Success or failure of endodontic treatments: A retrospective study

Root canal dentin wear during final irrigation in endodontic retreatment with passive ultrasonic irrigation and easy clean instruments

Context

Complementary procedures have been proposed to improve the endodontic retreatments.

Aim

The aim of this study was to evaluate, by microcomputed tomography (micro-CT), the dentin wear caused by passive ultrasonic irrigation (PUI) and easy clean (EC) instruments, when used for the final removal of filling material during endodontic retreatment.

Methods

Thirty-six mesial roots of the lower first molars were divided into four groups (n = 9), according to the final irrigation and sealer: PUI/AH Plus, EC/AH Plus, PUI/Total Fill (TF), and EC/TF. Canal volume was evaluated, both before and after the final irrigation, by micro-CT analysis. The Kruskal-Wallis test was used to compare the volumes among groups and the paired Wilcoxon test was used to compare the volume values before and after the final irrigation within each group.

Results

Both complementary cleaning procedures promoted dentin wear that was observed only when the volume was analyzed for each third of the root canal. In the apical third, both instruments showed significant wear, where the use of the EC instrument resulted in greater wear than the PUI, in teeth filled with both AH Plus and TF BC Sealers (P < 0.05).

Conclusion

Both complementary cleaning procedures promoted dentin wear and must be used cautiously.

Effect of Endo-Z bur or Bladesonic ultrasonic tip on the adaptation of filling material. A micro-CT study

This study aimed to evaluate the effect of apicoectomy performed with a bur or an ultrasonic tip on the adaptation of the filling material to root canal dentin. Twenty human mandibular incisors were selected and prepared with a ProDesign Logic system up to diameter 40/.05. The root canals were filled with Bio-C Sealer (Angelus, PR, Brazil) using the single cone technique and were stored at 37ºC and 95% relative humidity for 7 days. After this period, the apicoectomy of the 3 millimeters of the root apex was performed using Endo-Z bur (Dentsply Sirona) or Bladesonic ultrasonic tip (Helse Ultrasonic, Santa Rosa de Viterbo, Brazil) (n=10). The specimens were scanned by micro-computed tomography (micro-CT; SkyScan 1176) with a voxel size of 8.74 µm after obturation and after apicoectomy. The percentage of voids at the interface between the filling material and the root canal wall was evaluated in the apical 4 mm of the root after apicoectomy, besides the time cutting to both devices. The data obtained were submitted to paired and unpaired t-tests (α = 0.05). Endo-Z and Bladesonic increased the percentage of voids between the filling material and the dentin after apicectomy (p<0.05), and they were similar (p>0.05). Endo-Z has a shorter time to perform apicoectomy compared to Bladesonic (p<0.05). Apicectomies with Endo-Z or Bladesonic could harm the material/dentin interface, while the Endo-Z bur was faster than the Bladesonic ultrasonic tip.

Endodontic retreatment practice trends among dental surgeons: A survey-based research

Aim

Root canal treatment procedures are considered "the bread and butter" for routine clinical practice. Although retreatments have been primarily performed by endodontists (ENs), many senior practitioners and dentists who are root canal enthusiasts do opt for undertaking endodontic retreatment procedures. This survey helps us understand the practice trends and attitude of dentists undertaking endodontic retreatment procedures in and around Mumbai city.

Materials and Methods

Questionnaires pertaining to endodontic retreatment were randomly distributed (hard copy/soft copy) to 1000 practicing dentists in and around Mumbai city. The questionnaire survey was divided into Part A: involving basic details such as name, demographic information, and clinical experience of the dentist and Part B: a set of questions based on assessing the trends, techniques, materials, and opinions of dentists regarding endodontic retreatment. Only those dentists who treated endodontic retreatment patients were asked to fill the Part B form. A response rate of 60.2% was achieved.

Results

Out of total 602 participants, 49% of dentists (295) reported to undertake endodontic retreatment cases. Among the 295 respondents, 46.11% were Endodontists (ENs) while 53.8% were BDS or MDS of other specialties (ODs). Most dentists preferred multi-visit retreatment and prescribed antibiotics only in specific cases. Radiovisiography was the most preferred imaging aid. Calcium hydroxide and 3% sodium hypochlorite were favored choices for intracanal medicament and irrigant, respectively. Cold lateral compaction obturation technique was most common. Advanced equipment such as microscopes, loupes, ultrasonics, retreatment files, and thermoplastic obturations were more prevalent among ENs as compared to ODs.

Conclusion

This study found some differences in endodontic retreatment practice trends among ENs and other dentists. But overall, most clinicians followed the international norms and are updated in recent advances in materials and techniques used in endodontic retreatment.

Evaluation the antibacterial efficacy of sodium hypochlorite in combination with two different photodynamic therapy protocols against Enterococcus Faecalis in Infected root canals: An in-vitro experiment

BACKGROUND

Photodynamic therapy (PDT) is an antimicrobial approach that can be used as an adjunctive safe technique for root canal disinfection. In this study, we aimed to evaluate the antibacterial efficacy of PDT with indocyanine green and toluidine blue in combination with sodium hypochlorite (NaOCl) in compared with NaOCl alone against Enterococcus faecalis in infected root canals.

METHODS

Sixty five root canals of sound human premolars were collected. First, the teeth were sterilized, then 60 root canals were inoculated with the E. faecalis, and 5 samples served as negative control remained uncontaminated. The contaminated root canals were randomly assigned into 4 experimental groups (n=15): (1) NaOCl, (2) NaOCl+ PDT-1 (toluidine blue + 630nm LED), (3) NaOCl+ PDT-2 (indocyanine green + 808nm diode laser), and (4): positive control (no treatment). Then, the colony-forming units (CFU/mL) of E. faecalis were calculated in all the groups. Moreover, 5 samples from each group were examined under a scanning electron microscope. The data were analyzed by independent T-test and the Mann-Whitney U test at the significance level of 0.05.

RESULTS

The CFU count was significantly lower in the indocyanine green-PDT group in comparison with other groups (p˂0.05). The mean of CFU in the positive control group was significantly higher than the other groups (p˂0.05). No significant difference was detected between NaOCl and toluidine blue -PDT group (p=1.00).

CONCLUSION

Indocyanine green- PDT improved the antibacterial effects of NaOCl against E. faecalis, while toluidine blue - mediated PDT had no significant additional effect on NaOCl.

Prevalence of mesiobuccal-2 canals in maxillary first and second molars among the Bruneian population—CBCT analysis

Introduction

Identification of the second mesiobuccal canal (MB-2) in maxillary molars is considered an endodontic concern of many practitioners due to its complex morphology. The use of Cone-beam Computed Tomography (CBCT) is a necessity for easier location of this elusive canal during endodontic treatment.

Aim

To study the prevalence of the MB-2 canal in the maxillary first and second molars amongst the Bruneian population.

Materials and methods

A retrospective study involving a review of scans taken from a CBCT scanner (J Morita; Veraviewepocs 3D R100 Panoramic/Cephalometric) over a 5-year period, from May 2016 to May 2021 was carried out. A total of 342 maxillary molars were evaluated independently by two observers. Any contradicting outcomes were discussed by both observers until a consensus was reached. In addition, the correlation of MB-2 canals with gender and age were calculated using the chi-squared test.

Results

The prevalence of MB-2 canal in the maxillary first and second molars are 51.3% and 29.8% respectively. Both males and females have a similar prevalence of MB-2 canals in the maxillary first and second molars. The incidence of MB-2 canals in both maxillary first and second molars significantly decreases with increasing age. No significant correlation between the prevalence of MB-2 canals with different gender groups in the population.

Conclusions

It is crucial for clinicians to identify the presence of MB-2 canals when performing endodontic treatment of the maxillary first and second molars. Varying prevalence has been reported for different populations. Recognising this wide-ranging prevalence amongst different populations will allow for greater predictability in ensuring endodontic treatment success.

The Application of Nano Silver Argitos as a Final Root Canal Irrigation for the Treatment of Pulpitis and Apical Periodontitis. In Vitro Study

BACKGROUND

Endodontic treatment of various forms of pulpitis with variations of root canal system anatomy should be performed with high quality. The use of various antibacterial agents is aimed at maintaining the success of endodontic treatment. The aim of this study was to evaluate the penetration and fixation of the nano-silver solution on the dentinal surface during endodontic treatment.

MATERIALS AND METHODS

the study was carried out on 70 extracted single-rooted teeth, randomly divided into two groups. In the teeth of the first group, the smear layer was removed after canal preparation with 17% EDTA solution; in the second group, the smear layer was not removed. In both groups, for the final treatment of the canal, a colloidal 1% solution of нанo серебра nanosilver was used. Samples were cut and prepared for analysis using micro-CT, scanning electron microscopy (SEM), X-ray microanalysis and energy dispersive spectrometry (elemental mapping).

RESULTS

in 100% of cases in groups of teeth with a preserved smear layer, the ability of a 1% colloidal solution of nanosilver with particles of 1-2 nm to be fixed on dentin with a removed and preserved smear layer and to leave a film on the dentinal surface was established. In the samples with removed smear layer, silver was found in 73.5% of cases.

CONCLUSION

The nano-silver solution with a particle size of 1-2 nm proved its ability to penetrate the dentinal surfaces and create a final film covering the dentinal surface of the root canal before applying the sealer.

Effectiveness of photodynamic therapy on bonding strength and failure modes of fiber-posts in c-shaped treated root canals

AIM

The present study aimed to assess the push-out bond strength (PBS) and failure modes of fiber-posts after photodynamic therapy (PDT) and Erbium yttrium scandium gallium garnet (Er,Cr:YSGG) in c-shaped canals.

METHODS

Sixty molars with c-shaped root configuration were studied. The endodontic prepared teeth specimen were equally randomized into four groups: i) photodynamic therapy (PDT); ii) Er,Cr:YSGG; iii) chlorhexidine and; iv) control group. Post root filling, 10 mm space was prepared for insertion of post in the root canals. The push-out bond strength was evaluated using Universal testing machine. Modes of failure were evaluated as adhesive, cohesive and admixed. Mean values were computed between groups using Kruskal-Wallis test followed by Bonferroni post hoc test. Comparison between two thirds of root sections were analyzed using Friedman test. P-value was set at 0.05 or less.

RESULTS

Specimens treated with PDT reported the highest mean PBS (8.56 ± 2.12 MPa), while the lowest PBS was observed in NaOCl group (6.92 ± 2.21 MPa). Thirteen failures were observed at the adhesive post interface, whereas 22 failures were found at the interface forming between the dentin surface and adhesive. Similarly, 9 failures were categorized as mixed. For PDT group, a sum of 3 failures and 4 failures were noted at the apical and cervical points.

CONCLUSION

The specimens treated with PDT showed the highest push out bond strength with least number of failures.in c-shaped root canals.

Etiological factors commonly related to the need of endodontic treatment in individuals with orofacial clefts

Background

Dental treatment is fundamental in the rehabilitation of individuals with orofacial clefts, due to their oral condition; when indicated, endodontic therapy allows elimination of infection of the root canal system. Aim: To analyze, by a retrospective study, the most prevalent type of orofacial cleft, the etiological factors most commonly related to the endodontic treatment need, as well as their success and failure rates.

Material and Methods

This study analyzed data from 136 records (76 females and 60 males) with mean age of 19 years and 7 months, who met the inclusion criteria. Data were collected including the type of cleft, etiological factors that led to the need of endodontic treatment, as well as their success and failure rates. The statistical analysis was performed by the chi-square, Kruskal-Wallis, Fisher's Exact and Batista Pike tests.

Results

Among the etiological factors, were pulp involvement due to caries, endodontic treatment for prosthetic rehabilitation, tooth resorptions, for orthodontic movement, dental trauma and indication of internal tooth bleaching; the most prevalent factor was pulp involvement due to caries. Among all data analyzed, cleft lip and palate presented the highest percentage, and there was predominance of treatment success compared to failure.

Conclusions

The well-conducted root canal treatment is necessary for dental rehabilitation, maintaining the masticatory function and esthetic harmony of these individuals. Key words:Cleft lip, Cleft palate, Endodontics.

Endodontic management of a tooth with apical overfilling and perforating external root resorption: A case report

Successful non-surgical orthograde retreatment of a tooth with external root resorption in apical third of root and overfilling material beyond the apical barrier which was diagnosed with the help of cone beam computed tomography (CBCT), was reported. Biodentine was used as the treatment of choice for obturation of resorption area.

Influence of resin cements and root canal disinfection techniques on the adhesive bond strength of fibre reinforced composite post to radicular dentin

AIM

To determine the push out bond strength (PBS) of fibre reinforced composite post (FRCP) bonded to radicular dentin using different cement types total etch resin cement (TERC) and Self-adhesive resin cement (SARC) conditioned with (PDT, 5.25 % NaOCl with EDTA and 1% NaOCl) MATERIALS AND METHODS: Sixty freshly extracted (orthodontic purpose) human single rooted mandibular premolars were collected. Teeth were disinfected and coronal part of all samples were removed. Cleaning shaping and finishing of canal space was performed and filled with gutta percha via lateral condensation. Post space was prepared and disinfected with three irrigating solutions. Samples in group 1 and 2 disinfected 5.25 % NaOCl with EDTA, group 3 and 4 steriled with 1% NaOCl and group 5 and 6 disinfected with Methylene Blue photodynamic therapy (PDT). Based on the resin cement, FRCP was luted with TERC in group 2, 4 and 5; and with SARC in group 1,3 and 6 respectively. All specimens were subjected to aging and push-out bond strength (PBS) on universal testing machine after sectioning of each sample in three segments (coronal, middle and apical). Following push out bond strength (PBS), debonded surface were observed under stereomicroscope at 40x magnification. PBS were equated by means of analysis of variance (ANOVA) and Tukey's post hoc test maintaining level of significance (p < 0.05) RESULTS: Group 1 (SARC) and 2 (TERC) disinfected with 5.25 % NaOCl with 17 % EDTA, TERC (group 2) showed higher extrusion bond strength at all three levels coronal (9.25 ± 0.21 MPa) middle (8.81 ± 0.94 MPa) and apical (8.21 ± 0.93 MPa). Whereas, canal space sterilized with 1% NaOCl [group 3 (SARC) and group 4 (TERC)], posts cemented with TERC exhibited the higher PBS at all three levels of root canal (10.22 ± 0.36 MPa), (9.68 ± 0.51 MPa), (6.33 ± 0.08 MPa). Similarly, among PDT disinfected fiber post [group 5 (TERC) and group 6 (SARC)], TERC exhibited the greater PBS values at coronal, middle and apical levels (6.25 ± 0.39 MPa) (5.17 ± 0.22 MPa) (4.32 ± 0.69 MPa) compared to SARC specimens CONCLUSION: Irrespective of canal irrigant, fiber post bonded with TERC showed higher PBS at coronal and middle third. Fiber post bonded with SARC when irrigated with 5.25 % NaOCl with EDTA, 1% NaOCl displayed higher PBS at apical third. Canal disinfected using PDT showed lower PBS for FRCP compared to 5.25 % NaOCl with EDTA and 1% NaOCl.

In vitro comparative evaluation of efficiency of XP-endo shaper, XP-endo finisher, and XP-endo finisher-R files in terms of residual root filling material, preservation of root dentin, and time during retreatment procedures in oval canals - A cone-beam computed tomography analysis

Background:

In an oval-shaped canal, no single instrumentation systems were effective in absolute removing obturation.

Aim:

The aim of the study was to evaluate the performance of ProTaper Universal Retreatment (PTUR) system, XP-endo Shaper (XPS), XP-endo Finisher (XPF), and XP-endo Finisher-R (XPF-R) in removing root-canal filling material and preservation of sound dentin during retreatment procedure.

Methodology:

Root-canal preparation was performed on 60 mandibular premolars with oval-shaped canals using the ProTaper Gold file system. Preobturation scans were performed to measure canal volume of the canal and recorded. Obturation was performed and the samples were randomly assigned into four groups according to the retreatment protocol used (n = 15): H-file, PTUR files, PTUR followed by XPF file, and XPS supplemented with XPF-R file. After retreatment, the specimens were re-scanned and volumetric analysis of remaining root filling material, volume of the canal space were measured using EZ-3Di Software Version 5.0.0.2. All the data were subjected to one-way ANOVA and post hoc Tukey's test with a significance of 5%.

Results:

XPS + XPF-R showed promising results in the removal of obturating material and preservation of root dentin than any other group. The difference is statistically significant.

Conclusion:

XPS + XPF-R removed gutta-percha more significantly without sacrificing the sound dentin along with instrumentation.

Photodynamic activation of irrigation (using different laser prototypes) on push out bond strength of fiber posts

BACKGROUND

To evaluate the influence of photodynamic therapy (PDT) and light activated irrigation (LAI) using different laser prototypes Er,Cr:YSGG (ECYL), Er:Yag (EYL), Nd-Yag (NYL) on pushout bond strength of Pre-fabricated fiber reinforced composite (PFRC) post to radicular dentin.

MATERIAL AND METHOD

Fifty maxillary and mandibular teeth were collected, cleaned and decoronated. Canals were instrumented using crown-down technique. Flaring of canals was performed using protaper S1, SX files. F1, F2 and F3 files were utilized for finishing of canal preparations. Prepared root canals were dried and obturated with gutta percha. Teeth were placed vertically within the section of polyvinyl pipes using acrylic resin. Post space preparation was completed using peso-reamers. Based on the PDT and laser activated irrigation (LAI) with different laser prototypes, samples were divided into five groups of 10 specimens each. Group 1- PDT, group 2-5.25 % NaOCl (sodium hypochlorite) and 17 % EDTA (ethylene diamine tetra acetic acid), group 3-5.25 % NaOCl with 17 % EDTA and NYL, group 4-5.25 % NaOCl with 17 % EDTA and EYL ; and group 5-5.25 % NaOCl +17 % EDTA and ECYL. Fiber post were luted in root canals with self-etch dual cure cement and teeth were sectioned at three levels (apical, middle and coronal). Push-out test was performed by placing the specimens in universal testing machine. Failure analysis of debonded surfaces was evaluated using stereomicroscope at 40× magnification. Means and standard deviations of push out bond strength were assessed by one-way analysis of variance (ANOVA). Comparison between means of push out bond strength was evaluated using Tukey multiple comparison tests (p = 0.05).

RESULT

The highest push out bond strength was observed in group 5 at all three levels, coronal (10.08 ± 0.74 MPa), middle (8.95 ± 0.94 MPa) and apical (6.00 ± 0.88 MPa). The lowest push out bond strength was demonstrated by group 2 at all levels, coronal (6.15 ± 1.22 MPa), middle (5.65 ± 0.95 MPa) and apical (2.25 ± 0.55 MPa). Intra-group comparison showed decrease in push out bond strength in the coronal to apical direction among all investigated groups. Inter-group comparison exhibited comparable push out bond strength at all three levels of root for group 1 and group 2 specimens (p > 0.05).

CONCLUSION

LAI with different laser prototypes improved push out bond values of PFRC post to root dentin as an adjunct to NaOCl and EDTA treatment. PDT improved push out strength compared to conventional canal cleaning regime.

Effect of Photodynamic Therapy, Er,Cr:YSGG, and Nd:YAG Laser on the Push-Out Bond Strength of Fiber Post to Root Dentin

Objective: To evaluate the push-out bond strength and modes of failure of fiber post to root dentin by using photodynamic therapy (PDT), Er,Cr:YSGG, Nd:YAG laser, and conventional cleaning and shaping (CCS). Materials and methods: Eighty anterior teeth were sectioned in a horizontal manner being 2 mm incisal to the cementoenamel junction, and root canal was prepared for post space. After post space was made, fiber posts were placed inside the root canal system. The fiber posts were subjected to PDT, Er,Cr:YSGG laser, Nd:YAG laser, and conventional cleaning and shaping (CSS) with 20 specimens in each group. Cervical and apical sections were obtained from the specimens. For performing the push-out test, the universal testing machine was used. The formula used for calculating the push-out bond strength was σ = N/mm². Results: PDT group (8.16 ± 2.19 MPa) achieved the highest mean push-out bond strength, whereas Er,Cr:YSGG (7.24 ± 1.27 MPa) reported the lowest value in the specimens. Among the experimental groups, the ANOVA test expressed statistical difference (p = 0.481). In the cervical segments, the mean push-out bond strength was found to be higher in all of the experimental groups. For the cervical segments, the independent t-test results showed higher mean push-out bond strength values than the apical segments in PDT, Er,Cr:YSGG, Nd:YAG, and CSS groups, respectively (p < 0.05). Twenty failures were observed at the interface level between the adhesive and surface of dentin. Seven failures were found at the interface between mixed and the adhesive and post, respectively. Conclusions: Push-out bond strength to root canal dentin was not affected by PDT, Er,Cr:YSGG, and Nd:YAG laser compared with CCS. However, PDT produced the smallest number of failure modes and slightly higher push-out bond strength to root dentin. Laser treatment using PDT and Er,Cr:YSGG appeared to be clinically efficient showing acceptable push-out bond strength of fiber post with less number of failures at different regions of the root dentin.