Approaches to engineer stability of beetle luciferases

Development of a stable luciferase@nanoflower-based method for the sensitive detection of pesticide residues in milk

Acetylcholinesterase inhibition-luciferase bioluminescence system enables rapid detection of organophosphate and carbamate pesticide residues. However, firefly luciferase (FLuc) suffers from poor stability and short luminescence duration, thereby introducing uncertainties in detection. To address this problem, nanoflower-immobilized FLuc (FLuc@NFs) was prepared using a coprecipitation method, which markedly enhanced stability and activity. FLuc@NFs exhibited intact nanoflower structures and allowed storage at 25 °C and at 4 °C for 2 weeks, overcoming the limitation of free enzyme storage at -20 °C. In the bioluminescence reaction, FLuc@NFs at 1 mg/mL achieved 62.14 % higher luminescence than free FLuc, with stable signals extending from 10 s to 30 min, enabling high-throughput detection. The system achieved detection limits of 5 and 10 ng/mL for chlorpyrifos and carbaryl, respectively, demonstrating improved reliability and sensitivity in pesticide detection.

Engineering a thermophilic luciferase variant from Photuris pennsylvanica into a mesophilic-like enzyme for expanded applications potential

Luciferase, known for its exceptional catalytic bioluminescent properties, has been widely utilized in diverse applications within biotechnology and medical research. Currently, enhancing thermostability and catalytic activity is a primary focus for optimizing luciferase modifications to further expand its detection range and accuracy. This study revealed a highly thermostable luciferase variant from Photuris pennsylvanica, Ppe146-1H2, which inherently exhibits thermophilic enzyme characteristics that are not conducive for optimal catalytic performance in practical applications. Building upon structural analysis, this research engineered Ppe146-1H2 into Ppe146-LGR via the residue substitutions I422L, D435G, and I519R. Ppe146-LGR retained notably thermostability, exhibiting a melting temperature (Tm value) of 75.3 ± 0.3 °C. Additionally, the variant demonstrated efficient catalytic activity at moderate temperatures, exhibiting 3.8 and 3.7-fold higher catalytic efficiencies towards D-luciferin and ATP at 37 °C compared to Ppe146-1H2. Overall, Ppe146-LGR displayed mesophilic-like catalytic activity and thermophilic-like thermostability simultaneously. In addition to enhanced catalytic properties, Ppe146-LGR emitted longer-wavelength light (580 nm) and operated optimally at near-neutral pH, coordinating with the current demands of luciferase applications. Through validation via rapid bacterial detection and reporter gene assays, it has been demonstrated that Ppe146-LGR holds promise as a valuable tool in the field of bioluminescence technology.

Molecular Dynamics Simulation Combined with Neural Relationship Inference and Markov Model to Reveal the Relationship between Conformational Regulation and Bioluminescence Properties of Gaussia Luciferase

Gaussia luciferase (Gluc) is currently known as the smallest naturally secreted luciferase. Due to its small molecular size, high sensitivity, short half-life, and high secretion efficiency, it has become an ideal reporter gene and is widely used in monitoring promoter activity, studying protein-protein interactions, protein localization, high-throughput drug screening, and real-time monitoring of tumor occurrence and development. Although studies have shown that different Gluc mutations exhibit different bioluminescent properties, their mechanisms have not been further investigated. The purpose of this study is to reveal the relationship between the conformational changes of Gluc mutants and their bioluminescent properties through molecular dynamics simulation combined with neural relationship inference (NRI) and Markov models. Our results indicate that, after binding to the luciferin coelenterazine (CTZ), the α-helices of the 109-119 residues of the Gluc Mutant2 (GlucM2, the flash-type mutant) are partially unraveled, while the α-helices of the same part of the Gluc Mutant1 (GlucM1, the glow-type mutant) are clearly formed. The results of Markov flux analysis indicate that the conformational differences between glow-type and flash-type mutants when combined with luciferin substrate CTZ mainly involve the helicity change of α7. The most representative conformation and active pocket distance analysis indicate that compared to the flash-type mutant GlucM2, the glow-type mutant GlucM1 has a higher degree of active site closure and tighter binding. In summary, we provide a theoretical basis for exploring the relationship between the conformational changes of Gluc mutants and their bioluminescent properties, which can serve as a reference for the modification and evolution of luciferases.

Biochemical Analysis Leads to Improved Orthogonal Bioluminescent Tools

Engineered luciferase-luciferin pairs have expanded the number of cellular targets that can be visualized in tandem. While light production relies on selective processing of synthetic luciferins by mutant luciferases, little is known about the origin of selectivity. The development of new and improved pairs requires a better understanding of the structure-function relationship of bioluminescent probes. In this work, we report a biochemical approach to assessing and optimizing two popular bioluminescent pairs: Cashew/d-luc and Pecan/4'-BrLuc. Single mutants derived from Cashew and Pecan revealed key residues for selectivity and thermal stability. Stability was further improved through a rational addition of beneficial residues. In addition to providing increased stability, the known stabilizing mutations surprisingly also improved selectivity. The resultant improved pair of luciferases are >100-fold selective for their respective substrates and highly thermally stable. Collectively, this work highlights the importance of mechanistic insight for improving bioluminescent pairs and provides significantly improved Cashew and Pecan enzymes which should be immediately suitable for multicomponent imaging applications.

Mutant firefly luciferase enzymes resistant to the inhibition by sodium chloride

OBJECTIVES

Firefly luciferase, one of the most extensively studied enzymes, has numerous applications. However, luciferase activity is inhibited by sodium chloride. This study was aimed at obtaining mutant luciferase enzymes resistant to the sodium chloride inhibition.

RESULTS

We first obtained two mutant luciferase enzymes whose inhibition were alleviated and determined the mutations to be Val288Ile and Glu488Val. Under medical dialysis condition (140 mM sodium chloride), the wild type was inhibited to 44% of its original activity level. In contrast, the single mutants, Val288Ile and Glu488Val, retained 67% and 79% of their original activity, respectively. Next, we introduced Val288Ile and Glu488Val mutations into wild-type luciferase to create a double mutant using site-directed mutagenesis. Notably, the double mutant retained its activity more than 95% of that in the absence of sodium chloride.

CONCLUSIONS

The mutant luciferase, named luciferase CR, was found to retain its activity in various concentrations of sodium chloride. The luciferase CR may be extensively useful in any bioassay which includes firefly luciferase and is employed in the presence of sodium chloride.

The elusive relationship between structure and colour emission in beetle luciferases

In beetles, luciferase enzymes catalyse the conversion of chemical energy into light through bioluminescence. The principles of this process have become a fundamental biotechnological tool that revolutionized biological research. Different beetle species can emit different colours of light, despite using the same substrate and highly homologous luciferases. The chemical reasons for these different colours are hotly debated yet remain unresolved. This Review summarizes the structural, biochemical and spectrochemical data on beetle bioluminescence reported over the past three decades. We identify the factors that govern what colour is emitted by wild-type and mutant luciferases. This topic is controversial, but, in general, we note that green emission requires cationic residues in a specific position near the benzothiazole fragment of the emitting molecule, oxyluciferin. The commonly emitted green-yellow light can be readily changed to red by introducing a variety of individual and multiple mutations. However, complete switching of the emitted light from red to green has not been accomplished and the synergistic effects of combined mutations remain unexplored. The minor colour shifts produced by most known mutations could be important in establishing a 'mutational catalogue' to fine-tune emission of beetle luciferases, thereby expanding the scope of their applications.

Palette of Luciferases: Natural Biotools for New Applications in Biomedicine

Optoanalytical methods based on using genetically encoded bioluminescent enzymes, luciferases, allow one to obtain highly sensitive signals, are non-invasive, and require no external irradiation. Bioluminescence is based on the chemical reaction of oxidation of a low-molecular-weight substrate (luciferin) by atmospheric oxygen, which is catalyzed by an enzyme (luciferase). Relaxation of the luciferin oxidation product from its excited state is accompanied by a release of a quantum of light, which can be detected as an analytical signal. The ability to express luciferase genes in various heterological systems and high quantum yields of luminescence reactions have made these tools rather popular in biology and medicine. Among several naturally available luciferases, a few have been found to be useful for practical application. Luciferase size, the wavelength of its luminescence maximum, enzyme thermostability, optimal pH of the reaction, and the need for cofactors are parameters that may differ for luciferases from different groups of organisms, and this fact directly affects the choice of the application area for each enzyme. It is quite important to overview the whole range of currently available luciferases based on their biochemical properties before choosing one bioluminescent probe suitable for a specific application.

Low-dimensional Dynamics of Two Coupled Biological Oscillators

The circadian clock and the cell cycle are two biological oscillatory processes that coexist within individual cells. These two oscillators were found to interact, which can lead to their synchronization. Here, we develop a method to identify a low-dimensional stochastic model of the coupled system directly from time-lapse imaging in single cells. In particular, we infer the coupling and non-linear dynamics of the two oscillators from thousands of mouse and human single-cell fluorescence microscopy traces. This coupling predicts multiple phase-locked states showing different degrees of robustness against molecular fluctuations inherent to cellular-scale biological oscillators. For the 1:1 state, the predicted phase-shifts upon period perturbations were validated experimentally. Moreover, the phase-locked states are temperature-independent and evolutionarily conserved from mouse to human, hinting at a common underlying dynamical mechanism. Finally, we detect a signature of the coupled dynamics in a physiological context, explaining why tissues with different proliferation states exhibited shifted circadian clock phases.

Firefly Luciferase Mutant with Enhanced Activity and Thermostability

The luciferase isolated from the firefly Photinus pyralis (Ppy) catalyzes a two-step reaction that results in the oxidation of d-luciferin accompanied by emission of yellow-green light with a peak at 560 nm. Among many applications, Ppy luciferase has been used extensively as a reporter gene in living cells and organisms. However, some biological applications are limited by the low stability of the luciferase and limited intracellular luciferin concentration. To address these challenges, efforts to protein engineer Ppy luciferase have resulted in a number of mutants with improved properties such as thermostability, pH tolerance, and catalytic turn over. In this work, we combined amino acid mutations that were shown to enhance the enzyme's thermostability (Mutant E) with those reported to enhance catalytic activity (LGR). The resulting mutant (YY5) contained eight amino acid changes from the wild-type luciferase and exhibited both improved thermostability and brighter luminescence at low luciferin concentrations. Therefore, YY5 may be useful for reporter gene applications.

A Luciferase Reporter Gene System for High-Throughput Screening of γ-Globin Gene Activators

Luciferase reporter gene assays have long been used for drug discovery due to their high sensitivity and robust signal. A dual reporter gene system contains a gene of interest and a control gene to monitor non-specific effects on gene expression. In our dual luciferase reporter gene system, a synthetic promoter of γ-globin gene was constructed immediately upstream of the firefly luciferase gene, followed downstream by a synthetic β-globin gene promoter in front of the Renilla luciferase gene. A stable cell line with the dual reporter gene was cloned and used for all assay development and HTS work. Due to the low activity of the control Renilla luciferase, only the firefly luciferase activity was further optimized for HTS. Several critical factors, such as cell density, serum concentration, and miniaturization, were optimized using tool compounds to achieve maximum robustness and sensitivity. Using the optimized reporter assay, the HTS campaign was successfully completed and approximately 1000 hits were identified. In this chapter, we also describe strategies to triage hits that non-specifically interfere with firefly luciferase.

A Novel Streptavidin-luciferase Fusion Protein: Preparation, Properties and Application in Hybridization Analysis of DNA

A streptavidin-luciferase fusion protein comprising the thermostable mutant form of firefly luciferase Luciola mingrelica and minimal core streptavidin was constructed. The streptavidin-luciferase fusion was mainly produced in a tetrameric form with high luciferase and biotin-binding activities. It was shown that fusion has the same K_m values for ATP and luciferin and the bioluminescence spectra as initial luciferase. The linear dependence of the bioluminescence signal on the content of the fusion was observed within the range of 10^-18 -10^-13 mol per well. Successful application of obtained fusion in a biospecific bioluminescence assay based on biotin-streptavidin interactions was demonstrated by the example of a specific DNA hybridization analysis. A DNA hybridization analysis for Escherichia coli cells identification was developed using unique for these cells gadB fragment encoding glutamate decarboxylase. The amplified biotinylated GadB fragments were hybridized with the immobilized oligonucleotide probes; then, the biotin in the DNA duplexes was detected using the streptavidin-luciferase fusion protein. To reach the high sensitivity of the assay, we optimized the conditions of the assay. It was shown that the use of Pluronic for plate modification resulted in a significant reduction in the DNA detection limit which finally was 0.4 ng per well.

Temperature regulates splicing efficiency of the cold-inducible RNA-binding protein gene Cirbp

Gotic et al. show that the temperature-dependent accumulation of cold-inducible RNA-binding protein (Cirbp) mRNA is controlled primarily by the regulation of splicing efficiency. As revealed by genome-wide “approach-to-steady-state” kinetics, this post-transcriptional mechanism is widespread in the temperature-dependent control of gene expression.

In mammals, body temperature fluctuates diurnally around a mean value of 36°C–37°C. Despite the small differences between minimal and maximal values, body temperature rhythms can drive robust cycles in gene expression in cultured cells and, likely, animals. Here we studied the mechanisms responsible for the temperature-dependent expression of cold-inducible RNA-binding protein (CIRBP). In NIH3T3 fibroblasts exposed to simulated mouse body temperature cycles, Cirbp mRNA oscillates about threefold in abundance, as it does in mouse livers. This daily mRNA accumulation cycle is directly controlled by temperature oscillations and does not depend on the cells’ circadian clocks. Here we show that the temperature-dependent accumulation of Cirbp mRNA is controlled primarily by the regulation of splicing efficiency, defined as the fraction of Cirbp pre-mRNA processed into mature mRNA. As revealed by genome-wide “approach to steady-state” kinetics, this post-transcriptional mechanism is widespread in the temperature-dependent control of gene expression.

Three-Dimensional Imaging of the Intracellular Fate of Plasmid DNA and Transgene Expression: ZsGreen1 and Tissue Clearing Method CUBIC Are an Optimal Combination for Multicolor Deep Imaging in Murine Tissues

Evaluation methods for determining the distribution of transgene expression in the body and the in vivo fate of viral and non-viral vectors are necessary for successful development of in vivo gene delivery systems. Here, we evaluated the spatial distribution of transgene expression using tissue clearing methods. After hydrodynamic injection of plasmid DNA into mice, whole tissues were subjected to tissue clearing. Tissue clearing followed by confocal laser scanning microscopy enabled evaluation of the three-dimensional distribution of transgene expression without preparation of tissue sections. Among the tested clearing methods (ClearT2, SeeDB, and CUBIC), CUBIC was the most suitable method for determining the spatial distribution of transgene expression in not only the liver but also other tissues such as the kidney and lung. In terms of the type of fluorescent protein, the observable depth for green fluorescent protein ZsGreen1 was slightly greater than that for red fluorescent protein tdTomato. We observed a depth of ~1.5 mm for the liver and 500 μm for other tissues without preparation of tissue sections. Furthermore, we succeeded in multicolor deep imaging of the intracellular fate of plasmid DNA in the murine liver. Thus, tissue clearing would be a powerful approach for determining the spatial distribution of plasmid DNA and transgene expression in various murine tissues.

The Effect of Surface Charge Saturation on Heat-induced Aggregation of Firefly Luciferase

We present here the effect of firefly luciferase surface charge saturation and the presence of some additives on its thermal-induced aggregation. Three mutants of firefly luciferase prepared by introduction of surface Arg residues named as 2R, 3R and 5R have two, three and five additional arginine residues substituted at their surface compared to native luciferase; respectively. Turbidimetric study of heat-induced aggregation indicates that all three mutants were reproducibly aggregated at higher rates relative to wild type in spite of their higher thermostability. Among them, 2R had most evaluated propensity to heat-induced aggregation. Therefore, the hydrophilization followed by appearing of more substituted arginine residues with positive charge on the firefly luciferase surface was not reduced its thermal aggregation. Nevertheless, at the same condition in the presence of charged amino acids, e.g. Arg, Lys and Glu, as well as a hydrophobic amino acid, e.g. Val, the heat-induced aggregation of wild type and mutants of firefly luciferases was markedly decelerated than those in the absence of additives. On the basis of obtained results it seems, relinquishment of variety in charge of amino acid side chains, they via local interactions with proteins cause to decrease rate and extent of their thermal aggregation.

The role of proline substitutions within flexible regions on thermostability of luciferase

Improving the stability of firefly luciferase has been a critical issue for its wider industrial applications. Studies about hyperthermophile proteins show that flexibility could be an effective indicator to find out weak spots to engineering thermostability of proteins. However, the relationship among flexibility, activity and stability in most of proteins is unclear. Proline is the most rigid residue and can be introduced to rigidify flexible regions to enhance thermostability of proteins. We firstly apply three different methods, molecular dynamics (MD) simulation, B-FITTER and framework rigidity optimized dynamics algorithm (FRODA) to determine the flexible regions of Photinus pyralis luciferase: Fragment 197-207; Fragment 471-481 and Fragment 487-495. Then, introduction of proline is used to rigidify these flexible regions. Two mutants D476P and H489P within most flexible regions are finally designed. In the results, H489P mutant shows improved thermostability while maintaining its catalytic efficiency compared to that of wild type luciferase. Flexibility analysis confirms that the overall rigidity and local rigidity of H489P mutant are greatly strengthened. D476P mutant shows decreased thermosatbility and the reason for this is elucidated at the molecular level. S307P mutation is randomly chosen outside the flexible regions as a control. Thermostability analysis shows that S307P mutation has decreased kinetic stability and enhanced thermodynamic stability.