Comparison of alkaline phosphatase activity of MC3T3-E1 cells cultured on different Ti surfaces: modified sandblasted with large grit and acid-etched (MSLA), laser-treated, and laser and acid-treated Ti surfaces

Aqueous extract of Rehmanniae Radix Praeparata improves bone health in ovariectomized rats by modulating the miR-29a-3p/NFIA/Wnt signaling pathway axis

ETHNOPHARMACOLOGICAL RELEVANCE

Rehmanniae Radix Praeparata (RRP), a widely used traditional Chinese medicine and a processed form of Rehmannia glutinosa, is primarily utilized to supplement kidney function and promote bone health. Clinical evidence suggests that RRP exhibits significant efficacy in the treatment of osteoporosis (OP). However, the precise mechanisms underlying its therapeutic effects remain incompletely understood.

AIM OF THE STUDY

OP is a systemic skeletal disorder characterized by reduced bone density and quality, leading to an increased risk of fractures. The aim of this study is to evaluate the effectiveness and underlying mechanisms of RRP in treating OP.

MATERIALS AND METHODS

Ovariectomized (OVX) rats were administered RRP aqueous extract via gavage for three months. After the treatment period, femoral microstructure and osteogenic protein levels were assessed to evaluate the efficacy of RRP. Serum exosomes (Exos) derived from different groups of rats were isolated and characterized. The levels of miR-29a-3p in serum-derived Exos and femoral tissue were quantified. Subsequently, Exos were co-cultured with rat bone marrow mesenchymal stem cells (rBMSCs) to investigate their role in promoting osteogenic differentiation and explore the molecular mechanisms underlying this process, particularly through the miR-29a-3p/NFIA/Wnt signaling pathway axis.

RESULTS

OVX rats exhibited significant bone microdamage. In contrast, the RRP-treated OVX rats showed marked improvements in femoral bone microstructure and increased osteogenic protein expression. MiR-29a-3p levels were elevated in serum-derived Exos from the RRP-treated rats. Furthermore, rBMSCs treated with these Exos displayed an increase in miR-29a-3p expression. Further investigations revealed that miR-29a-3p promoted osteogenesis by inhibiting NFIA expression in both bone tissue and rBMSCs. Overexpression of NFIA reversed the osteogenic effects of miR-29a-3p, confirming NFIA as its direct target and suggesting that miR-29a-3p enhances osteogenesis by inhibiting NFIA. Additionally, NFIA was found to promote the transcription of SFRP1, an inhibitor of the Wnt signaling pathway. Our findings suggest that the RRP aqueous extract increases miR-29a-3p levels in serum Exos, which in turn inhibits NFIA and activates the Wnt signaling pathway, thereby promoting osteogenesis.

CONCLUSION

These findings suggest that the RRP aqueous extract improves bone health and mitigates bone microstructural damage caused by OP through the regulation of the miR-29a-3p/NFIA/Wnt signaling pathway axis.

Fabrication of a micro/nanocomposite structure on the surface of high oxygen concentration titanium to promote bone formation

This study investigated the properties of the micro/nano composite structure on the surface of high oxygen concentration titanium (HOC-Ti) after anodic oxidation modification (HOC-NT) and evaluated its biocompatibility as a dental implant material in vitro and in vivo. HOC-Ti was produced by titanium powders and rutile powders using the powder metallurgy method. Its surface was modified by anodic oxidation. After detecting the electrochemical characteristics, the surface properties of HOC-NT were investigated. MC3T3 and MLO-Y4 cells were employed to evaluate the biocompatibility of HOC-NT and cocultured to study the effects of the changes in osteocytes induced by HOC-NT on osteoblasts. While, its possible mechanism was investigated. In addition, osseointegration around the HOC-NT implant was investigated through in vivo experiments. The results showed that a unique micronano composite structure on the HOC-Ti surface with excellent hydrophilicity and suitable surface roughness was created after anodic oxidation promoted by its electrochemical characteristics. The YAP protein may play an important role in regulating bone remodeling by β-catenin and Rankl/OPG Signaling Pathways. An in vivo study also revealed an accelerated formation rate of new bone and more stable osseointegration around the HOC-NT implant. In view of all experimental results, it could be concluded that the unique morphology of HOC-NT has enhanced physicochemical and biological properties. The promotion of bone formation around implants indicated the feasibility of HOC-NT for applications in oral implants.

The dose-dependent impact of γ-radiation reinforced with backscatter from titanium on primary human osteoblasts

In head and neck cancer patients receiving dental implants prior to radiotherapy, backscatter from titanium increases the radiation dose close to the surface, and may affect the osseointegration. The dose-dependent effects of ionizing radiation on human osteoblasts (hOBs) were investigated. The hOBs were seeded on machined titanium, moderately rough fluoride-modified titanium, and tissue culture polystyrene, and cultured in growth- or osteoblastic differentiation medium (DM). The hOBs were exposed to ionizing γ-irradiation in single doses of 2, 6 or 10 Gy. Twenty-one days post-irradiation, cell nuclei and collagen production were quantified. Cytotoxicity and indicators of differentiation were measured and compared to unirradiated controls. Radiation with backscatter from titanium significantly reduced the number of hOBs but increased the alkaline phosphatase activity in both types of medium when adjusted to the relative cell number on day 21. Irradiated hOBs on the TiF-surface produced similar amounts of collagen as unirradiated controls when cultured in DM. The majority of osteogenic biomarkers significantly increased on day 21 when the hOBs had been exposed to 10 Gy, while the opposite or no effect was observed after lower doses. High doses reinforced with backscatter from titanium resulted in smaller but seemingly more differentiated subpopulations of osteoblasts.

Influence of Femtosecond Laser Modification on Biomechanical and Biofunctional Behavior of Porous Titanium Substrates

Bone resorption and inadequate osseointegration are considered the main problems of titanium implants. In this investigation, the texture and surface roughness of porous titanium samples obtained by the space holder technique were modified with a femtosecond Yb-doped fiber laser. Different percentages of porosity (30, 40, 50, and 60 vol.%) and particle range size (100–200 and 355–500 μm) were compared with fully-dense samples obtained by conventional powder metallurgy. After femtosecond laser treatment the formation of a rough surface with micro-columns and micro-holes occurred for all the studied substrates. The surface was covered by ripples over the micro-metric structures. This work evaluates both the influence of the macro-pores inherent to the spacer particles, as well as the micro-columns and the texture generated with the laser, on the wettability of the surface, the cell behavior (adhesion and proliferation of osteoblasts), micro-hardness (instrumented micro-indentation test, P–h curves) and scratch resistance. The titanium sample with 30 vol.% and a pore range size of 100–200 μm was the best candidate for the replacement of small damaged cortical bone tissues, based on its better biomechanical (stiffness and yield strength) and biofunctional balance (bone in-growth and in vitro osseointegration).

3D Bioprinted Scaffolds for Bone Tissue Engineering: State-Of-The-Art and Emerging Technologies

Treating large bone defects, known as critical-sized defects (CSDs), is challenging because they are not spontaneously healed by the patient’s body. Due to the limitations associated with conventional bone grafts, bone tissue engineering (BTE), based on three-dimensional (3D) bioprinted scaffolds, has emerged as a promising approach for bone reconstitution and treatment. Bioprinting technology allows for incorporation of living cells and/or growth factors into scaffolds aiming to mimic the structure and properties of the native bone. To date, a wide range of biomaterials (either natural or synthetic polymers), as well as various cells and growth factors, have been explored for use in scaffold bioprinting. However, a key challenge that remains is the fabrication of scaffolds that meet structure, mechanical, and osteoconductive requirements of native bone and support vascularization. In this review, we briefly present the latest developments and discoveries of CSD treatment by means of bioprinted scaffolds, with a focus on the biomaterials, cells, and growth factors for formulating bioinks and their bioprinting techniques. Promising state-of-the-art pathways or strategies recently developed for bioprinting bone scaffolds are highlighted, including the incorporation of bioactive ceramics to create composite scaffolds, the use of advanced bioprinting technologies (e.g., core/shell bioprinting) to form hybrid scaffolds or systems, as well as the rigorous design of scaffolds by taking into account of the influence of such parameters as scaffold pore geometry and porosity. We also review in-vitro assays and in-vivo models to track bone regeneration, followed by a discussion of current limitations associated with 3D bioprinting technologies for BTE. We conclude this review with emerging approaches in this field, including the development of gradient scaffolds, four-dimensional (4D) printing technology via smart materials, organoids, and cell aggregates/spheroids along with future avenues for related BTE.

Synergistic Effect of PVDF-Coated PCL-TCP Scaffolds and Pulsed Electromagnetic Field on Osteogenesis

Bone exhibits piezoelectric properties. Thus, electrical stimulations such as pulsed electromagnetic fields (PEMFs) and stimuli-responsive piezoelectric properties of scaffolds have been investigated separately to evaluate their efficacy in supporting osteogenesis. However, current understanding of cells responding under the combined influence of PEMF and piezoelectric properties in scaffolds is still lacking. Therefore, in this study, we fabricated piezoelectric scaffolds by functionalization of polycaprolactone-tricalcium phosphate (PCL-TCP) films with a polyvinylidene fluoride (PVDF) coating that is self-polarized by a modified breath-figure technique. The osteoinductive properties of these PVDF-coated PCL-TCP films on MC3T3-E1 cells were studied under the stimulation of PEMF. Piezoelectric and ferroelectric characterization demonstrated that scaffolds with piezoelectric coefficient d33 = -1.2 pC/N were obtained at a powder dissolution temperature of 100 °C and coating relative humidity (RH) of 56%. DNA quantification showed that cell proliferation was significantly enhanced by PEMF as low as 0.6 mT and 50 Hz. Hydroxyapatite staining showed that cell mineralization was significantly enhanced by incorporation of PVDF coating. Gene expression study showed that the combination of PEMF and PVDF coating promoted late osteogenic gene expression marker most significantly. Collectively, our results suggest that the synergistic effects of PEMF and piezoelectric scaffolds on osteogenesis provide a promising alternative strategy for electrically augmented osteoinduction. The piezoelectric response of PVDF by PEMF, which could provide mechanical strain, is particularly interesting as it could deliver local mechanical stimulation to osteogenic cells using PEMF.

Fabrication of bioactive glass coating on pure titanium by sol-dip method: Dental applications

This study aimed to assess the mechanical and biological properties of bioactive glass (BG) coating on titanium (Ti). Bioinert Ti substrates were coated by BG to induce bioactivity to the surface. The sol-gel derived BG 58S sol was successfully prepared and coated on the abraded and blasted Ti surface using the sol-dip method. The characterization and cell study for all substrates' surface was carried out. Adhesion test confirmed that a firmly adhered BG coating layer was formed on the abraded and blasted Ti. The measured bonding strength between the coating and the blasted Ti substrate was the highest among all samples, which was 41.03±2.31 MPa. In-vitro cell viability and alkaline phosphatase activity (ALP) tests results also showed that BG coating on the Ti substrate improved the biological properties of the surface. The BG sol-dip coating method could be used to fabricate Ti substrate with a bioactive surface.

Biocompatibility and Cellular Behavior of TiNbTa Alloy with Adapted Rigidity for the Replacement of Bone Tissue

In this work, the mechanical and bio-functional behavior of a TiNbTa alloy is evaluated as a potential prosthetic biomaterial used for cortical bone replacement. The results are compared with the reference Ti c.p. used as biomaterials for bone-replacement implants. The estimated mechanical behavior for TiNbTa foams was also compared with the experimental Ti c.p. foams fabricated by the authors in previous studies. A TiNbTa alloy with a 20–30% porosity could be a candidate for the replacement of cortical bone, while levels of 80% would allow the manufacture of implants for the replacement of trabecular bone tissue. Regarding biocompatibility, in vitro TiNbTa, cellular responses (osteoblast adhesion and proliferation) were compared with cell growth in Ti c.p. samples. Cell adhesion (presence of filopodia) and propagation were promoted. The TiNbTa samples had a bioactive response similar to that of Ti c.p. However, TiNbTa samples show a better balance of bio-functional behavior (promoting osseointegration) and biomechanical behavior (solving the stress-shielding phenomenon and guaranteeing mechanical resistance).

Mechanical properties and biocompatibility of titanium with a high oxygen concentration for dental implants

In order to improve the strength of commercially pure Ti (CP-Ti) for oral implants, the high oxygen content Ti (HOC-Ti) was prepared via powder metallurgy. Its composition and mechanical properties were then characterized. After surface treatment by sandblasting and acid etching (SLA), the surface morphology, wettability and roughness of the HOC-Ti and CP-Ti sample were examined. In an in vitro test that followed an evaluation of the protein adsorption capacity of HOC-Ti, the mouse preosteoblast cells were inoculated onto the specimens to evaluate their biocompatibility, in comparison with those of CP-Ti. The oxygen concentration of the HOC-Ti increased to 0.62 wt%, which is higher than the 0.26 wt% of the CP-Ti, while their compositions and microstructures were very similar. The tensile and compressive yield strength of the HOC-Ti (800 MPa) was improved significantly in comparison to that of the CP-Ti (530 MPa). After surface treatment, a unique structure of micropores with a diameter of 380 nm was observed on the entire surface of the HOC-Ti that facilitates cell adhesion and proliferation. The wettability of the HOC-Ti was obviously superior (p < 0.05). The in vitro study showed that the MC3T3-E1 cells inoculated on the surface of HOC-Ti exhibited a homogeneous microstructure, and the viability was higher than that of the control group on days 4 and 7 (p < 0.05). In addition, the number and differentiation activity of cells that adhered to the surface of the HOC-Ti increased significantly on day 7 (p < 0.05). The experimental results showed that, in view of its mechanical properties and biocompatibility, HOC-Ti is superior to CP-Ti and is promising for oral implant applications.

Amine Derivative from the Aerial Part of Spilanthes acmella Murr. and their Alkaline Phosphatase Activity

Background:

Spilanthes acmella Murr. is included in Asteraceae family which is used as a traditional remedy for tooth-aches, and originated from Africa, America, Borneo, India, Sri Lanka, Bangladesh, China, Japan, Thailand, and Indonesia. The present research aims to isolate the amine derivative from the ethyl acetate layer of this plant and to evaluate the isolated compounds of alkaline phosphatase activity as a sign of bone formation.

Methods:

The air-dried plants of Spilanthes acmella Murr. were extracted with methanol, then partitioned with n-hexane and ethyl acetate successively by using liquid-liquid extraction, and then the chromatographic techniques were repeated, such as silica gel, octadecyl silylated silica gel, and HPLC. The isolated compounds were determined by spectrometric analysis using ultraviolet, infrared, high-resolution electrospray ionization mass spectrometry, 1D and 2D NMR.

Results:

Benzenepropanoic acid, 4 hydroxy-2-oxo-3 piperidinyl ester (1), was isolated from the ethyl acetate layer of the whole plants of Spilanthes acmella Murr. together with dendranthemoside A (2), uridine (3), icariside B2 (4), chicoriin (5), dendranthemoside B (6), and ampelopsisionoside (7) from their butanol layer.

Conclusion:

An amine derivative, a benzenepropanoic acid that determined as 4 hydroxy-2-oxo-3 piperidinyl ester (1) was isolated and reported for the first time from the ethyl acetate layer of Spilanthes acmella naturally. All the isolated compounds from this plant stimulated alkaline phosphatase activity as a mark of bone formation up to 128%.

Dual delivery of platelet-derived growth factor and bone morphogenetic factor-6 on titanium surface to enhance the early period of implant osseointegration

OBJECTIVE

To test the surface properties and in vitro effects of a new sequential release system on MC3T3-E1 cells for improved osseointegration.

BACKGROUND

BMP6-loaded anodized titanium coated with PDGF containing silk fibroin (SF) may improve osseointegration.

METHODS

Titanium surfaces were electrochemically anodized, and SF layer was covered via electrospinning. Five experimental groups (unanodized Ti (Ti), anodized Ti (AnTi), anodized + BMP6-loaded Ti (AnTi-BMP6), anodized + BMP6 loaded + silk fibroin-coated Ti (AnTi-BMP6-SF), and anodized + BMP6-loaded + silk fibroin with PDGF-coated Ti (AnTi-BMP6-PDGF-SF)) were tested. After SEM characterization, contact angle analysis, and FTIR analysis, the amount of released PDGF and BMP6 was detected using ELISA. Cell proliferation (XTT), mineralization, and gene expression (RUNX2 and ALPL) were also evaluated.

RESULTS

After successful anodization and loading of PDGF and BMP6, contact angle measurements showed hydrophobicity for TiO₂ and hydrophilicity for protein-adsorbed surfaces. In FTIR, protein-containing surfaces exhibited amide-I, amide-II, and amide-III bands at 1600 cm^-1 -1700 cm^-1 , 1520 cm^-1 -1540 cm^-1 , and 1220 cm^-1 -1300 cm^-1 spectrum levels with a significant peak in BMP6- and/or SF-loaded groups at 1100 cm^-1 . PDGF release and BMP6 release were delayed, and relatively slower release was detected in SF-coated surfaces. Higher MC3T3-E1 proliferation and mineralization and lower gene expression of RUNX2 and ALPL were detected in AnTi-BMP6-PDGF-SF toward day 28.

CONCLUSION

The new system revealed a high potential for an improved early osseointegration period by means of a better factor release curve and contribution to the osteoblastic cell proliferation, mineralization, and associated gene expression.

Enhancing Activity of Pleurotus sajor-caju (Fr.) Sing β-1,3-Glucanoligosaccharide (Ps-GOS) on Proliferation, Differentiation, and Mineralization of MC3T3-E1 Cells through the Involvement of BMP-2/Runx2/MAPK/Wnt/β-Catenin Signaling Pathway

Osteoporosis is a leading world health problem that results from an imbalance between bone formation and bone resorption. β-glucans has been extensively reported to exhibit a wide range of biological activities, including antiosteoporosis both in vitro and in vivo. However, the molecular mechanisms responsible for β-glucan-mediated bone formation in osteoblasts have not yet been investigated. The oyster mushroom Pleurotus sajor-caju produces abundant amounts of an insoluble β-glucan, which is rendered soluble by enzymatic degradation using Hevea glucanase to generate low-molecular-weight glucanoligosaccharide (Ps-GOS). This study aimed to investigate the osteogenic enhancing activity and underlining molecular mechanism of Ps-GOS on osteoblastogenesis of pre-osteoblastic MC3T3-E1 cells. In this study, it was demonstrated for the first time that low concentrations of Ps-GOS could promote cell proliferation and division after 48 h of treatment. In addition, Ps-GOS upregulated the mRNA and protein expression level of bone morphogenetic protein-2 (BMP-2) and runt-related transcription factor-2 (Runx2), which are both involved in BMP signaling pathway, accompanied by increased alkaline phosphatase (ALP) activity and mineralization. Ps-GOS also upregulated the expression of osteogenesis related genes including ALP, collagen type 1 (COL1), and osteocalcin (OCN). Moreover, our novel findings suggest that Ps-GOS may exert its effects through the mitogen-activated protein kinase (MAPK) and wingless-type MMTV integration site (Wnt)/β-catenin signaling pathways.

Suppression of Notch Signaling in Osteoclasts Improves Bone Regeneration and Healing

Owing to the central role of osteoclasts in bone physiology and remodeling, manipulation of their maturation process provides a potential therapeutic strategy for treating bone diseases. To investigate this, we genetically inhibited the Notch signaling pathway in the myeloid lineage, which includes osteoclast precursors, using a dominant negative form of MAML (dnMAML) that inhibits the transcriptional complex required for downstream Notch signaling. Osteoclasts derived from dnMAML mice showed no significant differences in early osteoclastic gene expression compared to the wild type. Further, these demonstrated significantly lowered resorption activity using bone surfaces while retaining their osteoblast stimulating ability using ex vivo techniques. Using in vivo approaches, we detected significantly higher bone formation rates and osteoblast gene expression in dnMAML cohorts. Further, these mice exhibited increased bone/tissue mineral density compared to wild type and larger bony calluses in later stages of fracture healing. These observations suggest that therapeutic suppression of osteoclast Notch signaling could reduce, but not eliminate, osteoclastic resorption without suppression of restorative bone remodeling and, therefore, presents a balanced paradigm for increasing bone formation, regeneration, and healing. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2089-2103, 2019.

Loading icariin on titanium surfaces by phase-transited lysozyme priming and layer-by-layer self-assembly of hyaluronic acid/chitosan to improve surface osteogenesis ability

Purpose

Icariin (ICA) is one of the main active constituents of Herba Epimedii for improving osteogenesis. It is necessary to create a simple and efficient method to load ICA onto the surface of titanium (Ti) implant. The purpose of this study was to establish a local ICA delivery system via a layer-by-layer (LbL) self-assembly system on phase-transited lysozyme (PTL)-primed Ti surface.

Materials and methods

A PTL nanofilm was first firmly coated on the pristine Ti. Then, the ICA-loaded hyaluronic acid/chitosan (HA/CS) multilayer was applied via the LbL system to form the HA/CS-ICA surface. This established HA/CS-ICA surface was characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and contact angle measurement. The ICA release pattern of the HA/CS-ICA surface was also examined. MC3T3-E1 osteoblast culture test and a rat model were used to evaluate the effects of the HA/CS-ICA surface in vitro and in vivo.

Results

SEM, XPS and contact angle measurement demonstrated successful fabrication of the HA/CS-ICA surface. The HA/CS-ICA surfaces with different ICA concentrations revealed a controlled release profile of ICA during a 2-week monitoring span. Osteoblasts grown on the coated substrates displayed higher adhesion, viability, proliferation and ALP activity than those on the polished Ti surface. Furthermore, in vivo histological evaluation revealed much obvious bone formation in the ICA-coated group by histological staining and double fluorescent labeling at 2 weeks after implantation.

Conclusion

The present study demonstrated that ICA-immobilized HA/CS multilayer on the PTL-primed Ti surface had a sustained release pattern of ICA which could promote the osteogenesis of osteoblasts in vitro and improve early osseointegration in vivo. This study provides a novel method for creating a sustained ICA delivery system to improve osteoblast response and osseointegration.

Behavior of Human Osteoblast Cells Cultured on Titanium Discs in Relation to Surface Roughness and Presence of Melatonin

The aim of this work was to observe the behavior of osteoblast cells cultured in vitro on titanium discs in relation to disc surface roughness and the addition of melatonin to the culture medium. MG63 osteoblast cells were cultivated on 120 Grade 5 Ti divided into three groups: Group E, treated with dual acid etch; Group EP, treated with dual acid etch and calcium phosphate; and Group M, machined. Surface roughness was examined under a laser scanning confocal microscope (CLSM) and scanning electron microscopy (SEM). The proliferation and morphology of cells were determined under fluorescence microscopy and SEM. Messenger ribonucleic acid (mRNA) of different genes related to osteoblastic differentiation was quantified by means of real-time quantitative polymerase chain reaction (RT-PCR) assay. The greatest surface roughness was found in Group EP (Ra 0.354 µm), followed by Group E (Ra 0.266 µm), and Group M (Ra 0.131 µm), with statistically significant differences between the groups (p < 0.001). In the presence of melatonin a trend to a higher cell proliferation was observed in all groups although significant differences were only found in Group M (p = 0.0079). Among the genes studied, a significant increase in phosphate-regulating neutral endopeptidase, X-linked (PHEX) expression was observed in cells cultured on EP discs. The addition of melatonin increased osteoblast cell proliferation and differentiation, and may favor the osseointegration of dental implants.