Green bioanalytical sample preparation: fabric phase sorptive extraction

Fabric phase sorptive extraction (FPSE) is a recently introduced sample preparation technique that has attracted substantial interest of the scientific community dealing with bioanalysis. This technique is based on a permeable and flexible substrate made of fabric, coated with a sol-gel organic-inorganic sorbent. Among the benefits of FPSE are its tunable selectivity, adjustable porosity, minimized sample preparation workflow, substantially reduced organic solvent consumption, rapid extraction kinetics and superior extraction efficiency, many of which are well-known criteria for Green Analytical Chemistry. As such, FPSE has established itself as a leading green sample preparation technology of 21st century. In this review, we discuss the principal steps for the development of an FPSE method, the main method optimization strategies, as well as the applications of FPSE in bioanalysis for the extraction of a wide range of analytes (e.g., estrogens, benzodiazepines, androgens and progestogens, penicillins, anti-inflammatory drugs, parabens etc.).

Preparation of amine-modified lignin and its applicability toward online micro-solid phase extraction of valsartan and losartan in urine samples

In the present work, with the focus on an environmentally-friendly approach, some gels were prepared by synthesizing amine-modified lignin, extracted from sugarcane bagasse, and further esterification and subsequent freeze-drying. These lignin-based gels were implemented as extractive phases in an online micro-solid phase extraction (μSPE) setup in conjunction with high performance liquid chromatography (HPLC) with UV detector. The developed method was used for analytical determination of valsartan and losartan in urine samples. To study the effect of the functionalization process, the efficiency of the unmodified lignin and the functionalized lignin were compared both in the absence and the presence of graphene oxide (GO), presumably as a suitable doping agent. Surprisingly, higher extraction efficiency for the functionalized lignin, compared to both unmodified lignin and GO was observed. The amination process for the prepared gel was analyzed and proved by CHNS elemental analysis and Fourier transform infrared (FT-IR) spectroscopy. The morphology of sorbet was investigated via scanning electron microscope (SEM) imaging and a nanoscale cauliflower feature was observed. The method was optimized and subsequently applied to the analysis of the urine samples. Limits of detection (LOD) of 8 and 6 µg L ^- 1, limits of quantification (LOQ) of 27 and 20 µg L ^- 1 and linear dynamic range (LDR) of 27-2000 and 20-2000 µg L ^- 1 with intraday relative standard deviations (RSD%) of 4 and 3% were obtained for valsartan and losartan, respectively. The whole online μSPE-HPLC setup was conveniently used for the analysis of a patient urine sample and a quantity of 352 μg L ^- 1 of losartan was found. Acceptable relative recoveries (109-108 and 95-94% for valsartan and losartan) revealed the analytical potential of the method for the determination of drugs in complex urine samples.

Feasibility of cationic carbosilane dendrimers for sustainable protein sample preparation

Protein sample preparation is the bottleneck in the analysis of proteins. The aim of this work is to evaluate the feasibility of carbosilane dendrimers functionalized with cationic groups to make easier this step. Anionic carbosilane dendrimers (sulphonate- and carboxylate-terminated) have already demonstrated their interaction with proteins and their potential in protein sample preparation. In this work, interactions between positively charged carbosilane dendrimers and different model proteins were studied when working under different pH conditions, dendrimer concentrations, and dendrimer generations. Amino- and trimethylammonium-terminated carbosilane dendrimers presented, in some cases, weak interactions with proteins. Unlike them, carbosilane dendrimers with terminal dimethylamino groups could interact, in many cases, with proteins and these interactions were affected by the pH, the dendrimer concentration, and the dendrimer generation. Moreover, dendrimer precipitation was observed at all pHs, although just second and fourth generation (2 G and 4 G) dendrimers resulted in the formation of complexes with proteins. Under experimental conditions promoting dendrimer-protein interactions, 2 G dimethylamino-terminated dendrimers were proposed as an alternative to other methods used in analytical chemistry or analysis in which an organic solvent or a resin are required to enrich/purify proteins in a complex sample.

Rapid and accurate quantification of amphetamine and methamphetamine in human urine by antibody decorated magnetite nanoparticles coupled with matrix-assisted laser desorption ionization time-of-flight mass spectrometer analysis

In this study, a novel method for the simultaneous determination and accurate quantification of abused drugs in human urine was developed. Antibody conjugated boronic acid modified magnetite nanoparticles (Fe₃O₄, MNPs) were prepared for the selectively purification of illicit drugs in combination with high resolution matrix-assisted laser desorption ionization time-of-flight mass spectrometer (MALDI-TOF MS) analysis. Illicit drugs, amphetamine (AM) and methamphetamine (MA), were used as model analytes to demonstrate the feasibility of our strategy. Boronic acid functionalized MNPs were first prepared via one-pot synthesis to simplify and improve the efficiency of a chemical reaction. Anti-amphetamine antibody (anti-AM antibody) and anti-methamphetamine antibody (anti-MA antibody) was conjugated onto boronic acid modified MNPs, respectively, through the formation of boronate ester bond that could maintain the correct orientation to maximally capture their antigens. The capacity of antibody conjugation to boronic acid modified MNPs was at least 24 μg antibody/mg MNPs. Antibody-conjugated MNPs were designed to specifically capture AM and MA in human urine samples, both of which can be directly eluted to MALDI target plate by adding MALDI CHCA matrix solution for the following MALDI-MS analysis. The linear range of detection of the proposed method were 25-400 ng/mL and 25-1000 ng/mL with coefficients of determination between 0.9923 and 0.9997 for AM and MA, respectively. The lowest detectable concentrations of AM and MA were 1.87 and 3.75 ng/mL, respectively. More importantly, the proposed method allows rapid and accurate quantification of AM and MA from three suspects' urine samples. The obtained results are consistent with traditional GC/MS analysis. Antibody-conjugated MNPs could thus prove to be powerful tools for important applications such as forensic science, food safety and clinical diagnosis of disease.

Determination of urinary 5-hydroxyindoleacetic acid by combining Dμ-SPE using carbon coated TiO2 nanotubes and LC–MS/MS

Background: In this article, carbon coated titanium dioxide nanotubes (TiO2-NT@C) are employed for the determination of 5-hydroxyindole-3-acetic acid in urine by LC–MS/MS. Results: All the variables involved in the extraction have been studied and optimized in depth. The method has been analytically characterized on the basis of its linearity, accuracy, sensitivity and precision. The LOD is 155.8 μg/l while the repeatability and the reproducibility, expressed as RSD, are better than 5.42 and 5.25%, respectively. The obtained relative recovery is 115%. Conclusion: TiO2-NT@C permit the efficient extraction of 5-hydroxyindole-3-acetic acid from complex biological samples such as urine allowing its sensitive determination by LC–MS/MS.

Microextraction with phases containing nanoparticles

In this article, the state of the art of microextraction techniques that involve nanoparticles or nanomaterials (NPs) is reviewed, with special emphasis on the applications described in the biomedical field. The uses and advantages of the different types of NPs such as carbon nanotubes (either single- and multi-walled) and other carbon-based materials, metallic NPs, including gold, silver and magnetic NPs, and silica NPs are summarized. The main strategies used to modify the selectivity, extractive capacity and/or the stability of NPs through a chemical reaction are also reviewed. The potential advantages of NPs in different forms of off-line and on-line microextraction are discussed, and illustrative examples of application in the biomedical field are shown.

Polymer–nanoparticles composites in bioanalytical sample preparation

The term composite refers to a class of synthetic materials made from different constituents which exhibit final properties which are different from those of the individual components. Composites have been extensively used in the sample treatment context as sorbents since the resulting solid presents better extraction efficiency. In this realm, polymeric nanocomposites are raised as a powerful alternative. They can be tailored-synthesized for selectivity enhancement or include a magnetic core to simplify the extraction/elution process. This review article points out the relevance of such nanomaterials in bioanalysis. Several synergic combinations of nanoparticles (magnetic, carbon-based) as well as polymeric coatings (conventional, conductive or molecularly imprinted) are commented on. Finally, the potential of biopolymers in the microextraction field is briefly highlighted.

Picking vanished proteins from the void: how to collect and ship/share extremely dilute proteins in a reproducible and highly efficient manner

Successful proteome analyses of highly dilute samples are strongly dependent on optimized workflows considering especially sample preparation prior to highly sensitive mass spectrometric analysis. Various methods are available for enrichment of proteome samples, each characterized by specific advantages and disadvantages limiting their general application as a method of choice. Here we suggest an optimized universal protocol ensuring reproducibility and effective enrichment of dilute samples by commercial affinity beads. By comparably assessing the performance of the new protocol with selected standard enrichment techniques, we show the seamless application of the enrichment in common mass spectrometry based proteomic workflows. Further, novel applications are suggested including a facile storage and shipping of desiccated, trapped proteome samples at ambient temperatures and usage of the affinity beads for gel-free proteomic approaches.

Biological sample preparation: attempts on productivity increasing in bioanalysis

Sample preparation is an important step of any biomedical analysis. Development and validation of fast, reproducible and reliable sample preparation methods would be very helpful in increasing productivity. Except for a few direct injection methods, almost all biological samples should at least be diluted before any analysis. Sometimes dilution is not possible because of the low concentration of the target analyte in the sample, and alternative pretreatments, such as filtration, precipitation and sample clean up using different extraction methods, are needed. This review focuses on the recent achievements in the pretreatment of biological samples and investigates them in six categories (i.e., dilution, filtration/dialysis, precipitation, extraction [solid-phase extraction, liquid–liquid extraction], novel techniques [turbulent flow chromatography, immunoaffinity method, electromembrane extraction] and combined methods). Each category will be discussed according to its productivity rate and suitability for routine analysis, and the discussed methods will be compared according to the mentioned indices.

Hybridization of commercial polymeric microparticles and magnetic nanoparticles for the dispersive micro-solid phase extraction of nitroaromatic hydrocarbons from water

In this article, the combination of commercial polymeric microparticles (OASIS MCX) and cobalt ferrite nanoparticles is evaluated in dispersive micro-solid phase extraction (D-μSPE) for the determination of six nitroaromatic hydrocarbons in water. The high affinity of the polymeric material toward the target analytes as well as the magnetic behavior of cobalt ferrite nanoparticles are combined in a synergic way to developed an efficient and simple D-μSPE approach. The sorptive performance of the hybrid material is compared with that most usual sorbents and the effect of its synthesis steps on the extraction capability is also evaluated in depth. After the optimization of selected variables, D-μSPE method was assessed in terms of linearity, sensitivity, precision and accuracy. The new extraction method allows the determination of the target compounds with limits of detection in the range from 0.12 to 1.26 μg/L and relative standard deviations lower than 9.6%. The recovery study was performed in two different water samples obtaining percentages from 71 to 103%, which demonstrated the applicability of the hybrid sorbent for the selected analytical problem.