Castor Oil: Properties, Uses, and Optimization of Processing Parameters in Commercial Production

Fate, transport, and plant uptake of ricinine in soils amended with castor cake organic fertilizer

The toxic alkaloid ricinine in castor cake organic fertilizers poses significant risks to groundwater and crop safety due to its potential for downward transport and plant uptake following land application. However, its environmental behavior remains insufficiently studied. To address this gap, a modified QuEChERS-based method coupled with LC-QTOF/MS was developed and validated, achieving recovery rates of 74.0-93.3 % and detection limits of 0.01-0.32 µg kg-1 for ricinine in castor cake, soils, and lettuce. Soil pot experiments investigated the fate, transport, and plant uptake of ricinine using two loam soils amended with castor cake fertilizers. Pot leaching experiments demonstrated ricinine's high mobility, with ricinine either leaching directly into water or converting to metabolites like N-demethyl-ricinine before transport. Ricinine concentrations in leachate, soil pore water, and soil solid phases decreased over time, with 5.1-40.6 % of the initial ricinine remaining after 14 days. Pot-cultivation experiments confirmed lettuce uptake of ricinine and its metabolite, with accumulation increasing at higher castor cake application rates, reaching up to 7.6 µg and 10.0 µg, respectively, and higher concentrations in shoots than roots. These results highlight ricinine's potential to contaminate agroecosystems, stressing the need for regulatory measures and effective management strategies to ensure food safety.

Vegetable Oils for Material Applications - Available Biobased Compounds Seeking Their Utilities

Materials derived from natural sources are demanded for future applications due to the combination of factors such as sustainability increase and legislature requirements. The availability and efficient analysis of vegetable oils (triacylglycerides) open an enormous potential for incorporating these compounds into various products to ensure the ecological footprint decreases and to provide advantageous properties to the eventual products, such as flexibility, toughness, or exceptional hydrophobic character. The double bonds located in many vegetable oils are centers for chemical functionalization, such as epoxidization, hydroxylation, or many nucleophile substitutions using acids or anhydrides. Naturally occurring castor oil comprises a reactive vacant hydroxyl group, which can be modified via numerous chemical approaches. This comprehensive Review provides an overall insight toward multiple materials utilities for functionalized glycerides such as additive manufacturing (3D printing), polyurethane materials (including their chemical recycling), coatings, and adhesives. This work provides a complex list of investigated and studied applications throughout the available literature and describes the chemical principles for each selected application.

Lipid-based nanoformulations in onychomycosis therapy: addressing challenges of current therapies and advancing treatment

Onychomycosis significantly impacts approximately 20% of the global population. The physical barriers of the nail structure make fungal infections a persistent therapeutic challenge. Traditional approaches, including topical and oral antifungal agents, have limitations such as toxicities, low nail permeability, adverse effects, and high recurrence rates. Consequently, emerging lipid-based delivery systems have gained interest because of their potential to address these drawbacks. Nanostructured lipid carriers (NLCs), solid lipid nanoparticles (SLNs), liposomes, and transferosomes are innovative formulations that offer enhanced drug solubility, sustained release, and targeted delivery to the nail matrix. These lipid-mediated approaches have shown promise in overcoming the hurdles associated with conventional therapies, thereby improving treatment outcomes, patient compliance, and the overall quality of life. A comprehensive review focusing on the potential of lipid-based drug delivery systems in treating onychomycosis is lacking in the existing literature. This review explores various aspects of the clinical presentation of onychomycosis, available treatments, challenges associated with treatment, formulation science related to lipid-based vehicles and their applications, highlighted by the promising aspects of these novel formulations, and provides insights into clinical developments. In addition, the regulatory perspective is critical to such development, and approval is discussed, particularly in managing regulatory compliance complexities to ensure successful implementation. The holistic approach provides a comprehensive basis for determining lipid-based drug delivery systems' state-of-the-art and future scope.

Morphological and molecular evidence supporting advantages of apomictic seed production in castor bean (Ricinus communis L.)

BACKGROUND

Ricinus communis L. is a large plant from the spurge family (Euphorbiaceae), grown for industrial and medicinal purposes. In this research, progenies obtained from three types of reproduction, including apomixis, self-pollination, and open-pollination from a worldwide collection of castor bean (14 genotypes), were evaluated based on yield components and agro-morphological traits and the amount of inbreeding depression and apomixis advantages were estimated in each genotype using offspring. In addition, the expression of eight candidate genes for apomixis (including Helic, SERK, BBM, LEC1, ABI3, FUS3, WUS, and GLC) was assessed during three stages of floret development in both apomixis and open-pollination reproductions.

RESULTS

Results of data analysis demonstrated that inbreeding depression for most traits in self-pollinated progenies than apomictic progenies (IDA) was higher compared to inbreeding depression than open-pollinated progenies (IDO). Additionally, the highest inbreeding depression was for seed yield per plant, and genotypes of Isfahan and Benin had the highest IDA (-53.78%) and IDO (-76.95%) for seed yield per plant, respectively. In contrast, apomixis advantage was positive for most traits, and apomixis advantage relative to self-pollinated progenies (AAS) was higher than apomixis advantage relative to open-pollinated progenies (AAO). The highest apomixis advantage was for seed yield per plant, and the highest AAO (424.51%) and AAS (333.85%) for this trait were observed in the Benin genotype. The expression levels of apomixis candidate genes increased in apomixis reproduction vs. open-pollination one and the greatest expression difference was observed for Helic and ABI3 genes promoting somatic embryogenesis in earlier stages of seed development.

CONCLUSIONS

According to the results of this study, apomixis is probably advantageous over both self-pollination and open-pollination methods of reproduction in castor bean and the apomictic progenies were superior in most traits, which is probably due to the accumulation of undesirable alleles in the self-pollinated progenies (inbreeding effects) and the segregation of desirable characteristics in the open-pollinated progenies (segregation effect).

Integrating QTL mapping with transcriptome analysis mined candidate genes of growth stages in castor (Ricinus communis L.)

BACKGROUND

The growth stages largely determine the crop yield, while little is known about their genetic mechanisms in castor. In this study, the QTL mapping and candidate gene mining of growth stages were conducted using populations F2 and BC1, combining with differential expression analysis and weighted gene co-expression network analysis (WGCNA). The traits studied included the emergence date (ED), the budding date of primary spike (PSBD), the flowering date of primary spike (PSFD), the maturation date of primary spike (PSMD), and the maturation date of primary branch spike (PBSMD).

RESULTS

A total of 20 QTLs conferring four traits (ED, PSBD, PSFD and PBSMD) were identified in the F2 population, with a phenotypic variation explained (PVE) of single QTL ranged from 0.24 to 25.46%. Five QTLs underlying PSMD and PBSMD were identified in the BC1 population, with a PVE of single QTL ranged from 4.74 to 10.82%. To our surprise, almost all the identified QTLs were clustered within two marker intervals, the RCM1769-RCM1838 on linkage group 6 and RCM950-RCM917 on linkage group 3. Subsequently, 473 open reading frames (ORFs) were searched out within these two clusters and 110 differentially expressed genes (DEGs) were screened out from these ORFs by the comparative transcriptome clean data (a total of 140.86 G) at the budding date, the initial flowering date and the full flowering date between parental racemes. With these DEGs, five distinct gene co-expression modules were generated using WGCNA. Showing significant differential expression between parents, four candidate genes (LOC8261128, LOC8278994, LOC8281165 and LOC8259049) in module MEturquoise, were recognized and were annotated as RcSYN3, RcNTT, RcGG3 and RcSAUR76 respectively. This finding implies their potential role in regulating the growth stages of castor.

CONCLUSION

In this study, numerous QTLs conferring growth stages were detected and four candidate genes were mined, which need to be functionally validated. The results provided a new insight into the genetic structure of ED, PSBD, PSFD, PSMD and PBSMD, offered the candidate genes and molecular markers for their improvement as well in castor.

Valorization of Oil Cakes in Two-Pot Lactone Biosynthesis Process

Oil cakes are biomass wastes created by pressing oil from oilseeds. Their chemical composition (including high fat or protein content, a favorable fatty acid profile, and a high proportion of unsaturated acids) makes them valuable raw materials not only in animal feeding but are increasingly gaining popularity in biotechnological processes. This article examines the possibility of valorizing oil cakes using the lipid fraction extracted from them or their raw form in a two-pot biosynthesis process of GDDL-a cyclic ester with a creamy-peach aroma. This study tested five types of oil cakes (hemp seeds, rapeseed, safflower, camelina, and flax), analyzing their physicochemical composition and the fatty acid profile of their lipid fraction. Due to the high content of oleic acid (over 62% lipid fraction) and the wide availability, rapeseed cake was used in the biotransformation process. The synthesis of GDDL involved a three-step process: hydrolysis of triacylglycerols, hydration of oleic acid (via lactic acid bacteria in anaerobic conditions), and β-oxidation (via Yarrowia yeast, aerobic process). The analysis showed that it is possible to produce because of the two-pot biotransformation of approximately 1.7 g of GDDL/dm3. These results highlight the process's potential and justify the feasibility of waste valorization. The proposed biotransformation requires optimization and is a good example of the application of the circular economy in food processing and waste management.

The modification and adoption of biolubricants as alternatives in the automotive industry

Lubricants are pivotal in mitigating friction and wear between surfaces, ensuring seamless movement of solid objects. However, the predominant use of petroleum-based lubricants in the automotive and industrial ssectors raises substantial concerns for future energy security. The exploration of vegetable oils as an alternative lubricant in the automotive industry was motivated by the depletion of fossil fuels and escalating environmental concerns. The post-pandemic surge in environmental awareness has intensified the focus on biolubricants. Over the past two decades, the biolubricants field has burgeoned with numerous research, signaling a heightened interest in eco-friendly and sustainable lubrication solutions. This underscores biolubricants as a dynamic and evolving research area with lasting prominence, especially amid ongoing environmental innovation. The review centrally revolves around naturally sourced lubricants, primarily focusing on vegetable oils, which stand out as appealing substitutes for conventional petroleum-based lubricants due to their biodegradability, high lubricity, and elevated flash points. The article delves into modifications to enhance vegetable oil properties, explores the role of additives, and provides insights into current and future prospects. The paper also investigates diverse applications in engine oil, grease, hydraulic oil, and more.

Biotechnological advances in the production of unusual fatty acids in transgenic plants and recombinant microorganisms

Certain plants and microorganisms can produce high amounts of unusual fatty acids (UFAs) such as hydroxy, conjugated, cyclic, and very long-chain polyunsaturated fatty acids, which have distinct physicochemical properties and significant applications in the food, feed, and oleochemical industries. Since many natural sources of UFAs are not ideal for large-scale agricultural production or fermentation, it is attractive to produce them through synthetic biology. Although several UFAs have been commercially or pre-commercially produced in transgenic plants and microorganisms, their contents in transgenic hosts are generally much lower than in natural sources. Moreover, reproducing this success for a wider spectrum of UFAs has remained challenging. This review discusses recent advancements in our understanding of the biosynthesis, accumulation, and heterologous production of UFAs, and addresses the challenges and potential strategies for achieving high UFA content in engineered plants and microorganisms.

A microRNA396b-growth regulating factor module controls castor seed size by mediating auxin synthesis

Castor (Ricinus communis L.) is an importance crop cultivated for its oil and economic value. Seed size is a crucial factor that determines crop yield. Gaining insight into the molecular regulatory processes of seed development is essential for the genetic enhancement and molecular breeding of castor. Here, we successfully fine-mapped a major QTL related to seed size, qSS3, to a 180 kb interval on chromosome 03 using F2 populations (DL01×WH11). A 17.6-kb structural variation (SV) was detected through genomic comparison between DL01 and WH11. Analysis of haplotypes showed that the existence of the complete 17.6 kb structural variant may lead to the small seed characteristic in castor. In addition, we found that qSS3 contains the microRNA396b (miR396b) sequence, which is situated within the 17.6 kb SV. The results of our experiment offer additional evidence that miR396-Growth Regulating Factor 4 (GRF4) controls seed size by impacting the growth and multiplication of seed coat and endosperm cells. Furthermore, we found that RcGRF4 activates the expression of YUCCA6 (YUC6), facilitating the production of IAA in seeds and thereby impacting the growth of castor seeds. Our research has discovered a crucial functional module that controls seed size, offering a fresh understanding of the mechanism underlying seed size regulation in castor.

A Newly Validated HPLC-DAD Method for the Determination of Ricinoleic Acid (RA) in PLGA Nanocapsules

The assessment of ricinoleic acid (RA) incorporated into polymeric nanoparticles is a challenge that has not yet been explored. This bioactive compound, the main component of castor oil, has attracted attention in the pharmaceutical field for its valuable anti-inflammatory, antifungal, and antimicrobial properties. This work aims to develop a new and simple analytical method using high-performance liquid chromatography with diode-array detection (HPLC-DAD) for the identification and quantification of ricinoleic acid, with potential applicability in several other complex systems. The method was validated through analytical parameters, such as linearity, limit of detection and quantification, accuracy, precision, selectivity, and robustness. The physicochemical properties of the nanocapsules were characterized by dynamic light scattering (DLS) to determine their hydrodynamic mean diameter, polydispersity index (PDI), and zeta potential (ZP), via transmission electron microscopy (TEM) and quantifying the encapsulation efficiency. The proposed analytical method utilized a mobile phase consisting of a 65:35 ratio of acetonitrile to water, acidified with 1.5% phosphoric acid. It successfully depicted a symmetric peak of ricinoleic acid (retention time of 7.5 min) for both the standard and the RA present in the polymeric nanoparticles, enabling the quantification of the drug loaded into the nanocapsules. The nanocapsules containing ricinoleic acid (RA) exhibited an approximate size ranging from 309 nm to 441 nm, a PDI lower than 0.2, ζ values of approximately -30 mV, and high encapsulation efficiency (~99%). Overall, the developed HPLC-DAD procedure provides adequate confidence for the identification and quantification of ricinoleic acid in PLGA nanocapsules and other complex matrices.

Evaluation of an Electrochemiluminescence Assay for the Rapid Detection of Ricin Toxin

In this article, we detail a comprehensive laboratory evaluation of an immunoassay for the rapid detection of ricin using the Meso Scale Diagnostics Sector PR2 Model 1800. For the assay evaluation, we used inclusivity, exclusivity, and informational panels comprised of extracts of 35 near-neighbor plant cultivar-extracts, 66 lectins, 26 white powders, 16 closely related toxins and proteins/toxoids, and a pool of 30 BioWatch filter extracts. The results show that the Meso Scale Diagnostics ricin detection assay exhibits good sensitivity and specificity with a limit of detection of 1.2 ng/mL. However, the dynamic range of the assay for the quantitation of ricin was limited. We observed a hook effect at higher ricin concentrations, which can lead to potential false negative results. A modification of the assay protocol that incorporates extra wash steps can decrease the hook effect and the potential for false negative results.

Mass Spectrometric Detection and Differentiation of Enzymatically Active Abrin and Ricin Combined with a Novel Affinity Enrichment Technique

Abrin and ricin are toxic proteins produced by plants. Both proteins are composed of two subunits, an A-chain and a B-chain. The A-chain is responsible for the enzymatic activity, which causes toxicity. The B-chain binds to glycoproteins on the cell surface to direct the A-chain to its target. Both toxins depurinate 28S rRNA, making it impossible to differentiate these toxins based on only their enzymatic activity. We developed an analytical workflow for both ricin and abrin using a single method and sample. We have developed a novel affinity enrichment technique based on the ability of the B-chain to bind a glycoprotein, asialofetuin. After the toxin is extracted with asialofetuin-coated magnetic beads, an RNA substrate is added. Then, depurination is detected by a benchtop matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF) mass spectrometer to determine the presence or absence of an active toxin. Next, the beads are subjected to tryptic digest. Toxin fingerprinting is done on a benchtop MALDI-TOF MS. We validated the assay through sensitivity and specificity studies and determined the limit of detection for each toxin as nanogram level for enzymatic activity and μg level for toxin fingerprinting. We examined potential cross-reactivity from proteins that are near neighbors of the toxins and examined potential false results in the presence of white powders.

The Effect of Rapeseed Oil Biopolyols and Cellulose Biofillers on Selected Properties of Viscoelastic Polyurethane Foams

This paper presents the results of research on polyurethane viscoelastic foams (PUVFs) modified with biomaterials. This investigation looked at the effect of the biomaterials on the foaming processes, as well as the acoustical and selected physical-mechanical properties of the foams. Various types of rapeseed oil biopolyols and microcellulose were used to modify the materials. The analysis of properties covered a reference biopolyol-free sample and materials containing 10 wt.%, 20 wt.%, and 30 wt.% of different types of biopolyols in the mixture of polyol components. The biopolyols differed in terms of functionality and hydroxyl value (OHv). Next, a selected formulation was modified with various microcellulose biofillers in the amount of 0.5-2 wt.%. The PUVFs, with apparent densities of more than 210 kg/m3 and open-cell structures (more than 85% of open cells), showed a slow recovery to their original shape after deformation when the pressure force was removed. They were also characterized by a tensile strength in the range of 156-264 kPa, elongation at break of 310-510%, hardness of 8.1-23.1 kPa, and a high comfort factor of 3.1-7.1. The introduction of biopolyols into the polyurethane system resulted in changes in sound intensity levels of up to 31.45%, while the addition of fillers resulted in changes in sound intensity levels of up to 13.81%.

An Efficient and Rapid Protocol for Somatic Shoot Organogenesis from Juvenile Hypocotyl-Derived Callus of Castor Bean cv. Zanzibar Green

Aseptic seedlings of different ages derived from surface-sterilized mature seeds were applied as an explant source. Various explants such as 7- and 21-day-old hypocotyl fragments, 42-day-old nodal stem segments, and transverse nodal segments of stem, as well as leaf petioles, were cultured on the agar-solidified Murashige and Skoog (MS) basal medium supplemented with 0.1 mg/L IAA, 5 mg/L AgNO3 and different types and concentrations of cytokinin (1 mg/L zeatin, 0.25 mg/L thidiazuron (TDZ), and 5 mg/L 6-benzylaminopurine (6-BAP)). Consequently, it was found that 7- and 21-day-old hypocotyl fragments, as well as nodal stem segments obtained from adult aseptic seedlings, are characterized by a high explant viability and callus formation capacity with a frequency of 79.7-100%. However, the success of in vitro somatic shoot organogenesis was significantly determined not only by the culture medium composition and explant type but also depending on its age, as well as on the size and explant preparation in cases of hypocotyl and age-matched nodal stem fragments, respectively. Multiple somatic shoot organogenesis (5.7 regenerants per explant) with a frequency of 67.5% was achieved during 3 subcultures of juvenile hypocotyl-derived callus tissue on MS culture medium containing 0.25 mg/L TDZ as cytokinin source. Castor bean regenerants were excised from the callus and successfully rooted on ½ MS basal medium without exogenous auxin (81%). In vitro plantlets with well-developed roots were adapted to ex vitro conditions with a frequency of 90%.

The relation between apomictic seed production and morpho-physiological characteristics in a world collection of castor bean (Ricinus communis L.)

Ricinus communis is one of the most important oilseed plants with many medicinal and industrial applications. Variation in 30 genotypes of castor bean collected from different regions of the world was evaluated for two consecutive years and the difference in seed production with two different reproductive modes (including apomixis and open-pollination) was compared based on yield components, agronomic traits, and phytochemical properties. Results of data analysis demonstrated that castor bean has the ability for a wide range of apomixis for seed production and the highest percentages of apomixis ability in the first and second years were 86.3% and 92.31%, respectively. Apomixis ability had a high positive correlation with yield components, seed oil content, and the amount of leaf rutin. Two genotypes from Brazil and Syria revealed the highest phenolic content in the first and second years, respectively. In addition, the Afghanistan genotype in two modes of apomixis and open-pollination in the first year and the Syria and Yazd genotypes in apomixis and open-pollination modes, respectively, in the second year showed the highest content of seed fatty acids. It is possible to maintain superior genotypes of castor bean in terms of phytochemical traits, yield, and oil quality through apomixis reproduction.

PDAT1 genome editing reduces hydroxy fatty acid production in transgenic Arabidopsis

The fatty acids content of castor (Ricinus communis L.) seed oil is 80-90% ricinoleic acid, which is a hydroxy fatty acid (HFA). The structures and functional groups of HFAs are different from those of common fatty acids and are useful for various industrial applications. However, castor seeds contain the toxin ricin and an allergenic protein, which limit their cultivation. Accordingly, many researchers are conducting studies to enhance the production of HFAs in Arabidopsis thaliana, a model plant for oil crops. Oleate 12-hydroxylase from castor (RcFAH12), which synthesizes HFA (18:1-OH), was transformed into an Arabidopsis fae1 mutant, resulting in the CL37 line producing a maximum of 17% HFA content. In addition, castor phospholipid:diacylglycerol acyltransferase 1-2 (RcPDAT1-2), which catalyzes the production of triacylglycerol by transferring HFA from phosphatidylcholine to diacylglycerol, was transformed into the CL37 line to develop a P327 line that produces 25% HFA. In this study, we investigated changes in HFA content when endogenous Arabidopsis PDAT1 (AtPDAT1) of the P327 line was edited using the CRISPR/Cas9 technique. The successful mutation resulted in three independent lines with different mutation patterns, which were transmitted until the T4 generation. Fatty acid analysis of the seeds showed that HFA content decreased in all three mutant lines. These findings indicate that AtPDAT1 as well as RcPDAT1-2 in the P327 line are involved in transferring and increasing HFAs to triacylglycerol. [BMB Reports 2024; 57(2): 86-91].

Engineering Yarrowia lipolytica for sustainable ricinoleic acid production: A pathway to free fatty acid synthesis

Ricinoleic acid (C18:1-OH, RA) is a valuable hydroxy fatty acid with versatile applications. The current industrial source of RA relies on the hydrolysis of castor bean oil. However, the coexistence of the toxic compound ricin and the unstable supply of this plant have led to an exploration of promising alternatives: generating RA in heterologous plants or microorganisms. In this study, we engineered the oleaginous yeast Yarrowia lipolytica to produce RA in the form of free fatty acids (FFA). First, we overexpressed fungal Δ12 oleate hydroxylase gene (CpFAH12) from Claviceps purpurea while deleting genes related to fatty acid degradation (MEF1 and PEX10) and oleic acid desaturation (FAD2). Since Δ12 oleate hydroxylase converts oleic acid (C18:1) located at the sn-2 position of phosphatidylcholine (PC), we next focused on increasing the PC pool containing oleic acid. This objective was achieved thorough implementing metabolic engineering strategies designed to enhance the biosynthesis of PC and C18 fatty acids. To increase the PC pool, we redirected the flux towards phospholipid biosynthesis by deleting phosphatidic acid phosphatase genes (PAH1 and APP1) and diacylglycerol acyltransferase gene (DGA1), involved in the production of diacylglycerol and triacylglycerol, respectively. Furthermore, the PC biosynthesis via the CDP-DAG pathway was enhanced through the overexpression of CDS1, PSD1, CHO2, and OPI3 genes. Subsequently, to increase the oleic acid content within PC, we overexpressed the heterologous fatty acid elongase gene (MaC16E) involved in the conversion of C16 to C18 fatty acids. As RA production titer escalated, the produced RA was mainly found in the FFA form, leading to cell growth inhibition. The growth inhibition was mitigated by inducing RA secretion via Triton X-100 treatment, a process that simultaneously amplified RA production by redirecting flux towards RA synthesis. The final engineered strain JHYL-R146 produced 2.061 g/L of free RA in a medium treated with 5% Triton X-100, constituting 74% of the total FFAs produced. Generating free RA offers the added benefit of bypassing the hydrolysis stage required when employing castor bean oil as an RA source. This achievement represents the highest level of RA synthesis from glucose reported thus far, underscoring the potential of Y. lipolytica as a host for sustainable RA production.

The Search for Antidotes Against Ricin

The castor plant (Ricinus communis) is primarily known for its seeds, which contain a unique fatty acid called ricinoleic acid with several industrial and commercial applications. Castor seeds also contain ricin, a toxin considered a chemical and biological warfare agent. Despite years of investigation, there is still no effective antidote or vaccine available. However, some progress has been made, and the development of an effective treatment may be on the horizon. To provide an updated overview of this issue, we have conducted a comprehensive review of the literature on the current state of research in the fight against ricin. This review is based on the reported research and aims to address the challenges faced by researchers, as well as highlight the most successful cases achieved thus far. Our goal is to encourage the scientific community to continue their efforts in this critical search.

The Effect of Plasma-Treated Water on Microbial Growth and Biosynthesis of Gamma-Decalactones by Yarrowia lipolytica Yeast

In recent years, the production of plasma-treated water (PTW) by low-temperature low-pressure glow plasma (LPGP) has been increasingly gaining in popularity. LPGP-treated water changes its physical and physiochemical properties compared to standard distilled water. In this study, a non-conventional lipolytic yeast species Yarrowia lipolytica was cultivated in culture media based on Nantes plasma water with heightened singlet oxygen content (Nantes PW) or in water treated with low-temperature, low-pressure glow plasma while in contact with air (PWTA) or nitrogen (PWTN). The research aimed to assess the influence of culture conditions on castor oil biotransformation to gamma-decalactone (GDL) and other secondary metabolites in media based on nanowater. The Nantes plasma water-based medium attained the highest concentration of gamma-decalactone (4.81 ± 0.51 g/L at 144 h of culture), maximum biomass concentration and biomass yield from the substrate. The amplified activity of lipases in the nanowater-based medium, in comparison to the control medium, is encouraging from the perspective of GDL biosynthesis, relying on the biotransformation of ricinoleic acid, which is the primary component of castor oil. Although lipid hydrolysis was enhanced, this step seemed not crucial for GDL concentration. Interestingly, the study validates the significance of oxygen in β-oxidation enzymes and its role in the bioconversion of ricinoleic acid to GDL and other lactones. Specifically, media with higher oxygen content (WPTA) and Nantes plasma water resulted in remarkably high concentrations of four lactones: gamma-decalactone, 3-hydroxy-gamma-decalactone, dec-2-en-4-olide and dec-3-en-4-olide.

Production of Bio-Based Polyol from Coconut Fatty Acid Distillate (CFAD) and Crude Glycerol for Rigid Polyurethane Foam Applications

This study propounds a sustainable alternative to petroleum-based polyurethane (PU) foams, aiming to curtail this nonrenewable resource's continued and uncontrolled use. Coconut fatty acid distillate (CFAD) and crude glycerol (CG), both wastes generated from vegetable oil processes, were utilized for bio-based polyol production for rigid PU foam application. The raw materials were subjected to catalyzed glycerolysis with alkaline-alcohol neutralization and bleaching. The resulting polyol possessed properties suitable for rigid foam application, with an average OH number of 215 mg KOH/g, an acid number of 7.2983 mg KOH/g, and a Gardner color value of 18. The polyol was used to prepare rigid PU foam, and its properties were determined using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis/derivative thermogravimetric (TGA/DTA), and universal testing machine (UTM). Additionally, the cell foam morphology was investigated by scanning electron microscope (SEM), in which most of its structure revealed an open-celled network and quantified at 92.71% open-cell content using pycnometric testing. The PU foam thermal and mechanical analyses results showed an average compressive strength of 210.43 kPa, a thermal conductivity of 32.10 mW·m-1K-1, and a density of 44.65 kg·m-3. These properties showed its applicability as a type I structural sandwich panel core material, thus demonstrating the potential use of CFAD and CG in commercial polyol and PU foam production.

From Lignins to Renewable Aromatic Vitrimers based on Vinylogous Urethane

During the two last decades, covalent adaptable networks (CANs) have proven to be an important new class of polymer materials combining the main advantages of thermoplastics and thermosets. For instance, materials can undergo reprocessing cycles by incorporating dynamic covalent bonds within a cross-linked network. Due to their versatility, renewable resources can be easily integrated into these innovative systems to develop sustainable materials, which can be related to the context of the recent development of a circular bioeconomy. Lignins, the main renewable sources of aromatic structures, are major candidates in the design of novel and biobased stimuli-responsive materials such as vitrimers due to their high functionality and specific chemical architectures. In the aim of developing recyclable lignin-based vinylogous urethane (VU) networks, an innovative strategy was elaborated in which lignin was first modified into liquid polyols and then into polyacetoacetates. Resulting macromonomers were integrated into aromatic VU networks and fully characterized through thermal, mechanical, and rheological experiments. Viscoelastic behaviors of the different aromatic vitrimers exhibited fast stress-relaxations (e. g., 39 s at 130 °C) allowing easy and fast mechanical reprocessing. A thermomechanical recycling study was successfully performed. Then, the developed strategy enabled the fabrication of healable biobased aromatic vitrimers with tunable structures and properties.

Cloning and Functional Verification of Endogenous U6 Promoters for the Establishment of Efficient CRISPR/Cas9-Based Genome Editing in Castor (Ricinus communis)

Castor (Ricinus communis) seeds are rich in a type of hydroxy fatty acid called ricinoleic acid, which is in high demand for the production of plant-based plastics, lubricants, and hydraulic oils. However, the high content of ricin, a toxic protein, in these seeds has restricted further expansion in the area of castor cultivation. Therefore, the development of ricin-free castor is needed. Genome editing technology, although successfully applied in several plant species, is still in the developing stages in castor and awaits the identification of an endogenous U6 promoter with robust function. Here, we searched for U6 small nuclear RNA (snRNA) genes in the castor genome. This led to the identification of six U6 snRNA genes. The promoters of these U6 snRNA genes were cloned, and their function was examined in castor cells using the particle delivery method. The results showed that a U6 promoter length of approximately 300 bp from the transcription start site was sufficient to activate gene expression. This study provides insights into the endogenous castor U6 promoter sequences and outlines a method for verifying the function of U6 promoters in plants using the particle delivery system.

Experimental and theoretical assessment of phenomena linked with separation and purification of biodiesel from Ricinus communis seed oil

This study investigated the phenomena associated with the separation and purification of biodiesel produced from Ricinus communis oil seeds using experimental and theoretical approaches. The alkaline transesterification technique was used to produce the biodiesel from the Ricinus communis oil seeds which were later compared with standards based on EN and ASTM. Experimental investigation of the components in the mixture for separation and purification was conducted using the standard turbidimetric method for binodal solubility and tie-line compositions. The gas chromatographic technique was used to determine the composition of the homogeneous mixture. Novel components separation and purification of the Ricinus communis seed oil biodiesel was achieved using ternary diagrams highlighting the constituent components of the biodiesel at different temperatures for enhanced separation and purification. At the coexisting extract and raffinate phases, the orientation angle of the component compositions increases as the methanol concentration increases and temperature increases. The analysis of seed oil in terms of its physicochemical properties showed density, refractive index, acid value, and free fatty acid values of 905 kg/m³, 1.486, 0.79 mg KOH/g, and 0.390 mg KOH/g respectively. The fatty acid composition of the seed oil and biodiesel revealed that the major characteristics of the oil and biodiesel were defined by the presence of linoleic acid (C_18:2) and a ricinoleic acid hydroxyl group (C_18:1, OH) with compositions of approximately 30% and 20% respectively. Fourier Transform Infra-Red (FTIR) spectrometry analysis of the oil and biodiesel showed that the absorption spectrum in terms of the wave number (cm^-1) ranged from 1000 to 4000 cm^-1 with esters as the main functional group providing the main structural backbone. The presence of different fatty acids leads to lateral homogeneity of the biodiesel molecules which can serve to organize the molecules into discrete domains with different properties for enhanced separation and purification at the investigated temperatures. Optimal separation and purification were achieved at the different temperatures showing the castor oil biodiesel, glycerol, and methanol components system at the prevailing composition, time, and temperatures from the tie-lines and binodal solubility compositions. This approach provides a means for the design of a more efficient separation process for optimal biodiesel purification after production with knowledge of how the components are distributed in the ternary mixture after the transesterification reaction. This, leads to greater efficiency of the process, reducing material and operational costs and eliminating environmental issues linked with the biodiesel production process as the volume of wastewater generated would be hugely eradicated. The findings of this study will be useful in the setting up of a small-to-medium-size biodiesel production facility with improvement in the efficiency of product separation and purification.

Enzymatic and Synthetic Routes of Castor Oil Epoxidation

Epoxidation of castor oil in synthetic and enzymatic routes was carried out in order to promote a system with less environmental impact. The epoxidation reactions of castor oil compounds upon addition of lipase enzyme with and without acrylic immobilization and with reaction times of 24 and 6 h, as well as the synthetic compounds upon addition of Amberlite resin and formic acid, were investigated using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance in hydrogen molecules (¹H-NMR). The analysis indicated that the enzymatic reactions (6 h) and synthetic reactions provided a conversion from 50 to 96% and epoxidation from 25 to 48%, resulting from peak stretching and signal disintegration in the hydroxyl region due to the appearance of H₂O in the interaction of peracid with catalyst. In systems without toluene, a dehydration event with a peak absorbance of 0.02 AU, indicating a possible vinyl group at 2355 cm^-1 in enzymatic reactions without acrylic immobilization, was observed and resulted in a selectivity of 2%. In the absence of a solid catalyst, an unsaturation conversion of castor oil above 90% was achieved; however, this catalyst is necessary for the epoxidation to take place, whereas the lipase enzyme becomes able of epoxidizing and dehydrating the castor oil upon changing the time or reaction system. The conversation from 28 to 48% of solid catalysts (Amberlite and lipase enzyme) displays their importance to the instauration conversion of castor oil into oxirane rings.

Self-Assembling Nanoarchitectonics of Twisted Nanofibers of Fluorescent Amphiphiles as Chemo-Resistive Sensor for Methanol Detection

The inhalation, ingestion, and body absorption of noxious gases lead to severe tissue damage, ophthalmological issues, and neurodegenerative disorders; death may even occur when recognized too late. In particular, methanol gas present in traces can cause blindness, non-reversible organ failure, and even death. Even though ample materials are available for the detection of methanol in other alcoholic analogs at ppm level, their scope is very limited because of the use of either toxic or expensive raw materials or tedious fabrication procedures. In this paper, we report on a simple synthesis of fluorescent amphiphiles achieved using a starting material derived from renewable resources, this material being methyl ricinoleate in good yields. The newly synthesized bio-based amphiphiles were prone to form a gel in a broad range of solvents. The morphology of the gel and the molecular-level interaction involved in the self-assembly process were thoroughly investigated. Rheological studies were carried out to probe the stability, thermal processability, and thixotropic behavior. In order to evaluate the potential application of the self-assembled gel in the field of sensors, we performed sensor measurements. Interestingly, the twisted fibers derived from the molecular assembly could be able to display a stable and selective response towards methanol. We believe that the bottom-up assembled system holds great promise in the environmental, healthcare, medicine, and biological fields.

FEMA GRAS assessment of natural flavor complexes: Lemongrass oil, chamomile oils, citronella oil and related flavoring ingredients

In 2015, the Expert Panel of the Flavor and Extract Manufacturers Association (FEMA) initiated a program for the re-evaluation of the safety of over 250 natural flavor complexes (NFCs) used as flavor ingredients. This publication, eleventh in the series, evaluates the safety of NFCs characterized by primary alcohol, aldehyde, carboxylic acid, ester and lactone constituents derived from terpenoid biosynthetic pathways and/or lipid metabolism. The Expert Panel uses the scientific-based evaluation procedure published in 2005 and updated in 2018 that relies on a complete constituent characterization of the NFC intended for commerce and organization of the constituents of each NFC into well-defined congeneric groups. The safety of the NFCs is evaluated using the well-established and conservative threshold of toxicological concern (TTC) concept in addition to data on estimated intake, metabolism and toxicology of members of the congeneric groups and for the NFC under evaluation. The scope of the safety evaluation contained herein does not include added use in dietary supplements or any products other than food. Twenty-three NFCs, derived from the Hibiscus, Melissa, Ricinus, Anthemis, Matricaria, Cymbopogon, Saussurea, Spartium, Pelargonium, Levisticum, Rosa, Santalum, Viola, Cryptocarya and Litsea genera were affirmed as generally recognized as safe (GRAS) under their conditions of intended use as flavor ingredients based on an evaluation of each NFC and the constituents and congeneric groups therein.

Deployment of AMMI, GGE-biplot and MTSI to select elite genotypes of castor (Ricinus communis L.)

Castor (Ricinus communis L.) is an important industrial multipurpose non-edible oilseed C₃ crop belongs to spurge family popularly known as Euphorbiaceae. Its oil has exceptional properties which provides an industrial importance to this crop. The present investigation is aimed to judge the stability and performance of yield and yield assigning traits and selection of suitable genotype for varied locality of western rainfed regions of India. During the study with 90 genotypes, the genotype × environment interaction was found to be significant for seed yield per plant as well as for plant height up to primary raceme, total length of primary raceme, effective length of primary raceme, capsules on main raceme and effective number of racemes per plant. E₁ is the least interactive and highly representative site for seed yield. Which won where and what biplot decipher ANDCI 10-01 as vertex genotype for E₃ while ANDCI 10-03 and P₃141 for E₁ and E₂. Average Environment co-ordinate identify ANDCI 10-01, P₃141, P₃161, JI 357 and JI 418 as tremendously stable and high seed yielding genotypes. The study outlined the pertinency of Multi Trait Stability Index, that calculated based on the genotype-ideotype distance as the multiple interacting variables. MTSI evaluated all genotypes and sort ANDCI 12-01, JI 413, JI 434, JI 380, P₃141, ANDCI 10-03, SKI 215, ANDCI 09, SI 04, JI 437, JI 440, RG 3570, JI 417 and GAC 11 with maximum stability and high mean performance of analyzed interacting traits.

Medical Countermeasures against Ricin Intoxication

Ricin toxin is a disulfide-linked glycoprotein (AB toxin) comprising one enzymatic A chain (RTA) and one cell-binding B chain (RTB) contained in the castor bean, a Ricinus species. Ricin inhibits peptide chain elongation via disruption of the binding between elongation factors and ribosomes, resulting in apoptosis, inflammation, oxidative stress, and DNA damage, in addition to the classically known rRNA damage. Ricin has been used in traditional medicine throughout the world since prehistoric times. Because ricin toxin is highly toxic and can be readily extracted from beans, it could be used as a bioweapon (CDC B-list). Due to its extreme lethality and potential use as a biological weapon, ricin toxin remains a global public health concern requiring specific countermeasures. Currently, no specific treatment for ricin intoxication is available. This review focuses on the drugs under development. In particular, some examples are reviewed to demonstrate the proof of concept of antibody-based therapy. Chemical inhibitors, small proteins, and vaccines can serve as alternatives to antibodies or may be used in combination with antibodies.

Evaluating the release and metabolism of ricinine from castor cake fertilizer in soils using a LC-QTOF/MS coupled with SIRIUS workflow

Castor cake is a major by-product generated after castor oil extraction and has been widely used as an organic fertilizer. Once applied to soil, a toxic alkaloid ricinine in castor cake may be released into soils and subsequently taken up by crops, which poses a potential threat to food safety and human health. However, the environmental fate of castor cake derived ricinine in agroecosystems remains unclear. In this study, the release and metabolism of ricinine in soils were conducted using soil pot experiments with different castor cake application rates. The analytical methodology of ricinine quantification in soil pore water was first established using solid phase extraction (SPE) coupled with liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF/MS). A non-target screening workflow associated with LC-QTOF/MS and SIRIUS platform was further developed to identify ricinine metabolites in soil pore water. After castor cake application, the ricinine concentrations in soil pore water significantly increased to 297-7990 μg L^-1 at 1 day and then gradually decreased to 62.1-3460 μg L^-1 at 7 days and 1.70-279 μg L^-1 at 14 days for the selected two tested soils with castor cake application rates of 2, 10, and 20 g castor cake/kg soil. In addition, two ricinine metabolites R-194 and R-180 were tentatively identified and one ricinine metabolite N-demethyl-ricinin was confirmed through authentic reference standard for the first time by the developed non-target screening workflow. This study highlights the release and metabolism of toxic alkaloid ricinine in soils once applied castor cake as an organic fertilizer. Ricinine could be released into soil pore water in a short-term after castor cake application and then undergo demethylation, hydroxylation, and hydroxylation followed by methylation metabolisms over time in agroecosystems.

Lipozyme® TL IM Biocatalyst for Castor Oil FAME and Triacetin Production by Interesterification: Activity, Stability, and Kinetics

Global climate change and present geopolitical tensions call for novel, renewable, and, ideally, sustainable resources and processes that, in the end, will be integrated in the natural cycles of carbon and water, progressively replacing non-renewable feedstocks. In this context, the production of biofuels and, in consequence, of biodiesel plays a notable role. This work is focused on the production of fatty acid methyl esters (FAME) from castor oil, an abundant non-edible oil, using a sustainable technology approach based on industrial lipases and methyl acetate as a methylating reagent to reduce biocatalyst inactivation. We have selected a stable industrial enzyme preparation to determine its suitability for FAME production: Lipozyme® TL IM (an inexpensive lipase from Thermomyces lanuginosus immobilized by agglomeration in silica gel). Several operational variables affecting the enzyme activity have been studied: methanol excess (6:1 to 13:1), temperature (from 40 to 60 °C), and enzyme concentration (10 and 30% w/w). At all temperatures and reagent ratios, we have also tested the enzyme stability for six cycles, showing its low to negligible inactivation under operational conditions. Finally, a novel multivariable kinetic model has been proposed and fitted to experimental data obtained in a wide experimental range for the first time, showing that direct and reverse in-series reactions are present. We have estimated the values of the kinetic constants and their standard errors, and goodness-of-fit parameters, observing that the kinetic model fitted very reasonably to all retrieved experimental data at the same time.

Development of fiber optic in vitro release testing method for dexamethasone release from the oil solutions

For many parenteral drugs, there is still no standardized method for in vitro release (IVR) testing available. This article presents the development of a new IVR method for oil solutions using a dialysis membrane and USP II apparatus coupled to a fiber optic UV-Vis spectrometer. Experiments were performed using dexamethasone formulations containing castor oil as a solvent with the addition of cosolvents, 20 % (v/v) of isopropanol or Capryol^® 90. Based on solubility testing results, castor oil was chosen as the best solvent amongst other vegetable oils, while a significant increase in solubility was obtained by adding either of the two cosolvents. Partitioning experiments were performed to ensure these formulations could achieve prolonged drug release. IVR testing was performed with model formulations and critical test parameters were varied in order to examine the method's sensitivity. The developed method was sensitive to temperature and stirring rate, while coupling the USP II apparatus with a fiber optic UV-Vis spectrometer enabled complete automation. Moreover, due to the interference of excipients on fiber optic detection of dexamethasone during the release testing, derivative spectroscopy was successfully introduced for the elimination of the interference. The developed IVR method described herein could be useful in preformulation investigations and the early development of novel formulations.

Nutraceutical and Pharmaceutical Behavior of Bioactive Compounds of Miracle Oilseeds: An Overview

India plays an important role in the production of oilseeds, which are mainly cultivated for future extraction of their oil. In addition to the energic and nutritional contribution of these seeds, oilseeds are rich sources of bioactive compounds (e.g., phenolic compounds, proteins, minerals). A regular and moderate dietary supplementation of oilseeds promotes health, prevents the appearance of certain diseases (e.g., cardiovascular diseases (CVDs), cancers) and delays the aging process. Due to their relevant content in nutraceutical molecules, oilseeds and some of their associated processing wastes have raised interest in food and pharmaceutical industries searching for innovative products whose application provides health benefits to consumers. Furthermore, a circular economy approach could be considered regarding the re-use of oilseeds’ processing waste. The present article highlights the different oilseed types, the oilseeds-derived bioactive compounds as well as the health benefits associated with their consumption. In addition, the different types of extractive techniques that can be used to obtain vegetable oils rich from oilseeds, such as microwave-assisted extraction (MAE), ultrasonic-assisted extraction (UAE) and supercritical fluid extraction (SFE), are reported. We conclude that the development and improvement of oilseed markets and their byproducts could offer even more health benefits in the future, when added to other foods.

Enhanced production of hydroxy fatty acids in Arabidopsis seed through modification of multiple gene expression

BACKGROUND

Castor (Ricinus communis L.) seeds contain unusual fatty acid, hydroxy fatty acid (HFA) used as a chemical feedstock for numerous industrial products. Castor cultivation is limited by the potent toxin ricin in its seeds and other poor agronomic traits, so it is advantageous to develop a suitable HFA-producing crop. Significant research efforts have been made to produce HFA in model Arabidopsis, but the level of HFA produced in transgenic Arabidopsis is much less than the level found in castor seeds which produce 90% HFA in seed oil.

RESULTS

We designed a transformation construct that allowed co-expression of five essential castor genes (named pCam5) involved in HFA biosynthesis, including an oleate [Formula: see text] 12-hydroxylase (FAH12), diacylglycerol (DAG) acyltransferase 2 (DGAT2), phospholipid: DAG acyltransferase 1-2 (PDAT1-2), phosphatidylcholine (PC): DAG cholinephosphotransferase (PDCT) and Lyso-PC acyltransferase (LPCAT). Transgenic Arabidopsis pCam5 lines produced HFA counting for 25% in seed oil. By knocking out Arabidopsis Fatty acid elongase 1 (AtFAE1) in pCam5 using CRISPR/Cas9 technology, the resulted pCam5-atfae1 lines produced over 31% of HFA. Astonishingly, the pCam5-atfae1 line increased seed size, weight, and total oil per seed exceeding wild type by 40%. Seed germination, seedling growth and seed mucilage content of pCam5-atfae1 lines were not affected by the genetic modification.

CONCLUSIONS

Our results provide not only insights for future research uncovering mechanisms of HFA synthesis in seed, but also metabolic engineering strategies for generating safe HFA-producing crops.

Development of Olive Oil and α-Tocopherol Containing Emulsions Stabilized by FucoPol: Rheological and Textural Analyses

Biobased raw materials like natural polysaccharides are increasingly sought by the cosmetic industry for their valuable properties. Such biodegradable and usually non-cytotoxic biopolymers are commonly used in skin-care products as rheological modifiers, bioemulsifiers and/or bioactive ingredients. FucoPol is a natural polysaccharide with reported biocompatibility, emulsion-forming and stabilizing capacity, shear-thinning behavior and bioactivity (e.g., antioxidant capacity, wound healing ability) that potentiate its utilization in skin-care products. In this study, olive oil and α-tocopherol containing emulsions were stabilized with FucoPol. Although the presence of α-tocopherol negatively impacted the emulsions’ stability, it increased their emulsification index (EI). Moreover, FucoPol outperformed the commercial emulsifier Sepigel^® 305, under the tested conditions, with higher EI and higher stability under storage for 30 days. The formulation of FucoPol-based emulsions with olive oil and α-tocopherol was studied by Response Surface Methodology (RSM) that allowed the definition of the ingredients’ content to attain high emulsification. The RSM model established that α-tocopherol concentration had no significant impact on the EI within the tested ranges, with optimal emulsification for FucoPol concentration in the range 0.7–1.2 wt.% and olive oil contents of 20–30 wt.%. Formulations with 25 wt.% olive oil and either 0.5 or 2.0 wt.% α-tocopherol were emulsified with 1.0 wt.% or 0.7 wt.% FucoPol, respectively, resulting in oil-in-water (O/W) emulsions. The emulsions had similar shear-thinning behavior, but the formulation with higher FucoPol content displayed higher apparent viscosity, higher consistency, as well as higher firmness, adhesiveness and cohesiveness, but lower spreadability. These findings show FucoPol’s high performance as an emulsifier for olive oil/α-tocopherol, which are supported by an effective impact on the physicochemical and structural characteristics of the emulsions. Hence, this natural polysaccharide is a potential alternative to other emulsifiers.

Suppression of Physaria fendleri SDP1 Increased Seed Oil and Hydroxy Fatty Acid Content While Maintaining Oil Biosynthesis Through Triacylglycerol Remodeling

Physaria fendleri is a burgeoning oilseed crop that accumulates the hydroxy fatty acid (HFA), lesquerolic acid, and can be a non-toxic alternative crop to castor for production of industrially valuable HFA. Recently, P. fendleri was proposed to utilize a unique seed oil biosynthetic pathway coined "triacylglycerol (TAG) remodeling" that utilizes a TAG lipase to remove common fatty acids from TAG allowing the subsequent incorporation of HFA after initial TAG synthesis, yet the lipase involved is unknown. SUGAR DEPENDENT 1 (SDP1) has been characterized as the dominant TAG lipase involved in TAG turnover during oilseed maturation and germination. Here, we characterized the role of a putative PfeSDP1 in both TAG turnover and TAG remodeling. In vitro assays confirmed that PfeSDP1 is a TAG lipase and demonstrated a preference for HFA-containing TAG species. Seed-specific RNAi knockdown of PfeSDP1 resulted in a 12%-16% increase in seed weight and 14%-19% increase in total seed oil content with no major effect on seedling establishment. The increase in total oil content was primarily due to ~4.7% to ~14.8% increase in TAG molecular species containing two HFA (2HFA-TAG), and when combined with a smaller decrease in 1HFA-TAG content the proportion of total HFA in seed lipids increased 4%-6%. The results are consistent with PfeSDP1 involved in TAG turnover but not TAG remodeling to produce 2HFA-TAG. Interestingly, the concomitant reduction of 1HFA-TAG in PfeSDP1 knockdown lines suggests PfeSDP1 may have a role in reverse TAG remodeling during seed maturation that produces 1HFA-TAG from 2HFA-TAG. Overall, our results provide a novel strategy to enhance the total amount of industrially valuable lesquerolic acid in P. fendleri seeds.

Production of Biodiesel from Mixed Castor Seed and Microalgae Oils: Optimization of the Production and Fuel Quality Assessment

The diminishing reserves and environmental consequences of the fossil fuel-based petrodiesel necessitate the exploration of an alternative fuel with better quality and minimum environmental impacts. The study explores the optimization of biodiesel production from nonfood and locally available mixed feedstocks as an effective and a sustainable approach to solve the insufficiency and high costs of single oil feedstock. The selection of suitable oil feedstocks and optimization of process variables are the prime issues for cost-effective industrial scale production of biodiesel from mixed feedstocks toward the industrial scale production of biodiesel. The objective of this study was to optimize process variables for the alkaline transesterification of mixed castor seed and microalgae oils to optimize the yield of biodiesel. Oils were extracted from dried microalgae (Chlorella vulgaris) biomass and castor seed kernel using methanol. The oils were purified, characterized, mixed in a 1 : 1 ratio, and converted to biodiesel. The transesterification experiments designed according to the central composite design (CCD) were used to optimize the yield of biodiesel through the response surface methodology (RSM). Experimental results were analyzed by response surface regression to produce a model for predicting biodiesel yield. Model significance, fitness, the effect of significant variables, and interactions between the variables on the yield of biodiesel were studied through the analysis of variance (ANOVA). The optimization of transesterification process variables revealed that the catalyst concentration of 1.23% (w/w), ethanol to mixed oil ratio of 5.94 : 1 (v/v), and reaction temperature of 51.0°C were the optimum conditions to achieve an optimum biodiesel yield of 92.88%. Validation experiments conducted under the optimum conditions resulted in the biodiesel yield of 92.36%, which is very close to the model predicted value. Various standard methods were used to characterize the biodiesel produced under optimum conditions, and it was found compatible with ASTM 751 and EN14214 biodiesel standards.

Ultrasound Study of Magnetic and Non-Magnetic Nanoparticle Agglomeration in High Viscous Media

Ultrasound attenuation spectroscopy has found wide application in the study of colloidal dispersions such as emulsions or suspensions. The main advantage of this technique is that it can be applied to relatively high concentration systems without sample preparation. In particular, the use of Epstein-Carhart-Allegra-Hawley's (ECAH) ultrasound scattering theory, along with experimental data of ultrasound velocity or attenuation, provide the method of estimation for the particle or droplet size from nanometers to millimeters. In this study, suspensions of magnetite and silica nanoparticles in high viscous media (i.e., castor oil) were characterized by ultrasound spectroscopy. Both theoretical and experimental results showed a significant difference in ultrasound attenuation coefficients between the suspensions of magnetite and silica nanoparticles. The fitting of theoretical model to experimental ultrasound spectra was used to determine the real size of objects suspended in a high viscous medium that differed from the size distributions provided by electron microscopy imaging. The ultrasound spectroscopy technique demonstrated a greater tendency of magnetic particles toward agglomeration when compared with silica particles whose sizes were obtained from the combination of experimental and theoretical ultrasonic data and were more consistent with the electron microscopy images.

A critical look at challenges and future scopes of bioactive compounds and their incorporations in the food, energy, and pharmaceutical sector

Bioactive compounds refer to secondary metabolites extracted from plants, fungi, microbes, or animals. Besides having pharmacological or toxicological effects on organisms leading to utilization in food and pharmaceutical industries, the discovery of novel properties of such compounds has led to the diversification of their applications, ranging from cosmetics and functionalized biomaterials to bioremediation and alternate fuels. Conventional time-consuming and solvent-intensive methods of extraction are increasingly being replaced by green solvents such as ionic liquids, supercritical fluids, and deep eutectic solvents, as well as non-conventional methods of extraction assisted by microwaves, pulse electric fields, enzymes, ultrasound, or pressure. These methods, along with advances in characterization and optimization strategies, have boosted the commercial viability of extraction especially from agrowastes and organic residues, promoting a sustainable circular economy. Further development of microfluidics, optimization models, nanoencapsulation, and metabolic engineering are expected to overcome certain limitations that restrict the growth of this field, in the context of improving screening, extraction, and economy of processes, as well as retaining biodiversity and enhancing the stability and functionality of such compounds. This review is a compilation of the various extraction and characterization methods employed for bioactive compounds and covers major applications in food, pharmacy, chemicals, energy, and bioremediation. Major limitations and scope of improvement are also discussed.

Physico-chemical characteristics and oxidative stability of oils from different Peruvian castor bean ecotypes

The aim of this research was to assess the physico-chemical properties and shelf-life of oils press-extracted at two temperatures (60 °C and 80 °C) from five Peruvian castor bean ecotypes. A wide variation for all traits was observed. Low acidity index, low peroxide index and absence of p-anisidine were recorded. The total tocopherol contents ranged from 798 to 1040 mg/kg. A higher antioxidant capacity was detected in methanolic extracts than in hexane extract. From the Rancimat performed at 150-170 °C, the predicted shelf-life at 25 °C ranged from 0.15 to 8.93 years; the higher extraction temperature led to a longer shelf-life, probably because of enzyme inactivation.