Evaluation of the mechanical properties and biocompatibility of gypsum-containing calcium silicate cements

Exploring a new Portland cement-free calcium silicate cement -Part 1: Synthesis of dicalcium and tricalcium silicate

Mineral trioxide aggregate cement is an excellent pulp-capping material; however, its base Portland cement contains highly toxic elements and is expensive. This study aimed to explore the possibility of using calcium silicate cement without Portland cement. Synthesis was attempted via firing using calcium silicate (CS), as the base material, and calcium oxide (CA). According to the chemical reaction, they were weighed and sintered in an electric furnace at a sintering temperature of 1,300ºC based on the results of thermogravimetric differential thermal analysis. The powder composition after firing was examined by X-ray diffraction analyses. Compressive tests were performed using a universal testing machine. The sintered powders were confirmed as dicalcium silicate (CS2) and tricalcium silicate (CS3); however, some peaks were detected and their compressive strengths were lower than that of CS. These results suggest that CS2 and CS3 were successfully synthesized from a mixture of CA and CS.

Influence of Phase Composition and Morphology on the Calcium Ion Release of Several Classical and Hybrid Endodontic Cements

The ability of the cement to release calcium ions, which participate in the remineralization of dentin by forming apatite which improves root canal sealing with time, is of particular importance. Five recently introduced calcium-silicate commercial dental cements were investigated with a view to the influence of the physicochemical characteristics on the possibility of releasing calcium ions in an aqueous medium. Two hybrid calcium-silicate cements in the form of a paste-like ready mix (BioCal® Cap and TheraCal LC) and three calcium-silicate cements consisting of two components-powder and liquid (Harvard MTA Universal, Rootdent, and BioFactor) were subjected to powder XRD, SEM, and EDS for detailed examination. The cements were immersed in water for 28 days and the phase composition and morphology of the cements before and after soaking were studied. The total calcium release for each cement was determined by ICP-OES. BioFactor and BioCal® Cap release the highest amount of calcium ions, while the lowest release is registered with Rootdent and TheraCal LC. The PDT treatment of BioFactor does not influence substantially the calcium release. The impact of the elemental and phase composition on the calcium release and calcium carbonate formation was discussed. A reciprocal relation between the aluminum content and the quantity of the released calcium has been found.

Effects of vehicles on the physical properties and biocompatibility of premixed calcium silicate cements

Premixed calcium silicate cements (pCSCs) contain vehicles which endow fluidity and viscosity to CSCs. This study aimed to investigate the effects of three vehicles, namely, polyethylene glycol (PEG), propylene glycol (PG), and dimethyl sulfoxide (DMSO), on the physicochemical properties and biocompatibility of pCSCs. The setting time, solubility, expansion rate, and mechanical strength of the pCSCs were evaluated, and the formation of calcium phosphate precipitates was assessed in phosphate-buffered saline (PBS). The effects of pCSC extracts on the osteogenic differentiation of mesenchymal stem cells (MSCs) were investigated. Finally, the tissue compatibility of pCSCs in rat femurs was observed. CSC containing PEG (CSC-PEG) exhibited higher solubility and setting time, and CSC-DMSO showed the highest expansion rate and mechanical strength. All pCSCs generated calcium phosphate precipitates. The extract of CSC-PG induced the highest expressions of osteogenic markers along with the greatest calcium deposites. When implanted in rat femurs, CSC-PEG was absorbed considerably, whereas CSC-PG remained relatively unaltered inside the femur.

Comparative Biocompatibility and Odonto-/Osteogenesis Effects of Hydraulic Calcium Silicate-Based Cements in Simulated Direct and Indirect Approaches for Regenerative Endodontic Treatments: A Systematic Review

BACKGROUND

Regenerative dentistry is the operation of restoring dental, oral and maxillofacial tissues. Currently, there are no guidelines for the ideal cement/material in regenerative endodontic treatments (RET). Hydraulic calcium silicate-based cements (hCSCs) are currently the material of choice for RET.

OBJECTIVES

This systematic review was conducted to gather all of the different direct and indirect approaches of using hCSCs in RET in vitro and in vivo, and to ascertain if there are any superiorities to indirect approaches.

METHODS AND MATERIALS

This systematic review was conducted according to the 2020 PRISMA guidelines. The study question according to the PICO format was as follows: Comparison of the biological behavior (O) of stem cells (P) exposed to hCSCs through direct and indirect methods (I) with untreated stem cells (C). An electronic search was executed in Scopus, Google Scholar, and PubMed.

RESULTS

A total of 78 studies were included. Studies were published between 2010 and 2022. Twenty-eight commercially available and eighteen modified hCSCs were used. Seven exposure methods (four direct and three indirect contacts) were assessed. ProRoot MTA and Biodentine were the most used hCSCs and had the most desirable results. hCSCs were either freshly mixed or set before application. Most studies allowed hCSCs to set in incubation for 24 h before application, which resulted in the most desirable biological outcomes. Freshly mixed hCSCs had the worst outcomes. Indirect methods had significantly better viability/proliferation and odonto-/osteogenesis outcomes.

CONCLUSION

Biodentine and ProRoot MTA used in indirect exposure methods result in desirable biological outcomes.