A Study of Bite Force and Various Variables in Children Segregated by Angle's Classification

Detection of Lip, Tongue, Masseter, and Temporalis Muscle Contractions with Electromyography Tools as an Early Diagnostic Medium for Dentoalveolar Malocclusion

OBJECTIVES

 This study aims to detect early class I, II, and III malocclusions through the muscle strength of the lips, tongue, masseter, and temporalis.

MATERIALS AND METHODS

 The study subjects were 30 pediatric patients with predetermined criteria. The subjects were divided into class I, II, and III malocclusions where each classification of malocclusion amounted to 10 people. Subjects were differentiated according to gender and age. Tongue pressure during swallowing was recorded by a palatal measurement sensor system. The strength of the activity was assessed when the lip muscles resisted as hard as possible the traction plate placed between the teeth and the lips, then the force was connected to an electromyograph (EMG) to be measured. Temporal and masseter muscle contractions were assessed when the muscles performed swallowing, chewing, mouth opening, resting, mouth closing, and biting movements.

STATISTICAL ANALYSIS

 Data analysis using the SPSS application was performed with the ANOVA test if the data distribution was normal, and if the data distribution was not normal, then the Kruskal-Wallis test was used. Significant data were evaluated by post-hoc tests using least significant difference if the data distribution was normal or the Mann-Whitney test if the data distribution was not normal.

RESULTS

 It was found that there was a significant difference in the left masseter muscle and left temporalis muscle.

CONCLUSION

 EMG can be considered as a tool to detect class I, II, and III malocclusions through muscle contraction. Biting and chewing positions have satisfactory EMG examination results for malocclusion detection. Age and gender of the child may affect the results of EMG examination in certain conditions.

Unravelling the Complexities of Bite Force Determinants in Paediatric Patients: A Literature Review

The amount of maximum voluntary bite force (MVBF) is determined by the combined action of the jaw elevator muscles, which are altered jaw biomechanics and reflex processes. Bite force (BF) measurements can yield valuable information on the activity and function of the jaw muscles. The accuracy of biting force measurements depends on several variables, including age, gender, malocclusion, dental caries, dental prostheses and temporomandibular joint (TMJ). This information is essential for evaluating the development and function of the masticatory system, identifying potential abnormalities or impairments and guiding appropriate treatment interventions for paediatric patients. The aim of this article is to review the literature on the factors affecting bite force and the importance of these factors in assessing dental development and guiding interventions for paediatric patients with bite force-related issues. Additionally, establishing normative values for bite force in different age groups can aid in monitoring growth and detecting any deviations from expected patterns. Measuring bite force in paediatric patients is significant in comprehensive oral health assessment and management.

Unveiling the Influence of the Curve of Spee on Bite Force and Chewing Ability: A Comparative Study

Aim

To investigate the impact of the curve of Spee (CS) accentuation on bite force, chewing ability, and additionally, other factors that influence chewing ability and bite force such as restorations, caries, gender, habits, and TMJ problems.

Materials and Methods

231 participants (118 male and 113 female, mean age = ±27.96 years) were recruited for this cross-section study. Participants completed a data collection sheet in which age, gender, Angle's classification of malocclusion, overjet, overbite, TMJ problems, habits, restorations, and caries experience were recorded. Two examiners made a lower impression, chewing ability test and measured the bite force for each participant. Measurement of the CS was obtained digitally from the poured dental cast, and the categorization was as follows: flat (<1 mm), normal (1-2 mm), or deep (>2 mm).

Results

The mean maximum bite force (MBF) was 468.722 N for participants with flat CS, 389.822 N for normal CS, 647.08 N for deep CS, and 384.667 N for reverse CS. The average MBF was higher for participants with deep CS (p < 0.05). MBF force was higher in males. However, BMI was not significantly related to MBF values. Participants with normal and flat CS have comparable chewing capacity (p > 0.05). Also, a significant difference in bite force and chewing ability was found between the three categories of CS (p < 0.05).

Conclusion

Bite force variations across various CS types were linked to gender and habits. Chewing ability showed no differences concerning gender, habits, TMJ problems, caries, or restorations, emphasizing CS's significant impact on bite force while showcasing the unchanged nature of chewing ability amidst diverse factors.

Correlation of masticatory muscle activity and occlusal function with craniofacial morphology: a prospective cohort study

OBJECTIVES

Masticatory function, including masticatory muscle activity and occlusal function, can be affected by craniofacial morphology. This study aimed to investigate the relationship between craniofacial morphology and masticatory function in participants who had completed orthodontic treatment at least two years before and had stable occlusion.

MATERIALS AND METHODS

Fourty-two healthy participants were prospectively enrolled and divided into three vertical cephalometric groups according to the mandibular plane angle. Masticatory muscle activity (MMA) in the masseter and anterior temporalis muscles was assessed using surface electromyography. The occlusal contact area (OCA) and occlusal force (OF), defined as occlusal function in this study, were evaluated using occlusal pressure mapping system. Masticatory muscle efficiency (MME) was calculated by dividing MMA by OF. The craniofacial morphology was analyzed using a lateral cephalogram. The masticatory function was compared using one-way analysis of variance. Pearson correlations were used to assess relationships between craniofacial morphology and masticatory function.

RESULTS

The hypodivergent group had the lowest MMAand the highest MME in the masseter (167.32 ± 74.92 µV and 0.14 ± 0.06 µV/N, respectively) and anterior temporalis muscles (0.18 ± 0.08 µV/N, p < 0.05). MMA in the masseter showed a positive relationship with mandibular plane angle (r = 0.358), whereas OCA (r = -0.422) and OF (r = -0.383) demonstrated a negative relationship (p < 0.05). The anterior temporalis muscle activity negatively correlated with ramus height (r = -0.364, p < 0.05).

CONCLUSIONS

Vertical craniofacial morphology was related to masticatory function. Hypodivergent individuals may have low MMA and high occlusal function, resulting in good masticatory muscle efficiency.

CLINICAL RELEVANCE

Hypodivergent individuals require careful consideration in orthodontic diagnosis and prosthetic treatment planning.

Comparative Evaluation of Adhesive Bond Strength of Conventional GIC and Cention N to Enamel and Dentin of Primary Teeth: An In Vitro Study

Aim

The aim of this in vitro study was to evaluate and compare the adhesive bond strength of conventional glass ionomer cement (GIC) and Cention N to the primary enamel and dentin using an accelerated fatigue test.

Materials and methods

A total of 30 sound human primary molars were collected and were mounted on a metal cylindrical block using acrylic resin, embedding the root up to cemento-enamel junction (CEJ). Proximal box was prepared on both mesial and distal surfaces, one of the cavity was restored with GIC (Type 9) and the other proximal cavity with Cention N. A nonretentive cavity design was followed for both the materials so as to maintain the uniformity between the two specimens were then placed under a universal testing machine (Instron) and subjected to accelerated cyclic loads till a separation fracture occurs at the tooth-restoration interface. The number of endured cycles a particular restoration could withstand before getting fractured was registered.

Results

Cention N resisted significantly more number of endured cycles before separation from the cavity as compared to GIC (p < 0.001).

Conclusion

Within the limitations of the study, it can be concluded that newly developed material Cention N is preferred alternative over conventional GIC for the restoration of proximal cavities in primary molars.

How to cite this article

Dhull KS, Dutta B, Pattnaik S, et al. Comparative Evaluation of Adhesive Bond Strength of Conventional GIC and Cention N to Enamel and Dentin of Primary Teeth: An In Vitro Study. Int J Clin Pediatr Dent 2022;15(4):412-416.

Comparison of Bite Force and the Influencing Factors Pre- and Post-cementation of Stainless Steel Crown in Children Using T-Scan

Background

In children, stainless steel crowns (SSCs) have become an invaluable restorative option for grossly decayed primary teeth. The crowns are manufactured in different sizes with preformed anatomy which requires trimming or contouring as a necessary step to fit an individual tooth. Initially, this may produce variation in the occlusal contact points yet may not result in pain or discomfort. Little research exists regarding bite force equilibration measurements in children after placing SSC, and its influencing factors such as age and gender.

Aim and objective

To evaluate and compare the measurements of bite force pre- and post-cementation of SSC using the conventional technique at maximal intercuspal position (MIP) on primary molars at different time intervals and whether age and gender influence bite force measurements.

Design

Bite force and occlusal contacts during occlusion were made using T-Scan III. Twenty children scheduled for treatment who needed SSCs were included. T-Scan measurements of the bite force and occlusal contacts of the maxilla and mandibular teeth were recorded and analyzed before and immediately after cementation of SSC later 4 weeks during the follow-up period. These measurements were correlated with age and gender influence.

Results

There was no significant result in the percentage of bite force on the crowned tooth (placement of SSC) at different time intervals. Prematurities were present in all the groups but a significant reduction was seen on the crowned tooth from baseline to 1-month follow-up (p = 0.03). Also, a statistically significant increase in the bite force was seen in >7 years of age (p = 0.006) and no statistical significance among the gender.

Conclusion

Following the standard tooth preparation, the SSC will continue to appear clinically acceptable for many years. Our study children showed an adaptable masticatory system irrespective of age and gender during growth and development.

How to cite this article

Aishwarya N, Nagarathna C, Poovani S, et al. Comparison of Bite Force and the Influencing Factors Pre- and Post-cementation of Stainless Steel Crown in Children Using T-Scan. Int J Clin Pediatr Dent 2021;14(1):46-50.

Comparative study of molar and incisor bite forces regarding deciduous, mixed, and definitive dentition

OBJECTIVE

To compare maximum incisor (MBFinc) and molar (MBFmol) bite forces regarding the type of dentition and sex and to establish a relationship between them.

METHODS

One hundred-five individuals were divided into 3 groups: G1 - 22 females/13 males (4-5 years); G2 - 15 females/20 males (11-12 years); and G3 - 16 females/19 males (17- 18 years). The maximum bite force was recorded with an extraoral measuring device. Three measurements were recorded: right and left molar level (MBFmol) and incisor level (MBFinc). The ratio %MBFinc/MBFmol was determined.

RESULTS

MBFmol and MBFinc values increased with age (p < 0.05). MBFmol showed statistically higher values than MBFinc (p < 0.05), when compared within the same group.

CONCLUSION

MBFinc and MBFmol increased with age. For all groups, MBFmol showed higher values than MBFinc, and %MBFinc/MBFmol ratio was 1:2. No differences were found in maximum bite force between sexes.

Association between muscle activity and overjet in class II malocclusion with surface electromyography

OBJECTIVES

The aim of the study was to assess the association and correlation between the overjet and muscle activity (the masseter and temporalis muscles) in patient with Class II malocclusion in different genders using surface electromyography (sEMG).

MATERIALS AND METHODS

The overjet (measured clinically) and electromyographical activity (rest, chew, post chew rest, clench and post clench rest) of the masseter and temporalis muscle of class II malocclusion patient were assessed in 18 patients (3 males and 15 females) from the School of Dental Science, Hospital University Sains Malaysia.

RESULTS

The results were compared by simple linear regression test to evaluate the association between overjet and muscle activity in different genders. Class II malocclusion patients with increased overjet group showed significant association with masseter muscle activity on chewing stage (P = 0.005, F = 6.081 and adj-R2 = 0.473). Left temporalis muscle in class II malocclusion showed a significant linear association (P = 0.014, F = 0.812 and adj-R2= -0.034) with gender during clench.

CONCLUSION

In conclusion, class II malocclusion patient with increased overjet can affect masticatory muscle function and as well as clench force may differ in gender.

First molar health status in different craniofacial relationships

Objective

To investigate the association between the health status of permanent first molars and different craniofacial relationships among adolescents.

Study design

This is a retrospective study on patients’ records aged 11–15 years. Sex, skeletal relationship, vertical growth pattern, malocclusion, overjet, and overbite were assessed. The health status of permanent first molars was recorded from the orthopantomograms and intraoral photographs as “sound” and “not sound”. Chi-square, Mann–Whitney U and Kruskal–Wallis tests, and Pearson’s correlation coefficient were used to analyze and correlate the assessed variables. Significance level was set at P<0.05.

Results

A total of 210 records were evaluated; 81 were male, 68 had Class I and 91 had Class II skeletal relationships. More than half of the subjects had normal (n=67) to moderate deep bite (n=72); normal (n=91), moderately increased (n=54), to severely increased (n=50) overjet; and Class I (n=106) and Class II division 1 (n=75) malocclusion. Significant differences were found in the health status of the permanent first molars with respect to sex (P=0.034), vertical growth pattern (P=0.01), and overbite (P=0.047). Strong correlations were only found between the health status of the permanent first molars and the following variables: sex (P=0.036) and vertical growth pattern (P=0.004). Significant correlation was further found between the upper left first molar health status and sex (P=0.019) and the lower right first molar health status and the vertical growth pattern (P=0.001). No significant association was found with the anteroposterior craniofacial relationships (P>0.05).

Conclusion

Sex difference and vertical growth patterns were found to be potential predictors of the health status of the permanent first molars. No significant association was found with the anteroposterior craniofacial relationships.

A Study of Correlation of Various Growth Indicators with Chronological Age

Introduction: The aim of this study was to assess the relationship of chronological age with cervical vertebrae skeletal maturation, frontal sinus width and antegonial notch depth and a correlation, if any, among the three variables.

Materials and methods: The samples were derived from lateral cephalometric radiographs of 80 subjects (40 males, 40 females; age range: 10 to 19 years). Cervical vertebral development was evaluated by the method of Hassel and Farman, frontal sinus width was measured by the method described by Ertürk and antegonial notch depth as described by Singer et al. The Pearson’s correlation coefficients were estimated to assess the relationship of chronological age with cervical vertebrae skeletal maturation, frontal sinus width and antegonial notch depth.

Results: The Pearson’s correlation coefficient were 0.855 (p < 0.001) between chronological age and cervical vertebrae skeletal maturation, and 0.333 (p < 0.001) between chronological age and frontal sinus width.

Conclusion: A highly significant positive correlation was found between chronological age and cervical vertebrae skeletal maturation, and between chronological age and frontal sinus width. Nonsignificant correlation was found between chronological age and antegonial notch depth.

How to cite this article: Singh S, Sandhu N, Puri T, Gulati R, Kashyap R. A Study of Correlation of Various Growth Indicators with Chronological Age. Int J Clin Pediatr Dent 2015;8(3): 190-195.