Assay for screening for six antimalarial drugs and one metabolite using dried blood spot sampling, sequential extraction and ion-trap detection

Determination of sulfadoxine and pyrimethamine in microvolume human plasma using ultra high performance liquid chromatography-tandam mass spectrometry

To support the pharmacokinetic study of sulfadoxine (SD) and pyrimethamine (PM) in pregnant women and children, sensitive methods with small sample volume are desirable. Here we report a method to determine SD and PM with microvolume plasma samples: 5 µL plasma samples were cleaned up by protein precipitation with acetonitrile. The deuterated analytes were used as the internal standards. The samples after cleanup were injected onto an ACE Excel SuperC18 column (50 × 2.1 mm, 1.7 μm, Hichrom Limited) connected to a Waters I class UPLC coupled with a Sciex Triple Quad 6500+ Mass Spectrometer and eluted with water and acetonitrile both containing 0.1% formic acid in a gradient mode at 0.8mL/min. Detection utilized ESI+ as the ion source and MRM as the quantification mode. The precursor-to-product ion transitions m/z 311→245 for SD and 249→233 for PM were selected for quantification. The ion transitions for the corresponding internal standards were 315→249 for SD-d4 and 254→235 for PM-d3. The simplest linear regression weighted by 1/x was used for the calibration curves. The calibration ranges were 1-200 µg/mL SD and 2 - 1000ng/mL PM. The mean (± standard deviation) recoveries were 94.3±3.2% (SD) and 97.0±1.5% (PM). The validated method was applied to analysis of 1719 clinical samples, demonstrating the method is suitable for the pharmacokinetic study with samples collected up to day 28 post-dose.

Clinical needs assessment to inform development of a new assay to detect antimalarial drugs in patient samples: A case study

Point-of-care assays have greatly increased access to diagnostic information and improved healthcare outcomes globally, especially in the case of tropical diseases in rural settings. Increased recognition of the impact of these tools and increased funding, along with advances in technology have led to a surge in development of new assays. However, many new tools fail to fulfill their intended purpose due to a lack of clinical impact, operational feasibility, and input from envisioned operators. To be successful, they must fit into existing clinical decision-making models and be designed in collaboration with end users. We describe a case study of the development of a new low-cost sensor for antimalarial drugs, from initial planning through collection and incorporation of design feedback to final assay design. The assay uses an aptamer-based sensor to detect antimalarial drugs from patient samples for tracking antimalarial use in Southeast Asia, a region with a long history of emerging antimalarial drug resistance. Design and use-case input was collected from malaria control experts, researchers, and healthcare workers to develop target product profiles. Data was collected via surveys and in-person interviews during assay development and ultimately informed a change in assay format. This aptamer sensor platform can be easily adapted to detect other small molecule and protein targets and the design process described here can serve as a model for the development of effective new assays to improve access to healthcare technology.

The assessment of antimalarial drug efficacy in vivo

Currently recommended methods of assessing the efficacy of uncomplicated falciparum malaria treatment work less well in high-transmission than in low-transmission settings. There is also uncertainty how to assess intermittent preventive therapies and seasonal malaria chemoprevention (SMC), and Plasmodium vivax radical cure. A pharmacometric antimalarial resistance monitoring (PARM) approach is proposed specifically for evaluating slowly eliminated antimalarial drugs in areas of high transmission. In PARM antimalarial drug concentrations at recurrent parasitaemia are measured to identify outliers (i.e., recurrent parasitaemias in the presence of normally suppressive drug concentrations) and to evaluate changes over time. PARM requires characterization of pharmacometric profiles but should be simpler and more sensitive than current molecular genotyping-based methodologies. PARM does not require parasite genotyping and can be applied to the assessment of both prevention and treatment.

Determination of antimalarial drugs in pharmaceutical formulations and human blood by liquid chromatography: a review

Malaria is a life-threatening disease being treated by oral medication. This is the best treatment to reduce morbidity and mortality, prevent disease progression to the most severe form, lower the transmission of the disease and hinder the appearance of strains resistant to antimalarials. According to the World Health Organization, the most common antimalarial drugs are chloroquine, primaquine, mefloquine, lumefantrine, artemether, and artesunate in single dosage forms or fixed-dose combination. Within this context, the present review aims to show the evolution of different analytical methods that have been applied to the determination of these antimalarial drugs in pharmaceutical formulations and human blood by liquid chromatography in the last 10 years, along with statistical analyses of the methods.

Structure-switching aptamer sensors for the specific detection of piperaquine and mefloquine

Tracking antimalarial drug use and efficacy is essential for monitoring the current spread of antimalarial drug resistance. However, available methods for determining tablet quality and patient drug use are often inaccessible, requiring well-equipped laboratories capable of performing liquid chromatography-mass spectrometry (LC-MS). Here, we report the development of aptamer-based fluorescent sensors for the rapid, specific detection of the antimalarial compounds piperaquine and mefloquine-two slow-clearing partner drugs in current first-line artemisinin-based combination therapies (ACTs). Highly selective DNA aptamers were identified that bind piperaquine and mefloquine with dissociation constants (K _d's) measured in the low nanomolar range via two independent methods. The aptamers were isolated from a library of single-stranded DNA molecules using a capture-systematic evolution of ligands by exponential enrichment (SELEX) technique and then adapted into structure-switching aptamer fluorescent sensors. Sensor performance was optimized for the detection of drug from human serum and crushed tablets, resulting in two sensing platforms. The patient sample platform was validated against an LC-MS standard drug detection method in samples from healthy volunteers and patients with malaria. This assay provides a rapid and inexpensive method for tracking antimalarial drug use and quality for the containment and study of parasite resistance, a major priority for malaria elimination campaigns. This sensor platform allows for flexibility of sample matrix and can be easily adapted to detect other small-molecule drugs.

Quantitative determination of the antimalarials artemether and lumefantrine in biological samples: A review

Malaria is a worldwide health issue, with 216 million cases reported in 2016. Due to the widespread resistance of Plasmodium falciparum to conventional drugs, the first line treatment recommended by World Health Organization for uncomplicated malaria is artemisinin-based combined therapy (ACT), which combines two drugs with different mechanisms of action. The association of artemether and lumefantrine is the most common ACT used in the clinical practice. However, there have been reports of clinical artemisinin and derivatives partial resistance, which is defined as delayed parasite clearance. In this context, the monitoring of drug concentration in biological matrices is essential to evaluate treatment response, the need of dose adjustment and the occurrence of dose dependent adverse effects. Furthermore, it is also important for pharmacokinetic studies and in the development of generic and similar drugs. Determination of antimalarial drugs in biological matrices requires a sample pre-treatment, which involves drug extraction from the matrix and analyte concentration. The most used techniques are protein precipitation (PP), liquid-liquid extraction (LLE) and solid phase extraction (SPE). Subsequently, a liquid chromatography step is usually applied to separate interferences that could be extracted along with the analyte. Finally, the analytes are detected employing techniques that must be selective and sensitive, since the analyte might be present in trace levels. The most used approach for detection is tandem mass spectrometry (MS-MS), but ultraviolet (UV) is also employed in several studies. In this article, a review of the scientific peer-review literature dealing with validated quantitative analysis of artemether and/or lumefantrine in biological matrices, from 2000 to 2018, is presented.

LC-MS/MS method for the simultaneous analysis of seven antimalarials and two active metabolites in dried blood spots for applications in field trials: Analytical and clinical validation

In epidemiological studies, antimalarials measurements in blood represent the best available marker of drugs exposure at population level, an important driver for the emergence of drug resistance. We have developed a liquid chromatography-tandem mass spectrometry method (LC-MS/MS) for the simultaneous quantification of 7 frequently used antimalarials (amodiaquine, chloroquine, quinine, sulfadoxine, pyrimethamine, mefloquine, lumefantrine) and 2 active metabolites (N-desethyl-amodiaquine, desbutyl-lumefantrine) in 10-μl dried blood spots (DBS). This sampling approach is suitable for field studies wherein blood samples processing, transportation and storage are problematic. Sample preparation included extraction from a 3 mm-disk punched out of the DBS with 100-μl of methanol + 1% formic acid containing deuterated internal standards for all drugs. Good performances were achieved in terms of trueness (-12.1 to +11.1%), precision (1.4-15.0%) and sensitivity, with lower limits of quantification comprised between 2 ng/ml (sulfadoxine) and 20 ng/ml (chloroquine, quinine, pyrimethamine, mefloquine, lumefantrine and desbutyl-lumefantrine). All analytes were stable in DBS kept for 24 h at room temperature and at 37 °C. The developed assay was applied within the frame of a pharmacokinetic study including 16 healthy volunteers who received a single dose of artemether-lumefantrine. Lumefantrine concentrations in plasma and in DBS were highly correlated (R = 0.97) at all time points, confirming the assumption that lumefantrine concentrations determined in DBS confidently reflect blood concentrations. The blood/plasma ratio of 0.56 obtained using the Bland-Altman approach (and corresponding to the slope of the linear regression) is in line with very low penetration of lumefantrine into red blood cells. This sensitive multiplex LC-MS/MS assay enabling the simultaneous analysis of antimalarials in DBS is suitable for epidemiological studies in field conditions.

Development and validation of ultrafast LC-MS/MS method for quantification of anti-influenza agent camphecene in whole rat blood using dried blood spots and its application to pharmacokinetic studies

A fast, selective and sensitive procedure for quantitation of the camphor-based anti-influenza agent camphecene in whole rat blood was developed and validated using dried blood spots and LC-MS/MS. The method was validated according to recommendations of the FDA and EMA in terms of selectivity, linearity, accuracy, precision, recovery, matrix factor, stability, and carry-over. Sample preparation included spotting 20μL of whole blood taken from the tail vein onto the paper, drying and extracting the analyte, followed by evaporation of the solvent and analysis of the residue. HPLC separations were run on a reversed-phase microcolumn; the time of analysis was less than 2min. MS/MS detection was performed on a triple quadrupole mass-spectrometer using multiple reaction monitoring (MRM) mode. Transitions 196.4→122.2/153.3 and 152.2→93.1/107.2 were monitored for camphecene and 2-adamantylamine hydrochloride (internal standard), respectively. The intra- and inter-day precisions and accuracies, matrix factor, carry-over and recovery were within acceptable limits. Despite low extraction recovery (less than 2%), the sensitivity of the method was enough to detect the analyte in the concentration range 50-2500ng/mL. The application of the method was shown in pharmacokinetic studies of camphecene in rats at a dose of 10mg/kg.

Innovations in health and demographic surveillance systems to establish the causal impacts of HIV policies

PURPOSE OF REVIEW

Health and demographic surveillance systems (HDSS), in conjunction with HIV treatment cohorts, have made important contributions to our understanding of the impact of HIV treatment and treatment-related interventions in sub-Saharan Africa. The purpose of this review is to describe and discuss innovations in data collection and data linkage that will create new opportunities to establish the impacts of HIV treatment, as well as policies affecting the treatment cascade, on population health and economic and social outcomes.

RECENT FINDINGS

Novel approaches to routine collection of biomarkers, behavioural data, spatial data, social network information, migration events and mobile phone records can significantly strengthen the potential of HDSS to generate exposure and outcome data for causal analysis of HIV treatment impact and policies affecting the HIV treatment cascade. Additionally, by linking HDSS data to health service administration, education and welfare service records, researchers can substantially broaden opportunities to establish how HIV treatment affects health and economic outcomes when delivered through public sector health systems and at scale.

SUMMARY

As the HIV treatment scaleup in sub-Saharan Africa enters its second decade, it is becoming increasingly important to understand the long-term causal impacts of large-scale HIV treatment and related policies on broader population health outcomes, such as noncommunicable diseases, as well as on economic and social outcomes, such as family welfare and children's educational attainment. By collecting novel data and linking existing data to public sector records, HDSS can create near-unique opportunities to contribute to this research agenda.

The use of mass spectrometry to analyze dried blood spots

Dried blood spots (DBS) typically consist in the deposition of small volumes of capillary blood onto dedicated paper cards. Comparatively to whole blood or plasma samples, their benefits rely in the fact that sample collection is easier and that logistic aspects related to sample storage and shipment can be relatively limited, respectively, without the need of a refrigerator or dry ice. Originally, this approach has been developed in the sixties to support the analysis of phenylalanine for the detection of phenylketonuria in newborns using bacterial inhibition test. In the nineties tandem mass spectrometry was established as the detection technique for phenylalanine and tyrosine. DBS became rapidly recognized for their clinical value: they were widely implemented in pediatric settings with mass spectrometric detection, and were closely associated to the debut of newborn screening (NBS) programs, as a part of public health policies. Since then, sample collection on paper cards has been explored with various analytical techniques in other areas more or less successfully regarding large-scale applications. Moreover, in the last 5 years a regain of interest for DBS was observed and originated from the bioanalytical community to support drug development (e.g., PK studies) or therapeutic drug monitoring mainly. Those recent applications were essentially driven by improved sensitivity of triple quadrupole mass spectrometers. This review presents an overall view of all instrumental and methodological developments for DBS analysis with mass spectrometric detection, with and without separation techniques. A general introduction to DBS will describe their advantages and historical aspects of their emergence. A second section will focus on blood collection, with a strong emphasis on specific parameters that can impact quantitative analysis, including chromatographic effects, hematocrit effects, blood effects, and analyte stability. A third part of the review is dedicated to sample preparation and will consider off-line and on-line extractions; in particular, instrumental designs that have been developed so far for DBS extraction will be detailed. Flow injection analysis and applications will be discussed in section IV. The application of surface analysis mass spectrometry (DESI, paper spray, DART, APTDCI, MALDI, LDTD-APCI, and ICP) to DBS is described in section V, while applications based on separation techniques (e.g., liquid or gas chromatography) are presented in section VI. To conclude this review, the current status of DBS analysis is summarized, and future perspectives are provided.

Dried blood spot analysis to assess medication adherence and to inform personalization of treatment

Little research using dried blood spot samples to assess adherence to medication has been reported. The World Health Organisation estimates that only half of the patients in the developed world take their medication as prescribed. Additional costs to the healthcare provider include wasted medicines, avoidable additional hospital visits and non-optimum patient care. There is little evidence of information concerning medication adherence being made available to inform clinical decision making. In this article we explore the potential of the dried blood spot sample collection methodology as a means of identifying medication adherence to facilitate medicines optimization for a range of disparate diseases. Furthermore, the opportunity to personalize healthcare for different patients by assessing the clinically necessary therapeutic level of the relevant drugs is highlighted.

Procedures and practices for the validation of bioanalytical methods using dried blood spots: a review

Dried blood spot (DBS) sampling, the collection of whole blood samples on paper, is an emerging technique used for bioanalytical methods. Several analytical challenges, such as possible effects of spotting volume, hematocrit and spot inhomogeneity are identified for these methods, however, no regulatory-based guidelines for the specific validation of DBS-based assays are available hitherto. To date, 68 validation reports concerning methods for the quantitative determination of drugs in human DBS could be traced in the literature, with large differences in the extensiveness of the reported validations. This review aims to present an overview of these published validations. Additionally, the different challenges of DBS-based assays are discussed and recommendations on how to perform validation tests addressing these challenges are provided.

Current and future use of "dried blood spot" analyses in clinical chemistry

The analysis of blood spotted and dried on a matrix (i.e., "dried blood spot" or DBS) has been used since the 1960s in clinical chemistry; mostly for neonatal screening. Since then, many clinical analytes, including nucleic acids, small molecules and lipids, have been successfully measured using DBS. Although this pre-analytical approach represents an interesting alternative to classical venous blood sampling, its routine use is limited. Here, we review the application of DBS technology in clinical chemistry, and evaluate its future role supported by new analytical methods such as mass spectrometry.

Dried blood spots in bioanalysis of antimalarials: relevance and challenges in quantitative assessment of antimalarial drugs

Malaria is the leading parasitic disease in emerging countries. Therapeutic drug monitoring of antimalarial drugs is becoming increasingly important due to their spreading resistance. Measuring systemic antimalarial drug concentrations is also vital for safety and PK evaluations during clinical development. The dried blood spot (DBS) technique is a convenient alternative sample-collection method to venipuncture, especially in resource -limited areas where the clinical studies of antimalarials are usually carried out. Various bioanalytical methods for antimalarial drug estimation utilizing DBS sampling have been reported. This review discusses the applicability and relevance of DBS in quantitative assessment of antimalarial drugs, the advantages and drawbacks of DBS, and the difficulties encountered during its implementation.

Evaluation of the efficacy of chloroquine chemoprophylaxis for vivax malaria among Republic of Korea military personnel

Chloroquine has been used massively for vivax malaria prophylaxis and treatment in the Republic of Korea (ROK) military personnel from 1997. Although prophylaxis is generally regarded as successful among ROK military, prophylaxis failure has been repeatedly reported. Before the prophylaxis program was started on July 4th 2011, which was completed on October 16th 2011, by the ROK military, more than 60% of malaria cases were attributed to new infection or long-latency relapse. During the prophylaxis program, the authors re-examined the efficiency of chloroquine chemoprophylaxis in ROK military during the last 6 months of 2011 by measuring compliance and whole blood chloroquine levels in 41 malaria patients immediately before instituting antimalarial therapy between July and December. Three patients (7.3%) showed good compliance, and had whole blood total chloroquine levels above the minimally inhibitory concentration (100 ng/mL). However, 28 (69.3%) of these 41 patients when admitted to hospital showed poor or no compliance with prophylaxis; 4 of the 28 (14.3%) were stationed outside the mass prophylaxis region, and 5 (17.9%) subjects were infected after the prophylaxis program had finished. These findings indicate that the current malaria control program should be carefully reconsidered, in terms of, individual instruction, current chemoprophylaxis program regimens, and schedules to improve the efficacy of prophylaxis in the ROK military.

Rapid LC–MS/MS quantification of the major benzodiazepines and their metabolites on dried blood spots using a simple and cost-effective sample pretreatment

Background: Dried blood spots (DBS) sampling has gained popularity in the bioanalytical community as an alternative to conventional plasma sampling, as it provides numerous benefits in terms of sample collection and logistics. The aim of this work was to show that these advantages can be coupled with a simple and cost-effective sample pretreatment, with subsequent rapid LC–MS/MS analysis for quantitation of 15 benzodiazepines, six metabolites and three Z-drugs. For this purpose, a simplified offline procedure was developed that consisted of letting a 5-µl DBS infuse directly into 100 µl of MeOH, in a conventional LC vial. Results: The parameters related to the DBS pretreatment, such as extraction time or internal standard addition, were investigated and optimized, demonstrating that passive infusion in a regular LC vial was sufficient to quantitatively extract the analytes of interest. The method was validated according to international criteria in the therapeutic concentration ranges of the selected compounds. Conclusion: The presented strategy proved to be efficient for the rapid analysis of the selected drugs. Indeed, the offline sample preparation was reduced to a minimum, using a small amount of organic solvent and consumables, without affecting the accuracy of the method. Thus, this approach enables simple and rapid DBS analysis, even when using a non-DBS-dedicated autosampler, while lowering the costs and environmental impact.

A high performance liquid chromatographic assay of mefloquine in saliva after a single oral dose in healthy adult Africans

Background

Mefloquine-artesunate is a formulation of artemisinin based combination therapy (ACT) recommended by the World Health Organization and historically the first ACT used clinically. The use of ACT demands constant monitoring of therapeutic efficacies and drug levels, in order to ensure that optimum drug exposure is achieved and detect reduced susceptibility to these drugs. Quantification of anti-malarial drugs in biological fluids other than blood would provide a more readily applicable method of therapeutic drug monitoring in developing endemic countries. Efforts in this study were devoted to the development of a simple, field applicable, non-invasive method for assay of mefloquine in saliva.

Methods

A high performance liquid chromatographic method with UV detection at 220 nm for assaying mefloquine in saliva was developed and validated by comparing mefloquine concentrations in saliva and plasma samples from four healthy volunteers who received single oral dose of mefloquine. Verapamil was used as internal standard. Chromatographic separation was achieved using a Hypersil ODS column.

Results

Extraction recoveries of mefloquine in plasma or saliva were 76-86% or 83-93% respectively. Limit of quantification of mefloquine was 20 ng/ml. Agreement between salivary and plasma mefloquine concentrations was satisfactory (r = 0.88, p < 0.001). Saliva:plasma concentrations ratio was 0.42.

Conclusion

Disposition of mefloquine in saliva paralleled that in plasma, making salivary quantification of mefloquine potentially useful in therapeutic drug monitoring.

Determination of tafenoquine in dried blood spots and plasma using LC and fluorescence detection

BACKGROUND

The growing problem of parasites developing resistance to the traditional antimalarial drugs makes the development of new effective and safe drugs crucial. Tafenoquine is a new promising antimalarial drug for prophylaxis and treatment.

RESULTS

A bioanalytical method for the determination of tafenoquine in 100 µl of capillary blood applied onto sampling paper and in 100 µl of plasma has been developed and validated. The Whatman 31 ET Chr paper was treated with 0.6 mol/l tartaric acid to improve the extraction recovery and solid-phase extraction was used for cleanup procedure of the blood samples. Plasma samples were precipitated with methanol. Tafenoquine and internal standard were separated on a Zorbax SB-CN column by reversed-phase LC and detected with fluorescence detection at 262 and 470 nm. The within- and between-day variations were below 10 and 14%, respectively, over the range 50-200 nmol/l for capillary blood on sampling paper and below 6 and 10% for plasma samples. The LLOQ of the method was 50 nmol/l.

CONCLUSION

The developed method has adequate sensitivity and is highly suitable for clinical studies in dried blood spots and plasma.