Transition‐Metal‐Free Synthesis of Functionalized Quinolines by Direct Conversion of β‐O‐4 Model Compounds

Sustainable production of triazoles from lignin major motifs

An efficiently catalyzed synthesis of pharmaceutically relevant 1,2,3-trazoles from renewable resources is highly desirable. However, due to incompatible catalysis conditions, this endeavor remained challenging so far. Herein, a practical access protocol to 1,2,3-triazoles, starting from lignin phenolic β-O-4 with γ-OH group utilizing a vanadium-based catalyst is presented. A broad substrate scope reaching up to 97 % yield of 1,2,3-triazoles are obtained. The reaction pathway includes selective cleavage of double C-O bonds, cycloaddition, and dehydrogenation. Mechanistic studies and density-functional theory (DFT) calculations suggest that the V-based complex acts as a bifunctional catalyst for both selective C-O bonds cleavage and dehydrogenation. This synthetic pathway has been applied for the synthesis of pharmacological and biological active carbohydrate derivatives starting from biomass components as feedstock, enabling a potential sustainable route to triazolyl carbohydrate derivatives, which paves the way for lignin-based heterocyclic aromatics in the pharmaceutical applications.

Production of Oximes Directly from Sustainable Lignocellulose-Derived Aldehydes and Ammonia over HTS-1 Catalyst

Oxime chemicals are the building blocks of many anticancer drugs and widely used in industry and laboratory. A simple but robust hierarchically porous zeolite (HTS-1) catalyst was prepared by hydrothermal methods and used for the preparation of vanillin oxime from vanillin in NH3  ⋅ H2 O/DIO (v/v 1/10) system. The results of the catalyst characterization showed that the larger pore size and more framework Ti were conducive to promote the transformation of the substrates. The conversion of vanillin and the yield of vanillin oxime were both higher than 99 % under optimized reaction conditions. It was found that the reaction proceeded by oxidation of NH3 to hydroxylamine (NH2 OH), and oximation of hydroxylamine with vanillin to obtain vanillin oxime, where the rate-controlling step was the hydroxylamine formation, and the apparent activation energy was 26.22 kJ/mol. The corresponding oximation products could also be obtained by extending this method to other compounds derived from lignin. Furthermore, the catalytic system was used directly to the conversion of birch biomass to obtain oxime products such as vanillin oxime, syringaldehyde oxime, and furfural oxime etc. This work might give insights into the sustainable production of N-containing high-value products from lignocellulose.

Photocatalytic Conversion of Lignin Models into Functionalized Aromatic Molecules Initiated by the Proton-Coupled Electron Transfer Process

A mild and efficient method for lignin β-O-4 cleavage and functionalization was achieved via photocatalysis. This protocol exhibits a broad scope of lignin models and excellent compatibility of functionalization reagents, constructing a series of functionalized lignin-based aromatic compounds. Highly selective formation of alkyl radical species through a proton-coupled electron transfer and β-scission process provides the opportunity to form new C-C and C-N bonds by reaction with electrophilic reagents.

Aqueous amine enables sustainable monosaccharide, monophenol, and pyridine base coproduction in lignocellulosic biorefineries

Thought-out utilization of entire lignocellulose is of great importance to achieving sustainable and cost-effective biorefineries. However, there is a trade-off between efficient carbohydrate utilization and lignin-to-chemical conversion yield. Here, we fractionate corn stover into a carbohydrate fraction with high enzymatic digestibility and reactive lignin with satisfactory catalytic depolymerization activity using a mild high-solid process with aqueous diethylamine (DEA). During the fractionation, in situ amination of lignin achieves extensive delignification, effective lignin stabilization, and dramatically reduced nonproductive adsorption of cellulase on the substrate. Furthermore, by designing a tandem fractionation-hydrogenolysis strategy, the dissolved lignin is depolymerized and aminated simultaneously to co-produce monophenolics and pyridine bases. The process represents the viable scheme of transforming real lignin into pyridine bases in high yield, resulting from the reactions between cleaved lignin side chains and amines. This work opens a promising approach to the efficient valorization of lignocellulose.

Photoredox radical cyclization reaction of o-vinylaryl isocyanides with acyl chlorides to access 2,4-disubstituted quinolines

We herein report an efficient photoredox radical cyclization reaction of o-vinylaryl isocyanides with acyl chlorides to access a wide range of 2,4-disubstituted quinolines. Preliminary mechanism experiment results suggested that this reaction was initiated by an acyl radical generated from acyl chlorides through a single-electron-transfer (SET) process. This transformation showed good substrate suitability and functional group compatibility at room temperature.

Aerobic oxidative C-C bond cleavage and functionalization for the synthesis of value-added chemicals

The aerobic oxidative cleavage of C-C bonds is an attractive and sustainable route for constructing valuable molecules such as esters, nitriles, and amides. Traditionally homogeneous catalytic systems for C-C bond cleavage required harsh conditions, stoichiometric oxidants, and noble metal catalysts to overcome the thermodynamic and kinetic barriers of C-C bonds, imposing environmental concerns of the transformation. Therefore, developing efficient, low-cost, and environmentally benign methods for C-C bond cleavage is of great importance and a cutting-edge area in modern chemistry. This feature article summarizes the sustainable aerobic oxidative C-C bond cleavage method developed by our group in the past 5 years. Fundamental principles in catalyst design, substrate scope, and mechanism for C-C bond cleavage are also discussed.

Towards bioresource-based aggregation-induced emission luminogens from lignin β-O-4 motifs as renewable resources

One-pot synthesis of heterocyclic aromatics with good optical properties from phenolic β-O-4 lignin segments is of high importance to meet high value added biorefinery demands. However, executing this process remains a huge challenge due to the incompatible reaction conditions of the depolymerization of lignin β-O-4 segments containing γ-OH functionalities and bioresource-based aggregation-induced emission luminogens (BioAIEgens) formation with the desired properties. In this work, benzannulation reactions starting from lignin β-O-4 moieties with 3-alkenylated indoles catalyzed by vanadium-based complexes have been successfully developed, affording a wide range of functionalized carbazoles with up to 92% yield. Experiments and density functional theory calculations suggest that the reaction pathway involves the selective cleavage of double C-O bonds/Diels-Alder cycloaddition/dehydrogenative aromatization. Photophysical investigations show that these carbazole products represent a class of BioAIEgens with twisted intramolecular charge transfer. Distinctions of emission behavior were revealed based on unique acceptor-donor-acceptor-type molecular conformations as well as molecular packings. This work features lignin β-O-4 motifs with γ-OH functionalities as renewable substrates, without the need to apply external oxidant/reductant systems. Here, we show a concise and sustainable route to functional carbazoles with AIE properties, building a bridge between lignin and BioAIE materials.

Bioconversion of Homogeneous Linear C-Lignin to Polyhydroxyalkanoates

The bioconversion of homogeneous linear catechyl lignin (C-lignin) to polyhydroxyalkanoates (PHA) was examined for the first time in this study. C-lignins from vanilla, euphorbia, and candlenut seed coats (denoted as C1, C2, and C3, respectively) varied in their molecular structures, which showed different molecular weight distributions, etherification degrees, and contents of hydroxyl groups. A notable amount of nonetherified catechol units existed within C1 and C2 lignins, and these catechol units were consumed during fermentation. These results suggested that the nonetherified catechol structure was readily converted by Pseudomonas putida KT2440. Since the weight-average molecular weight of C2 raw lignin was 26.7% lower than that of C1, the bioconversion performance of C2 lignin was more outstanding. The P. putida KT2440 cell amount reached the maximum of 9.3 × 107 CFU/mL in the C2 medium, which was 37.9 and 82.4% higher than that in the C1 and C3 medium, respectively. Accordingly, PHA concentration reached 137 mg/L within the C2 medium, which was 41.2 and 149.1% higher than the C1 and C3 medium, respectively. Overall, C-lignin, with a nonetherified catechol structure and low molecular weight, benefits its microbial conversion significantly.

Robust Vanillin-Derived Poly(thioether imidazoles) as Both a Latent Curing and Toughening Agent for One-Component Epoxy Resins

One-component epoxy resins based on latent curing agents have garnered research attention owing to their outstanding storage stability and excellent processability, while their development considerably depends on the design and preparation of sustainable latent curing agents. Herein, taking structural advantage of lignin-derived vanillin, a biobased polymerizable aromatic imidazole monomer with α,ω-diene functionality was designed and prepared, which was applicable in subsequent thiol-ene polymerization, yielding a series of robust poly(thioether imidazoles) with excellent tunability of the structure and properties. The findings indicated that the precursors comprising poly(thioether imidazole) and commercially available epoxy resins could keep their fluidity at 25 °C for over 90 days and rapidly cured into resins under elevated temperature, demonstrating that the poly(thioether imidazole) can serve as both a latent curing and toughening agent for one-component epoxy resins because of homopolymerization initiated by imidazole groups and the introduction of an aliphatic chain in the as-prepared poly(thioether imidazole) matrix.

Imidazo[1,2-a]pyridine derivatives synthesis from lignin β-O-4 segments via a one-pot multicomponent reaction

The catalytic conversion of lignin into N-containing chemicals is of great significance for the realization of value-added biorefinery concept. In this article, a one-pot strategy was designed for the transformation of lignin β-O-4 model compounds to imidazo[1,2-a]pyridines in yields up to 95% using 2-aminopyridine as a nitrogen source. This transformation involves highly coupled cleavage of C-O bonds, sp³C-H bond oxidative activation, and intramolecular dehydrative coupling reaction to construction of N-heterobicyclic ring. With this protocol, a wide range of functionalized imidazo[1,2-a]pyridines sharing the same structure skeleton as those commercial drug molecules, such as Zolimidine, Alpidem, Saripidem, etc., were synthesized from different lignin β-O-4 model compounds and one β-O-4 polymer, emphasizing the application feasibility of lignin derivatives in N-heterobicyclic pharmaceutical synthesis.