What other biologic and mechanical factors might contribute to osteolysis?

Osteocytic cells exposed to titanium particles increase sclerostin expression and inhibit osteoblastic cell differentiation mostly via direct cell-to-cell contact

The mechanism underlying induction of periprosthetic osteolysis by wear particles remains unclear. In this study, cultured MLO‐Y4 osteocytic cells were exposed to different concentrations of titanium (Ti) particles. The results showed that Ti particles increased expression of the osteocytic marker SOST/sclerostin in a dose‐dependent manner, accelerated apoptosis of MLO‐Y4 cells, increased the expression of IL‐6, TNF‐α and connexin 43. SOST silence alleviated the increase of MLO‐Y4 cells apoptosis, decreased the expression of IL‐6, TNF‐α and connexin 43 caused by Ti particles. The different co‐culture systems of MLO‐Y4 cells with MC3T3‐E1 osteoblastic cells were further used to observe the effects of osteocytic cells' changes induced by Ti particles on osteoblastic cells. MLO‐Y4 cells treated with Ti particles inhibited dramatically differentiation of MC3T3‐E1 cells mostly through direct cell‐to‐cell contact. SOST silence attenuated the inhibition effects of Ti‐induced MLO‐Y4 on MC3T3‐E1 osteoblastic differentiation, which ALP level and mineralization of MC3T3‐E1 cells increased and the expression of ALP, OCN and Runx2 increased compared to the Ti‐treated group. Taken together, Ti particles had negative effects on MLO‐Y4 cells and the impact of Ti particles on osteocytic cells was extensive, which may further inhibit osteoblastic differentiation mostly through intercellular contact directly. SOST/sclerostin plays an important role in the process of mutual cell interaction. These findings may help to understand the effect of osteocytes in wear particle‐induced osteolysis.

IRAK-4 in macrophages contributes to inflammatory osteolysis of wear particles around loosened hip implants

TLRs recognizing PAMPS play a role in local immunity and participate in implant-associated loosening. TLR-mediated signaling is primarily regulated by IL-1 receptor associated kinase-M (IRAK-M) negatively and IRAK-4 positively. Our previous studies have proved that wear particles promote endotoxin tolerance in macrophages by inducing IRAK-M. However, whether IRAK-4 is involved in inflammatory osteolysis of wear particles basically, and the specific mechanism of IRAK-4 around loosened hip implants, is still unclear. IRAK-4 was studied in the interface membranes from patients in vivo and in particle-stimulated macrophages to clarify its role. Also, IL-1β and TNF-α levels were measured after particle and LPS stimulation in macrophages with or without IRAK-4 silenced by siRNA. Our results showed that the interface membranes around aseptic and septic loosened prosthesis expressed more IRAK-4 compared with membranes from osteoarthritic patients. IRAK-4 in macrophages increased upon particle and LPS stimulation. In the former, IL-1β and TNF-α levels were lower compared with those of LPS stimulation, and IRAK-4 siRNA could suppress production of pro-inflammatory cytokines. These findings suggest that besides IRAK-M, IRAK-4 also plays an important role in the local inflammatory reaction and contributes to prosthesis loosening.

Titanium particles damage osteocytes and inhibit osteoblast differentiation

Purposes

to study the effect of titanium particles on MLO-Y4 and the effects of osteocytes alterations on osteoblasts.

Methods

cultured MLO-Y4 osteocytes were exposed to different concentrations of titanium (Ti) particles, cell viability was measured using the Cell Counting Kit-8 (CCK-8) assay, apoptosis of MLO-Y4 cells was evaluated by flow cytometry, Real-time PCR quantification of mRNA expression of SOST, at the same time with Western Blot detection sclerosteosis protein expression levels.MC3T3-E1 cells culture with MLO-Y4 cells exposed to different concentrations of titanium (Ti) particles in vitro, in order to detection of osteoblast osteogenetic activity.

Results

Our results showed that Ti particles inhibited cell viability of MLO-Y4 osteocytes in a dose-dependent manner. Incubation with Ti particles caused apoptosis of MLO-Y4cells.Treatment with Ti particles significantly increased expression of the osteocytic marker SOST/sclerostin. Furthermore, treatment of MLO-Y4 cells with Ti particles produced a dose-dependent decrease in ALP activity and decreased mineralization of MC3T3-E1 cells through direct cell-cell contact.

Conclusions

Titanium particles damage osteocytes and inhibit osteoblast differentiation.

Inflammation and Bone Repair: From Particle Disease to Tissue Regeneration

When presented with an adverse stimulus, organisms evoke an immediate, pre-programmed, non-specific innate immune response. The purpose of this reaction is to maintain the organism's biological integrity and function, mitigate or eradicate the injurious source, and re-establish tissue homeostasis. The initial stage of this protective reaction is acute inflammation, which normally reduces or terminates the offending stimulus. As the inflammatory reaction recedes, the stage of tissue repair and regeneration follows. If the above sequence of events is perturbed, reconstitution of normal biological form and function will not be achieved. Dysregulation of these activities may result in incomplete healing, fibrosis, or chronic inflammation. Our laboratory has studied the reaction to wear particles from joint replacements as a paradigm for understanding the biological pathways of acute and chronic inflammation, and potential translational treatments to reconstitute lost bone. As inflammation is the cornerstone for healing in all anatomical locations, the concepts developed have relevance to tissue engineering and regenerative medicine in all organ systems. To accomplish our goal, we developed novel in vitro and in vivo models (including the murine femoral continuous intramedullary particle infusion model), translational strategies including modulation of macrophage chemotaxis and polarization, and methods to interfere with key transcription factors NFκB and MyD88. We purposefully modified MSCs to facilitate bone healing in inflammatory scenarios: by preconditioning the MSCs, and by genetically modifying MSCs to first sense NFκB activation and then overexpress the anti-inflammatory pro-regenerative cytokine IL-4. These advancements provide significant translational opportunities to enhance healing in bone and other organs.

Engineering the Interface: Nanodiamond Coating on 3D-Printed Titanium Promotes Mammalian Cell Growth and Inhibits Staphylococcus aureus Colonization

Additively manufactured selective laser melted titanium (SLM-Ti) opens the possibility of tailored medical implants for patients. Despite orthopedic implant advancements, significant problems remain with regard to suboptimal osseointegration at the interface between the implant and the surrounding tissue. Here, we show that applying a nanodiamond (ND) coating onto SLM-Ti scaffolds provides an improved surface for mammalian cell growth while inhibiting colonization of Staphylococcus aureus bacteria. Owing to the simplicity of our methodology, the approach is suitable for coating SLM-Ti geometries. The ND coating achieved 32 and 29% increases in cell density of human dermal fibroblasts and osteoblasts, respectively, after 3 days of incubation compared with the uncoated SLM-Ti substratum. This increase in cell density complements an 88% reduction in S. aureus detected on the ND-coated SLM-Ti substrata. This study paves a way to create facile antifouling SLM-Ti structures for biomedical implants.

Wear Particle-induced Priming of the NLRP3 Inflammasome Depends on Adherent Pathogen-associated Molecular Patterns and Their Cognate Toll-like Receptors: An In Vitro Study

BACKGROUND

Orthopaedic wear particles activate the NLRP3 inflammasome to produce active interleukin 1β (IL1β). However, the NLRP3 inflammasome must be primed before it can be activated, and it is unknown whether wear particles induce priming. Toll-like receptors (TLRs) are thought to mediate particle bioactivity. It remains controversial whether pathogen-associated molecular patterns (PAMPs) and/or alarmins are responsible for TLR activation by wear particles.

QUESTIONS/PURPOSES

(1) Does priming of the NLRP3 inflammasome by wear particles depend on adherent PAMPs? (2) Does priming of the NLRP3 inflammasome by wear particles depend on TLRs and TIRAP/Mal? (3) Does priming of the NLRP3 inflammasome by wear particles depend on cognate TLRs? (4) Does activation of the NLRP3 inflammasome by wear particles depend on adherent PAMPs?

METHODS

Immortalized murine macrophages were stimulated by as-received titanium particles with adherent bacterial debris, endotoxin-free titanium particles, or titanium particles with adherent ultrapure lipopolysaccharide. To study priming, NLRP3 and IL1β mRNA and IL1β protein levels were assessed in wild-type, TLR4, TLR2, and TIRAP/Mal macrophages. To study activation, IL1β protein secretion was assessed in wild-type macrophages preprimed with ultrapure lipopolysaccharide.

RESULTS

Compared with titanium particles with adherent bacterial debris, endotoxin-free titanium particles induced 86% less NLRP3 mRNA (0.05 ± 0.03 versus 0.35 ± 0.01 NLRP3/GAPDH, p < 0.001) and 91% less IL1β mRNA (0.02 ± 0.01 versus 0.22 ± 0.03 IL1β/GAPDH, p < 0.001). ProIL1β protein level was robustly increased in wild-type macrophages stimulated by particles with adherent PAMPs but was not detectably produced in macrophages stimulated by endotoxin-free particles. Adherence of ultrapure lipopolysaccharide to endotoxin-free particles reconstituted stimulation of NLRP3 and IL1β mRNA. Particles with adherent bacterial debris induced 79% less NLRP3 mRNA (0.09 ± 0.004 versus 0.43 ± 0.13 NLRP3/GAPDH, p < 0.001) and 40% less IL1β mRNA (0.09 ± 0.04 versus 0.15 ± 0.03 IL1β/GAPDH, p = 0.005) in TLR4 macrophages than in wild-type. Similarly, those particles induced 49% less NLRP3 mRNA (0.22 ± 0.10 versus 0.43 ± 0.13 NLRP3/GAPDH, p = 0.004) and 47% less IL1β mRNA (0.08 ± 0.02 versus 0.15 ± 0.03 IL1β/GAPDH, p = 0.012) in TIRAP/Mal macrophages than in wild-type. Particles with adherent ultrapure lipopolysaccharide induced 96% less NLRP3 mRNA (0.012 ± 0.001 versus 0.27 ± 0.05 NLRP3/GAPDH, p = 0.003) and 91% less IL1β mRNA (0.03 ± 0.01 versus 0.34 ± 0.07 IL1β/GAPDH, p < 0.001) expression in TLR4 macrophages than in wild-type. In contrast, those particles did not induce less NLRP3 and IL1β mRNA in TLR2 macrophages. IL1β protein secretion was equivalently induced by particles with adherent bacterial debris or by endotoxin-free particles in a time-dependent manner in wild-type macrophages. For example, particles with adherent bacterial debris induced 99% ± 2% of maximal IL1β secretion after 12 hours, whereas endotoxin-free particles induced 92% ± 11% (p > 0.5).

CONCLUSIONS

This cell culture study showed that adherent PAMPs are required for priming of the NLRP3 inflammasome by wear particles and this process is dependent on their cognate TLRs and TIRAP/Mal. In contrast, activation of the NLRP3 inflammasome by titanium particles is not dependent on adherent PAMPs. Animal and implant retrieval studies are needed to determine whether wear particles have similar effects on the NLRP3 inflammasome in vivo.

CLINICAL RELEVANCE

Our findings, together with recent findings that aseptic loosening associates with polymorphisms in the TIRAP/Mal locus, support that adherent PAMPs may contribute to aseptic loosening in patients undergoing arthroplasty.

Novel concept of a modular hip implant could contribute to less implant failure in THA: a hypothesis

Background

The modularity in total hip arthroplasty (THA) allows orthopaedic surgeons for an exact reconstruction of hip biomechanical parameters especially in revision and tumor arthroplasty. Modular structured femoral stems using taper junctions showed increased implant breakage in the recent past.

Presentation of the hypothesis

We hypothesize that a novel modular stem-neck-interface leads to less implant breakage compared to conventional femoral stems.

Testing of the hypothesis

For this purpose, a novel modular femoral stem for THA was to design and manufacture. Therefore, three different variants of interface mechanisms were developed that enable a simple connection between the stem and the neck modules and allow for intra-operatively adjustment. Three prototypes A, B and C were manufactured and subsequently dynamic fatigue (ISO 7206–6) and body donor tested.

Implication of the hypothesis

Modularity in THA is mainly applied in THA as well as in revision and tumor arthroplasty. Modular implants are barely used because of the high risk of breakage. Another risks in this context are taper fretting, corrosion and disconnection. With the novel design, it should be possible to detach the stem and neck module intra-operatively to adapt the anatomical situation. The novel coupling mechanism of the rotating interface seems to be the most suitable for a secure stem-neck connection and is characterized by good intraoperative handling.

Females with Unexplained Joint Pain Following Total Joint Arthroplasty Exhibit a Higher Rate and Severity of Hypersensitivity to Implant Metals Compared with Males: Implications of Sex-Based Bioreactivity Differences

BACKGROUND

Recent studies indicate that females demonstrate an increased risk of experiencing adverse local tissue reactions, aseptic loosening, and revision after primary metal-on-metal hip resurfacing arthroplasty compared with males; the underlying biological mechanisms responsible for sex discrepancies in implant failure remain unclear. In addition to anatomical and biomechanical sex differences, there may be inherent immunological disparities that predispose females to more aggressive adaptive immune reactivity to implant debris, i.e., metal sensitivity.

METHODS

In this retrospective study, we analyzed sex-associated rates and levels of metal sensitization in 1,038 male and 1,575 female subjects with idiopathic joint pain following total joint arthroplasty (TJA) who were referred for in vitro metal-sensitivity testing.

RESULTS

Females demonstrated a significantly higher rate and severity of metal sensitization compared with males. The median lymphocyte stimulation index (SI) among males was 2.8 (mean, 5.4; 95% confidence interval [CI], 4.9 to 6.0) compared with 3.5 (mean, 8.2; 95% CI, 7.4 to 9.0) among females (p < 0.05). Forty-nine percent of females had an SI of ≥4 (reactive) compared with 38% of males, and the implant-related level of pain was also significantly (p < 0.0001) higher among females (mean, 6.8; 95% CI, 6.6 to 6.9) compared with males (mean, 6.1; 95% CI, 6.0 to 6.3).

CONCLUSIONS

In a select group of patients who had joint pain following TJA and no evidence of infection and who were referred for metal-sensitivity testing, females exhibited a higher level of pain and demonstrated a higher rate and severity (as measured by lymphocyte SI) of metal sensitization compared with males.

LEVEL OF EVIDENCE

Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Mesenchymal stem cells in the aseptic loosening of total joint replacements

Peri-prosthetic osteolysis remains as the main long-term complication of total joint replacement surgery. Research over four decades has established implant wear as the main culprit for chronic inflammation in the peri-implant tissues and macrophages as the key cells mediating the host reaction to implant-derived wear particles. Wear debris activated macrophages secrete inflammatory mediators that stimulate bone resorbing osteoclasts; thus bone loss in the peri-implant tissues is increased. However, the balance of bone turnover is not only dictated by osteoclast-mediated bone resorption but also by the formation of new bone by osteoblasts; under physiological conditions these two processes are tightly coupled. Increasing interest has been placed on the effects of wear debris on the cells of the bone-forming lineage. These cells are derived primarily from multipotent mesenchymal stem cells (MSCs) residing in bone marrow and the walls of the microvasculature. Accumulating evidence indicates that wear debris significantly impairs MSC-to-osteoblast differentiation and subsequent bone formation. In this review, we summarize the current understanding of the effects of biomaterial implant wear debris on MSCs. Emerging treatment options to improve initial implant integration and treat developing osteolytic lesions by utilizing or targeting MSCs are also discussed. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1195-1207, 2017.

Blockade of NF-κB and MAPK pathways by ulinastatin attenuates wear particle-stimulated osteoclast differentiation in vitro and in vivo

Ulinastatin, a urinary trypsin inhibitor (UTI), is widely used to clinically treat lipopolysaccharide (LPS)-related inflammatory disorders recently. Adherent pathogen-associated molecular patterns (PAMPs), of which LPS is the best-studied and classical endotoxin produced by Gram-negative bacteria, act to increase the biological activity of osteopedic wear particles such as polymethyl-methacrylate (PMMA) and titanium particles in cell culture and animal models of implant loosening. The present study was designed to explore the inhibitory effect of UTI on osteoclastogenesis and inflammatory osteolysis in LPS/PMMA-mediated Raw264.7 cells and murine osteolysis models, and investigate the potential mechanism. The in vitro study was divided into the control group, LPS-induced group, PMMA-stimulated group and UTI-pretreated group. UTI (500 or 5000 units/ml) pretreatment was followed by PMMA (0.5 mg/ml) with adherent LPS. The levels of inflammatory mediators including tumour necrosis factor-α (TNF-α), matrixmetallo-proteinases-9 (MMP-9) and interleukin-6 (IL-6), receptor activation of nuclear factor NF-κB (RANK), and cathepsin K were examined and the amounts of phosphorylated I-κB, MEK, JNK and p38 were measured. In vivo study, murine osteolysis models were divided into the control group, PMMA-induced group and UTI-treated group. UTI (500 or 5000 units/kg per day) was injected intraperitoneally followed by PMMA suspension with adherent LPS (2×10⁸ particles/25 μl) in the UTI-treated group. The thickness of interfacial membrane and the number of infiltrated inflammatory cells around the implants were assessed, and bone mineral density (BMD), trabecular number (Tb.N.), trabecular thickness (Tb.Th.), trabecular separation (Tb.Sp.), relative bone volume over total volume (BV/TV) of distal femur around the implants were calculated. Our results showed that UTI pretreatment suppressed the secretion of proinflammatory cytokines including MMP-9, IL-6, TNF-α, RANK and cathepsin K through down-regulating the activity of nuclear factor kappa B (NF-κB) and MAPKs partly in LPS/PMMA-mediated Raw264.7 cells. Finally, UTI treatment decreased the inflammatory osteolysis reaction in PMMA-induced murine osteolysis models. In conclusion, these results confirm the anti-inflammatory potential of UTI in the prevention of particle disease.

Emperor's new clothes: Is particle disease really infected particle disease?

Aseptic loosening remains the most significant long-term complication of total hip replacement. The current paradigm points to an inflammatory response to wear particles as its main trigger. Recently, there have been increasing numbers of positive bacterial isolates reported among patients with clinically absent infection. This paper reviews existing evidence on possible involvement of bacteria and microbial-associated molecular patterns in the pathology of so-called "aseptic loosening." © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1497-1504, 2016.

TNF-α suppression and osteoprotegerin overexpression inhibits wear debris-induced inflammation and osteoclastogenesis in vitro

PURPOSE

Periprosthetic osteolysis, involving RANK/RANKL/osteoprotegerin (OPG) and TNF-α/NFκB signaling, contributes to bone resorption and inflammation. We constructed lentivirus vectors to inhibit TNF-α and enhance OPG expression and assessed their impacts on wear debris-induced inflammation and osteoclastogenesis in an osteoclast/osteoblast coculture system.

METHODS

We transduced mouse osteoblastic MC3T3-E1 cells with Lenti-negative control (Lenti-NC), Lenti-OPG or Lenti-siTNFα-OPG, and murine macrophage/monocyte RAW264.7 cells with Lenti-NC, Lenti-TNF-α siRNA or Lenti-siTNFα-OPG. Then, TNF-α and OPG protein levels were evaluated by enzyme-linked immunosorbent assay. We cocultured transduced MC3T3-E1 and RAW264.7 cells in transwell chambers in the presence of 0.1 mg/mL Ti particles to investigate the capacity of TNF-α inhibition to reduce wear debris-induced inflammation. We also assessed mRNA levels TNF-α, IL-1β, IL-6 and OPG by RT-PCR as well as osteoclastogenesis by tartrate-resistant acid phosphatase.

RESULTS

Lenti-siTNFα-OPG ameliorated Ti-particle-induced expression of TNF-α, IL-1β, IL-6 in MC3T3-E1/RAW264.7 cocultures, while enhancing mRNA and protein levels of OPG, and reducing the fraction of tartrate-resistant acid phosphatase (TRAP)+ cells.

CONCLUSIONS

Lenti-siTNFα-OPG can inhibit the wear debris-induced inflammatory responses and osteoclastogenesis in vitro, and may represent a promising therapeutic candidate for the treatment or prevention of wear particle-induced osteolysis.

Joint replacement surgery and the innate immune system

Total joint replacement is a highly successful, cost-effective surgical procedure that relieves pain and improves function for patients with end-stage arthritis. The most commonly used materials for modern joint replacements include metal alloys such as cobalt chrome and titanium alloys, polymers including polymethylmethacrylate and polyethylene, and ceramics. Implantation of a joint prosthesis incites an acute inflammatory reaction that is regulated by the innate immune system, a preprogrammed non-antigen specific biological response composed of cells, proteins, and other factors. This "frontline" immune mechanism was originally designed to combat invading microorganisms, but now responds to both pathogen-associated molecular patterns or PAMPS (by-products from microorganisms), and damage associated molecular patterns or DAMPS (molecular by-products from cells), via pattern recognition receptors (PRRs). In this way, potentially injurious stimuli that might disrupt the normal homeostatic regulatory mechanisms of the organism are efficiently dealt with, ensuring the survival of the host. Initial surgical implantation of the joint replacement, as well as ongoing generation of wear debris and byproducts during usage of the joint, activates the innate immune system. Understanding and potentially modulating these events may lead to improved function and increased longevity of joint replacements in the future.

Do genetic susceptibility, Toll-like receptors, and pathogen-associated molecular patterns modulate the effects of wear?

Overwhelming evidence supports the concept that wear particles are the primary initiator of aseptic loosening of orthopaedic implants. It is likely, however, that other factors modulate the biologic response to wear particles. This review focuses on three potential other factors: genetic susceptibility, Toll-like receptors (TLRs), and bacterial pathogen-associated molecular patterns (PAMPs). WHERE ARE WE NOW?: Considerable evidence is emerging that both genetic susceptibility and TLR activation are important factors that modulate the biologic response to wear particles, but it remains controversial whether bacterial PAMPs also do so. WHERE DO WE NEED TO GO?: Detailed understanding of the roles of these other factors may lead to identification of novel therapeutic targets for patients with aseptic loosening. HOW DO WE GET THERE?: Highest priority should be given to polymorphism replication studies with large numbers of patients and studies to replicate the reported correlation between bacterial biofilms and the severity of aseptic loosening.

Interaction of Materials and Biology in Total Joint Replacement - Successes, Challenges and Future Directions

Total joint replacement (TJR) has revolutionized the treatment of end-stage arthritic disorders. This success is due, in large part, to a clear understanding of the important interaction between the artificial implant and the biology of the host. All surgical procedures in which implants are placed in the body evoke an initial inflammatory reaction, which generally subsides over several weeks. Thereafter, a series of homeostatic events occur leading to progressive integration of the implant within bone and the surrounding musculoskeletal tissues. The eventual outcome of the operation is dependent on the characteristics of the implant, the precision of the surgical technique and operative environment, and the biological milieu of the host. If these factors and events are not optimal, adverse events can occur such as the development of chronic inflammation, progressive bone loss due to increased production of degradation products from the implant (periprosthetic osteolysis), implant loosening or infection. These complications can lead to chronic pain and poor function of the joint reconstruction, and may necessitate revision surgery or removal of the prosthesis entirely. Recent advances in engineering, materials science, and the immunological aspects associated with orthopaedic implants have fostered intense research with the hope that joint replacements will last a lifetime, and facilitate pain-free, normal function.

Influence of clinical and radiological variables on the extent and distribution of periprosthetic osteolysis in total hip arthroplasty with a hydroxyapatite-coated multiple-hole acetabular component: a magnetic resonance imaging study

Polyethylene wear-induced osteolysis constitutes the most severe long-term complication of total hip arthroplasties (THA). Our aim was to assess through MRI the severity and growth pattern of osteolysis, as well as the influence clinical-radiographic variables exert. We analyzed 75 THA with an average evolution time of 13.67years. The implant was a titanium alloy, non-cemented, multiple-hole model with hydroxyapatite coating. Osteolysis was found with a peripheral pattern in 48 and a central pattern in 6; in 52 cases it was continuous, and in 4, isolated. Out of 118 screws, 20 exhibited lysis. There was a proportional correlation between osteolysis severity and wear rate with age, physical activity and acetabular abduction, as well as an association between said variables and peripheral and continuous patterns.

Increasing both CoCrMo-alloy particle size and surface irregularity induces increased macrophage inflammasome activation in vitro potentially through lysosomal destabilization mechanisms

Recent investigations indicate that innate immune "danger-signaling" pathways mediate metal implant debris induced-inflammatory responses, for example, NALP3 inflammasome. How the physical characteristics of particles (size, shape, and chemical composition) affect this inflammatory reactivity remains controversial. We examined the role of Cobalt-Chromium-Molybdenum (CoCrMo) alloy particle shape and size on human macrophage phagocytosis, lysosomal destabilization, and inflammasome activation. Round/smooth versus irregularly shaped/rough CoCrMo-alloy particles of ∼1 and 6-7 µm diameter were investigated for differential lysosomal damage and inflammasome activation in human monocytes/macrophages. While spherical/smooth 1 µm CoCrMo-alloy particles did not measurably affect macrophage IL-1β production, irregular 1 µm CoCrMo-alloy particles induced significant IL-1β increases over controls. Both round/smooth particles and irregular CoCrMo-alloy particles that were 6-7 µm in size induced >10-fold increases in IL-1β production compared to similarly shaped smaller particles (p < 0.05). Larger irregular particles induced a greater degree of intracellular lysosomal damage and a >3-fold increase in IL-1β versus similarly sized round/smooth particles (at an equal dose, particles/cell). CoCrMo-alloy particle-size-induced IL-1β production was dependent on the lysosomal protease Cathepsin B, further supporting lysosomal destabilization as causative in inflammation. Phagocytosable larger/irregular shaped particles (6 µm) demonstrated the greatest lysosomal destabilization (observed immunofluorescently) and inflammatory reactivity when compared on an equal dose basis (particles/cell) to smaller/spherical 1 µm particles in vitro.

A TNF variant that associates with susceptibility to musculoskeletal disease modulates thyroid hormone receptor binding to control promoter activation

Tumor necrosis factor (TNF) is a powerful pro-inflammatory cytokine and immuno-regulatory molecule, and modulates susceptibility to musculoskeletal diseases. Several meta-analyses and replicated association studies have implicated the minor 'A' variant within the TNF promoter single nucleotide polymorphism (SNP) rs361525 (-238A/G) as a risk allele in joint related disorders, including psoriatic and juvenile idiopathic arthritis, and osteolysis after joint arthroplasty. Here we characterized the effect of this variant on TNF promoter function. A transcriptional reporter, encoding the -238A variant of the TNF promoter, resulted in 2.2 to 2.8 times greater transcriptional activation versus the 'G' variant in murine macrophages when stimulated with pro-inflammatory stimuli. Bioinformatic analysis predicted a putative binding site for thyroid hormone receptor (TR) for the -238A but not the -238G allele. Overexpression of TR-α induced promoter expression 1.8-fold in the presence of the 'A' allele only. TR-α expression both potentiated and sensitized the -238A response to LPS or a titanium particulate stimulus, whilst siRNA knockdown of either THRA or THRB impaired transcriptional activation for the -238A variant only. This effect was independent of receptor-ligand binding of triiodothyronine. Immunohistochemical analysis of osteolysis interface membranes from patients undergoing revision surgery confirmed expression of TR-α within osteoclast nuclei at the resorption surface. The 'A' allele at rs361525 confers increased transcriptional activation of the TNF promoter and influences susceptibility to several arthritic conditions. This effect is modulated, at least in part, by binding of TR, which both sensitizes and potentiates transcriptional activation of the 'A' variant independent of its endogenous ligand.

An in vivo study of osteoplastic properties of resorbable poly-3-hydroxybutyrate in models of segmental osteotomy and chronic osteomyelitis

A series of 3D implants and filling materials prepared from powdered biodegradable polymers, polyhydroxyalkanoates (PHAs), have been designed for the purposes of reparative osteogenesis. The 3D implants are made of resorbable polymer of hydroxybutyric acid (poly-3-hydroxybutyrate, P3HB) and a composite of this polymer with hydroxyapatite (HA) (P3HB/HA). The properties of the implants were studied in vivo in a model of segmental osteotomy and compared with commercial material Bio-Oss(®). All implants containing P3HB as the main component facilitate reconstructive osteogenesis. P3HB and P3HB/HA show pronounced osteoplastic properties; their in vivo degradation is slow and corresponds to the growth of a new bone tissue, facilitating normal reparative osteogenesis. Also, powdered P3HB and P3HB/tienam can be used as filling materials for osteoplasty of bone cavities infected by Staphylococcus aureus. Biodegradable 3D implants and P3HB-based filling materials show pronounced osteoplastic properties and degrade in vivo at a slow rate, enabling normal reparative osteogenesis.

Emerging ideas: Instability-induced periprosthetic osteolysis is not dependent on the fibrous tissue interface

BACKGROUND

Stable initial fixation of a total joint arthroplasty implant is critical to avoid the risk of aseptic loosening and premature clinical failure. With implant motion, a fibrous tissue layer forms at the bone-implant interface, leading to implant migration and periprosthetic osteolysis. At the time of implant revision surgery, proresorptive signaling cytokines are expressed in the periimplant fibrous membrane. However, the exact role of this fibrous tissue in causing periprosthetic osteolysis attributable to instability remains unknown.

QUESTIONS/HYPOTHESES

We propose an alternative mechanism of periprosthetic osteolysis independent of the fibrous tissue layer, where pressurized fluid flow along the bone-implant interface activates mechanosensitive osteocytes in the periprosthetic bone, causing the release of proresorptive cytokines and subsequent osteoclast differentiation and osteolysis.

METHOD OF STUDY

An animal model for instability-induced osteolysis that mimics the periprosthetic bone-implant interface will be used. In this model, a fibrous tissue membrane is allowed to form in the periprosthetic zone, and pressurized fluid flow transmitted through this membrane reliably creates osteolytic lesions in the periprosthetic bone. In this study, half of the rats will have the fibrous tissue present, while the other half will not. We will determine whether the fibrous tissue membrane is essential for the release of proosteoclastic cytokines, leading to osteoclast differentiation and periprosthetic bone loss, by measuring the volume of bone resorption and presence of proresorptive cytokines at the bone-implant interface.

SIGNIFICANCE

We will determine whether the fibrous tissue membrane is crucial for osteoclastogenic signaling in the setting of periimplant osteolysis. In the future, this will allow us to test therapeutic interventions, such as specific cytokine inhibitors or alterations in implant design, which may translate into new, clinically relevant strategies to prevent osteolysis.

Fracture of the modular femoral neck component in total hip arthroplasty

The use of modularity, specifically dual modular femoral stems, in total hip arthroplasty has increased in popularity over the past 2 decades. While offering several distinct advantages intraoperatively, the long-term success of adding a second modular junction has yet to be established. One potential complication of increasing modularity is component fracture. We present a case of modular femoral neck prosthesis fracture necessitating revision surgery to treat this complication. Careful preoperative planning during revision of these failures is essential to avoid morbidity and unnecessary subsequent revision surgeries, as demonstrated in this case. The combined effects of crevice and fretting corrosion, large-diameter femoral head, long modular neck, metal-on-metal articulation, patient size, and activity level may have all played integral roles in creating an environment susceptible to this classic pattern of fatigue fracture.

IRAK-M in macrophages around septically and aseptically loosened hip implants

The most common long-term complication of joint arthroplasty is loosening, which is mediated by chronic inflammatory cytokines produced by macrophages stimulated by implant-derived debris and eventually bacterial components adherent to such debris. In this study, antiinflammatory interleukin-1 receptor-associated kinase-M (IRAK-M) was studied in macrophages in interface membranes in vivo using immunohistochemical staining and in titanium particle-stimulated macrophages in vitro using reverse transcriptase-polymerase chain reaction. Results show that the interface membranes of septically and aseptically loosened prosthesis express more IRAK-M protein than control membranes from osteoarthritic patient and that IRAK-M mRNA-levels increase upon particle stimulation. These findings suggest that, the upregulation of IRAK-M in macrophages is involved in the local immunosuppression around implants, and may contribute to septic and aseptic implant loosening.

Submicron sized ultra-high molecular weight polyethylene wear particle analysis from revised SB Charité III total disc replacements

Submicron sized particles are frequently observed in retrieved total hip and knee periprosthetic tissues and appear to be critical in the activation of the phagocytic inflammatory response. In this paper the concentration, size and shape of ultra-high molecular weight polyethylene (UHMWPE) wear particles between 0.05 and 2.00μm were determined after isolation from periprosthetic tissues from retrieved lumbar SB Charité III total disc replacements (TDR) using scanning electron microscopy (SEM). For comparison, UHMWPE wear particles were isolated from γ-radiation-air sterilized total hip arthroplasty (THA) revision tissues. The mean concentration of UHMWPE particles in TDR tissues was 1.6×10(9)g(-1)tissue (range 1.3-2.0), which was significantly lower than the concentration of 2.3×10(9)g(-1) THA revision tissue (range 1.8-3.2) (P=0.03). The mean particle size (equivalent circular diameter: TDR, 0.46μm; THA 0.53μm, P=0.60) and mean shape were comparable between TDR and THA (aspect ratio: TDR, 1.89; THA, 1.99, P=0.35; roundness: TDR, 0.58; THA, 0.56, P=0.35). However, the TDR particles tended to be smaller and more round. Although no correlations were found between visible damage to the UHMWPE core and the concentration or shape of the UHMWPE particles, a positive correlation was found between increasing particle size and increasing rim penetration of the TDR core (P=0.04). The presence of UHMWPE particles of similar size and shape in TDR tissue, albeit lower in concentration, might explain why, unlike THA, pain rather than osteolysis is the major reason for revision surgery.

Titanium particles activate toll-like receptor 4 independently of lipid rafts in RAW264.7 murine macrophages

Adherent pathogen-associated molecular patterns (PAMPs) act through toll-like receptor 2 (TLR2) and TLR4 to increase the biological activity of orthopedic wear particles in cell culture and animal models of implant loosening. This study tested whether this is dependent on TLR association with lipid rafts as reported for the response to soluble TLR ligands. For this purpose, RAW264.7 murine macrophages were activated by exposure to titanium particles with adherent PAMPs, soluble lipopolysaccharide (LPS), soluble lipotecichoic acid (LTA), or heat-killed bacteria that had been extensively washed to remove soluble PAMPs. Lipid rafts were isolated by two independent methods and the location of TLR4 and TLR2 was analyzed by Western blotting. The cognate TLRs associated with lipid rafts when the macrophages were activated with soluble LPS and LTA but not after stimulation with either titanium particles with adherent PAMPs or heat-killed bacteria. The lipid raft disruptor, methyl-β-cyclodextrin, dose-dependently inhibited TNF-α release in response to LPS but had no affect on TNF-α release in response to titanium particles with adherent PAMPs. We conclude, therefore, that titanium particles with adherent PAMPs and heat-killed bacteria activate TLR2 and TLR4 in macrophages without inducing either TLR to associate with lipid rafts. These results have important implications for the mechanisms of orthopedic implant loosening as well the mechanisms for TLR activation in other inflammatory situations.

Bacterial pathogen-associated molecular patterns stimulate biological activity of orthopaedic wear particles by activating cognate Toll-like receptors

Aseptic loosening of orthopaedic implants is induced by wear particles generated from the polymeric and metallic components of the implants. Substantial evidence suggests that activation of Toll-like receptors (TLRs) may contribute to the biological activity of the wear particles. Although pathogen-associated molecular patterns (PAMPs) produced by Gram-positive bacteria are likely to be more common in patients with aseptic loosening, prior studies have focused on LPS, a TLR4-specific PAMP produced by Gram-negative bacteria. Here we show that both TLR2 and TLR4 contribute to the biological activity of titanium particles with adherent bacterial debris. In addition, lipoteichoic acid, a PAMP produced by Gram-positive bacteria that activates TLR2, can, like LPS, adhere to the particles and increase their biological activity, and the increased biological activity requires the presence of the cognate TLR. Moreover, three lines of evidence support the conclusion that TLR activation requires bacterially derived PAMPs and that endogenously produced alarmins are not sufficient. First, neither TLR2 nor TLR4 contribute to the activity of "endotoxin-free" particles as would be expected if alarmins are sufficient to activate the TLRs. Second, noncognate TLRs do not contribute to the activity of particles with adherent LPS or lipoteichoic acid as would be expected if alarmins are sufficient to activate the TLRs. Third, polymyxin B, which inactivates LPS, blocks the activity of particles with adherent LPS. These results support the hypothesis that PAMPs produced by low levels of bacterial colonization may contribute to aseptic loosening of orthopaedic implants.

The acceleration of implant osseointegration by liposomal Wnt3a

The strength of a Wnt-based strategy for tissue regeneration lies in the central role that Wnts play in healing. Tissue injury triggers local Wnt activation at the site of damage, and this Wnt signal is required for the repair and/or regeneration of almost all tissues including bone, neural tissues, myocardium, and epidermis. We developed a biologically based approach to create a transient elevation in Wnt signaling in peri-implant tissues, and in doing so, accelerated bone formation around the implant. Our subsequent molecular and cellular analyses provide mechanistic insights into the basis for this pro-osteogenic effect. Given the essential role of Wnt signaling in bone formation, this protein-based approach may have widespread application in implant osseointegration.

Fluid pressure and flow as a cause of bone resorption

BACKGROUND

Unstable implants in bone become surrounded by an osteolytic zone. This is seen around loose screws, for example, but may also contribute to prosthetic loosening. Previous animal studies have shown that such zones can be induced by fluctuations in fluid pressure or flow, caused by implant instability.

METHOD

To understand the roles of pressure and flow, we describe the 3-dimensional distribution of osteolytic lesions in response to fluid pressure and flow in a previously reported rat model of aseptic loosening. 50 rats had a piston inserted in the proximal tibia, designed to produce 20 local spikes in fluid pressure of a clinically relevant magnitude (700 mmHg) twice a day. The spikes lasted for about 0.3 seconds. After 2 weeks, the pressure was measured in vivo, and the osteolytic lesions induced were studied using micro-CT scans.

RESULTS

Most bone resorption occurred at pre-existing cavities within the bone in the periphery around the pressurized region, and not under the piston. This region is likely to have a higher fluid flow and less pressure than the area just beneath the piston. The velocity of fluid flow was estimated to be very high (roughly 20 mm/s).

INTERPRETATION

The localization of the resorptive lesions suggests that high-velocity fluid flow is important for bone resorption induced by instability.

Functional interface micromechanics of 11 en-bloc retrieved cemented femoral hip replacements

BACKGROUND AND PURPOSE

Despite the longstanding use of micromotion as a measure of implant stability, direct measurement of the micromechanics of implant/bone interfaces from en bloc human retrievals has not been performed. The purpose of this study was to determine the stem-cement and cement-bone micromechanics of functionally loaded, en-bloc retrieved, cemented femoral hip components.

METHODS

11 fresh frozen proximal femurs with cemented implants were retrieved at autopsy. Specimens were sectioned transversely into 10-mm slabs and fixed to a loading device where functional torsional loads were applied to the stem. A digital image correlation technique was used to document micromotions at stem-cement and cement-bone interfaces during loading.

RESULTS

There was a wide range of responses with stem-cement micromotions ranging from 0.0006 mm to 0.83 mm (mean 0.17 mm, SD 0.29) and cement-bone micromotions ranging from 0.0022 mm to 0.73 mm (mean 0.092 mm, SD 0.22). There was a strong (linear-log) inverse correlation between apposition fraction and micromotion at the stem-cement interface (r(2) = 0.71, p < 0.001). There was a strong inverse log-log correlation between apposition fraction at the cement-bone interface and micromotion (r(2) = 0.85, p < 0.001). Components that were radiographically well-fixed had a relatively narrow range of micromotions at the stem-cement (0.0006-0.057 mm) and cement-bone (0.0022-0.029 mm) interfaces.

INTERPRETATION

Minimizing gaps at the stem-cement interface and encouraging bony apposition at the cement-bone interface would be clinically desirable. The cement-bone interface does not act as a bonded interface in actual use, even in radiographically well-fixed components. Rather, the interface is quite compliant, with sliding and opening motions between the cement and bone surfaces.

Cellular chemotaxis induced by wear particles from joint replacements

The destruction of bone around joint replacements (periprosthetic osteolysis) is an adverse biological response associated with the generation of excessive wear particles. Wear debris from the materials used for joint replacements stimulate a chronic inflammatory and foreign body reaction that leads to increased osteoclast differentiation and maturation, and decreased bone formation. Wear debris induces both local and systemic trafficking of inflammatory cells to the site of particle generation. Recent studies have shown that this effect is mediated primarily by chemotactic cytokines (chemokines) including macrophage chemotactic protein-1 (MCP-1, also known as CCL2), macrophage inhibitory protein-1 (MIP-1), Interleukin-8 (IL-8 or CXCL8) and others. These ligands migrate along a concentration gradient to interact with G-protein-linked transmembrane receptors on the cell surface. Chemokines are involved in the innate and adaptive immune responses, angiogenesis, wound healing and tissue repair. In vitro, in vivo and tissue retrieval studies have shown that chemokine-directed systemic trafficking of polymorphonuclear leukocytes and cells of the monocyte/macrophage lineage to wear particles result in the release of pro-inflammatory factors and subsequent bone loss. Modulation of the chemokine ligand-receptor axis is a potential strategy to mitigate the adverse effects of wear particles from joint replacements.

Co-Cr-Mo alloy particles induce tumor necrosis factor alpha production in MLO-Y4 osteocytes: a role for osteocytes in particle-induced inflammation

Wear debris-induced osteolysis is purportedly the limiting problem affecting the long term results of joint arthroplasty. Pathogenic effects of wear debris in peri-implant cells such as macrophages, osteoblasts and osteoclasts have been well studied. In contrast, the effects of wear debris on osteocytes, which make up over 90% of all bone cells, remain unknown. We hypothesized that metal implant debris can induce the pro-inflammatory response in osteocytes. This study demonstrated the effects of cobalt-chromium-molybdenum alloy (Co-Cr-Mo) particles on a well-characterized MLO-Y4 osteocyte cell line. Co-Cr-Mo alloy particle treatment significantly (p<0.05) up-regulated tumor necrosis factor alpha (TNFalpha) gene expression after 3 and 6 h and TNFalpha protein production after 24 h, but down-regulated interleukin-6 (IL-6) gene expression after 6 h. Co-Cr-Mo alloy particle treatment also induced osteocyte apoptosis after 24 h. This apoptotic effect was partially (40%) dependent on TNFalpha. Therefore, our results suggest that osteocytes play a role in particle-induced inflammation and bone resorption following total joint arthroplasty by inducing pro-inflammatory cytokines and inducing osteocyte apoptosis.

In vitro assessments of nanomaterial toxicity

Nanotechnology has grown from a scientific interest to a major industry with both commodity and specialty nanomaterial exposure to global populations and ecosystems. Sub-micron materials are currently used in a wide variety of consumer products and in clinical trials as drug delivery carriers and imaging agents. Due to the expected growth in this field and the increasing public exposure to nanomaterials, both from intentional administration and inadvertent contact, improved characterization and reliable toxicity screening tools are required for new and existing nanomaterials. This review discusses current methodologies used to assess nanomaterial physicochemical properties and their in vitro effects. Current methods lack the desired sensitivity, reliability, correlation and sophistication to provide more than limited, often equivocal, pieces of the overall nanomaterial performance parameter space, particularly in realistic physiological or environmental models containing cells, proteins and solutes. Therefore, improved physicochemical nanomaterial assays are needed to provide accurate exposure risk assessments and genuine predictions of in vivo behavior and therapeutic value. Simpler model nanomaterial systems in buffer do not accurately duplicate this complexity or predict in vivo behavior. A diverse portfolio of complementary material characterization tools and bioassays are required to validate nanomaterial properties in physiology.