A Soft Transporter Robot Fueled by Light

A bionic mimosa soft robot based on a multi-responsive PNIPAM-PEGDA hydrogel composition

Deformation plays a vital role in the survival of natural organisms. One example is that plants deform themselves to face the sun for sufficient sunlight exposure, which allows them to produce nutrients through photosynthesis. Drawing inspiration from nature, researchers have been exploring the development of 3D deformable materials. However, the traditional approach to manufacturing deformable hydrogels relies on complex technology, which limits their potential applications. In this study, we simulate the stress variations observed in the plant tissue to create a 3D structure from a 2D material. Using UV curing technology, we create a single-layer poly(N-isopropylacrylamide) hydrogel sheet with microchannels that exhibit distinct swelling rates when subjected to stimulation. After a two-step curing process, we produce a poly(N-isopropylacrylamide)-polyethylene glycol diacrylatedouble-layer structure that can be manipulated to change its shape by controlling the light and solvent content. Based on the double-layer structure, we fabricate a dual-response driven bionic mimosa robot that can perform a variety of functions. This soft robot can not only reversibly change its shape but also maintain a specific shape without continuous stimulation. Its capacity for reversible deformation, resulting from internal stress, presents promising application prospects in the biomedical and soft robotics domain. This study delivers an insightful framework for the development of programmable soft materials.

Light-driven soft microrobots based on hydrogels and LCEs: development and prospects

In the daily life of mankind, microrobots can respond to stimulations received and perform different functions, which can be used to complete repetitive or dangerous tasks. Magnetic driving works well in robots that are tens or hundreds of microns in size, but there are big challenges in driving microrobots that are just a few microns in size. Therefore, it is impossible to guarantee the precise drive of microrobots to perform tasks. Acoustic driven micro-nano robot can achieve non-invasive and on-demand movement, and the drive has good biological compatibility, but the drive mode has low resolution and requires expensive experimental equipment. Light-driven robots move by converting light energy into other forms of energy. Light is a renewable, powerful energy source that can be used to transmit energy. Due to the gradual maturity of beam modulation and optical microscope technology, the application of light-driven microrobots has gradually become widespread. Light as a kind of electromagnetic wave, we can change the energy of light by controlling the wavelength and intensity of light. Therefore, the light-driven robot has the advantages of programmable, wireless, high resolution and accurate spatio-temporal control. According to the types of robots, light-driven robots are subdivided into three categories, namely light-driven soft microrobots, photochemical microrobots and 3D printed hard polymer microrobots. In this paper, the driving materials, driving mechanisms and application scenarios of light-driven soft microrobots are reviewed, and their advantages and limitations are discussed. Finally, we prospected the field, pointed out the challenges faced by light-driven soft micro robots and proposed corresponding solutions.

Multimodal Autonomous Locomotion of Liquid Crystal Elastomer Soft Robot

Self-oscillation phenomena observed in nature serve as extraordinary inspiration for designing synthetic autonomous moving systems. Converting self-oscillation into designable self-sustained locomotion can lead to a new generation of soft robots that require minimal/no external control. However, such locomotion is typically constrained to a single mode dictated by the constant surrounding environment. In this study, a liquid crystal elastomer (LCE) robot capable of achieving self-sustained multimodal locomotion, with the specific motion mode being controlled via substrate adhesion or remote light stimulation is presented. Specifically, the LCE is mechanically trained to undergo repeated snapping actions to ensure its self-sustained rolling motion in a constant gradient thermal field atop a hotplate. By further fine-tuning the substrate adhesion, the LCE robot exhibits reversible transitions between rolling and jumping modes. In addition, the rolling motion can be manipulated in real time through light stimulation to perform other diverse motions including turning, decelerating, stopping, backing up, and steering around complex obstacles. The principle of introducing an on-demand gate control offers a new venue for designing future autonomous soft robots.

Embedded Physical Intelligence in Liquid Crystalline Polymer Actuators and Robots

Responsive materials possess the inherent capacity to autonomously sense and respond to various external stimuli, demonstrating physical intelligence. Among the diverse array of responsive materials, liquid crystalline polymers (LCPs) stand out for their remarkable reversible stimuli-responsive shape-morphing properties and their potential for creating soft robots. While numerous reviews have extensively detailed the progress in developing LCP-based actuators and robots, there exists a need for comprehensive summaries that elucidate the underlying principles governing actuation and how physical intelligence is embedded within these systems. This review provides a comprehensive overview of recent advancements in developing actuators and robots endowed with physical intelligence using LCPs. This review is structured around the stimulus conditions and categorizes the studies involving responsive LCPs based on the fundamental control and stimulation logic and approach. Specifically, three main categories are examined: systems that respond to changing stimuli, those operating under constant stimuli, and those equip with learning and logic control capabilities. Furthermore, the persisting challenges that need to be addressed are outlined and discuss the future avenues of research in this dynamic field.

An Untethered Soft Crawling Robot Driven by Wireless Power Transfer Technology

Soft robots based on flexible materials have attracted the attention due to high flexibility and great environmental adaptability. Among the common driving modes, electricity, light, and magnetism have the limitations of wiring, poor penetration capability, and sophisticated equipment, respectively. Here, an emerging wireless driving mode is proposed for the soft crawling robot based on wireless power transfer (WPT) technology. The receiving coil at the robot's tail, as an energy transfer station, receives energy from the transmitting coil and supplies the electrothermal responsiveness to drive the robot's crawling. By regulating the WPT's duration to control the friction between the robot and the ground, bidirectional crawling is realized. Furthermore, the receiving coil is also employed as a sensory organ to equip the robot with localization, ID recognition, and sensing capabilities based on electromagnetic coupling. This work provides an innovative and promising strategy for the design and integration of soft crawling robots, exhibiting great potential in the field of intelligent robots.

Nanomagnetic Elastomers for Realizing Highly Responsive Micro- and Nanosystems

Evolution has produced natural systems that generate motion and sense external stimuli at the micro- and nanoscales. At extremely small scales, the intricate motions and large deformations shown by these biosystems are due to a tipping balance between their structural compliance and the actuating force generated in them. Artificially mimicking such ingenious systems for scientific and engineering applications has been approached through the development and use of different smart materials mostly limited to microscale dimensions. To push the application range down to the nanoscale, we developed a material preparation process that yields a library of nanomagnetic elastomers with high magnetic particle concentrations. Through this process, we have realized a material with the highest magnetic-to-elastic force ratio, as is shown by an extensive mechanical and magnetic characterization of the materials. Furthermore, we have fabricated and actuated micro- and nanostructures mimicking cilia, demonstrating the extreme compliance and responsiveness of the developed materials.

Radial Expansion Favors the Burrowing Behavior of Urechis unicinctus

Urechis unicinctus can utilize the ability of large deformation to advance in sands by radial expansion, just using a small force. However, the large deformation of U. unicinctus skin and the discrete nature of the sands make it hard to analyze this process quantitatively. In this study, we aim to uncover the burrowing mechanism of U. unicinctus in granular sediments by combining discrete and finite elements. We observe that U. unicinctus will expand radially at the head, and then the head will shrink to move forward. The radial expansion will collapse the sands and let them flow, making it easy to advance. U. unicinctus mainly relies on the skin's large deformation and sufficient pressure to achieve radial expansion. Thus, we first establish the large deformation constitutive model of the skin. The stress-strain relationship can be expressed by the Yeoh model. Meanwhile, the pressure required for radial expansion is indirectly measured by the balloon experiment. To study the effect of radial expansion on the burrowing behavior, we use the finite element method-discrete element method (FEM-DEM) coupling model to simulate the expansion process of burrowing. The simulated pressure for radial expansion is very close to the experimental data, verifying the reliability of the simulation. The results show that the expansion can drastically reduce the pressure of sand particles on the head front face by 97.1% ± 0.6%, significantly decreasing the difficulty of burrowing. This unique underwater burrow method of U. unicinctus can provide new ideas for engineering burrowing devices in soft soil, especially for granular sediments.

A Photomechanical Film in which Liquid Crystal Design Shifts the Absorption into the Visible Light Range

Liquid crystalline polymer networks (LCN) with azobenzene monomers bend reversibly under UV-light irradiation, combining photomechanical and photothermal effects. However, the harmful nature of UV-light limits their use in biology and soft robotics. Although visible light-absorbing tetra-ortho-fluoro-substituted azobenzenes exist, liquid crystalline monomers have never been prepared. Previously, such azobenzenes were added as photoactive additives (up to 10%) to otherwise passive liquid crystalline polymer networks. In this work, a molecular design of a liquid crystalline, polymerizable azobenzene switchable by visible light is presented. The monomer assembles in a highly fluid nematic phase, but polymerizes in a layered smectic C phase. The films are produced solely from the monomer without additional liquid crystalline components and are actuated with visible light. Bending experiments in air and under water differentiate photomechanical and photothermal effects. Remarkably, a 60 µm splay aligned film maintains its deformation for hours, slowly reverting over days. Monomer liquid crystallinity is characterized using differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and polarized optical microscopy (POM); polymer films are analyzed using WAXS and DSC on a homogeneously aligned film. The synthetic procedure is high yielding and polymer film fabrication is scalable, which enables the use of safe and efficient photomechanical LCNs in soft robotics, engineering and biology.

A Bionic Venus Flytrap Soft Microrobot Driven by Multiphysics for Intelligent Transportation

With the continuous integration of material science and bionic technology, as well as increasing requirements for the operation of robots in complex environments, researchers continue to develop bionic intelligent microrobots, the development of which will cause a great revolution in daily life and productivity. In this study, we propose a bionic flower based on the PNIPAM-PEGDA bilayer structure. PNIPAM is temperature-responsive and solvent-responsive, thus acting as an active layer, while PEGDA does not change significantly in response to a change in temperature and solvent, thus acting as a rigid layer. The bilayer flower is closed in cold water and gradually opens under laser illumination. In addition, the flower gradually opens after injecting ethanol into the water. When the volume of ethanol exceeds the volume of water, the flower opens completely. In addition, we propose a bionic Venus flytrap soft microrobot with a bilayer structure. The robot is temperature-responsive and can reversibly transform from a 2D sheet to a 3D tubular structure. It is normally in a closed state in both cold (T < 32 °C) and hot water (T > 32 °C), and can be used to load and transport objects to the target position (magnetic field strength < 1 T).

Photocontrollable Elongation Actuation of Liquid Crystal Elastomer Films with Well-Defined Crease Structures

Although liquid crystal elastomers (LCEs) have demonstrated various applications in artificial muscles and soft robotics, their inherent flexibility and orientation-dependent forces limit their functions. For instance, LCEs can sustain a high actuation force when they contract but cannot elongate to drive loads with large displacements. In this study, it is demonstrated that photocontrollable elongation actuation with a large strain can be achieved in polydomain LCEs by programming the crease structures in a well-defined order to couple the actuation forces. Efficient photoactuation without overheating-induced damage to the materials is favored, based on the well-designed photosensitive molecular switch crosslinker via the synergy of photochemical and photothermal effects. The LCE actuator can jack up heavy loads, elongate freely, and contract back to manipulate distant objects. Theoretical analysis based on a finite element simulation of the deformation energy during the actuation process reveals a trade-off between the abilities of jacking-up and withstanding load. More importantly, this study simplifies the design of a single material with functions inherent only in other soft robotic devices based on the assembly of multiple modules, thus providing a design strategy for surpassing instinctive properties of conventional soft materials to expand the functions of soft robotics.

Light-Powered Liquid Crystal Polymer Network Actuator Using TiO2 Nanoparticles as an Inorganic Ultraviolet-Light Absorber

Recently, the design and fabrication of light-powered actuators have attracted immense attention because of the manufacturing of intelligent soft robots and innovative self-regulating devices. Accordingly, a liquid crystal polymer network (LCN) provides a promising platform due to its reversible and multistimulus-responsive shape-changing behaviors. In particular, doping nanoparticles with exclusive properties into the LCN can produce interesting results. In this work, we investigated a TiO₂ nanoparticle-based LCN polymer light-powered actuator. TiO₂ nanoparticles as an inorganic ultraviolet (UV)-light absorber can substantially affect the LCN polymer's oscillatory behavior. Our results demonstrate that the oscillation characteristics are directly influenced by the presence of nanoparticles, and we studied the influencing factors. The effectiveness of the elastic modulus, thermomechanical force, and curvature was investigated using different weight percentages of TiO₂ nanoparticles. Our results show that, in the presence of TiO₂ nanoparticles, the polymer chain order and inter-chain interactions in the polymer matrix as well as the structural deformation of relevant polymer surfaces are changed.

Control-Oriented Models for Hyperelastic Soft Robots Through Differential Geometry of Curves

The motion complexity and use of exotic materials in soft robotics call for accurate and computationally efficient models intended for control. To reduce the gap between material and control-oriented research, we build upon the existing piece-wise constant curvature framework by incorporating hyperelastic and viscoelastic material behavior. In this work, the continuum dynamics of the soft robot are derived through the differential geometry of spatial curves, which are then related to finite-element data to capture the intrinsic geometric and material nonlinearities. To enable fast simulations, a reduced-order integration scheme is introduced to compute the dynamic Lagrangian matrices efficiently, which in turn allows for real-time (multilink) models with sufficient numerical precision. By exploring the passivity and using the parameterization of the hyperelastic model, we propose a passivity-based adaptive controller that enhances robustness toward material uncertainty and unmodeled dynamics-slowly improving their estimates online. As a study-case, a soft robot manipulator is developed through additive manufacturing, which shows good correspondence with the dynamic model under various conditions, for example, natural oscillations, forced inputs, and under tip-loads. The solidity of the approach is demonstrated through extensive simulations, numerical benchmarks, and experimental validations.

Three-dimensional liquid crystal polymer actuators assembled by athermal photo-welding

Photodeformable liquid crystal polymers (LCPs) exhibit shape changes of different modes like bending, twisting, and oscillation, which depend on the orientation of liquid crystals. However, it is challenging to create a three-dimensional (3D) actuator with distinct actuation modes due to the difficulty of local orientation in a complex bulk architecture. Here we propose a strategy based on athermal photo-welding to integrate different orientations into a single flexible actuator by the photofluidization of azobenzene-containing linear LCPs. Stretch-induced uniaxial films are cut in different directions and subsequently welded via local photofluidization, during which the LCP transitions from a high-modulus glassy state to a rubbery state upon photoisomerization of azobenzene at room temperature. As a consequence, a cucumber vine-like structure with the opposite handedness and a lifting gripper are constructed by such a cut-and-weld process, demonstrating diverse deformation modes of winding, unwinding, and curling. This strategy provides an athermal process for the fabrication of seamless 3D flexible actuators without structural defects, which have potential applications in micromechanical systems, soft robotics, and artificial muscles.

Shape Morphing Directed by Spatially Encoded, Dually Responsive Liquid Crystalline Elastomer Micro-Actuators

Liquid crystalline elastomers (LCEs) with intrinsic molecular anisotropy can be programmed to morph shapes under external stimuli. However, it is difficult to program the position and orientation of individual mesogenic units separately and locally, whether in-plane or out-of-plane, since each mesogen is linked to adjacent ones through the covalently bonded polymer chains. Here, dually responsive, spindle-shaped micro-actuators are synthesized from LCE composites, which can reorient under a magnetic field and change the shape upon heating. When the discrete micro-actuators are embedded in a conventional and nonresponsive elastomer with programmed height distribution and in-plane orientation in local regions, robust and complex shape morphing induced by the cooperative actuations of the locally distributed micro-actuators, which corroborates with finite element analysis, are shown. The spatial encoding of discrete micro-actuators in a nonresponsive matrix allows to decouple the actuators and the matrix, broadening the material palette to program local and global responses to stimuli for applications including soft robotics, smart wearables, and sensors.

Leaping liquid crystal elastomers

Snap-through mechanisms are pervasive in everyday life in biological systems, engineered devices, and consumer products. Snap-through transitions can be realized in responsive materials via stimuli-induced mechanical instability. Here, we demonstrate a rapid and powerful snap-through response in liquid crystalline elastomers (LCEs). While LCEs have been extensively examined as material actuators, their deformation rate is limited by the second-order character of their phase transition. In this work, we locally pattern the director orientation of LCEs and fabricate mechanical elements with through-thickness (functionally graded) modulus gradients to realize stimuli-induced responses as fast as 6 ms. The rapid acceleration and associated force output of the LCE elements cause the elements to leap to heights over 200 times the material thickness. The experimental examination in functionally graded LCE elements is complemented with computational evaluation of the underlying mechanics. The experimentally validated model is then exercised as a design tool to guide functional implementation, visualized as directional leaping.

Smart Nematic Liquid Crystal Polymers for Micromachining Advances

The miniaturization of tools is an important step in human evolution to create faster devices as well as precise micromachines. Studies around this topic have allowed the creation of small-scale objects capable of a wide range of deformation to achieve complex tasks. Molecular arrangements have been investigated through liquid crystal polymer (LCP) to program such a movement. Smart polymers and hereby liquid crystal matrices are materials of interest for their easy structuration properties and their response to external stimuli. However, up until very recently, their employment at the microscale was mainly limited to 2D structuration. Among the numerous issues, one concerns the ability to 3D structure the material while controlling the molecular orientation during the polymerization process. This review aims to report recent efforts focused on the microstructuration of LCP, in particular those dealing with 3D microfabrication via two-photon polymerization (TPP). Indeed, the latter has revolutionized the production of 3D complex micro-objects and is nowadays recognized as the gold standard for 3D micro-printing. After a short introduction highlighting the interest in micromachines, some basic principles of liquid crystals are recalled from the molecular aspect to their implementation. Finally, the possibilities offered by TPP as well as the way to monitor the motion into the fabricated microrobots are highlighted.

High Throughput Fabrication of Flexible Top-Driven Sensing Probe

In this work, considering the current status of conservative and complicated traditional thrombosis treatment methods, a kind of flexible intelligent probe (FIP) with a top-driven sensing strategy is proposed to realize the expected function of thrombosis accurate localization in a liquid flow environment. After throughput fabrication, we find that the FIP has excellent electrical conductivity and mechanical properties. Notable, our FIP with the principle of piezo-resistive sensing has a quasi-linear sensitivity (approx. 0.325 L per minute) to flow sensing in the low flow velocity range (0-1 L per minute). Via the well-designed magnetically driven method, our FIP has a maximum deflection output force of 443.264 mN, a maximum deflection angle of 43°, and a maximum axial force of 54.176 mN. We demonstrate that the FIP is capable of completing the specified command actions relatively accurately and has a good response to real-time sensing feedback performance, which has broad application prospects in thrombus localization detection.

Plasticized liquid crystal networks and chemical motors for the active control of power transmission in mechanical devices

The miniaturization of mechanical devices poses new challenges in powering, actuation, and control since traditional approaches cannot be used due to inherent size limitations. This is particularly challenging in untethered small-scale machines where independent actuation of multicomponent and multifunctional complex systems is required. This work showcases the integration of self-powered chemical motors and liquid crystal networks into a powertrain transmission device to achieve orthogonal untethered actuation for power and control. Driving gears with a protein-based chemical motor were used to power the transmission system with Marangoni propulsive forces, while photothermal liquid crystal networks were used as a photoresponsive clutch to engage/disengage the gear system. Liquid crystal networks were plasticized for optimized photothermal bending actuation to break the surface tension of water and achieve reversible immersion/resurfacing at the air-water interface. This concept is demonstrated in a milliscale transmission gear system and offers potential solutions for aquatic soft robots whose powering and control mechanisms must be necessarily decoupled.

Self-Folding Liquid Crystal Network Filaments Patterned with Vertically Aligned Mesogens

Fibrous soft actuators with high molecular anisotropy are of interest for shape morphing from 1D to 2D and 3D in response to external stimuli with high actuation efficiency. Nevertheless, few have fabricated fibrous actuators with controlled molecular orientations and stiffness. Here, we fabricate filaments from liquid crystal networks (LCNs) with segmental crosslinking density and gradient porosity from a mixture of di-acrylate mesogenic monomers and small-molecule nematic or smectic liquid crystals (LCs) filled in a capillary. During photopolymerization, phase separation between the small-molecule LCs and LCN occurs, making one side of the filament considerably denser than the other side. To direct its folding mode (bending or twisting), we control the alignment of LC molecules within the capillary, either along or perpendicular to the filament long axis. We show that the direction of UV exposure can determine the direction of phase separation, which in turn direct the deformation of the filament after removal of the small-molecule LCs. We find that the vertical alignment of LCs within the filament is essential to efficiently direct bending deformation. By photopatterning the filament with segmental crosslinking density, we can induce a reversible folding/unfolding into 2D and 3D geometries triggered by deswelling/swelling in an organic solvent. Moreover, by taking advantage of the large elastic modulus of LCNs and large contrast of the modulus before and after swelling, we show that the self-folded LCP filament could act as a strong gripper.

Multi-Degree-of-Freedom Robots Powered and Controlled by Microwaves

Microwaves have become a promising wireless driving strategy due to the advantages of transmissivity through obstacles, fast energy targeting, and selective heating. Although there are some studies on microwave powered artificial muscles based on different structures, the lack of studies on microwave control has limited the development of microwave-driven (MWD) robots. Here, a far-field MWD parallel robot controlled by adjusting energy distribution via changing the polarization direction of microwaves at 2.47 GHz is first reported. The parallel robot is based on three double-layer bending actuators composed of wave-absorbing sheets and bimetallic sheets, and it can implement circular and triangular path at a distance of 0.4 m under 700 W transmitting power. The thermal response rate of the actuator under microwaves is studied, and it is found that the electric-field components can provide a faster thermal response at the optimal length of actuator than magnetic-field components. The work of the parallel robot is demonstrated in an enclosed space composed of microwave-transparent materials. This developed method demonstrates the multi-degree-of-freedom controllability for robots using microwaves and offers potential solutions for some engineering cases, such as pipeline/reactors inspection and medical applications.

Photothermal Thin Films with Highly Efficient NIR Conversion for Miniaturized Liquid-Crystal Elastomer Actuators

This work presents the development of highly efficient photothermal thin films (PTFs) and the demonstration of their application on miniaturized polymer-based soft actuators. The proposed PTF, which comprises acrylic-based black paint and EGaIn liquid metal (LM) microdroplets, serves as an excellent absorber for efficiently converting near-infrared (NIR) irradiation into heat for actuating liquid-crystal elastomer (LCE) actuators. The introduction of LM microdroplets into the PTFs effectively increases the overall thermal efficiency of PTFs. Miniaturized soft crawlers monolithically integrated with the NIR-driven LCE actuators are also implemented for demonstrating the application of the proposed PTF. The crawler’s locomotion, which is inspired by the rectilinear movement of snakes, is generated with the proposed PTF for inducing the LC-to-isotropic phase transition of the LCEs. The experimental results show that introducing LM microdroplets into the PTF can effectively reduce the thermal time constants of LCE actuators by 70%. Under periodic on/off NIR illumination cycles, the locomotion of crawlers with different dimensions is also demonstrated. The measurement results indicate that the proposed PTF is not only essential for enabling photothermal LCE actuation but also quite efficient and durable for repeated operation.

Photothermal-Driven Liquid Crystal Elastomers: Materials, Alignment and Applications

Liquid crystal elastomers (LCEs) are programmable deformable materials that can respond to physical fields such as light, heat, and electricity. Photothermal-driven LCE has the advantages of accuracy and remote control and avoids the requirement of high photon energy for photochemistry. In this review, we discuss recent advances in photothermal LCE materials and investigate methods for mechanical alignment, external field alignment, and surface-induced alignment. Advances in the synthesis and orientation of LCEs have enabled liquid crystal elastomers to meet applications in optics, robotics, and more. The review concludes with a discussion of current challenges and research opportunities.

Electrically driven liquid crystal network actuators

Soft actuators based on liquid crystal networks (LCNs) have aroused great scientific interest for use as stimuli-controlled shape-changing and moving components for robotic devices due to their fast, large, programmable and solvent-free actuation responses. Recently, various LCN actuators have been implemented in soft robotics using stimulus sources such as heat, light, humidity and chemical reactions. Among them, electrically driven LCN actuators allow easy modulation and programming of the input electrical signals (amplitude, phase, and frequency) as well as stimulation throughout the volume, rendering them promising actuators for practical applications. Herein, the progress of electrically driven LCN actuators regarding their construction, actuation mechanisms, actuation performance, actuation programmability and the design strategies for intelligent systems is elucidated. We also discuss new robotic functions and advanced actuation control. Finally, an outlook is provided, highlighting the research challenges faced with this type of actuator.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Bistable and Multistable Actuators for Soft Robots: Structures, Materials, and Functionalities

Snap-through bistability is often observed in nature (e.g., fast snapping to closure of Venus flytrap) and the life (e.g., bottle caps and hair clippers). Recently, harnessing bistability and multistability in different structures and soft materials has attracted growing interest for high-performance soft actuators and soft robots. They have demonstrated broad and unique applications in high-speed locomotion on land and under water, adaptive sensing and fast grasping, shape reconfiguration, electronics-free controls with a single input, and logic computation. Here, an overview of integrating bistable and multistable structures with soft actuating materials for diverse soft actuators and soft/flexible robots is given. The mechanics-guided structural design principles for five categories of basic bistable elements from 1D to 3D (i.e., constrained beams, curved plates, dome shells, compliant mechanisms of linkages with flexible hinges and deformable origami, and balloon structures) are first presented, alongside brief discussions of typical soft actuating materials (i.e., fluidic elastomers and stimuli-responsive materials such as electro-, photo-, thermo-, magnetic-, and hydro-responsive polymers). Following that, integrating these soft materials with each category of bistable elements for soft bistable and multistable actuators and their diverse robotic applications are discussed. To conclude, perspectives on the challenges and opportunities in this emerging field are considered.

Fast-Response Bioinspired Near-Infrared Light-Driven Soft Robot Based on Two-Stage Deformation

Herein, we report a remotely controlled soft robot employing a photoresponsive nanocomposite synthesized from liquid crystal elastomers (LCEs), high elastic form-stable phase change polymer (HEPCP), and multiwalled carbon nanotubes (MWCNTs). Possessing a two-stage deformation upon exposure to near-infrared (NIR) light, the LCE/HEPCP/MWCNT (LHM) nanocomposite allows the soft robot to exhibit an obvious, fast, and reversible shape change with low detection limitations. In addition to the deformation and bending of the LCE molecular chains itself, the HEPCP in the composite material can also be triggered by a reversible solid-liquid transition due to the temperature rise caused by MWCNTs, which further promotes the change of the LCE. In particular, the proposed photodriven LHM soft robot can bend up to 180° in 2 s upon NIR stimulation (320 mW, distance of 5 cm) and generate recoverable, dramatic, and sensitive deformation to execute various tasks including walking, twisting, and bending. With the capacity of imitating biological behaviors through remote control, the disruptive innovation developed here offers a promising path toward miniaturized untethered robotic systems.

Localizable, Identifiable, and Perceptive Untethered Light-Driven Soft Crawling Robot

Soft robots based on bionics have attracted extensive attention in recent years. However, most of previous works focused on the motion of robots that were incapable of communication and perception. In this work, an untethered crawling robot is proposed with integration of motion, communication, and location based entirely on a flexible material, which is capable of being utilized as a sensing platform. The hydrophilic graphene oxide film, capable of photothermal conversion, allows the robot to undergo a large deformation stimulated by near-infrared light. Conductive fabric with low resistivity and high mechanical strength, replacing the traditional rigid circuit, is utilized to complete the communication of the robot. The designed communication module allows an electrical signal to be inductively coupled to the soft robot instead of being generated by batteries or through transmission lines. The perception of the robot is demonstrated by covering sensitive materials. Furthermore, the positioning and identification of the robot are verified by an external coil array. The proposed soft crawling robot provides an innovative strategy for the integration of multifunctional robots and shows great potential in bionic devices, intelligent robots, and advanced sensors.

4D Printing of Liquid Crystals: What's Right for Me?

Recent years have seen major advances in the developments of both additive manufacturing concepts and responsive materials. When combined as 4D printing, the process can lead to functional materials and devices for use in health, energy generation, sensing, and soft robots. Among responsive materials, liquid crystals, which can deliver programmed, reversible, rapid responses in both air and underwater, are a prime contender for additive manufacturing, given their ease of use and adaptability to many different applications. In this paper, selected works are compared and analyzed to come to a didactical overview of the liquid crystal-additive manufacturing junction. Reading from front to back gives the reader a comprehensive understanding of the options and challenges in the field, while researchers already experienced in either liquid crystals or additive manufacturing are encouraged to scan through the text to see how they can incorporate additive manufacturing or liquid crystals into their own work. The educational text is closed with proposals for future research in this crossover field.

Light-Fueled Polymer Film Capable of Directional Crawling, Friction-Controlled Climbing, and Self-Sustained Motion on a Human Hair

Recent efforts in stimuli-responsive soft materials have enabled wirelessly controlled actuation with increasing degrees of freedom, yielding miniature robots capable of various locomotion in open environments such as on a plane or inside fluids. However, grand challenges remain in harnessing photomechanical deformation to induce locomotion and control of friction during the movement, especially for robotic actuations within constrained spaces. Here, the authors report a centimeter-long polymer strip made of a liquid crystal network that is capable of versatile light-fueled motions along a human hair. The soft polymer robot can translocate directionally upon temporally modulated excitation and climb vertically through friction control with light. A self-oscillating strip is demonstrated to continuously translocate along the hair upon a constant light stimulus, and its gaiting is associated to the smoothness of the hair surface. The results offer new insights to small-scale photo-actuator, mechanical control, and automation in soft micro robotics.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

One-Pot Synthesis of Melt-Processable Supramolecular Soft Actuators

The application of reprocessable and reprogrammable soft actuators is limited by the synthetic strategies, 3D‐shaping capabilities, and small deformations. In this work, melt‐processable supramolecular soft actuators based on segmented copolymers containing thiourethane and liquid crystal segments have been prepared via sequential thiol addition reactions in a one‐pot approach using commercially available building blocks. The actuators demonstrated immediate, reversible response and weightlifting capabilities with large deformations up to 32 %. Through exploiting the supramolecular cross‐links, the material could be recycled and reprogrammed into 3D actuators and welded into an actuator assembly with different deformation modes. Our work offers a one‐pot synthesis and straightforward melt‐processable approach to prepare supramolecular soft actuators with large deformations that can be reprocessed and reprogrammed into arbitrary 3D shapes.

Numerical analysis and design of a light-driven liquid crystal polymer-based motorless miniature cart

Liquid crystal polymers are a special class of soft materials that can change their shape in response to numerous stimuli such as light, heat, electric field, and chemicals. The ability to tailor the deformed shape by tuning the alignment of mesogens across the film has enabled the researchers to generate unique motions from these liquid crystal polymer thin films. Simulating such motions might allow us to understand the underlying mechanisms better and could lead to novel designs. In this paper, we analyze the kinematics of the light-driven rolling motion of wheels fabricated with azobenzene-doped glassy liquid crystal networks through a one-way coupled transient photo-mechanical model. The influence of the isomerization parameters and the alignment of mesogens through the thickness on the kinematics of the wheel is presented. The developed model is further used to assess the feasibility of a light-actuated four-wheeled cart with wheels made of azobenzene-doped liquid crystal network thin films.

Hydrogen-Bonded Supramolecular Liquid Crystal Polymers: Smart Materials with Stimuli-Responsive, Self-Healing, and Recyclable Properties

Hydrogen-bonded liquid crystalline polymers have emerged as promising “smart” supramolecular functional materials with stimuli-responsive, self-healing, and recyclable properties. The hydrogen bonds can either be used as chemically responsive (i.e., pH-responsive) or as dynamic structural (i.e., temperature-responsive) moieties. Responsiveness can be manifested as changes in shape, color, or porosity and as selective binding. The liquid crystalline self-organization gives the materials their unique responsive nanostructures. Typically, the materials used for actuators or optical materials are constructed using linear calamitic (rod-shaped) hydrogen-bonded complexes, while nanoporous materials are constructed from either calamitic or discotic (disk-shaped) complexes. The dynamic structural character of the hydrogen bond moieties can be used to construct self-healing and recyclable supramolecular materials. In this review, recent findings are summarized, and potential future applications are discussed.

Smart Actuators Based on External Stimulus Response

Smart actuators refer to integrated devices that are composed of smart and artificial materials, and can provide actuation and dampening capabilities in response to single/multi external stimuli (such as light, heat, magnetism, electricity, humidity, and chemical reactions). Due to their capability of dynamically sensing and interaction with complex surroundings, smart actuators have attracted increasing attention in different application fields, such as artificial muscles, smart textiles, smart sensors, and soft robots. Among these intelligent material, functional hydrogels with fiber structure are of great value in the manufacture of smart actuators. In this review, we summarized the recent advances in stimuli-responsive actuators based on functional materials. We emphasized the important role of functional nano-material-based additives in the preparation of the stimulus response materials, then analyzed the driving response medium, the preparation method, and the performance of different stimuli responses in detail. In addition, some challenges and future prospects of smart actuators are reported.

NIR-vis-UV Light-Responsive High Stress-Generating Polymer Actuators with a Reduced Creep Rate

Untethered, light-responsive, high-stress-generating actuators based on widely-used commercial polymers are appealing for applications in soft robotics. However, the construction of actuators that are stable and reversibly responsive to low-intensity ultraviolet, visible, and infrared lights remains challenging. Here, transparent, stress-generating actuators are reported based on ultradrawn, ultrahigh molecular weight polyethylene films. The composite films have different draw ratios (30, 70, and 100) and contain a small amount of graphene in combination with ultraviolet and near-infrared-absorbing dyes. The composite actuators respond rapidly (t_0.9 < 0.8 s) to different wavelengths of light (i.e., 780, 455, and 365 nm). A maximum photoinduced stress of 35 MPa is achieved at a draw ratio of 70 under near-infrared light irradiation. The photoinduced stress increases linearly with the light intensity, indicating the transfer of light into thermally induced mechanical contraction. Moreover, the addition of additives lead to a reduction in the plastic creep rate of the drawn films compared to their nonmodified counterparts.

Beyond the Visible: Bioinspired Infrared Adaptive Materials

Infrared (IR) adaptation phenomena are ubiquitous in nature and biological systems. Taking inspiration from natural creatures, researchers have devoted extensive efforts for developing advanced IR adaptive materials and exploring their applications in areas of smart camouflage, thermal energy management, biomedical science, and many other IR-related technological fields. Herein, an up-to-date review is provided on the recent advancements of bioinspired IR adaptive materials and their promising applications. First an overview of IR adaptation in nature and advanced artificial IR technologies is presented. Recent endeavors are then introduced toward developing bioinspired adaptive materials for IR camouflage and IR radiative cooling. According to the Stefan-Boltzmann law, IR camouflage can be realized by either emissivity engineering or thermal cloaks. IR radiative cooling can maximize the thermal radiation of an object through an IR atmospheric transparency window, and thus holds great potential for use in energy-efficient green buildings and smart personal thermal management systems. Recent advances in bioinspired adaptive materials for emerging near-IR (NIR) applications are also discussed, including NIR-triggered biological technologies, NIR light-fueled soft robotics, and NIR light-driven supramolecular nanosystems. This review concludes with a perspective on the challenges and opportunities for the future development of bioinspired IR adaptive materials.

Desynchronized liquid crystalline network actuators with deformation reversal capability

Liquid crystalline network (LCN) actuator normally deforms upon thermally or optically induced order-disorder phase transition, switching once between two shapes (shape 1 in LC phase and shape 2 in isotropic state) for each stimulation on/off cycle. Herein, we report an LCN actuator that deforms from shape 1 to shape 2 and then reverses the deformation direction to form shape 3 on heating or under light only, thus completing the shape switch twice for one stimulation on/off cycle. The deformation reversal capability is obtained with a monolithic LCN actuator whose two sides are made to start deforming at different temperatures and exerting different reversible strains, by means of asymmetrical crosslinking and/or asymmetrical stretching. This desynchronized actuation strategy offers possibilities in developing light-fueled LCN soft robots. In particular, the multi-stage bidirectional shape change enables multimodal, light-driven locomotion from the same LCN actuator by simply varying the light on/off times.

Photochemically and Photothermally Controllable Liquid Crystalline Network and Soft Walkers

Developing intelligent soft robots capable to perform various responses to different stimulations has been a hot topic in recent years. Liquid crystalline networks (LCNs) have been considered as one of the most promising candidates in the fabrication of soft actuators because of the combination of elasticity of the polymer and anisotropy of the liquid crystals. However, the design and fabrication of advanced LCN materials with outstanding performances and multiple responsivities is highly demanded but still a challenge. In this work, a NIR-UV dual light-responsive LCN actuator was prepared by selectively coating a polydopamine (PDA) layer on an azobenzene-doped LCN film. This actuator presents UV responsivity in the uncoated region because of the photochemical isomerization of azobenzene and NIR sensitivity in the PDA-coated region originated from the striking photothermal effect. Thanks to the reprogrammable PDA coating, this dual-responsive LCN actuator was totally reprogrammable by coating and washing the PDA layer repeatedly. Based on the novel soft actuator, an artificial car that can imitate the switch of the "forward gear" to "neutral gear" of a real car was prepared. In normal mode, the actuator can move forward under NIR irradiation. After UV light excitation, the actuator cannot move under the same NIR irradiation, just like the car with the level in neutral. This novel actuator may provide inspirations for the fabrication of light-driven functional devices and soft actuators.

Recent Advances in Design and Actuation of Continuum Robots for Medical Applications

Traditional rigid robot application in the medical field is limited due to the limited degrees of freedom caused by their material and structure. Inspired by trunk, tentacles, and snakes, continuum robot (CR) could traverse confined space, manipulate objects in complex environment, and conform to curvilinear paths in space. The continuum robot has broad prospect in surgery due to its high dexterity, which can reach circuitous areas of the body and perform precision surgery. Recently, many efforts have been done by researchers to improve the design and actuation methods of continuum robots. Several continuum robots have been applied in clinic surgical interventions and demonstrated superiorities to conventional rigid-link robots. In this paper, we provide an overview of the current development of continuum robots, including the design principles, actuation methods, application prospect, limitations, and challenge. And we also provide perspective for the future development. We hope that with the development of material science, Engineering ethics, and manufacture technology, new methods can be applied to manufacture continuum robots for specific surgical procedures.

Light-Driven Continual Oscillatory Rocking of a Polymer Film

Achieving oscillatory motion in polymers without requiring on/off switching of stimuli is a current challenge. Hereby, a free-standing liquid crystal polymer (LCP) is demonstrated to undergo a sustained oscillatory motion when triggered by light, moving back and forth, resembling the motion of a rocking-chair. Two polymer films having different azobenzene photo-switches have been studied, revealing photoswitch requirements as well as illumination conditions necessary to sustain oscillations. The motion presented here shows how feedback loops involving light-triggered actuation, self-shadowing and a shifting center of gravity can be utilized to achieve self-sustained motion in free-standing polymers.

Wireless Walking Paper Robot Driven by Magnetic Polymer Actuator

Untethered small-scale soft robots have been widely researched because they can be employed to perform wireless procedures via natural orifices in the human body, or other minimally invasive operations. Nevertheless, achieving untethered robotic motion remains challenging owing to the lack of an effective wireless actuation mechanism. To overcome this limitation, we propose a magnetically actuated walking soft robot based on paper and a chained magnetic-microparticle-embedded polymer actuator. The magnetic polymer actuator was prepared by combining Fe3O4 magnetic particles (MPs, diameter of ~50 nm) and silicon that are affected by a magnetic field; thereafter, the magnetic properties were quantified to achieve proper force and optimized according to the mass ratio, viscosity, and rotational speed of a spin coater. The fabricated polymer was utilized as a soft robot actuator that can be controlled using an external magnetic field, and paper was employed to construct the robot body with legs to achieve walking motion. To confirm the feasibility of the designed robot, the operating capability of the robot was analyzed through finite element simulation, and a walking experiment was conducted using electromagnetic actuation. The soft robot could be moved by varying the magnetic flux density and on–off state, and it demonstrated a maximum moving speed of 0.77 mm/s. Further studies on the proposed soft walking robot may advance the development of small-scale robots with diagnostic and therapeutic functionalities for application in biomedical fields.

Bioinspired light-driven soft robots based on liquid crystal polymers

Nature is a constant source of inspiration for materials scientists, fueling the dream of mimicking life-like motion and tasks in untethered, man-made devices. Liquid crystalline polymers (LCPs) programmed to undergo three-dimensional shape changes in response to light are promising materials for fulfilling this dream. The successful development of autonomous, highly controlled light-driven soft robots calls for an understanding of light-driven actuation, advancements in material function and performance, and progress in engineering principles for transforming actuation into life-like motions, from simple bending to walking, for example. This tutorial review includes an introduction to liquid crystal (LC)-based materials and highlights developments in light-responsive LC polymers, shape programmability and sustained motions to finally achieve bioinspired untethered soft robots able to perform locomotion and tasks.

An artificial aquatic polyp that wirelessly attracts, grasps, and releases objects

The development of light-responsive materials has captured scientific attention and advanced the development of wirelessly driven terrestrial soft robots. Marine organisms trigger inspiration to expand the paradigm of untethered soft robotics into aqueous environments. However, this expansion toward aquatic soft robots is hampered by the slow response of most light-driven polymers to low light intensities and by the lack of controlled multishape deformations. Herein, we present a surface-anchored artificial aquatic coral polyp composed of a magnetically driven stem and a light-driven gripper. Through magnetically driven motion, the polyp induces stirring and attracts suspended targets. The light-responsive gripper is sensitive to low light intensities and has programmable states and rapid and highly controlled actuation, allowing the polyp to capture or release targets on demand. The artificial polyp demonstrates that assemblies of stimuli-responsive materials in water utilizing coordinated motion can perform tasks not possible for single-component devices.

Design principles for non-reciprocal photomechanical actuation

Non-reciprocal motions are a sequence of movements exhibiting time-reversal asymmetry. Such movements are common among various natural species, being adopted as a typical strategy for achieving efficient locomotion. Generally, the realization of non-reciprocal motions in man-made robotic devices requires synchronous control of at least two individual actuators, hence posing challenges to soft micro-robotics where the miniaturization limits integration of different mechanical components and the possibility of using onboard batteries. Here, we introduce general concepts for achieving non-reciprocal movements in wirelessly controlled soft actuators made of photomechanically responsive liquid crystal networks. The monolithic actuators are composed of two segments that can be actuated photochemically and photothermally, and the non-reciprocal motion is obtained by a control sequence that temporally modulates light sources of different wavelengths. Through proper selection of photoactive compounds, the number of modulated light sources can be decreased, from three to two, and eventually to one. Finally, we demonstrate non-reciprocal self-oscillation by self-shadowing effect in a flexible strip under a constant light field with no temporal modulation. This study provides general guidelines to light-controlled non-reciprocal actuation, offering new strategies for the control of wireless soft micro-robotics.