Prospecting candidate SNPs for backfat in Canchim beef cattle

Genetic parameters, genomic prediction, and identification of regulatory regions located on chromosome 14 for weight traits in Nellore cattle

This study aimed to investigate functional variants in chromosome 14 (BTA14) and its impact in genomic selection for birth weight (BW), weaning weight (WW), and yearling weight (YW) in Nellore cattle. Genetic parameter estimation and the weighted single-step genomic best linear unbiased prediction (WssGBLUP) analyses were performed. Direct additive heritability estimates were high for WW and YW, and moderate for BW. Trait-associated variants distributed across multiple regions on BTA14 were observed in the weighted single-step genome-wide association studies (WssGWAS) results, implying a polygenic genetic architecture for weight in different ages. Several genes have been found in association with the weight traits, including the CUB And Sushi multiple domains 3 (CSMD3), thyroglobulin (TG), and diacylglycerol O-acyltransferase 1 (DGAT1) genes. The variance explained per SNP was higher in six functional classes of gene regulatory regions (5UTR, CpG islands, downstream, upstream, long non-coding RNA, and transcription factor binding sites (TFBS)), highlighting their importance for weight traits in Nellore cattle. A marginal increase in accuracy was observed when the selected functional variants (SV) information was considered in the WssGBLUP method, probably because of the small number of SV available on BTA14. The identified genes, pathways, and functions contribute to a better understanding of the genetic and physiological mechanisms regulating weight traits in the Nellore breed.

Identification of potential biomarkers associated with meat tenderness in Hanwoo (Korean cattle): An expression quantitative trait loci analysis

Meat tenderness is considered the most important trait contributing to beef quality, level of consumer satisfaction, willingness to pay premium prices and industry profit. Genomic selection method would be helpful for genetic improvement of traits with low heritability and that are difficult to measure. The identification of core genes can aid genomic selection for complex traits with low heritability that are difficult to measure. We performed statistical analysis of associations between longissimus dorsi muscle tenderness and gene expression in 20 Hanwoo cattle, using Warner-Bratzler shear force and RNAseq data, respectively. We found a total of 166 core genes, from which six (ASAP1, CAPN5, ELN, SUMF2, TTC8 and MGAT4A) were regulated by 16 cis-expression quantitative trait loci (eQTL) SNPs. Notably, we found that a cis-eQTL SNP of the ELN gene contained an MFZ-1 binding site in its putative promoter region. These findings provide useful information for genomic prediction of beef tenderness in Hanwoo cattle.

Accuracy of genomic breeding values for meat tenderness in Polled Nellore cattle

Zebu () cattle, mostly of the Nellore breed, comprise more than 80% of the beef cattle in Brazil, given their tolerance of the tropical climate and high resistance to ectoparasites. Despite their advantages for production in tropical environments, zebu cattle tend to produce tougher meat than Bos taurus breeds. Traditional genetic selection to improve meat tenderness is constrained by the difficulty and cost of phenotypic evaluation for meat quality. Therefore, genomic selection may be the best strategy to improve meat quality traits. This study was performed to compare the accuracies of different Bayesian regression models in predicting molecular breeding values for meat tenderness in Polled Nellore cattle. The data set was composed of Warner-Bratzler shear force (WBSF) of longissimus muscle from 205, 141, and 81 animals slaughtered in 2005, 2010, and 2012, respectively, which were selected and mated so as to create extreme segregation for WBSF. The animals were genotyped with either the Illumina BovineHD (HD; 777,000 from 90 samples) chip or the GeneSeek Genomic Profiler (GGP Indicus HD; 77,000 from 337 samples). The quality controls of SNP were Hard-Weinberg Proportion -value ≥ 0.1%, minor allele frequency > 1%, and call rate > 90%. The FImpute program was used for imputation from the GGP Indicus HD chip to the HD chip. The effect of each SNP was estimated using ridge regression, least absolute shrinkage and selection operator (LASSO), Bayes A, Bayes B, and Bayes Cπ methods. Different numbers of SNP were used, with 1, 2, 3, 4, 5, 7, 10, 20, 40, 60, 80, or 100% of the markers preselected based on their significance test (-value from genomewide association studies [GWAS]) or randomly sampled. The prediction accuracy was assessed by the correlation between genomic breeding value and the observed WBSF phenotype, using a leave-one-out cross-validation methodology. The prediction accuracies using all markers were all very similar for all models, ranging from 0.22 (Bayes Cπ) to 0.25 (Bayes B). When preselecting SNP based on GWAS results, the highest correlation (0.27) between WBSF and the genomic breeding value was achieved using the Bayesian LASSO model with 15,030 (3%) markers. Although this study used relatively few animals, the design of the segregating population ensured wide genetic variability for meat tenderness, which was important to achieve acceptable accuracy of genomic prediction. Although all models showed similar levels of prediction accuracy, some small advantages were observed with the Bayes B approach when higher numbers of markers were preselected based on their -values resulting from a GWAS analysis.

Identification of genome-wide selection signatures in the Limousin beef cattle breed

The study is aimed at identifying selection footprints within the genome of Limousin cattle. With the use of Extended Haplotype Homozygosity test, supplemented with correction for variation in recombination rates across the genome, we created map of selection footprints and detected 173 significant (p < 0.01) core haplotypes being potentially under positive selection. Within these regions, a number of candidate genes associated inter alia with skeletal muscle growth (GDF15, BMP7, BMP4 and TGFB3) or postmortem proteolysis and meat maturation (CAPN1 and CAPN5) were annotated. Noticeable clusters of selection footprints were detected on chromosomes 1, 4, 8 and 14, which are known to carry several quantitative trait loci for growth traits and meat quality. The study provides information about the genes and metabolic pathways potentially modified under the influence of directional selection, aimed at improving beef production characteristics in Limousin cattle.

Identification of genomic regions associated with feed efficiency in Nelore cattle

Background

Feed efficiency is jointly determined by productivity and feed requirements, both of which are economically relevant traits in beef cattle production systems. The objective of this study was to identify genes/QTLs associated with components of feed efficiency in Nelore cattle using Illumina BovineHD BeadChip (770 k SNP) genotypes from 593 Nelore steers. The traits analyzed included: average daily gain (ADG), dry matter intake (DMI), feed-conversion ratio (FCR), feed efficiency (FE), residual feed intake (RFI), maintenance efficiency (ME), efficiency of gain (EG), partial efficiency of growth (PEG) and relative growth rate (RGR). The Bayes B analysis was completed with Gensel software parameterized to fit fewer markers than animals. Genomic windows containing all the SNP loci in each 1 Mb that accounted for more than 1.0% of genetic variance were considered as QTL region. Candidate genes within windows that explained more than 1% of genetic variance were selected by putative function based on DAVID and Gene Ontology.

Results

Thirty-six QTL (1-Mb SNP window) were identified on chromosomes 1, 2, 3, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 18, 19, 20, 21, 22, 24, 25 and 26 (UMD 3.1). The amount of genetic variance explained by individual QTL windows for feed efficiency traits ranged from 0.5% to 9.07%. Some of these QTL minimally overlapped with previously reported feed efficiency QTL for Bos taurus. The QTL regions described in this study harbor genes with biological functions related to metabolic processes, lipid and protein metabolism, generation of energy and growth. Among the positional candidate genes selected for feed efficiency are: HRH4, ALDH7A1, APOA2, LIN7C, CXADR, ADAM12 and MAP7.

Conclusions

Some genomic regions and some positional candidate genes reported in this study have not been previously reported for feed efficiency traits in Bos indicus. Comparison with published results indicates that different QTLs and genes may be involved in the control of feed efficiency traits in this Nelore cattle population, as compared to Bos taurus cattle.

Electronic supplementary material

The online version of this article (doi:10.1186/s12863-014-0100-0) contains supplementary material, which is available to authorized users.

Identification of selection signatures in livestock species

The identification of regions that have undergone selection is one of the principal goals of theoretical and applied evolutionary genetics. Such studies can also provide information about the evolutionary processes involved in shaping genomes, as well as physical and functional information about genes/genomic regions. Domestication followed by breed formation and selection schemes has allowed the formation of very diverse livestock breeds adapted to a wide variety of environments and with special characteristics. The advances in genomics in the last five years have enabled the development of several methods to detect selection signatures and have resulted in the publication of a considerable number of studies involving livestock species. The aims of this review are to describe the principal effects of natural/artificial selection on livestock genomes, to present the main methods used to detect selection signatures and to discuss some recent results in this area. This review should be useful also to research scientists working with wild animals/non-domesticated species and plant biologists working with breeding and evolutionary biology.

A multi-trait, meta-analysis for detecting pleiotropic polymorphisms for stature, fatness and reproduction in beef cattle

Polymorphisms that affect complex traits or quantitative trait loci (QTL) often affect multiple traits. We describe two novel methods (1) for finding single nucleotide polymorphisms (SNPs) significantly associated with one or more traits using a multi-trait, meta-analysis, and (2) for distinguishing between a single pleiotropic QTL and multiple linked QTL. The meta-analysis uses the effect of each SNP on each of n traits, estimated in single trait genome wide association studies (GWAS). These effects are expressed as a vector of signed t-values (t) and the error covariance matrix of these t values is approximated by the correlation matrix of t-values among the traits calculated across the SNP (V). Consequently, t'V⁻¹t is approximately distributed as a chi-squared with n degrees of freedom. An attractive feature of the meta-analysis is that it uses estimated effects of SNPs from single trait GWAS, so it can be applied to published data where individual records are not available. We demonstrate that the multi-trait method can be used to increase the power (numbers of SNPs validated in an independent population) of GWAS in a beef cattle data set including 10,191 animals genotyped for 729,068 SNPs with 32 traits recorded, including growth and reproduction traits. We can distinguish between a single pleiotropic QTL and multiple linked QTL because multiple SNPs tagging the same QTL show the same pattern of effects across traits. We confirm this finding by demonstrating that when one SNP is included in the statistical model the other SNPs have a non-significant effect. In the beef cattle data set, cluster analysis yielded four groups of QTL with similar patterns of effects across traits within a group. A linear index was used to validate SNPs having effects on multiple traits and to identify additional SNPs belonging to these four groups.

We describe novel methods for finding significant associations between a genome wide panel of SNPs and multiple complex traits, and further for distinguishing between genes with effects on multiple traits and multiple linked genes affecting different traits. The method uses a meta-analysis based on estimates of SNP effects from independent single trait genome wide association studies (GWAS). The method could therefore be widely used to combine already published GWAS results. The method was applied to 32 traits that describe growth, body composition, feed intake and reproduction in 10,191 beef cattle genotyped for approximately 700,000 SNP. The genes found to be associated with these traits can be arranged into 4 groups that differ in their pattern of effects and hence presumably in their physiological mechanism of action. For instance, one group of genes affects weight and fatness in the opposite direction and can be described as a group of genes affecting mature size, while another group affects weight and fatness in the same direction.

Genome-wide association study for backfat thickness in Canchim beef cattle using Random Forest approach

Background

Meat quality involves many traits, such as marbling, tenderness, juiciness, and backfat thickness, all of which require attention from livestock producers. Backfat thickness improvement by means of traditional selection techniques in Canchim beef cattle has been challenging due to its low heritability, and it is measured late in an animal’s life. Therefore, the implementation of new methodologies for identification of single nucleotide polymorphisms (SNPs) linked to backfat thickness are an important strategy for genetic improvement of carcass and meat quality.

Results

The set of SNPs identified by the random forest approach explained as much as 50% of the deregressed estimated breeding value (dEBV) variance associated with backfat thickness, and a small set of 5 SNPs were able to explain 34% of the dEBV for backfat thickness. Several quantitative trait loci (QTL) for fat-related traits were found in the surrounding areas of the SNPs, as well as many genes with roles in lipid metabolism.

Conclusions

These results provided a better understanding of the backfat deposition and regulation pathways, and can be considered a starting point for future implementation of a genomic selection program for backfat thickness in Canchim beef cattle.

Whole-genome analysis for backfat thickness in a tropically adapted, composite cattle breed from Brazil

Backfat thickness affects the preservation of the beef carcass after slaughter and confers organoleptic characteristics assessed by the consumer. One of the breeding goals for Canchim, a tropically adapted breed, is to comprehensively increase fat thickness. Our goals were to identify genomic regions associated with backfat in Canchim populations and validate the association of single nucleotide polymorphisms (SNPs) overlapping previously identified QTL regions known to affect fat deposition. Fifteen animals with lower and 15 animals with higher residues for backfat, according to a linear model using the SAS GLM procedure, were selected from a population of 1171 animals and genotyped using the BovineSNP50 BeadChip. Initial analysis revealed more than 100 SNPs that discriminated the tails of phenotypic distribution. One extended region of association included the centromeric region of chromosome (Chr) 14. Because this region overlapped with QTL from previous reports, we developed SNP assays to interrogate two linkage disequilibrium blocks, one in the centromeric region and another in the middle region of Chr 14 to confirm the association. The analysis validated the presence of specific haplotypes affecting fat thickness.