Stress–thermal oxidative aging behavior of hydrogenated nitrile rubber seals

Synergistic Effects of Multiple Environmental Factors on Degradation of Silicone Rubber Seals under Marine Atmosphere

In this research, the degradation behavior and failure mechanism of silicone rubber seal rings under the synergistic effects of multiple factors in the marine atmosphere are fully investigated. Firstly, four aging factors of air, temperature, compressive stress, and chemical medium were determined by analyzing the service environment profile of silicone rubber seal under a marine atmosphere environment. Secondly, to better simulate the actual service environment of silicone rubber and shorten the test period, an artificially accelerated aging test was designed and carried out in the laboratory. In this paper, temperature is utilized as the accelerating stress. According to the results of the pre-test, the accelerating stress level is finally determined to be 110-150 ∘C. In addition, the compression set applied is consistent with the constant compression permanent deformation value of 28% of the silicone rubber in the actual service process. Finally, through the macroscopic physical properties and microstructure analysis of the samples before and after aging, the corresponding test results are given, and the failure mechanism is analyzed and discussed in detail. Through the above test results and discussion, it can be concluded that the aging process of multi-factor coupling on the lower silicone rubber seal ring is uneven, and its aging process is not a simple superposition of multiple environmental factors. More importantly, the above test data and results are of great significance for evaluating the service life of silicone rubber seals, which can be utilized in the future to improve the reliability and durability of related equipment in the marine environment.

Molecular Dynamics Simulation of Oxidative Aging Effect on Diffusion Behaviors of Oxygen and Cyclohexane in NBR

The influences of thermal-oxidative aging on the diffusion behaviors of oxygen and cyclohexane in nitrile-butadiene rubber (NBR) at the micro-scale were investigated by molecular dynamics (MD) simulation. The two types of aged rubber models were established on the basis of rubber oxidative chains modified by the introduction of hydroxyl groups and carbonyl groups in rubber chains. The diffusion behaviors of oxygen and cyclohexane in NBR under different conditions were characterized by the fractional free volume (FFV), mean square displacement (MSD), diffusion coefficients, and diffusion trajectory. It turns out that the elevated temperature contributed to the increase in the free volume and diffusion range of oxygen and cyclohexane, while the compressive stress showed the reverse influence. Additionally, the introduction of oxidative polar functional groups (hydroxyl groups and carbonyl groups) in rubber chains lowered the flexibility of the rubber chains and promoted the formation of strong polar interaction, which further inhibits the diffusion of oxygen and cyclohexane.

Molecule Dynamics Simulation of the Effect of Oxidative Aging on Properties of Nitrile Rubber

The effects of oxidative aging on the static and dynamic properties of nitrile rubber at the molecular scale were investigated by molecular dynamics simulation. The aged nitrile rubber models were constructed by introducing hydroxyl groups and carbonyl groups into rubber molecular chains to mimic oxidative aging. The static and dynamic properties of the unaged and aged nitrile rubber under different conditions were evaluated by mean square displacement, self-diffusion coefficients, hydrogen bond, fractional free volume, radial distribution function, cohesive energy density and solubility parameter. The results show that the elevated temperature intensified significantly the mobility of rubber molecular chains and fractional free volume, while the compressive strain displayed the opposite effect resulting in packing and rearrangement of rubber chains. The introduction of hydroxyl groups and carbonyl groups enhanced the polarity, intermolecular interactions, the volume and rigidity of molecular chains, implying weaker mobility of molecular chains as compared to unaged models. The compressive strain and oxidative aging both decreased the fractional free volume, which inhibited gaseous and liquid diffusion into the rubber materials, and slowed down the oxidative aging rate. This study provides insights to better understand the effect of molecular changes due to oxidative aging on the structural and dynamic properties of rubber materials at the molecular level.

Compressive Fatigue Behavior of Gum and Filled SBR Vulcanizates

The influence of carbon black on physical mechanical properties, compressive fatigue life, and the temperature changes during compression fatigue process of styrene-butadiene rubber (SBR) vulcanizates were explored. A series of unfilled and filled SBR compounds were prepared, and the compressive fatigue behaviors of the vulcanizates were performed on a mechanical testing and simulation (MTS) machine. The top surfaces of the filled SBR were imaged using scanning electron microscopy (SEM) after 105 cycles of compressive fatigue. The filled SBR shows greater compressive fatigue resistance than the unfilled SBR. The incorporation of carbon black into SBR improves the creep resistance. The best compressive fatigue resistance for the filled SBR was achieved by the addition of 30 phr carbon black. With the increase of carbon black content, the energy dissipation and the heat build-up increase simultaneously. Furthermore, SEM images of the vulcanizates suggest that the crack propagation mechanism of the unfilled and the filled SBR was different. For the unfilled SBR, due to periodical compressive stress, the polymer chains can be destroyed, and the cracks can be easily initiated and propagated, showing serious damage on the top surfaces of the specimen. However, for the filled SBR, the carbon black agglomeration around the cracks can greatly delay the generation of the cracks, decrease the fatigue damage, and ultimately improve the fatigue resistance.

Analysis of O-Ring Seal Failure under Static Conditions and Determination of End-of-Lifetime Criterion

Determining a suitable and reliable end-of-lifetime criterion for O-ring seals is an important issue for long-term seal applications. Therefore, seal failure of ethylene propylene diene rubber (EPDM) and hydrogenated nitrile butadiene rubber (HNBR) O-rings aged in the compressed state at 125 °C and at 150 °C for up to 1.5 years was analyzed and investigated under static conditions, using both non-lubricated and lubricated seals. Changes of the material properties were analyzed with dynamic-mechanical analysis and permeability experiments. Indenter modulus measurements were used to investigate DLO effects. It became clear that O-rings can remain leak-tight under static conditions even when material properties have already degraded considerably, especially when adhesion effects are encountered. As a feasible and reliable end-of-lifetime criterion for O-ring seals under static conditions should include a safety margin for slight dimensional changes, a modified leakage test involving a small and rapid partial decompression of the seal was introduced that enabled determining a more realistic but still conservative end-of-lifetime criterion for an EPDM seal.