Biomechanical analysis of titanium fixation plates and screws in sagittal split ramus osteotomies

Biomechanical Effects of Different Miniplate Thicknesses and Fixation Methods Applied in BSSO Surgery Under Two Occlusal Conditions

Purpose

Finite element analysis (FEA) was used to evaluate the effects of different thicknesses, numbers, and positions of the miniplate applied in bilateral sagittal split osteotomy (BSSO) under two occlusal conditions.

Methods

An FEA model of the mandibles was constructed and combined with different thicknesses (0.6 or 1 mm), number (one or two), positions (upper or lower) of a miniplate and was divided into six models. In addition, external forces were applied to the muscles to simulate the intercuspal position (ICP) and right unilateral molar clench. This study used the reaction force of the temporomandibular joints and the stress of the mandible as observation indexes.

Results

The results of this study show that, under ICP, the 0.6 mm lower model generated greater TMJ force reaction compared to the 0.6 mm upper model. The same trend was seen in the 1 mm lower model compared to the 1 mm upper model. Regarding the stress of the bone on the screw-implanted sites, under ICP, screw 10 showed greater stress than screw 2, and screw 11 showed greater stress than screw 3. The stress values of the miniplates showed, under ICP, point 1-c was greater than point 3-c, and point 1-b was greater than point 3-b.

Conclusion

In the case of BSSO mandibular advancement surgery, implanting the miniplate at the upper position can reduce the force on the TMJ and the stress on the distal segment of the mandible. The miniplate can also resist the tensile stress more effectively. In addition, implanting two miniplates with thinner sizes may be an alternative in clinical practice.

In vivo biomechanical effects of maximal mouth opening on the temporomandibular joints and their relationship to morphology and kinematics

The temporomandibular joints (TMJs) are the only joints in the human skull and regulate all mandibular motions. The functions of TMJs are considerably influenced by their biomechanical surroundings. However, owing to the unique characteristics of TMJs, comprehending their kinematic and biomechanical mechanisms remains challenging. As a result, understanding how biomechanics relate to TMJ structures and motions is critical in subsequent therapies. The goal of this study is to investigate any links between morphological or kinematic factors and discal stresses during mouth opening. Our study included eight asymptomatic participants who did not show any signs or symptoms of temporomandibular disorders. The morphological parameters, kinematic properties, and stresses were determined using computed tomography (CT), magnetic resonance imaging (MRI), and subject-specific movements. Following the investigation, we discovered that the opening of the mouth was not the primary cause of TMJ stress. The stress on the discs is directly linked to condylar displacements during mouth opening. Furthermore, morphological characteristics related to the relative position of the condyles in the glenoid fossa at the intercuspal position have a limited effect on condylar displacements and stresses. In conclusion, the morphological parameters, which are commonly employed in clinics, show only static conditions in the TMJs. The kinematic parameters provide dynamic information regarding the TMJs, which can be used in the examination, diagnosis, and treatment of TMJ diseases to reduce stress.

Biomechanical Evaluation of Seven Fixation Methods for Sagittal Split Ramus Osteotomy with Four Advancement Levels by Finite Element Analysis

Background

Mandibular sagittal split ramus osteotomy (SSRO) is a routine surgery to correct mandibular deformities, such as mandibular retrusion, protrusion, deficiency, and asymmetry. However, nonunion/malunion of the fragments and relapse caused by fixation failure after SSRO are major concerns. Rigid fixation to maintain postosteotomy segmental stabilization is critical for success. Additionally, understanding the biomechanical characteristics of different fixation methods in SSRO with large advancements is extremely important for clinical guidance. Therefore, the aim of the present study was to evaluate the biomechanical characteristics of different SSRO methods by finite element analysis.

Methods

SSRO finite element models with 5-, 10-, 15-, and 20-mm advancements were developed. Seven fixation methods, namely, two types of bicortical screws, single miniplate, dual miniplates, grid plate, dual L-shaped plates, and hybrid fixation, were positioned into the SSRO models. Molar and incisal biomechanical loads were applied to all models to simulate bite forces. We then investigated the immediate postoperative stability from four aspects, namely, the stability of the distal osteotomy segment, osteotomy regional stability, stress distribution on the mandible, and implant stress performance.

Results

The stability of the distal osteotomy segment and osteotomy region decreased when the advancement increased. All seven fixation methods displayed favorable biomechanical stability under minor advancement (5 mm). With large advancements, bicortical screws, dual miniplates, and grid plates provided better stability. The von Mises stress was concentrated around the screws close to the osteotomy region for the proximal segment for all fixation methods, and the von Mises stress on implants increased with larger advancements. With small advancements, five fixation methods endured tolerable maximum stresses of <880 MPa. A single miniplate and dual L-shaped plates generally suffered high stresses using larger advancements. The biomechanical characteristics were similar under molar and incisal loads.

Conclusions

The current study investigated the biomechanical properties of seven fixation devices after SSRO under molar and incisal loads. Generally, bicortical screws, grid plates, and dual miniplates provided better biomechanical stability using finite element analysis.

Biomechanical analysis of temporomandibular joints during mandibular protrusion and retraction motions: A 3d finite element simulation

BACKGROUND AND OBJECTIVE

Temporomandibular disorders (TMDs) represent a wide range of musculoskeletal disorders associated with the maxillofacial system, which negatively affect the daily activities of patients. TMD symptoms are caused by the temporomandibular joint (TMJ) overloading. TMJ motions are frequent and can trigger overloading and imbalanced loads on the TMJs, which are assumed to be dangerous. The condyles move forward a lot during mandibular protrusion, which is possibly harmful to the biomechanical environment of the TMJs. The aim of this study was to investigate the biomechanical behavior of TMJs during mandibular protrusion and retraction.

METHODS

Six three-dimensional maxillofacial system models from asymptomatic subjects were established through computed tomography (CT) and magnetic resonance imaging (MRI). The mandibular protrusion and retraction were recorded using an optical tracking system. Finite element analysis was used to simulate the biomechanical behaviors of the TMJs during the movements.

RESULTS

The simulation results were validated to be effective by comparison with the MRIs. The results indicated that the stresses during the protrusion and retraction were approximately equal at the same condylar displacement. Meanwhile the discal stresses, relatively correlated with the condylar displacement, increased as the condylar displacement increased during the protrusion and decreased as the condylar displacement decreased in the retraction. In addition, the average peak maximum and minimum principal stresses of the discs were 0.186 and -0.192 MPa, respectively.

CONCLUSIONS

The models were reasonable for the investigation of the TMJs motion. Based on the results, three quadratic polynomials were proposed to describe the relationship between the stresses and the condylar displacements. In clinical diagnosis, the functions are helpful in the prediction of the discal stresses by measuring the condylar displacement.

Biomechanical behaviour of temporomandibular joints during opening and closing of the mouth: A 3D finite element analysis

Temporomandibular joints (TMJs) constitute a pair of joints that connect the jawbone to the skull. TMJs are bilateral joints which work as one unit in conducting daily functions such as speaking, mastication, and other activities associated with the movement of the jaw. Issues associated with the TMJs may arise due to various factors-one such factor being the internal load on the TMJ. These issues may contribute to temporomandibular disorders (TMD). This study aims to evaluate the mandibular trajectories and the associated stress changes during the process of opening the mouth on the TMJs of an asymptomatic subject. The mouth opening motion was recorded by a motion capturing system using models of the mandible and maxilla constructed based on the computed tomography (CT). Two discs constructed based on magnetic resonance imaging (MRI). Finite element analysis was performed on the relative motion of the mandible to the maxilla and validated. The process modelled by these displacements provided less than 10% error in terms of deformation. The simulation results indicate that the lateral intermediate zone-the head and neck of the mandible-and the articular eminence sustained the most significant stresses during the mouth opening motion. The results also suggested that the stresses increase as the range of opening increases with the greatest von Mises stress, tensile, and compressive stress found at the position of maximal opening.