrochanteric shortening osteotomy combined with THA using S-ROM stem for those severe patients with a special focus on the effect of two shapes in the subtrochanteric osteotomy ends: Oblique and transverse.

MATERIALS AND METHODS

Twenty one cases with mean age of 43.6 years who met inclusion criteria and were operated between February 2007 and February 2012 were included in the study. Those cases had been divided into two groups (oblique vs. transverse) and all records between the two groups were analyzed.

RESULTS

The Harris hip score significantly improved from 30.6 (range 18-59) preoperatively to 91.2 (range 87-98) postoperatively by the latest followup. Complications including one deep venous thrombosis, one intraoperative fracture of femur and two dislocations occurred while they were addressed properly afterward. The oblique group showed significant advantages in operative time, union time and additional fixation in comparison with the transverse group.

CONCLUSIONS

In the primary THA for the treatment of irreducible DDH, subtrochanteric oblique osteotomy combined with the freely-rotatable S-ROM stem provided favorable short term outcomes by affording both morphological and functional advantages.

Failure of Emperion modular femoral stem with implant analysis

Modularity in total hip arthroplasty provides multiple benefits to the surgeon in restoring the appropriate alignment and position to a previously damaged hip joint. The vast majority of modern implants incorporate modularity into their design with some implants having multiple modular interfaces. There is the potential for failure at modular junctions because of fretting and crevice corrosion in combination with mechanical loading. This case report details the failure of an Emperion (Smith and Nephew, Memphis, TN) femoral stem in a 67-year-old male patient 6 years after total hip replacement. Analysis of the implant revealed mechanically assisted crevice corrosion that likely accelerated fatigue crack initiation in the hip stem. The benefits of modularity come with the potential drawback of a combination of fretting and crevice corrosion at the modular junction, which may accelerate fatigue, crack initiation and ultimately reduce the hip longevity.

Mid-term Results of Revision Total Hip Arthroplasty Using Modular Cementless Femoral Stems

Purpose

The purpose of this study was to evaluate the clinical and radiological results of revision total hip arthroplasty using modular distal fixation stems for proximal femoral deficiency.

Materials and Methods

Forty-five patients (47 hips) were analyzed more than 24 months after revision total hip arthroplasty that used modular distal fixation stems and was performed between 2006 and 2012. There were proximal femoral defects in all cases. Preoperative femoral defect classification revealed Paprosky type II in 31 cases, type IIIA in 7, and type IIIB in 9. The mean duration of follow-up was 53.4 (25-100) months. We evaluated the Harris hip score (HHS), walking ability according to Koval as clinical parameters, stem stability, and stem position change as radiographic parameters. Kaplan-Meier survival analysis was performed.

Results

The average HHS improved form 39.5 points to 91.3 points and walking ability also improved in most cases; all patients had stable fixation of the femoral stem. Postoperative complications included 5 cases of infection and 2 cases of dislocation. The survival rate with the end point of re-revision surgery due to infection or dislocation was 86% after 8-year follow-up.

Conclusion

Cementless revision total hip arthroplasty using modular femoral stems is useful because the stems can be stably fixed on the diaphyseal portion of the femur, which has relatively good bone quality at mid-term follow-up.

Modular hip implant fracture at the stem-sleeve interface

The use of modular implants in femoral stem design has grown increasingly popular over the last decade because of the theoretical advantage of more flexibility and optimization of femoral anteversion, limb length, and femoral component offset. With the benefit of increased surgical flexibility, however, modularity also carries the theoretical risks of fretting at the modular surfaces, sequelae of wear debris, and possible failure and fracture of the stem at the modular junction. Indeed, there have been an increasing number of reports of modular implants failing due to fracture at modular junctions. The S-ROM prosthesis (DePuy Orthopaedics, Inc, Warsaw, Indiana), however, has a stellar clinical record and has been used with good results in both primary and revision total hip arthroplasty. Only a single case of S-ROM failure at the stem-sleeve interface has been reported in the orthopedic literature. The aim of this case report was to present a succinct history of proximal modularity in total hip arthroplasty and to describe the only known case of this type of catastrophic failure in an S-ROM prosthesis with a metal-on-metal bearing. Despite a low level of serum metal ions on presentation, scanning electron microscopy showed findings consistent with corrosive processes and pseudotumor was seen at revision surgery.

Adverse clinical outcomes in a primary modular neck/stem system

We report our experience with 215 recalled neck modular stems due to corrosion. Among the 195 hips with 2 years follow-up, 56% had no clinical symptoms, 26% had groin pain (typical of corrosion), and 17% had other symptoms. Cobalt levels were comparable between asymptomatic (3.4 μg/L, range 0.7-7.3 μg/L) and symptomatic patients (4.0 μg/L range 0-13.2 μg/L). Abnormal imaging findings were seen in 46% of symptomatic and 11% of asymptomatic hips (P=0.001). Twenty-six hips (13%) have either undergone revision surgery or have been scheduled. Evidence of corrosion was seen at revision surgery in all patients. Despite modest elevations in serum cobalt levels, abnormal imaging studies were seen in 36%, clinical symptoms were seen in 44%, and revision for corrosion was undertaken or scheduled in 13% of the hips.

Failure of a modular hip implant at the stem-sleeve interface

In the current era of total hip arthroplasty (THA), orthopedic surgeons have several fixation options at their disposal. The modern monoblock prosthesis, introduced by Dr. Sir John Charnley, has seen many modifications since its inception in the 1970s and continues to be the most commonly used prosthesis style for primary and revision THA. Proximal modular sleeve technology was introduced in 1967 by Konstantin Sivash, modifying his original 1956 Sivash Stem design. The design is now known as the S-ROM, and although design modifications continue to date, the fundamental structure of the S-ROM remains essentially unchanged. Several other proximal modular prostheses are now currently available for use in THA. Although this similarity in design enables considerable surgical flexibility, it also links their potential for catastrophic failure. This aim of this article was to present a brief history of proximal modularity in THA and to add to the small body of literature regarding catastrophic failure in modular hip implants, including its proposed etiologies including micromotion, fretting and corrosion.

Femoral stem fracture and in vivo corrosion of retrieved modular femoral hips

A series of 78 retrieved modular hip devices were assessed for fretting and corrosion. Damage was common at both the head-neck junction (54% showing corrosion; 88% showing fretting) and at the stem-sleeve junction (88% corrosion; 65% fretting). Corrosion correlated to in vivo duration, patient activity, and metal (vs ceramic) femoral heads but did not correlate to head carbon content. Femoral stem fatigue fracture was observed in seven retrievals; all had severe corrosion, were under increased stress, and were in vivo longer than the non-fractured cohort. This study emphasizes the potential for stem fracture when small diameter femoral stems with large offsets are used in heavy and active patients. Designs which reduce fretting and corrosion in modular implants is warranted as patients demand longer lasting implants.

Total hip arthroplasty using S-ROM prosthesis for dysplastic hip

PURPOSE

The purpose of this study was to evaluate the clinical and radiological results of total hip arthroplasty using a proximal modular femoral stem in patients who had secondary coxarthrosis associated with a dysplastic hip.

MATERIALS AND METHODS

Forty-two patients (45 hips) with secondary coxarthrosis were evaluated after undergoing primary total hip arthroplasty using an S-ROM proximal modular femoral stem. The average follow-up was 80 months (range: 60 to 96 months). Clinical and radiological assessments were performed based on the Harris hip score and the radiological changes around the prosthesis.

RESULTS

The average Harris hip score improved from 52.2 points to 88.5 points. All femoral stems showed stable fixation; there were 37 cases by bony ingrowth and 8 cases by stable fibrous ingrowth. Neither osteolysis nor progressive radiolucent lines around the femoral stem were found at the last follow-up. Forty-one hips (91.9%) revealed excellent or good clinical results at the most recent follow-up.

CONCLUSION

For advanced secondary coxarthrosis, total hip arthroplasty with the use of the proximal modular femoral stem yielded good mid-term results with respect to the clinical and radiological criteria.

Periprosthetic stress fractures at the sleeve/stem junction of the Sivash-Range of Motion modular femoral stem

We report on 13 cases of periprosthetic stress fracture at the sleeve/stem junction using the Sivash-Range of Motion femoral prosthesis. Radioisotope bone scans confirmed the incidence of fracture, and review of the lateral radiographs revealed anteromedial notching of the distal sleeve on the metaphyseal throat of the femur. Treatment in all cases was expectant with full resolution of symptoms. However, there were 3 cases of recurrence, 1 of which needed revision to a more distally loading stem. This is a rare complication when using this prosthesis, but we recommend a slight alteration of the entry point for the femoral reamer when using this stem and advise nonsurgical management if it occurs, as the natural history is for the condition to settle.

Modular femoral sleeve and stem implant provides long-term total hip survivorship

BACKGROUND

A femoral implant with a modular sleeve and stem has been designed to allow independent and complete metaphyseal-diaphyseal fit and fill as well as independent rotation to accommodate anteversion at the time of THA.

QUESTIONS/PURPOSES

In a prospective study we asked whether such a modular femoral sleeve and stem implant used during THA could provide (1) high long-term survivorship; (2) radiographically stable implants without radiolucencies, stress shielding, or osteolysis; and (3) high clinical scores in patients 15 to 20 years after a primary THA.

PATIENTS AND METHODS

We prospectively evaluated 31 hips that underwent a primary THA using a modular femoral component for clinical outcome (Harris hip score) and radiographic outcome (implant stability, femoral loosening, osteolysis and stress shielding) at a minimum followup of 15 years (mean, 17 years; range, 15-20.2 years).

RESULTS

There were no femoral revisions for aseptic loosening; all hips had radiographic evidence of bone ingrowth. Two well-ingrown components were revised for late hematogenous infection. Some degree of proximal femoral disuse atrophy from stress shielding occurred in 23 hips (74%) but was nonprogressive and did not result in any failures or complications. Femoral osteolysis occurred in 18 hips (58%), but we cannot definitively determine whether or not the modular junction contributed to this.

CONCLUSIONS

These data suggest this modular femoral stem can provide long-term survivorship with no cases of aseptic loosening at 15 to 20 years after primary THA. However, it may be prudent when using this femoral stem to consider an articulation with an alternative bearing or, if the modularity is not needed to address femoral anteversion and metaphyseal-diaphyseal mismatch, to consider a nonmodular femoral stem.

LEVEL OF EVIDENCE

Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Hip resurfacing for the treatment of developmental dysplasia of the hip

Total hip arthroplasty (THA) with ceramic-on-ceramic bearings and an uncemented design is considered an effective treatment of developmental dysplasia of the hip, especially for young, active patients. The new generation of hip resurfacing with large femoral heads offers more stability, better range of motion (ROM), and more bone preservation than conventional THA. Twenty-one consecutive patients (26 hips) with osteoarthritis secondary to developmental dysplasia of the hip underwent metal-on-metal hip resurfacing. Average patient age at the time of surgery was 46.5 years (range, 37-59 years). Six patients (28.6%) were men and 15 (71.4%) were women. During the same period, another 21 patients (26 hips) with developmental dysplasia of the hip secondary to osteoarthritis were treated with ceramic-on-ceramic THA. Average patient age at the time of surgery was 48.2 years (range, 38-64 years). At follow-up, no complications (eg, dislocation, infection, or symptomatic deep venous thrombosis) occurred in the 2 groups. No significant difference was noted in Harris Hip Score between the 2 groups, but the average ROM of the hip resurfacing group was significantly better than the THA group (P<.05). All patients reported significant pain relief on their operated hips, with the postoperative visual analog scale scores <2. No signs of early loosening were observed on radiographs. The short-term results of the metal-on-metal hip resurfacing have been encouraging in the treatment of developmental dysplasia of the hip, with better ROM recovery than conventional THA.