Disinclusion of unerupted teeth by mean of self-ligating brackets: effect of blood contamination on shear bond strength

Comparative Evaluation of Two Bracket Systems' Bond Strength: Conventional and Self-Ligating

Adhesion remains a key element in dentistry, whether approached in prosthetics, odontology, or orthodontics. It is a continuously researched aspect, as improved materials and adhesive methods keep emerging in the market. No orthodontic treatment can be effective without the proper adhesion strength of the bonded elements on the teeth. The objective of this research, in the broad context of self-ligating versus conventional brackets, was to compare active and passive self-ligating systems with a conventional one by conducting an in vitro study on human-extracted premolars. Shear bond strength tests were executed by means of an advanced materials-testing machine that generated maximum load and tensile strength values. The data obtained underwent statistical analysis with a statistical threshold of p < 0.05. The results regarding the statistical significance were acquired when comparing the passive self-ligating system with the active self-ligating and conventional systems (load-at-maximum-load mean 204.9, SD 91.09, and p < 0.05). In this study, the passive self-ligating bracket system appears to present increased shear bond strength.

Effects of miniscrew-facilitated micro-osteoperforations on the rate of orthodontic tooth movement : A split-mouth, randomized controlled trial

PURPOSE

The aim of the present split-mouth randomized controlled trial was to evaluate the effects of miniscrew-facilitated micro-osteoperforations (MOPs) on the rate of orthodontic tooth movement during canine retraction.

METHODS

A total of 20 young adult patients (mean age 16.5 years) with the indication for bilateral maxillary first premolar extraction were included in the study. The MOPs were randomly applied to either the right or left side of the mouth with miniscrews (1.5 mm width, 8 mm length) to the extraction area, 28 days apart. The canine distalization continued for 3 months. The closure of the extraction space was measured by using a digital analysis program on the pre- and postdigital study models for both the control and experiment sides.

RESULTS

The mean rate of extraction space closure on the MOP side was 2.51 ± 1.41 mm and on the control side was 2.88 ± 1.32 mm. There was no statistically significant difference between the groups (p > 0.05).

CONCLUSION

Overall, we found that MOPs did not significantly affect the rate of orthodontic tooth movement during canine retraction.

Influence of different acid etching times on the shear bond strength of brackets bonded to bovine enamel

Introduction

The most used product for surface acid conditioning for enamel is 37-40% phosphoric acid, which promotes greater mechanical retention.

Aim

The objective of this study was to compare the shear bond strength (SBS) of brackets bonded to bovine enamel with different acid conditioning protocols and to analyze the surface morphology.

Materials and methods

169 teeth (n = 13) were divided into 4 groups: control group without conditioning (G1), Dental Gel 37% phosphoric acid (Dentsply) (G2), Ultra Etch 35% (Ultradent) (G3) and Attaque gel 37% (Biodinâmica) (G4). Groups G2, G3 and G4 were subdivided according to the conditioning time into: 10 s (a), 15 s (b), 30 s (c) and 60 s (d). The superficial enamel morphology (n = 3) was analyzed using a scanning electron microscopy (SEM) to analyze the depth of the microporosities. The samples were submitted to the shear test (SBS) with the aid of a universal testing machine (INSTRON) with a speed of 1 mm/min. The enamel after debonding was analyzed to determine the adhesive remnant index (ARI) in a stereoscopic magnifying glass.

Statistical analysis used

The SBS data were analyzed using two-way ANOVA. ARI data were analyzed using generalized linear models and SEM measurements were analyzed using Kruskal Wallis and Dunn tests. The 95% significance level was used.

Results

The SBS within G2, G3 and G4 ranged from 11.11 to 12.66 MPa. ARI score 3 was observed in 35% of the samples. The samples analyzed in the SEM showed microporosity depth rangingfrom 1.28 to 2.48 μm.

Conclusions

There was no difference between the acids and times evaluated for SBS. The ARI analysis showed that the studied acids provide protection to the enamel surface, keeping the adhesive attached to the buccal surface after debonding. The increase in conditioning time is directly proportional to the deterioration of the prismatic and interprismatic content.

Enamel Surface Damage following Debonding of Ceramic Brackets: A Hospital-Based Study

Methods

The current study includes 80 extracted premolars of human from the patient visiting for orthodontic treatment of Coorg Institute of Dental Sciences, Karnataka, India. The brackets were debonded using four different methods. The enamel surface damage after the procedure was assessed with the Enamel Surface Index (ESI); similarly, the Adhesive Remnant Index (ARI) score was used to determine the adhesive residual deposit. Scanning electron microscopy (SEM) was used to visualize better microporosities and micromechanical retention of adhesive remnants on the enamel surface. The normality of the data was tested using the Kolmogorov–Smirnov test. Depending upon the normality test result, the one-way ANOVA test or Kruskal–Wallis test was used to test the mean ESI and mean ARI differences among different debonding methods along with the appropriate post hoc tests. The necessary ethical clearance was obtained from the Ethics Committee of the institute.

Results

The ultrasonic scaler (US) technique led to more significant enamel surface damage, with 13 (65%) samples in the ESI scores III and IV against the satisfactory surface in 2 (10%) samples with the ligature cutter (LC) technique (ESI-I) reflecting LC as a better technique. The ESI scores (III and IV) for debonding plier (DP) and thermal method (TM) reflected a higher value in 12 (60%) and 10 (50%) samples and caused more damage to the enamel surface as compared to the LC technique. The ARI score was highest (ARI-1 = 40%) with the LC technique, followed by the US (ARI-1 = 20%), TM (ARI-1 = 15%), and DP (ARI-1 = 5%) methods. We have observed a significant association (p value <0.05) of the ARI score among four different debonding ways in terms of each tooth's residual adhesive after the bracket removal.

Conclusion

The result establishes the LC technique as a more acceptable one as it causes minimal harm to the debonded surface. The adhesive left on the debonded area is also minimum as compared to the other three methods tested. Therefore, it can be suggested as an ideal method.

Universal Adhesive for Fixed Retainer Bonding: In Vitro Evaluation and Randomized Clinical Trial

This study aims to assess the efficacy of a universal adhesive (Scotchbond Universal, 3M ESPE) (SB) in total-etch mode, compared to a traditional orthodontic primer (Transbond XT Primer, 3M ESPE) (XT Primer), to perform bonding of orthodontic fixed retainers along with the Transbond XT Light Cure Adhesive Paste (3M ESPE). For the in vitro study, a round section wire (Ortosmail Krugg) was bonded using XT Primer for 20 bovine incisors (Group 1) and SB for other 20 (Group 2). Samples were debonded in a universal testing machine applying a tangential force to specimens (crosshead speed of 1 millimeter per minute). Shear bond strength (SBS) and adhesive remnant index (ARI) scores were calculated. For the in vivo study, 100 patients needing upper and lower canine-to-canine fixed retainers after orthodontic treatment were randomly assigned to two groups of 50 participants each, i.e., group 1 (retainer bonding with XT Primer) and group 2 (retainer bonding with SB). Over two years, examinations were carried out monthly, and detachments were registered by considering the teeth and arches affected. In vitro, no statistically significant differences in SBS and ARI scores were demonstrated between the two groups, both showing a mean bond strength of about 12 MPa and major frequency of ARI "2" (>50% remnant adhesive on the enamel). Conversely, a significantly lower failure rate over 2 years was assessed clinically for group 2 in both arches. Independently of the adhesive and arch, incisors reported a significantly higher failure rate than canines. Scotchbond Universal used in total-etch mode could be a valid alternative to the traditional orthodontic Transbond XT Primer.

A Comparative Study on the Effect of Different Methods of Recycling Orthodontic Brackets on Shear Bond Strength

Aim

The aim of this study was to evaluate and compare the effect of different methods of recycling stainless steel orthodontic brackets on shear bond strength.

Methods

One hundred twenty human premolars extracted for orthodontic purpose were randomly divided into four groups. Standard MBT (0.022″) brackets were bonded on the buccal surface of all samples with light cured adhesive primers using an LED curing unit for 10 seconds. Group I was assigned as control, and the brackets of Group II, Group III, and Group IV were subjected to recycling by flaming, flaming with sandblasting, and flaming with ultrasonic cleaning, respectively. The recycled brackets were rebonded, and final debonding of all brackets was performed using a universal testing machine at a crosshead speed of 0.5 mm/min and shear bond strength was determined. Data were analyzed with descriptive statistics, ANOVA, and post hoc tests. The adhesive remnant index was evaluated using a stereomicroscope at 10X magnification.

Results

The highest shear bond strength was obtained with Group I (10.35 ± 0.46 MPa), followed by Group III (9.36 ± 0.55 MPa) and Group IV (5.97 ± 0.66 MPa), and the least value was obtained with Group II (4.30 ± 0.55 Mpa). Significant differences among the groups were detected by analysis of variance. Tukey's post hoc multiple comparison test showed that the shear bond strength of each group was significantly different from one another (p < 0.001).

Conclusions

Shear bond strength of new brackets was significantly higher than that of the recycled brackets. Among recycled brackets, flaming with sandblasting provided adequate shear bond strength, flaming with ultrasonic cleaning provided a borderline value for clinical use, and flaming alone led to a significantly lower value.

Analysis of Root Canal Curvature and Root Canal Morphology of Maxillary Posterior Teeth in Guizhou, China

Background

We investigated the root canal curvature and morphology of maxillary posterior teeth in Guizhou, China, to provide references for clinical practice.

Material/Methods

We collected 274 maxillary posterior teeth in Guizhou Province, China. The root canal curvature was observed by X-ray film measurement. Two hundred teeth were selected to make transparent tooth models, and root canal configuration was recorded according to Vertucci classification criteria. The position of the MB2 root canal orifice and the mesiobuccal root canal configuration were observed by micro-computed tomographic (micro-CT) scanning. The t test and the chi-square test were used for statistical analysis.

Results

The root canals of the maxillary posterior teeth showed more significant curvature in the mesiodistal direction than in the buccolingual direction (P<0.05). The MB2 root canal of maxillary molars showed severe bending in the mesiodistal direction: 25.16±6.6 degrees and 28.05±8.65 degrees in first and second molars, respectively. The detection rate of MB2 was 48% in maxillary first molars and 32% in maxillary second molars. The results of micro-CT showed that the vertical distances between the MB2 and MB-P line were 0.64±0.34 mm and 0.57±0.28 mm in first and second molars, respectively.

Conclusions

The root canal morphology and curvature of maxillary posterior teeth varied greatly in the Guizhou population, which increases the difficulty of treatment. It is necessary for clinicians to gain understanding of the root canal and to improve the success rate of root canal therapy.

Orthodontic Treatment and Healthcare Goals: Evaluation of Multibrackets Treatment Results Using PAR Index (Peer Assessment Rating)

BACKGROUND

The evaluation of orthodontic treatment outcomes using an objective method is important in order to maintain high treatment quality and final healthcare of patients. It allows professionals and university students to raise the level of the therapy. The aim of this study was to assess the orthodontic treatment outcomes in an Italian postgraduate School of Orthodontics using Peer Assessment Rating (PAR) Index.

METHODS

A sample of 50 patients treated in a postgraduate program was randomly selected. PAR index was used to assess pre-treatment and post-treatment study casts by two different examiners. The influence of different variables such as gender, treatment method, and need for extraction was statistically analyzed.

RESULTS

The average numerical reduction of PAR between the beginning and the end of the treatment was 18.74 (CI 95% 16.53-20.95), while the percentage reduction was 94.8% (CI 95% 91.91-97.68). All cases improved: 8% of patients resulted in the improved category, while 92% of them were in the greatly improved group.

CONCLUSIONS

According to PAR index, the results showed that patients received a high-standard therapy. None of the factors studied influenced significantly the treatment outcomes.

Perceived Practitioner Barriers to the Management of Orofacial Pain in the Kingdom of Saudi Arabia: A Cross-sectional Study

Background:

Orofacial Pain (OFP) is a group of non-dental painful conditions affecting the oral cavity and facial area.

Objectives:

The objective of this study was to explore which barriers to manage the patient with chronic OFP as perceived by general dentists versus dental specialists and to investigate whether if professionals with degrees from their home country versus another country or number of years of professional experience differ in their perceptions.

Methods:

A closed-end questionnaire was hand-delivered to 600 participants [300 general dentists and 300 dental specialists] in four major provinces in Saudi Arabia. Demographic data were expressed as frequency. Proportional t-tests and chi-square tests were used to analyse intergroup differences. Statistical significance for all analyses was set at P-value < 0.05.

Results:

Overall, the response rate was 56.6% (340/600). Around two-thirds of the participants were general dentists (60.9%), while the remainder were dental specialists (39.1%). There was an obvious consensus by the participants that “Low payment/reimbursement” and “Lack of OFP knowledge” were among the most common barriers (85% and 83.5%, respectively). In contrast, “Legal risks” were the least frequently reported factor (38.8%). The most commonly reported barrier by general dentists was “Shortage of patients/lack of demand;” this was significantly different from the experience of dental specialists (87% vs. 72.2%; P- value < 0.01). In terms of the country of graduation or years of experience, there were no significant differences.

Conclusion:

The study demonstrates the existence of many significant barriers other than OFP knowledge, such as reimbursement, facility and demand that could present obstacles and challenges to the management of OFP by general dentists and dental specialists. Most participants believed that dentists should manage this condition and that OFP courses should be included in the dental school curriculum.

Mean Shearing Stroke Frequency of Orthodontic Brackets under Cycling Loading: An In Vitro Study

Based on the development of many adhesive systems and bonding techniques, bonding strength of orthodontic brackets has become even more important in modern clinical orthodontics. The aim of this study was to determine mean shearing stroke frequency of different orthodontic bracket types and bonding agents under cycling loading. Therefore, 10 different types of orthodontic bracket from 4 different brands were divided into 2 groups. Two different adhesives, namely Transbond™ XT etch-and-rinse for Group 1 and Transbond™ Plus self-etching-primer adhesive for Group 2 were considered. The brackets were tested under cycling loading force of 10-N and a crosshead speed of 300 mm/min and 40 cycle/min. The frequency of strokes that the brackets failed were determined and these data were analyzed by statistical analysis using an independent sample t-test and one-way analysis of variance (ANOVA). The level of significance was set at p < 0.05. Generally, differences between the frequency of shearing strokes of the bracket failures were found to be statistically significant depending on the type of adhesives and brackets (p < 0.05). The bonding technique for Group 1 was found to have a significantly higher shear bonding strength than Group 2. It is also seen that different types of bracket belonging to the same or different brands had different shear bonding strength. It may be concluded that: (i) all bracket types used in this study can be applied with both bonding techniques, (ii) in order to minimize the risk of hard tissue damage, ceramic brackets should be carefully bonded using the self-etching primary adhesive technique.

Evaluation of the Relationship Between Maxillary Sinus Wall and Maxillary Canines and Posterior Teeth Using Cone-Beam Computed Tomography

Background

The proximity between the maxillary sinus and dental roots may impede orthodontic tooth movement. This study aimed to explore the relationship between the maxillary sinus wall (MSW) and maxillary canines and posterior teeth using cone-beam computed tomography (CBCT).

Material/Methods

CBCT images (317) were examined for whether the mesial, distal, buccal, and palatal surfaces of the examined root contacted the MSW, and the contact distance of each root surface with the MSW was measured. The effects of age and sex were analyzed using logistic regression and linear regression analyses.

Results

The highest contact ratios with the MSW (ranging from 62.0% to 73.2%) were observed at the palatal root surfaces of the first molar mesiobuccal and distobuccal roots (1M MB and DB), the buccal root surface of the first molar palatal roots (1M P), and the mesial and buccal root surfaces of the second molars (2M), followed by the distal root surface of the second premolars (2PM) and the mesial root surfaces of the 1M MB and P (ranging from 49.2% to 59.3%). At these root surfaces, the contact ratios decreased with age (P<0.05), but the lowest still reached a range of 29.4% to 57.9% in the 30- to 47-year-old group.

Conclusions

The 2PM distal root surface, the 1M MB mesial and palatal root surfaces, the 1M DB palatal root surface, and the 1M P and 2M mesial and buccal root surfaces most frequently contacted the MSW. Clinicians should observe the contact of root surfaces with the MSW, even in aged patients.

Gomes MG, Amaral FLB, G. França FM, Basting RT, Bandeca MC, Diniz RS, Gonçalves LM, de J. Tavarez RR, Turssi CP. Aging Protocols and Their Effects on Bond Strength of Total-Etch and Self-Etch Adhesive Systems to Dentin

Objective:

This study investigated whether different aging protocols have effects on the bond strength of total-etch and self-etch adhesive systems to dentin substrate.

Methods:

Molars were sectioned exposing the dentin, which was submitted to restorative procedures using two-step total-etch (ASB, Adper SingleBond2), two-step self-etch (CLF, Clearfil SEBond), or one-step self-etch (OPT, Optibond All-in-One) system and resin composite. The obtained blocks were sectioned to result in sticks to be submitted to bond strength and failure mode tests after 24h storage in distilled water (DW), or 180-day aging protocols in DW, artificial saliva (AS), citric acid (CA), or thermal cycling (TC). The types of failures were classified as adhesive, cohesive in dentin, cohesive in composite resin, and mixed. Data were analyzed using ANOVA followed by Tukey’s test (α=5%). The failure modes were descriptive under the relative frequencies form.

Results:

It was observed that ASB presented the higher bond strength(p<0.05), while CLF and OPT did not demonstrate differences between them(p>0.05) after 24h. The bond strength obtained with ASB significantly overcame that of OPT when stored in DW or AS for 180 days (p<0.001). In these storing mediums, ASB did not differ from CLF(p>0.05), while in CA or TC the values of CLF were significantly lower (p<0.001). In TC aging, the values presented by OPT did not differ from ASB(p>0.05), both of which had higher values than CLF(p<0.05). The predominant failure mode was adhesive.

Conclusion:

For the two-step total-etch and two-step self-etch adhesives, the influence of aging in AS and TC was equivalent to that of storage in DW. The most deleterious effects occurred in CA, a situation in which self-etch adhesives displayed worse performance than the conventional type.

Photobiomodulation and Pain Reduction in Patients Requiring Orthodontic Band Application: Randomized Clinical Trial

PURPOSE

The aim of this study was to investigate the effect of Photobiomodulation (PBM) in managing orthodontic pain intensity over time in patients requiring band application on upper first molars.

METHODS

Maxillary first molars were banded. In the trial group, each molar received single-session PBM on two buccal and two palatal points (λ = 830 ± 10 nm; 150 mW, 7.5 J/cm2; spot of 0.1 cm2; 5 sec per point), while the control group received a placebo treatment. All patients were asked to answer five pain rating scales to assess pain intensity at 5 minutes and 1, 12, 24, and 72 hours and completed a survey describing the type of pain and its temporal course in the next 7 days.

RESULTS

26 patients (mean age 11.8 years) were randomly assigned to a control or a trial group. The trial group showed significantly lower pain intensities (p < 0.05) at 5 min (M = 0.92, SD = 1.32), 1 h (M = 0.77, SD = 1.01), and 12 h (M = 0.77, SD = 1.54) after band application compared to the control group (5 min: M = 1.62, SD = 1.26; 1 h: M = 1.77, SD = 1.92; and 12 h: M = 1.77, SD = 2.17), whereas no difference between groups (p > 0.05) was found at 24 h (trial: M = 0.62, SD = 1.71; control: M = 1.08, SD = 1.75) and 72 h (trial: M = 0.31, SD = 0.75; control: M = 0.15, SD = 0.55). Patients in the control group reported more frequently the presence of "compressive pain" (58.8%, p < 0.05) from the appliance during the week after the application, while the trial group showed higher frequency of "no pain" (46.2%, p < 0.05). However, PBM did not affect the pain onset (trial: M = 10.86, SD = 26.97; control: M = 5.25, SD = 7.86), peak (trial: M = 15.86, SD = 26.29; control: 6.17, SD = 7.96), and end time (trial: 39.57, SD = 31.33; control: M = 22.02, SD = 25.42) reported by the two groups (p > 0.05).

CONCLUSIONS

PBM might be considered a promising alternative to decrease general pain intensity, although not affecting the typical pain cycle, in terms of the onset, peak, and ending times.

Magnetic Resonance Imaging and Its Effects on Metallic Brackets and Wires: Does It Alter the Temperature and Bonding Efficacy of Orthodontic Devices?

Magnetic resonance imaging (MRI) is a widely used diagnostic technique. Patients wearing orthodontic appliances are often requested to remove their appliances, even when the MRI exam involves anatomical areas far from mouth, in order to avoid heating of the metal and detachment of the appliance. The purpose of the present investigation was to measure and compare temperature changes and orthodontic appliances' adhesion to enamel after different MRIs. A total of 220 orthodontic brackets were bonded on bovine incisors and wires with different materials (stainless steel and nickel titanium). Moreover, various sizes (0.014″ and 0.019″ × 0.025″) were engaged. Appliances were submitted to MRI at two different powers (1.5 T and 3 T). The temperatures of brackets and wires were measured before and after MRI. Subsequently, the shear bond strength (SBS) and adhesive remnant index (ARI) scores were recorded. Statistical analysis was performed. After MRI, a significant increase in the temperature was found for both the brackets and wires in some groups, even if the mean temperature increase was clinically insignificant, as the temperature ranged between 0.05 °C and 2.4 °C for brackets and between 0.42 °C and 1.74 °C for wires. The MRI did not condition bracket adhesion in any group. No differences were reported when comparing the 1.5 T with 3 T groups. The ARI Scores were also significantly lower after MRI. The results of the present report show that, under MRI, orthodontic appliances present a low temperature rise and no debonding risk. Therefore, the removal of orthodontic appliance is not recommended routinely, but is suggested only in the case of a void risk or potential interference in image quality.

Buccolingual Inclination Control of Upper Central Incisors of Aligners: A Comparison with Conventional and Self-Ligating Brackets

OBJECTIVE

The upper incisors torque expression is essential for the orthodontic treatment accuracy. Various orthodontic devices are claimed to have different inclination control capacity. The purpose of this retrospective study was to compare the radiographic buccolingual inclination of upper incisors in patients treated with three different orthodontic techniques.

MATERIAL AND METHODS

Conventional brackets (Victory, 3M), self-ligating appliances (Damon Q, Ormco), and aligners (Invisalign, Align Technology) were tested. Cephalometric data of 25 patients with similar skeletal and dental pretreatment parameters were collected for each technique. Position changes of upper central incisors were assessed with radiographic evaluation before and after therapy. Three different parameters were considered: 11∧SnaSnp, 11∧Ocl and I+ TVL. All variables were measured before (T0) and after (T1) treatment and their variation over treatment was assessed.

RESULTS

When evaluating angular measurements, 11∧SnaSnp and 11∧Ocl angles showed the highest numeric variation with conventional brackets. Lowest values were reported with aligners. However, the differences among various techniques were not significant for both angles (P>0.05). Also I+ TVL linear value variation did not show significant differences among the different groups tested (P>0.05).

CONCLUSION

Conventional multibrackets appliance showed the highest incisal position variations over treatment, but the differences among various groups were not significantly different.

Shear bond strength of two 2-step etch-and-rinse adhesives when bonding ceramic brackets to bovine enamel

AIM

The present study assessed a fracture analysis and compared the shear bond strength (SBS) of two 2-step etch-and-rinse (E&R) adhesives when bonding ceramic orthodontic brackets to bovine enamel.

MATERIALS AND METHODS

Thirty healthy bovine mandibular incisors were selected and were equally and randomly assigned to 2 experimental groups. Ceramic brackets (FLI Signature Clear^®, RMO) were bonded onto bovine enamel using an adhesive system. In group 1 (n=15), the conventional E&R adhesive (OrthoSolo^®+Enlight^®, Ormco) was used, and in group 2 (n=15), the new E&R adhesive limited to ceramic bracket bonding (FLI ceramic adhesive^®: FLI sealant resin^®+FLI adhesive paste^®, RMO) was used. In order to obtain appropriate enamel surfaces, the vestibular surfaces of mandibular bovine incisors were flat ground. After bonding, all the samples were stored in distilled water at room temperature for 21 days and subsequently tested for SBS, using the Instron^® universal testing machine. The Adhesive Remnant Index (ARI) scores were evaluated. Failure modes were assessed using optical microscopy at magnification ×40. A statistic data analysis was performed using the Mann-Whitney U-test (P<0.05).

RESULTS

The test showed a significant difference (P=0.00155) between the two groups for the SBS values. Group 1 had significantly higher SBS values (9.79 to 20.83MPa) than group 2 (8.45 to 13.94MPa). Analysis of the ARI scores revealed that most of the failures occurred at the enamel/adhesive interface. A statistically significant difference was found for the ARI scores between the two groups (P=0.00996). Only two fractured brackets, which remained bonded onto the bovine enamel, were reported. Both occurred in group 1.

CONCLUSION

When bonded to ceramic brackets, FLI ceramic adhesive^® (RMO) was demonstrated to be very predictable and safe for clinical application in enamel bonding, whereas the results obtained with the conventional adhesive system (OrthoSolo^®+Enlight^®, Ormco) were less reproducible and revealed slightly excessive shear bond strength values.

Orthodontic Metallic Lingual Brackets: The Dark Side of the Moon of Bond Failures?

Lingual orthodontics, among both young and adult patients, increased in popularity during last years. The purposes of the present investigation were to evaluate the shear bond strength (SBS) values and Adhesive Remnant Index (ARI) scores of different lingual brackets compared with a vestibular control bracket. One hundred bovine teeth were extracted and embedded in resin blocks. Four different lingual brackets (Idea, Leone; STB, Ormco; TTR, RMO; 2D, Forestadent) and a vestibular control bracket (Victory, 3M) were bonded to the bovine enamel surfaces and subsequently shear tested to failure utilizing a Universal Testing Machine. SBS values were measured. A microscopic evaluation was performed to obtain ARI scores. Statistical analysis was performed at a statistically significant level of p < 0.05 to determine significant differences in SBS values and ARI Scores. No statistically significant variations in SBS were reported among the different groups. Conversely, significant differences were shown in ARI scores among the various groups. Clinical relevance of the present study is that orthodontists can expect similar resistance to debonding forces from lingual appliances as with vestibular brackets.

Minimally Invasive Techniques to Accelerate the Orthodontic Tooth Movement: A Systematic Review of Animal Studies

OBJECTIVE

To evaluate various noninvasive and minimally invasive procedures for the enhancement of orthodontic tooth movement in animals.

MATERIALS AND METHODS

Literature was searched using NCBI (PubMed, PubMed Central, and PubMed Health), MedPilot (Medline, Catalogue ZB MED, Catalogue Medicine Health, and Excerpta Medica Database (EMBASE)), and Google Scholar from January 2009 till 31 December 2014. We included original articles related to noninvasive and minimally invasive procedures to enhance orthodontic tooth movement in animals. Extraction of data and quality assessments were carried out by two observers independently.

RESULTS

The total number of hits was 9195 out of which just 11 fulfilled the inclusion criteria. Nine articles were good and 5 articles were moderate in quality. Low level laser therapy (LLLT) was among the most common noninvasive techniques whereas flapless corticision using various instruments was among the commonest minimally invasive procedures to enhance velocity of tooth movement.

CONCLUSIONS

LLLT, low intensity pulsed ultrasound (LIPUS), mechanical vibration, and flapless corticision are emerging noninvasive and minimally invasive techniques which need further researches to establish protocols to use them clinically with conviction.

The influence of no-primer adhesives and anchor pylons bracket bases on shear bond strength of orthodontic brackets

OBJECTIVE

The aim of this study was to compare the shear bond strength (SBS) and adhesive remnant index (ARI) scores of no-primer adhesives tested with two different bracket bases.

MATERIALS AND METHODS

120 bovine permanent mandibular incisors were divided into 6 groups of 20 specimens. Two brackets (ODP) with different bracket bases (anchor pylons and 80-gauge mesh) were bonded to the teeth using a conventional adhesive (Transbond XT) and two different no-primer adhesive (Ortho Cem; Heliosit) systems. Groups were tested using an instron universal testing machine. SBS values were recorded. ARI scores were measured. SEM microphotographs were taken to evaluate the pattern of bracket bases. Statistical analysis was performed. ANOVA and Tukey tests were carried out for SBS values, whereas a chi-squared test was applied for ARI scores.

RESULTS

Highest bond strength values were reported with Transbond XT (with both pad designs), Ortho Cem bonded on anchor pylons and Heliosit on 80-gauge mesh. A higher frequency of ARI score of "3" was reported for Transbond XT groups. Other groups showed a higher frequency of ARI score "2" and "1."

CONCLUSION

Transbond XT showed the highest shear bond strength values with both pad designs.