Open healing of contained and non-contained extraction sockets covered with a ribose cross-linked collagen membrane: a pilot study

Alveolar Ridge Preservation with a Novel Cross-Linked Collagen Sponge: Histological Findings from a Case Report

Alveolar ridge preservation (ARP) is a well-documented procedure to maintain bone volume after tooth extraction in order to place implants. However, at the end of the healing process, the residual biomaterial that is not reabsorbed remains embedded in the bone over time. Ribose cross-linked biomaterials demonstrated their ability to promote osteoconduction and complete resorption. The aim of this study was to evaluate the histological healing pattern of a novel ribose cross-linked collagen sponge used as a grafting material left exposed in human sockets at the time of tooth extraction. On a single patient, non-restorable lower first molars were extracted on both sides, and a ribose cross-linked collagen sponge was placed bilaterally in the cavities and left uncovered at the end of the surgery. After six months, core biopsies were taken immediately prior to implant placement; after the sample preparation, a histological analysis was performed. The results are very promising for substitution with newly formed bone and the amount of residual material. Ribose cross-linked collagen sponge could represent a valid alternative to conventional biomaterials for ARP procedures with no need for flap advancement and/or the addition of a membrane to cover the graft, reducing the invasiveness, complexity, and costs of the treatment.

Soft tissue outcomes following alveolar ridge preservation with/without primary flap closure for periodontally damaged extraction socket: A randomized clinical trial

INTRODUCTION

The changes in soft tissue profile following alveolar ridge preservation (ARP) with/without primary flap closure (PC) in periodontally damaged sockets have yet to be discovered.

METHODS

For periodontally damaged non-molar extraction sockets, ARP with PC (group PC)/without PC (group SC) was performed using granule-type xenogeneic bone substitute material and a collagen barrier. Intraoral scans were performed at the time of ARP and 4 months thereafter. Superimposition of STL files was performed to examine tissue change on the soft tissue level. The level of mucogingival junction (MGJ) was also evaluated.

RESULTS

A total of 28 patient (13 in group PC, 15 in group SC) completed the study. Soft tissue profile change was evaluated only when the measurement level was located on the non-mobile tissue. Group PC tended to shrink less on the long axis of the extraction socket than group SC (-4.3 ± 3.1 mm vs. -5.9 ± 4.4 mm at the 1 mm below the pre-extraction gingival margin, p > 0.05). Profilometric analysis (on the region of interest) also have a tendency of less tissue profile change in group PC than group SC (-1.0 ± 0.8 mm vs. -1.3 ± 0.5 mm, p > 0.05). The MGJ level change was not statistically significantly different between the groups (p > 0.05) even though the MGJ level was located more apically at 4 months in group SC compared with group PC.

CONCLUSIONS

Alveolar ridge preservation with PC tended to yield less soft tissue shrinkage than ARP without PC.

Clinical and radiographic assessment of cross-linked hyaluronic acid addition in demineralized bovine bone based alveolar ridge preservation: A human randomized split-mouth pilot study

PURPOSE

To investigate clinically and radiographically at 4 months post-operatively the outcomes of mixing demineralized bovine bone material (DBBM) with cross-linked hyaluronic acid in alveolar ridge preservation.

MATERIAL AND METHODS

Seven patients presenting bilateral hopeless teeth (14 teeth) were enrolled in the study, the test site contained demineralized bovine bone material (DBBM) mixed with cross-linked hyaluronic acid (xHyA) while the control site contained only DBBM. 4 months post-operatively prior to implant placement a Cone beam computed tomography (CBCT) scan was recorded and compared to the initial scan to assess the volumetric and linear bone resorption that occurred in both sites. Clinically, sites that needed further bone grafting at the implant placement stage were recorded. Differences in volumetric and linear bone resorption between both groups were assessed using Wilcoxon signed rank test. McNemar test was also used to evaluate difference in bone grafting need between both groups.

RESULTS

All sites healed uneventfully, volumetric and linear resorption differences between the baseline and 4 months post-operatively were obtained for each site. The mean volumetric and linear bone resorption were respectively 36.56 ± 1.69%, 1.42 ± 0.16 mm in the controls sites and 26.96 ± 1.83%; 0.73 ± 0.052 mm in the tests sites. The values were significantly higher among controls sites (P=0.018). No significant differences were observed in the need for bone grafting between both groups.

CONCLUSION

Cross-linked hyaluronic acid (xHyA) appears to limit the post-extractional alveolar bone resorption when mixed with DBBM.

Recent advances in biofunctional guided bone regeneration materials for repairing defective alveolar and maxillofacial bone: A review

The anatomy of the oral and maxillofacial sites is complex, and bone defects caused by trauma, tumors, and inflammation in these zones are extremely difficult to repair. Among the most effective and reliable methods to attain osteogenesis, the guided bone regeneration (GBR) technique is extensively applied in defective oral and maxillofacial GBR. Furthermore, endowing biofunctions is crucial for GBR materials applied in repairing defective alveolar and maxillofacial bones. In this review, recent advances in designing and fabricating GBR materials applied in oral and maxillofacial sites are classified and discussed according to their biofunctions, including maintaining space for bone growth; facilitating the adhesion, migration, and proliferation of osteoblasts; facilitating the migration and differentiation of progenitor cells; promoting vascularization; providing immunoregulation to induce osteogenesis; suppressing infection; and effectively mimicking natural tissues using graded biomimetic materials. In addition, new processing strategies (e.g., 3D printing) and new design concepts (e.g., developing bone mimetic extracellular matrix niches and preparing scaffolds to suppress connective tissue to actively acquire space for bone regeneration), are particularly worthy of further study. In the future, GBR materials with richer biological functions are expected to be developed based on an in-depth understanding of the mechanism of bone-GBR-material interactions.

One-year performance of posterior narrow diameter implants in hyperglycemic and normo-glycemic patients-a pilot study

OBJECTIVES

The aim of the study was to compare the performance of narrow diameter implants in patients with uncontrolled diabetes mellitus type 2 (T2DM) and normo-glycemic individuals during the first 12 months after implant loading.

MATERIAL AND METHODS

In 16 T2DM patients with HbA1C > 6.5% (test group) and 16 normo-glycemic patients (HbA1C < 6.0%; control group), one to two narrow diameter tissue level implants were placed in the posterior maxilla or mandible. After 3-month lasting integration period, implants were loaded by fixed dentures. The clinical parameters probing depth (PD), bleeding on probing (BOP), attachment loss (CAL), recession and papilla bleeding index (PBI) were assessed manually at loading and after 12 months of function. The paired digital periapical radiographs were analyzed with regard to the change in marginal bone level (MBL) from baseline to 12 months' control. The mean values calculated for both patient groups were statistically analyzed. The technical complications were recorded.

RESULTS

The T2DM group accounted 13 patients due to 3 dropouts. The overall implant survival rate after 12 months was 100%. The differences in means for the clinical parameters and the MBL were statistically non-significant between the T2DM and normo-glycemic patients for the short period of loaded function reported here. No technical complications were recorded.

CONCLUSIONS

The study demonstrated an encouraging clinical outcome with narrow diameter implants in patients with uncontrolled T2DM compared to non-diabetics after 12 months post loading. For the short observation period, no biological and technical complications were reported regardless the glycemic status.

CLINICAL RELEVANCE

Patients with HbA1C > 6.5% may benefit from the treatment with narrow diameter implants by avoiding complex surgical interventions with augmentation procedures.

TRIAL REGISTRATION

Clinicaltrials.gov : NCT04630691.

Hard Tissue Preservation and Recovery in Minimally Invasive Alveolar Surgery Using Three-Dimensional Printing Guide Plate

BACKGROUND

For completely impacted teeth, it is of great significance to locate teeth accurately, preserve hard tissue and recovering the height of alveolar ridge. This can be effectively solved by the digital three-dimensional printing guide technology.

METHODS

Ten patients with completely impacted tooth were selected in this experiment. After cone-beam computed tomography scan, the dicom formal computed tomography data was analyzed for three-dimensional reconstruction by mimics 17.0 software. Then determining the surgical plan and making surgical guide plate. Three-dimensional printing guide plate assisted piezosurgery was used to remove bone and extract impacted teeth. After that, the removed bone cap was back to the original position. Cone-beam computed tomography was used for each operated patients after 1 week and 6 months.

RESULT

The surgical guide plates can locate teeth accurately and the surgery time was reduced for all patients. A week later, all patients healed well and removed the stitches on time. Cone-beam computed tomography showed that the retention of bone caps was good and there was no displacement. All patients showed a normal parameter of pain. Six months later, cone-beam computed tomography showed good bone formation in the extraction area, which filled with new bones completely. The recovery of bone outline and height of alveolar crest at the surgical site were basically consistent with those before the operation.

CONCLUSIONS

Three-dimensional printing guide plates combining with fenestration and bone-cap restoration can locate impacted teeth accurately, reduce the extraction volume of bone, shorten surgery time, and alleviate complications. This was conducive to preserve and restore hard tissue and had great prospective.