A novel approach for lung delivery of rifampicin-loaded liposomes in dry powder form for the treatment of tuberculosis

Carboxylated Nanoparticle Surfaces Enhance Association with Mucoid Pseudomonas aeruginosa Biofilms

Pseudomonas aeruginosa biofilms comprise three main polysaccharides: alginate, psl, and pel, which all imbue tolerance against exogenous antimicrobials. Nanoparticles (NPs) are an exciting new strategy to overcome the biofilm matrix for therapeutic delivery applications; however, zero existing FDA approvals for biofilm-specific NP formulations can be attributed to the complex interplay of physiochemical forces at the biofilm-NP interface. Here, we leverage a set of inducible, polysaccharide-specific, expressing isogenic P. aeruginosa mutants coupled with an assembled layer-by-layer NP (LbL NP) panel to characterize biofilm-NP interactions. When investigating these interactions using confocal microscopy, alginate-layered NPs associated more than dextran-sulfate-layered NPs with biofilms that had increased alginate production, including biofilms produced by mucoid P. aeruginosa isolates from people with cystic fibrosis. These differences were further confirmed in LbL NPs layered with polysaccharide- or hydrocarbon-based polymers with pendent carboxylate or sulfate functional groups. These data suggest carboxylated NP surfaces have enhanced interactions specifically with mucoid biofilms as compared to sulfated surfaces and lay the foundation for their inclusion as a design element for increasing biofilm-NP interactions and efficacious drug delivery.

Long-acting inhaled medicines: Present and future

Inhaled medicines continue to be an essential part of treatment for respiratory diseases such as asthma, chronic obstructive pulmonary disease, and cystic fibrosis. In addition, inhalation technology, which is an active area of research and innovation to deliver medications via the lung to the bloodstream, offers potential advantages such as rapid onset of action, enhanced bioavailability, and reduced side effects for local treatments. Certain inhaled macromolecules and particles can also end up in different organs via lymphatic transport from the respiratory epithelium. While the majority of research on inhaled medicines is focused on the delivery technology, particle engineering, combination therapies, innovations in inhaler devices, and digital health technologies, researchers are also exploring new pharmaceutical technologies and strategies to prolong the duration of action of inhaled drugs. This is because, in contrast to most inhaled medicines that exert a rapid onset and short duration of action, long-acting inhaled medicines (LAIM) improve not only the patient compliance by reducing the dosing frequency, but also the effectiveness and convenience of inhaled therapies to better manage patients' conditions. This paper reviews the advances in LAIM, the pharmaceutical technologies and strategies for developing LAIM, and emerging new inhaled modalities that possess a long-acting nature and potential in the treatment and prevention of various diseases. The challenges in the development of the future LAIM are also discussed where active research and innovations are taking place.

Advanced drug delivery and therapeutic strategies for tuberculosis treatment

Tuberculosis (TB) remains a significant global health challenge, necessitating innovative approaches for effective treatment. Conventional TB therapy encounters several limitations, including extended treatment duration, drug resistance, patient noncompliance, poor bioavailability, and suboptimal targeting. Advanced drug delivery strategies have emerged as a promising approach to address these challenges. They have the potential to enhance therapeutic outcomes and improve TB patient compliance by providing benefits such as multiple drug encapsulation, sustained release, targeted delivery, reduced dosing frequency, and minimal side effects. This review examines the current landscape of drug delivery strategies for effective TB management, specifically highlighting lipid nanoparticles, polymer nanoparticles, inorganic nanoparticles, emulsion-based systems, carbon nanotubes, graphene, and hydrogels as promising approaches. Furthermore, emerging therapeutic strategies like targeted therapy, long-acting therapeutics, extrapulmonary therapy, phototherapy, and immunotherapy are emphasized. The review also discusses the future trajectory and challenges of developing drug delivery systems for TB. In conclusion, nanomedicine has made substantial progress in addressing the challenges posed by conventional TB drugs. Moreover, by harnessing the unique targeting abilities, extended duration of action, and specificity of advanced therapeutics, innovative solutions are offered that have the potential to revolutionize TB therapy, thereby enhancing treatment outcomes and patient compliance.

Nanocarriers in Tuberculosis Treatment: Challenges and Delivery Strategies

The World Health Organization identifies tuberculosis (TB), caused by Mycobacterium tuberculosis, as a leading infectious killer. Although conventional treatments for TB exist, they come with challenges such as a heavy pill regimen, prolonged treatment duration, and a strict schedule, leading to multidrug-resistant (MDR) and extensively drug-resistant (XDR) strains. The rise of MDR strains endangers future TB control. Despite these concerns, the hunt for an efficient treatment continues. One breakthrough has been the use of nanotechnology in medicines, presenting a novel approach for TB treatment. Nanocarriers, such as lipid nanoparticles, nanosuspensions, liposomes, and polymeric micelles, facilitate targeted delivery of anti-TB drugs. The benefits of nanocarriers include reduced drug doses, fewer side effects, improved drug solubility, better bioavailability, and improved patient compliance, speeding up recovery. Additionally, nanocarriers can be made even more targeted by linking them with ligands such as mannose or hyaluronic acid. This review explores these innovative TB treatments, including studies on nanocarriers containing anti-TB drugs and related patents.

Mycobacterial lipid-derived immunomodulatory drug- liposome conjugate eradicates endosome-localized mycobacteria

Tuberculosis is a challenging disease due to the intracellular residence of its pathogen, Mycobacterium tuberculosis, and modulation of the host bactericidal responses. Lipids from Mycobacterium tuberculosis regulate macrophage immune responses dependent on the infection stage and intracellular location. We show that liposomes constituted with immunostimulatory lipids from mycobacteria modulate the cellular immune response and synergize with sustained drug delivery for effective pathogen eradication. We evaluate the pH-dependent release of Rifampicin from the mycobacterial-lipid-derived liposomes intracellularly and in vitro, their cell viability, long-term stability, and antimicrobial efficacy. Intracellular drug levels were higher following liposome treatment compared with the free drug in a temporal fashion underlying a sustained release. The drug-encapsulated liposomes were taken up by clathrin-mediated endocytosis and elicited a robust pro-inflammatory immune response while localizing in the recycling and late endosomes. Notably, these were the same cellular compartments that contained the pathogen underlying localized intracellular targeting. Our results also imply a lipid-centric and species-specific selectivity of the liposomal drug formulations. This work provides a proof-of-concept for the dual-action of liposomes derived from the pathogen itself for their effective eradication, in conjunction with the attuned host immunomodulation.

Mucoadhesive Rifampicin-Liposomes for the Treatment of Pulmonary Infection by Mycobacterium abscessus: Chitosan or ε-Poly-L-Lysine Decoration

Mycobacterium abscessus (Mabs) is a dangerous non-tubercular mycobacterium responsible for severe pulmonary infections in immunologically vulnerable patients, due to its wide resistance to many different antibiotics which make its therapeutic management extremely difficult. Drug nanocarriers as liposomes may represent a promising delivery strategy against pulmonary Mabs infection, due to the possibility to be aerosolically administrated and to tune their properties in order to increase nebulization resistance and retainment of encapsulated drug. In fact, liposome surface can be modified by decoration with mucoadhesive polymers to enhance its stability, mucus penetration and prolong its residence time in the lung. The aim of this work is to employ Chitosan or ε-poly-L-lysine decoration for improving the properties of a novel liposomes composed by hydrogenated phosphatidyl-choline from soybean (HSPC) and anionic 1,2-Dipalmitoyl-sn-glycero-3-phosphorylglycerol sodium salt (DPPG) able to entrap Rifampicin. A deep physicochemical characterization of polymer-decorated liposomes shows that both polymers improve mucoadhesion without affecting liposome features and Rifampicin entrapment efficiency. Therapeutic activity on Mabs-infected macrophages demonstrates an effective antibacterial effect of ε-poly-L-lysine liposomes with respect to chitosan-decorated ones. Altogether, these results suggest a possible use of ε-PLL liposomes to improve antibiotic delivery in the lung.

A Micro-Configured Multiparticulate Reconstitutable Suspension Powder of Fixed Dose Rifampicin and Pyrazinamide: Optimal Fabrication and In Vitro Quality Evaluation

The scarcity of age-appropriate pharmaceutical formulations is one of the major challenges impeding successful management of tuberculosis (TB) prevalence in minors. To this end, we designed and assessed the quality of a multiparticulate reconstitutable suspension powder containing fixed dose rifampicin and pyrazinamide (150 mg/300 mg per 5 mL) which was prepared employing solid−liquid direct dispersion coupled with timed dehydration, and mechanical pulverization. The optimized formulation had a high production yield (96.000 ± 3.270%), displayed noteworthy powder flow quality (9.670 ± 1.150°), upon reconstitution the suspension flow property was non-Newtonian and was easily redispersible with gentle manual agitation (1.720 ± 0.011 strokes/second). Effective drug loading was attained for both pyrazinamide (97.230 ± 2.570%w/w) and rifampicin (97.610 ± 0.020%w/w) and drug release followed a zero-order kinetic model (R2 = 0.990) for both drugs. Microscopic examinations confirmed drug encapsulation efficiency and showed that the particulates were micro-dimensional in nature (n < 700.000 µm). The formulation was physicochemically stable with no chemically irreversible drug-excipient interactions based on the results of characterization experiments performed. Findings from organoleptic evaluations generated an overall rating of 4.000 ± 0.000 for its attractive appearance and colour 5.000 ± 0.000 confirming its excellent taste and extremely pleasant smell. Preliminary cytotoxicity studies showed a cell viability above 70.000% which indicates that the FDC formulation was biocompatible. The optimized formulation was environmentally stable either as a dry powder or reconstituted suspension. Accordingly, a stable and palatable FDC antimycobacterial reconstitutable oral suspension powder, intended for flexible dosing in children and adolescents, was optimally fabricated.

A facile one-step jet-millingapproach for the preparation of proliposomal dry powder for inhalationaseffective delivery system for anti-TBtherapeutics

Objective: Physicochemical characterization and assessmentof aerosol dispersion performance of anti-TB proliposome dry powders for inhalation (DPIs) prepared using a single-step jet-milling (JM) approach. Significance: Conventional tuberculosis treatment involves isoniazid and rifampicin as first-line agents in extended oral multi-drug regimes. Liposomal DPIs are emerging as promising alternatives for targeted delivery of anti-TB agents to alveolar macrophages harboring Mycobacterium tuberculosis. However, traditional approaches for liposomal DPI preparation are tedious, time consuming and require sophisticated/expensive equipment. The proposed JM technique for preparation of proliposome DPIs could obviate these limitations and facilitate use of these drugs for more effective and safer treatment. Methods: Proliposome DPIs containing isoniazid and/or rifampicin, cholesterol and cholesterol sulfate were successfully prepared via JM (injection pressure, 7.4 bar; milling pressure, 3.68 bar). Their physicochemical, content uniformity, and in vitro aerosol dispersion performance were assessed using scanning electron microscopy/energy-dispersive X-ray spectroscopy, transmission electron microscopy, dynamic light scattering/Zeta potential, X-ray diffraction spectroscopy, thermogravimetric analysis, high performance liquid chromatography, and the Next Generation Impactor. Results: The DPIs exhibited consistent, spherically shaped, smooth particles. Drug particles were evenly distributed with acceptable content uniformity. Drug crystallinity was not significantly affected by milling and the formulations had minimal (<2.0%) water content. After reconstitution of theDPIs, the hydrodynamic size was about 370.9 - 556.2nm and charge was-12.3 - -47.3mV. Furthermore, the proliposome DPIs presented emitted dose (69.04 - 89.03%), fine particle fraction,< 4.4 µm (13.7 - 57.8%), and mass median aerodynamic diameter (<3.0 µm), which satisfied the requirements for deep lung delivery. Conclusion: The proposed approach was suitable for preparation of proliposome DPIs that could be deployed for local targeting of the lower respiratory tract for treatment of tuberculosis.

Review: Liposomes in the prophylaxis and treatment of infectious diseases

Infectious diseases remain as one of the major burdens among health communities as well as in the general public despite the advances in prevention and treatment. Although vaccination and vector eliminations have greatly prevented the transmission of these diseases, the effectiveness of these strategies is no longer guaranteed as new challenges such as drug resistance and toxicity as well as the missing effective therapeutics arise. Hence, the development of new tools to manage these challenges is anticipated, in which nano technology using liposomes as effective nanostructure is highly considered. In this review, we concentrate on the advantages of liposomes in the drug delivery system and the development of vaccine in the treatment of three major infectious diseases; tuberculosis (TB), malaria and HIV.

Nanocarrier-Based Approaches for the Efficient Delivery of Anti-Tubercular Drugs and Vaccines for Management of Tuberculosis

Drug-resistant species of tuberculosis (TB), which spread faster than traditiona TB, is a severely infectious disease. The conventional drug therapy used in the management of tuberculosis has several challenges linked with adverse effects. Hence, nanotherapeutics served as an emerging technique to overcome problems associated with current treatment. Nanotherapeutics helps to overcome toxicity and poor solubility issues of several drugs used in the management of tuberculosis. Due to their diameter and surface chemistry, nanocarriers encapsulated with antimicrobial drugs are readily taken up by macrophages. Macrophages play a crucial role as they serve as target sites for active and passive targeting for nanocarriers. The surface of the nanocarriers is coated with ligand-specific receptors, which further enhances drug concentration locally and indicates the therapeutic potential of nanocarriers. This review highlights tuberculosis's current facts, figures, challenges associated with conventional treatment, different nanocarrier-based systems, and its application in vaccine development.

2Receptor Specific Ligand conjugated Nanocarriers: an Effective Strategy for Targeted Therapy of Tuberculosis

Tuberculosis (TB) is an ancient chronic disease caused by the bacillus Mycobacterium tuberculosis, which has affected mankind for more than 4,000 years. Compliance with the standard conventional treatment can assure recovery from tuberculosis, but emergence of drug resistant strains pose a great challenge for effective management of tuberculosis. The process of discovery and development of new therapeutic entities with better specificity and efficacy is unpredictable and time consuming. Hence, delivery of pre-existing drugs with improved targetability is the need of the hour. Enhanced delivery and targetability can ascertain improved bioavailability, reduced toxicity, decreased frequency of dosing and therefore better patient compliance. Nanoformulations are being explored for effective delivery of therapeutic agents, however optimum specificity is not guaranteed. In order to achieve specificity, ligands specific to receptors or cellular components of macrophage and Mycobacteria can be conjugatedto nanocarriers. This approach can improve localization of existing drug molecules at the intramacrophageal site where the parasites reside, improve targeting to the unique cell wall structure of Mycobacterium or improve adhesion to epithelial surface of intestine or alveolar tissue (lectins). Present review focuses on the investigation of various ligands like Mannose, Mycolic acid, Lectin, Aptamers etc. installed nanocarriers that are being envisaged for targeting antitubercular drugs.

Application of Lipid-Based Nanocarriers for Antitubercular Drug Delivery: A Review

The antimicrobial drugs currently used for the management of tuberculosis (TB) exhibit poor bioavailability that necessitates prolonged treatment regimens and high dosing frequency to achieve optimal therapeutic outcomes. In addition, these agents cause severe adverse effects, as well as having detrimental interactions with other drugs used in the treatment of comorbid conditions such as HIV/AIDS. The challenges associated with the current TB regimens contribute to low levels of patient adherence and, consequently, the development of multidrug-resistant TB strains. This has led to the urgent need to develop newer drug delivery systems to improve the treatment of TB. Targeted drug delivery systems provide higher drug concentrations at the infection site, thus leading to reduced incidences of adverse effects. Lipid-based nanocarriers have proven to be effective in improving the solubility and bioavailability of antimicrobials whilst decreasing the incidence of adverse effects through targeted delivery. The potential application of lipid-based carriers such as liposomes, niosomes, solid lipid nanoparticles, nanostructured lipid carriers, nano and microemulsions, and self-emulsifying drug delivery systems for the treatment of TB is reviewed herein. The composition of the investigated lipid-based carriers, their characteristics, and their influence on bioavailability, toxicity, and sustained drug delivery are also discussed. Overall, lipid-based systems have shown great promise in anti-TB drug delivery applications. The summary of the reviewed data encourages future efforts to boost the translational development of lipid-based nanocarriers to improve TB therapy.

Efficacy of Combined Rifampicin Formulations Delivered by the Pulmonary Route to Treat Tuberculosis in the Guinea Pig Model

Liposomes, as vehicles alone or in combination with rifampicin (RIF) microparticles (RMs), were evaluated as vehicles to enhance the permeation of RIF into granulomas. RIF liposomes (RLs) were extruded through a 0.1 µm polypropylene membrane. RMs were prepared by the solvent evaporation method. Four weeks after infection, guinea pigs (GPs) were assigned to groups treated with a combination of RM-RLs or RLs alone. RLs were nebulized after extrusion whereas RMs were suspended in saline and nebulized to GPs in a nose-only inhalation chamber. Necropsy was performed after the treatment; the lungs and spleen were resected for bacteriology. RLs had mean diameters of 137.1 ± 33.7 nm whereas RMs had a projected area diameter of 2.48 µm. The volume diameter of RMs was 64 ± 1 µm, indicating that RMs were aggregated. The treatment of TB-infected GPs with RLs significantly reduced their lung bacterial burden and wet spleen weight compared with those treated with blank liposomes. The treatment of TB-infected animals with RM-RLs also reduced their lung bacterial burden and wet spleen weight even though these reductions were not statistically different. Based on these results, the permeation of RIF into granulomas appears to be enhanced when encapsulated into liposomes delivered by the pulmonary route.

Overcoming barriers by local drug delivery with liposomes

Localized or topical administration of drugs may be considered as a potential approach for overcoming the problems caused by the various biological barriers encountered in drug delivery. The combination of using localized administration routes and delivering drugs in nanoparticulate formulations, such as liposomes, may have additional advantages. Such advantages include prolonged retention of high drug loads at the site of action and controlled release of the drug, ensuring prolonged therapeutic effect; decreased potential for side-effects and toxicity (due to the high topical concentrations of drugs); and increased protection of drugs from possible harsh environments at the site of action. The use of targeted liposomal formulations may further potentiate any acquired therapeutic advantages. In this review we present the most advanced cases of localized delivery of liposomal formulations of drugs, which have been investigated pre-clinically and clinically in the last ten years, together with the reported therapeutic advantages, in each case.

Inhaled Liposomal Antimicrobial Delivery in Lung Infections

The management of difficult-to-treat acute and chronic respiratory infections (infections in cystic fibrosis, non-cystic fibrosis bronchiectasis, immunocompromised and mechanically ventilated patients) and difficult-to-treat pathogens (including multidrug-resistant strains) has become a challenge in clinical practice. The arsenal of conventional antibiotic drugs can be limited by tissue penetration, toxicities, or increasing antibiotic resistance. Inhaled antimicrobials are an interesting therapeutic approach for optimizing the management of respiratory infections. Due to extensive developments in liposome technology, a number of inhaled liposome-based antibiotic and antifungal formulations are available for human use and many products are undergoing clinical trials. Liposomes are biocompatible, biodegradable, and nontoxic vesicles able to encapsulate and carry antimicrobials, enhancing the therapeutic index of various agents and retention at the desired target within the lung. Liposomes reduce drug toxicity and improve tolerability, leading to better compliance and to decreased respiratory side effects. The aim of this article was to provide an up-to-date overview of nebulized liposomal antimicrobials for lung infections (with a special focus on liposomal amikacin, tobramycin, ciprofloxacin, and amphotericin B for inhalation), discussing the feasibility and therapeutic potential of these new strategies of preventing and treating bacteria, mycobacterial and fungal infections.

Pulmonary drug delivery with aerogels: engineering of alginate and alginate-hyaluronic acid microspheres

In this study, the aerogel technology was used to prepare pulmonary drug carriers consisting of alginate and alginate-hyaluronic acid by an emulsion gelation technique and supercritical CO₂ drying. During the preparation process, the emulsification rate and inner phase viscosity were varied to control the diameter of aerogel microspheres. Results showed that the aerogel microspheres were highly porous (porosity > 98%) with low densities in the range between 0.0087 and 0.0634 g/cm³ as well as high surface areas between 354 and 759 m²/g. The obtained microspheres showed aerodynamic diameter below 5 µm making them suitable for pulmonary drug delivery. An in vitro drug release study with the model drug sodium naproxen was conducted and a non-Fickian drug release mechanism was observed, with no significant difference between the release profiles of alginate and alginate-hyaluronic acid microspheres. During the emulsion gelation step, the feasibility of using the capillary number to estimate the largest stable droplet size in the emulsions was also studied and it was found that using this number, the droplet size in the emulsions may well be predicted.

Air-jet spinning corn zein protein nanofibers for drug delivery: Effect of biomaterial structure and shape on release properties

Nanofiber materials are commonly used as delivery vehicles for dermatological drugs due to their high surface-area-to-volume ratio, porosity, flexibility, and reproducibility. In this study air-jet spinning was used as a novel and economic method to fabricate corn zein nanofiber meshes with model drugs of varying solubility, molecular weight and charge. The release profiles of these drugs were compared to their release from corn zein films to elucidate the effect of geometry and structure on drug delivery kinetics. In film samples, over 50% of drug was released after only 2 h. However, fiber samples exhibited more sustained release, releasing less than 50% after one day. FTIR, SEM, and DSC were performed on nanofibers and films before and after release of the drugs. Structural analysis revealed that the incorporation of model drugs into the fibers would transform the zein proteins from a random coil network to a more alpha helical structure. Upon release, the protein fiber reverted to its original random coil network. In addition, thermal analysis indicated that fibers can protect the drug molecules in high temperature above 160 °C, while drugs within films will degrade below 130 °C. These findings can likely be attributed to the mechanical infiltration of the drug molecules into the ordered structure of the zein fibers during their solution fabrication. The slow release from fiber samples can be attributed to this biophysical interaction, illustrating that release is dictated by more than diffusion in protein-based carriers. The controlled release of a wide variety of drugs from the air-jet spun corn zein nanofiber meshes demonstrates their success as drug delivery vehicles that can potentially be incorporated into different biological materials in the future.

(Solvato-) polymorphism of formulations of rifampicin for pulmonary drug delivery prepared using a crystallization/spray drying process

Rifampicin is an antibiotic used in tuberculosis therapy showing extensive (solvato-) polymorphism. Per oral administration of high doses is recommended, but application as dry powder for inhalation at the site of infection being the lungs, is desirable. Recrystallization from ethanol and consecutive spray drying is reported to yield a rifampicin dihydrate with suitable aerosol performance and stability. Nevertheless, the origin of water in the crystal remained unclear and demanded further investigation so to clarify its solid state throughout manufacture and storage. The present study reports the relationship of (solvato-) polymorphs occurring during manufacture and storage of samples recrystallized and spray dried from ethanol, methanol and water and it was concluded that processes involving a recrystallization from EtOH and MeOH produce particles of a common isostructural group of channel solvates. Samples recrystallized and spray dried from water were identified as members of another isostructural group, which was already characterized in literature. As a second aim, aerosol performance and storage stability of the formulations were investigated and all samples showed stable aerosol performance. Chemical stability of samples spray dried from ethanol was found suitable over a period of six months, whereas samples spray dried from methanol or water showed significant degradation.

Preparation of Hybrid Alginate-Chitosan Aerogel as Potential Carriers for Pulmonary Drug Delivery

This study aims to prepare hybrid chitosan-alginate aerogel microparticles without using additional ionic crosslinker as a possible pulmonary drug delivery system. The microparticles were prepared using the emulsion gelation method. The effect of the mixing order of the biopolymer within the emulsion and the surfactant used on final particle properties were investigated. Physicochemical characterizations were performed to evaluate particle size, density, morphology, surface area, surface charge, and the crystallinity of the preparation. The developed preparation was evaluated for its acute toxicity in adult male Sprague-Dawley rats. Measurements of zeta potential suggest that the surface charge depends mainly on the surfactant type while the order of biopolymer mixing has less impact on the surface charge. Chitosan amphiphilic properties changed the hydrophilic-lipophilic balance (HLB) of the emulsifying agents. The specific surface area of the prepared microparticles was in the range of (29.36-86.20) m²/g with a mesoporous pore size of (12.48-13.38) nm and pore volume of (0.09-0.29) cm³/g. The calculated aerodynamic diameter of the prepared particles was in the range of (0.17-2.29 µm). Toxicity studies showed that alginate-chitosan carrier developed herein caused mild lung inflammation with some renal and hepatic toxicities.

Liposomes for Antibiotic Encapsulation and Delivery

When antibiotics are administered, orally or intravenously, they pass through different organs and layers of tissue on their way to the site of infection; this can cause dilution and/or intoxication. To overcome these problems, drug delivery vehicles have been used to encapsulate and deliver antibiotics, improving their therapeutic index while minimizing their adverse effects. Liposomes are self-assembled lipid vesicles made from at least one bilayer of phospholipids with an inner aqueous compartment. Liposomes are attractive vehicles to deliver antibiotics because they can encapsulate both hydrophobic and hydrophilic antibiotics, they have low toxicity, and they can change the biodistribution of the drug. Furthermore, liposomes have been approved by regulatory agencies. However, most developmental and mechanistic research in the field has been focused on encapsulation and delivery of anticancer drugs, a class of molecules that differ significantly in chemistry from antibiotics. In this critical Review, we discuss the state of knowledge regarding the design of liposomes for encapsulation and delivery of antibiotics and offer insight into the challenges and promises of using liposomes for antibiotic delivery.

Gut Check Time: Antibiotic Delivery Strategies to Reduce Antimicrobial Resistance

Antimicrobial resistance (AMR) has developed into a huge threat to global health, and reducing it is an urgent priority for public health authorities. The importance of a healthy and balanced gut microbiome has been identified as a key protective factor against AMR development, but this can be significantly affected by antibiotic therapy, resulting in dysbiosis and reduction of taxonomic richness. The way in which antibiotics are administered could form an important part of future antimicrobial stewardship strategies, where drug delivery is ideally placed to play a key role in the fight against AMR. This review focuses on drug delivery strategies for antibiotic administration, including avoidance of the gut microbiome and targeted delivery approaches, which may reduce AMR.

Potential application of liposomal nanodevices for non-cancer diseases: an update on design, characterization and biopharmaceutical evaluation

Liposomes, lipid-based vesicular systems, have attracted major interest as a means to improve drug delivery to various organs and tissues in the human body. Recent literature highlights the benefits of liposomes for use as drug delivery systems, including encapsulating of both hydrophobic and hydrophilic cargos, passive and active targeting, enhanced drug bioavailability and therapeutic effects, reduced systemic side effects, improved cargo penetration into the target tissue and triggered contents release. Pioneering work of liposomes researchers led to introduction of long-circulating, ligand-targeted and triggered release liposomes, as well as, liposomes containing nucleic acids and vesicles containing combination of cargos. Altogether, these findings have led to widespread application of liposomes in a plethora of areas from cancer to conditions such as cardiovascular, neurologic, respiratory, skin, autoimmune and eye disorders. There are numerous review articles on the application of liposomes in treatment of cancer, which seems the primary focus, whereas other diseases also benefit from liposome-mediated treatments. Therefore, this article provides an illustrated detailed overview of liposomal formulations, in vitro characterization and their applications in different disorders other than cancer. Challenges and future directions, which must be considered to obtain the most benefit from applications of liposomes in these disorders, are discussed.

Inhalable dry powders of rifampicin highlighting potential and drawbacks in formulation development for experimental tuberculosis aerosol therapy

Introduction: Recently, tuberculosis was reported as the leading cause of death from a single infectious agent. Standard therapy includes administration of four first-line antibiotics, i.e. rifampicin, isoniazid, ethambutol, and pyrazinamide over a period of at least 26 weeks, which in case of rifampicin oftentimes is accompanied by unwanted side effects and variable bioavailability that compromise a positive therapeutic outcome. As the main site of infection is the lungs, it is desirable to develop a therapeutic formulation to be administered via the pulmonary route.Areas covered: This work presents a literature review on studies investigating inhalable dry powder formulations including rifampicin in the context of an experimental tuberculosis therapy, with a special focus on aerosol performance.Expert opinion: It was found that formulation approaches involving different strategies and functional excipients are under investigation but as of now, no formulation has managed to leap into commercial clinical testing. Reasons for this might not primarily be associated with a lack of suitable candidates, but amongst others a lack of suitable in vitro models to assess the efficacy, therapeutic benefit, and cost-effectiveness of the candidate formulations.

Cardioprotective Efficacy of Silymarin Liquisolid in Isoproterenol Prompted Myocardial Infarction in Rats

Myocardial infarction (MI) is the principal cause of death in many countries. Silymarin (SM) is a herbal antioxidant and can be efficiently used in preventing cardiovascular diseases (CVDs). The study is aimed to enhance the absorption rate and biological activity of SM by using liquisolids besides investigating the cardioprotective activity of SM and its selected liquisolid formula against isoproterenol prompted cardiotoxicity in rats. Eight formulae were prepared according to (2³) full-factorial design. The effect of viscosity increasing agent type and concentration, as well as the carrier/coat ratio on the dissolution rate and angle of repose were studied. All formulae were tested for content uniformity, micromeritic properties, dissolution performance besides the evaluation of its physicochemical properties, and scanning electron microscopy (SEM). Based on the factorial design outcomes, the highest desirability was obtained from F3 with excipient ratio value (R) of 20%, dissolution rate at Q_5 min of 26.9%, and angle of repose of 19. Oral administration of F3 liquisolid and SM revealed a significant protective efficacy against the modification of cardiac plasma markers, brain natriuretic peptide (BNP), interleukin-10 (IL-10), vascular endothelial growth factor (VEGF), and transforming growth factor (TGF)-β1 besides cardiac superoxide dismutase (SOD), malondialdehyde (MDA), and total protein kinase-1 (Akt-1) levels. Additionally, they minimized cardiac inducible nitric oxide synthase (iNOS), microRNA-34a (miR-34a), and p38 mitogen-activated protein kinase (p38-MAPK) levels. In conclusion, F3 liquisolid compact possessed an overall pronounced results over pure SM reckoned to its enhanced solubility and efficacy.

Targeted therapy in chronic diseases using nanomaterial-based drug delivery vehicles

The application of nanomedicines is increasing rapidly with the promise of targeted and efficient drug delivery. Nanomedicines address the shortcomings of conventional therapy, as evidenced by several preclinical and clinical investigations indicating site-specific drug delivery, reduced side effects, and better treatment outcome. The development of suitable and biocompatible drug delivery vehicles is a prerequisite that has been successfully achieved by using simple and functionalized liposomes, nanoparticles, hydrogels, micelles, dendrimers, and mesoporous particles. A variety of drug delivery vehicles have been established for the targeted and controlled delivery of therapeutic agents in a wide range of chronic diseases, such as diabetes, cancer, atherosclerosis, myocardial ischemia, asthma, pulmonary tuberculosis, Parkinson's disease, and Alzheimer's disease. After successful outcomes in preclinical and clinical trials, many of these drugs have been marketed for human use, such as Abraxane®, Caelyx®, Mepact®, Myocet®, Emend®, and Rapamune®. Apart from drugs/compounds, novel therapeutic agents, such as peptides, nucleic acids (DNA and RNA), and genes have also shown potential to be used as nanomedicines for the treatment of several chronic ailments. However, a large number of extensive clinical trials are still needed to ensure the short-term and long-term effects of nanomedicines in humans. This review discusses the advantages of various drug delivery vehicles for better understanding of their utility in terms of current medical needs. Furthermore, the application of a wide range of nanomedicines is also described in the context of major chronic diseases.

Liposomal Nanovesicles for Efficient Encapsulation of Staphylococcal Antibiotics

Liposomes are attractive vehicles for localized delivery of antibiotics. There exists, however, a gap in knowledge when it comes to achieving high liposomal loading efficiencies for antibiotics. To address this issue, we investigated three antibiotics of clinical relevance against staphylococcal infections with different hydrophilicity and chemical structure, namely, vancomycin hydrochloride, teicoplanin, and rifampin. We categorized the suitability of different encapsulation techniques on the basis of encapsulation efficiency, lipid requirement (important for avoiding lipid toxicity), and mass yield (percentage of mass retained during the preparation process). The moderately hydrophobic (teicoplanin) and highly hydrophobic (rifampin) antibiotics varied significantly in their encapsulation load (max 23.4 and 15.5%, respectively) and mass yield (max 74.1 and 71.8%, respectively), favoring techniques that maximized partition between the aqueous core and the lipid bilayer or those that produce oligolamellar vesicles, whereas vancomycin hydrochloride, a highly hydrophilic molecule, showed little preference to any of the protocols. In addition, we report significant bias introduced by the choice of analytical method adopted to quantify the encapsulation efficiency (underestimation of up to 24% or overestimation by up to 57.9% for vancomycin and underestimation of up to 61.1% for rifampin) and further propose ultrafiltration and bursting by methanol as the method with minimal bias for quantification of encapsulation efficiency in liposomes. The knowledge generated in this work provides critical insight into the more practical, albeit less investigated, aspects of designing vesicles for localized antibiotic delivery and can be extended to other nanovehicles that may suffer from the same biases in analytical protocols.

Selective drug deposition in lungs through pulmonary drug delivery system for effective management of drug-resistant TB

INTRODUCTION

The emergence of multidrug-resistant tuberculosis (MDR-TB) and extensively drug-resistant tuberculosis (XDR-TB) is a major health issue and continues to be a global health concern. Despite significant advancements in treatment modalities, ~1.6 million deaths worldwide occur due to TB infection. This is because of tuberculosis reservoirs in the alveoli making it a challenge for the formulation scientist to target this.

AREAS COVERED

This review recent investigations on the forefront of pulmonary drug delivery for managing MDR-TB and XDR-TB. Novel delivery systems like liposomes, niosomes, employing carbohydrate, and -coated molecules via conjugation to selectively deliver the drugs to the lung TB reservoir via pulmonary administration are discussed.

EXPERT OPINION

Poor patient adherence to treatment due to side effects and extended therapeutic regimen leads to drug-resistant TB. Thus, it is essential to design novel strategies this issue by developing new chemical entities and/or new delivery systems for delivery to the lungs, consequently reducing the side effects, the frequency and the duration of treatment. Delivery of drugs to enhance the efficacy of new/existing anti-TB drugs to overcome the resistance and enhance patient compliance is underway.

Lipopolysaccharide Polyelectrolyte Complex for Oral Delivery of an Anti-tubercular Drug

Anti-tuberculosis drug delivery has remained a challenge due to inconsistent bioavailability and inadequate sustained-release properties leading to treatment failure. To resolve these drawbacks, a lipopolysaccharide polyelectrolyte complex (PEC) encapsulated with rifampicin (RIF) (as the model drug) was fabricated, using the solvent injection technique (SIT), with soy lecithin (SLCT), and low-molecular-weight chitosan (LWCT). The average particle size and surface charge of RIF-loaded PEC particulates was 151.6 nm and + 33.0 nm, respectively, with noted decreased particle size and surface charge following increase in SLCT-LWCT mass ratio. Encapsulation efficiency (%EE) and drug-loading capacity (%LC) was 64.25% and 5.84%, respectively. Increase in SLCT-LWCT mass ratio significantly increased %EE with a marginal reduction in %LC. In vitro release studies showed a sustained-release profile for the PEC particulate tablet over 24 h (11.4% cumulative release) where the dominant release mechanism involved non-Fickian anomalous transport shifting towards super case II release as SLCT ratios increased (6.4% cumulative release). PEC-tablets prepared without SIT presented with rapid Fickian-diffusion-based drug release with up to 90% RIF release within 4 h. Ex vivo permeability studies revealed that lipopolysaccharide PEComplexation significantly increased the permeability of RIF by ~ 2-fold within the 8-h study period. These results suggest successful encapsulation of RIF within a PEC structure while imparting increased amorphic regions, as indicated by x-ray diffraction, for potential benefits in improved drug dissolution, bioavailability, and dosing.

[Increase of antituberculosis efficiency of rifampicin embedded into phospholipid nanoparticles with sodium oleate]

The formulation of the antituberculosis drug rifampicin embedded into 20-30 nm nanoparticles from soy phosphatidylcholine and sodium oleate, is characterized by greater bioavailability as compared with free drug substance. In this study higher antituberculosis activity of this formulation was shown. Rifampicin in nanoparticles demonstrated more effective inhibition of M. tuberculosis H37Rv growth: minimal inhibiting concentration (MIC) was twice smaller than for free rifampicin. Administration of this preparation to mice with tuberculosis induced by M. tuberculosis Erdman revealed that after 6 weeks of oral administration the CUF value in lung was 22 times smaller for rifampicin in nanoparticles than for free drug (1.7 un. vs. 37.4 un.). The LD50 value in mice was two fold higher for rifampicin in nanoformulation.

Considerations in preparing for clinical studies of inhaled rifampicin to enhance tuberculosis treatment

Drug delivery via the inhaled route has advantages for treating local and systemic diseases. Pulmonary drug delivery may have potential in treating tuberculosis (TB), which is mainly localised in the lung (pulmonary tuberculosis ∼75%) while also affecting other organs (extra-pulmonary tuberculosis). Currently, rifampicin, a first-line anti-tubercular drug, is given orally and the maximum daily oral dose is the lesser of 10 mg/kg or 600 mg. Since only a small fraction of this dose is available in the lung, concentrations may frequently fail to reach bactericidal levels, and therefore, contribute to the development of multi-drug resistant pulmonary TB. Pulmonary delivery of rifampicin, either alone or in addition to the standard oral dose, has the potential to achieve a high concentration of rifampicin in the lung at a relatively low administered dose that is sufficient to kill bacteria and reduce the development of drug resistance. As yet, no clinical study in humans has reported the pharmacokinetics or the efficacy of pulmonary delivery of rifampicin for TB. This review discusses the opportunities and challenges of rifampicin delivery via the inhaled route and important considerations for future clinical studies on high dose inhaled rifampicin are illustrated.

Cure of tuberculosis using nanotechnology: An overview

Mycobacterium tuberculosis is the causative agent of tuberculosis (TB), a major health issue of the present era. The bacterium inhabits the host macrophage and other immune cells where it modulates the lysosome trafficking protein, hinders the formation of phagolysosome, and blocks the TNF receptor-dependent apoptosis of host macrophage/monocytes. Other limitations such as resistance to and low bioavailability and bio-distribution of conventional drugs aid to their high virulence and human mortality. This review highlights the use of nanotechnology-based approaches for drug formulation and delivery which could open new avenues to limit the pathogenicity of tuberculosis. Moreover phytochemicals, such as alkaloids, phenols, saponins, steroids, tannins, and terpenoids, extracted from terrestrial plants and mangroves seem promising against M. tuberculosis through different molecular mechanisms. Further understanding of the genomics and proteomics of this pathogenic microbe could also help overcome various research gaps in the path of developing a suitable therapy against tuberculosis.

Critical Parameters for Particle-Based Pulmonary Delivery of Chemotherapeutics

Targeted delivery of chemotherapeutics through the respiratory system is a potential approach to improve drug accumulation in the lung tumor, while decreasing their negative side effects. However, elimination by the pulmonary clearance mechanisms, including the mucociliary transport system, and ingestion by the alveolar macrophages, rapid absorption into the blood, enzymatic degradation, and low control over the deposition rate and location remain the main complications for achieving an effective pulmonary drug delivery. Therefore, particle-based delivery systems have emerged to minimize pulmonary clearance mechanisms, enhance drug therapeutic efficacy, and control the release behavior. A successful implementation of a particle-based delivery system requires understanding the influential parameters in terms of drug carrier, inhalation technology, and health status of the patient's respiratory system. This review aims at investigating the parameters that significantly drive the clinical outcomes of various particle-based pulmonary delivery systems. This should aid clinicians in appropriate selection of a delivery system according to their clinical setting. It will also guide researchers in addressing the remaining challenges that need to be overcome to enhance the efficiency of current pulmonary delivery systems for aerosols.

Preparation and characterization of isoniazid-loaded crude soybean lecithin liposomes

Tuberculosis (TB) is a poverty related infectious disease that is rapidly giving rise to public health concerns. Lengthy drug administration and frequent adverse side-effects associated with TB treatment make anti-tubercular drugs (ATDs) good candidates for drug delivery studies. This work aimed to formulate and prepare liposomes as a cost-effective option for ATD delivery. Liposomes were prepared by film hydration using crude soybean lecithin (CL) and not pure phospholipids as in the normal practice. Cholesterol was also used (up to 25% mass ratio), and isoniazid (INH) was encapsulated as model drug using a freeze-thaw loading technique. Purified soybean lecithin (PL) was also used for comparative purposes, under the same conditions. INH-loaded liposomes were characterized for particle size, Zeta Potential (ZP), encapsulation efficiency (EE) and drug release. Physicochemical properties were investigated using thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction and Fourier transform infrared. INH-loaded CL-based liposomes showed high EE (79±2.45%). The average particle size (813.00±9.21nm) and ZP (-42.80±4.31mV) of this formulation are promising for the treatment of TB by pulmonary delivery. These findings suggest the possibility of encapsulating ATDs in liposomes made of crude soybean lecithin that is cheap and readily available.

Rifampicin loaded chitosan nanoparticle dry powder presents an improved therapeutic approach for alveolar tuberculosis

Current treatment therapeutic approach for tuberculosis is the administration of first line drugs in the form of tablets and capsules for 4-6 months. However, this approach leads to severe adverse effects. Therefore, present study was designed to achieving local and sustained targeting of anti-tubercular drugs in order to reduce dose and frequency. The nanoparticle based dry powder formulation of rifampicin was developed and analyzed with respect to its direct targeting potential of lungs. Rifampicin loaded nanoparticles were formulated by ionic gelation probe sonication method, and characterized with respect to particle size, zeta potential, entrapment and drug loading efficiency. The range of size and entrapment efficiency of prepared nanoparticles was estimated from 124.1±0.2 to 402.3±2.8nm and 72.00±0.1%, respectively. The freeze-dried powder of nanoparticle formulation was used to carry out in vitro lung deposition studies through Andersen cascade impactor. The cumulative in vitro drug release studies with developed nanoparticle formulation showed sustained release up to 24h. Our in vitro sustained drug release results were corroborated by the extended residence and slow clearance of rifampicin from the lungs. Furthermore, our results suggest the minimum lung distribution of drug in treated rats which confirms the negligible toxicity rendered by nanoparticle dry powder formulation. Moreover, pharmacokinetic and toxicity studies carried out with prepared NPs dry powder inhalation (DPI) formulations and compared with conventional DPI.

The formulation of nanomedicines for treating tuberculosis

Recent estimates indicate that tuberculosis (TB) is the leading cause of death worldwide, alongside the human immunodeficiency virus (HIV) infection. The current treatment is effective, but is associated with severe adverse-effects and noncompliance to prescribed regimens. An alternative route of drug delivery may improve the performance of existing drugs, which may have a key importance in TB control and eradication. Recent advances and emerging technologies in nanoscale systems, particularly nanoparticles (NPs), have the potential to transform such approach to human health and disease. Until now, several nanodelivery systems for the pulmonary administration of anti-TB drugs have been intensively studied and their utility as an alternative to the classical TB treatment has been suggested. In this context, this review provides a comprehensive analysis of recent progress in nanodelivery systems for pulmonary administration of anti-TB drugs. Additionally, more convenient and cost-effective alternatives for the lung delivery, different types of NPs for oral and topical are also being considered, and summarized in this review. Lastly, the future of this growing field and its potential impact will be discussed.

Dry powder inhalable formulations for anti-tubercular therapy

Tuberculosis (TB) is an intracellular infectious disease caused by the airborne bacterium, Mycobacterium tuberculosis. Despite considerable research efforts, the treatment of TB continues to be a great challenge in part due to the requirement of prolonged therapy with multiple high-dose drugs and associated side effects. The delivery of pharmacological agents directly to the respiratory system, following the natural route of infection, represents a logical therapeutic approach for treatment or vaccination against TB. Pulmonary delivery is non-invasive, avoids first-pass metabolism in the liver and enables targeting of therapeutic agents to the infection site. Inhaled delivery also potentially reduces the dose requirement and the accompanying side effects. Dry powder is a stable formulation of drug that can be stored without refrigeration compared to liquids and suspensions. The dry powder inhalers are easy to use and suitable for high-dose formulations. This review focuses on the current innovations of inhalable dry powder formulations of drug and vaccine delivery for TB, including the powder production method, preclinical and clinical evaluations of inhaled dry powder over the last decade. Finally, the risks associated with pulmonary therapy are addressed. A novel dry powder formulation with high percentages of respirable particles coupled with a cost effective inhaler device is an appealing platform for TB drug delivery.

Protective effect of magnolol-loaded polyketal microparticles on lipopolysaccharide-induced acute lung injury in rats

Magnolol has shown inhibitory effects on NO production and TNF-alpha production in lipopolysaccharide (LPS)-activated macrophages and LPS-induced acute lung injury; however, the poor solubility of magnolol has hindered its clinical success. In this study, magnolol-loaded microparticles were prepared via single emulsion method from a polyketal polymer, termed PK3. The particle sizes of magnolol-loaded PK3 microparticle is 3.73 ± 0.41 μm, and was suitable for phagocytosis by macrophages and pulmonary drug delivery. PK3 microparticles exhibited excellent biocompatibility both in vitro and in vivo. More importantly, intratracheal delivery of these magnolol-loaded microparticles significantly reduced the lung inflammatory responses at low dosage of magnolol (0.5 mg/kg), and have great clinical potential in treating acute lung injury.