Mesoporous Silicate MCM-41 as a Particulate Carrier for Octyl Methoxycinnamate: Sunscreen Release and Photostability

Exposure to UV-B filter octylmethoxycinnamate and human health effects: Focus on endocrine disruptor actions

Human skin is the first line of photoprotection against UV radiation. However, despite having its defence mechanisms, the photoprotection that the skin exerts is not enough. To protect human skin, the inclusion of UV filters in the cosmetic industry has grown significantly as a photoprotection strategy. Octylmethoxycinnamate, also designated by octinoxate, or 2-ethylhexyl-4-methoxycinnamate (CAS number: 5466-77-3) is one of the most widely used UV-B filter in the cosmetic industry. The toxic effects of OMC have alarmed the public, but there is still no consensus in the scientific community about its use. This article aims to provide an overview of the UV filters' photoprotection, emphasizing the OMC and the possible negative effects it may have on the public health. Moreover, the current legislation will be addressed. In summary, the recommendations should be rethought to assess their risk-benefit, since the existing literature warns us to endocrine-disrupting effects of OMC. Further studies should be focus on the toxicity of OMC alone, in mixture and should consider its degradation products, to improve the knowledge of its risk assessment as EDC.

UV Filters: Challenges and Prospects

The use of sunscreens is an established and recommended practice to protect skin from solar-induced damage. Around 30 UV filters can be used in sunscreen products in the European Union, which ought to follow the requirements of the regulation 1223/2009 to ensure their efficacy and safety for humans. Nevertheless, low photostability and putative toxicity for humans and environment have been reported for some UV filters. Particularly, the negative impact in marine organisms has recently raised concern on the scientific community. Therefore, it is important to develop new UV filters with improved safety profile and photostability. Over the last two decades, nearly 200 new compounds have revealed promising photoprotection properties. The explored compounds were obtained through different approaches, including exploration of natural sources, synthetic pathways, and nanotechnology. Almost 50 natural products and around 140 synthetic derivatives, such as benzimidazoles, benzotriazoles, hydroxycinnamic acids, xanthones, triazines, among others, have been studied aiming the discovery of novel, effective, and safer future photoprotective agents. Herein, we provide the reader with an overview about UV filters’ challenges and prospects, offering a forward-looking to the next-generation of UV filters.

Exploiting Food-Grade Mesoporous Silica to Preserve the Antioxidant Properties of Fresh Olive Mill Wastewaters Phenolic Extracts

Fresh olive mill wastewaters phenolic extracts are of great interest as preservatives or fortifying ingredients but are characterized by limited stability. The purpose of this study was to use mesoporous silica to enhance their stability and preserve their antioxidant properties. The phenolic extracts were characterized for their composition by HPLC-DAD and included in a mesoporous matrix with or without a lipid coating. The inclusion complexes were characterized in terms of total phenolic content, radical scavenging capacity and in vitro antioxidative activity and cell compatibility. Besides, inclusion complex stability under different storage conditions (22 and 37 °C, 75% relative humidity, 1 month) was evaluated. The inclusion process was nearly quantitative and modified neither the total phenolic content nor the total antioxidant capacity. None of the inclusion complex concentrations assayed on the HT29 cell line showed toxicity. Moreover, HT29 cells treated with the inclusion complex exhibited a significant antioxidant effect, while the lipid coating impaired the antioxidant activity. The complexes without lipid were stable under all the investigated conditions, while the lipid-coated products were less stable under the more drastic conditions. Overall, inclusion complexes in mesoporous silica have suitable characteristics to be used for different applications, including food supplementation.

Current Advances of Nanocarrier Technology-Based Active Cosmetic Ingredients for Beauty Applications

Nanocarrier technology has been effectively applied to the development of drug delivery systems to overcome the limitations of traditional preparation. Its application has been extended to various pharmaceutical fields from injection preparation to oral preparation and external preparation, and now it has appeared in the field of cosmetics for beauty applications. The widespread influence of nanocarrier in the cosmetics industry is due to the fact that nanocarrier can effectively promote the percutaneous penetration and significantly increase skin retention of active components in functional cosmetics. Meanwhile, nanocarrier can effectively improve the water dispersion of insoluble active cosmetic ingredients, enhance the stability of efficacy components and achieve the codelivery of diverse cosmetics active ingredients. In this review, we summarized the current progress of nanocarrier technology in the functional cosmetics, including the types and the routes of dermal/transdermal drug delivery nanocarriers used in the functional cosmetics, the mechanism of nanocarriers promoting the percutaneous penetration of active cosmetic ingredients, the application and efficacy evaluation of different active cosmetic ingredients in nanocarriers and discussing the potential risks to human. This will provide a useful reference for the further development of nanocarriers in the field of functional cosmetics.

A post-HF approach to the sunscreen octyl methoxycinnamate

Octyl methoxycinnamate (2-ethylhexyl 4-methoxycinnamate, OMC) is a commercial sunscreen known as octinoxate with excellent UVB filter properties. However, it is known to undergo a series of photodegradation processes that decrease its effectiveness as a UVB filter. In particular, the trans (E) form-which is considered so far as the most stable isomer-converts to the cis (Z) form under the effect of light. In this work, by using post-Hartree-Fock approaches [CCSD, CCSD(t), and CCSD + T(CCSD)] on ground state OMC geometries optimized at the MP2 level, we show that the cis and trans forms of the gas-phase OMC molecule have comparable stability. Test calculations on the same structures with a series of dispersion-corrected density functional theory-based approaches including the B2PLYP double hybrid predict the trans structures to be energetically favored, missing the subtle stabilization of cis-OMC. Our results suggest that the cis form is stabilized by intra-molecular dispersion interactions, leading to a folded more compact structure than the trans isomer.

Sunscreens and their usefulness: have we made any progress in the last two decades?

Sunscreens have now been around for decades to mitigate the Sun's damaging ultraviolet (UV) radiation which, although essential for the existence of life, is a recognized prime carcinogen. Accordingly, have suncreams achieved their intended purposes towards protection against sunburns, skin photo-ageing and the like? Most importantly, however, have they provided the expected protection against skin cancers that current sunscreen products claim to do? In the last two decades, there have been tens, if not hundreds of studies on sunscreens with respect to skin protection against UVB (280‒320 nm)-traditionally sunscreens with rather low sun protection factors (SPF) were intended to protect against this type of radiation-and UVA (320‒400 nm) radiation; a distinction between SPF and UVA protection factor (UVA-PF) is made. Many of the studies of the last two decades have focused on protection against the more skin-penetrating UVA radiation. This non-exhaustive article reviews some of the important facets of what is currently known about sunscreens with regard (i) to the physical UV filters titanium dioxide (TiO₂) and zinc oxide (ZnO) and the mostly photo-unstable chemical UVB/UVA filters (e.g., octinoxate (OMC) and avobenzone (AVO), among others), (ii) to novel chemical sunscreen agents, (iii) to means that minimize the breakdown of chemical filters and improve their stability when exposed to UV sunlight, (iv) to SPF factors, and (v) to a short discussion on non-melanoma skin cancers and melanoma. Importantly, throughout the article we allude to the safety aspects of sunscreens and at the end ask the question: do active ingredients in sunscreen products pose a risk to human health, and what else can be done to enhance protection? Significant loss of skin protection from two well-known commercial suncreams when exposed to simulated UV sunlight. Cream I: titanium dioxide, ethylhexyl triazone, avobenzone, and octinoxate; Cream II: octyl salicylate, oxybenzone, avobenzone, and octinoxate.

Unplanned absorption of sunscreen ingredients: Impact of formulation and evaluation methods

Permeation of sunscreens agents reduces its effectiveness and safety, leading to systemic circulation and causing unknown adverse effects. In order to maintain the sunscreen efficacy and safety, the filters must stay on the skin surface, with minimum penetration through dermis. Even facing the possibility of filters permeation, the use of sunscreen is important to avoid skin damage as erythema, free-radicals formation, skin ageing and skin cancer, caused by ultraviolet radiation. Aiming potential side effects caused by topical absorption of sunscreens, studies are carried to improve formulation characteristics and stability, reduce skin permeation and evaluate sun protections factor (SPF). Current assays to detect the permeation of sunscreens involve in vivo or in vitro studies, to simulate physiological conditions of use. The aim of this review is to revisit sunscreen skin permeation data over the last decade and the factors that can enhance skin permeation or improve the sunscreen efficacy.

Mesoporous Silica Platforms with Potential Applications in Release and Adsorption of Active Agents

In recent years, researchers focused their attention on mesoporous silica nanoparticles (MSNs) owing to the considerable advancements of the characterization methods, especially electron microscopy methods, which allowed for a clear visualization of the pore structure and the materials encapsulated within the pores, along with the X-ray diffraction (small angles) methods and specific surface area determination by Brunauer–Emmett–Teller (BET) technique. Mesoporous silica gained important consideration in biomedical applications thanks to its tunable pore size, high surface area, surface functionalization possibility, chemical stability, and pore nature. Specifically, the nature of the pores allows for the encapsulation and release of anti-cancer drugs into tumor tissues, which makes MSN ideal candidates as drug delivery carriers in cancer treatment. Moreover, the inner and outer surfaces of the MSN provide a platform for further functionalization approaches that could enhance the adsorption of the drug within the silica network and the selective targeting and controlled release to the desired site. Additionally, stimuli-responsive mesoporous silica systems are being used as mediators in cancer therapy, and through the release of the therapeutic agents hosted inside the pores under the action of specific triggering factors, it can selectively deliver them into tumor tissues. Another important application of the mesoporous silica nanomaterials is related to its ability to extract different hazardous species from aqueous media, some of these agents being antibiotics, pesticides, or anti-tumor agents. The purpose of this paper is to analyze the methods of MSN synthesis and related characteristics, the available surface functionalization strategies, and the most important applications of MSN in adsorption as well as release studies. Owing to the increasing antibiotic resistance, the need for developing materials for antibiotic removal from wastewaters is important and mesoporous materials already proved remarkable performances in environmental applications, including removal or even degradation of hazardous agents such as antibiotics and pesticides.

Using ordered mesoporous silica SBA-15 to limit cutaneous penetration and transdermal permeation of organic UV filters

Avobenzone (AVO), oxybenzone (OXY), and octyl methoxycinnamate (OMC), are widely used UV filters. The aim of this study was to investigate the effect of incorporation in mesoporous silica (SBA-15) on their cutaneous deposition and permeation. Stick formulations containing "free" and "incorporated" UV filters (SF1 and SF2, respectively) were prepared and characterized with respect to their physicochemical, thermal, and functional properties. Cutaneous delivery experiments using porcine skin with quantification by UHPLC-MS/MS, demonstrated that skin deposition of AVO and OXY after application of SF2 for 6 and 12 h was significantly lower than that from SF1 at each time-point (Student t-test, p < 0.05): e.g. OXY permeation across the skin was 30-, 12- and 1.5-fold lower after 6, 12 and 24 h, respectively, following application of SF2. Cutaneous biodistribution profiles of AVO and OXY to 800 µm evidenced a significant decrease in the amounts in the viable epidermis and dermis. In contrast, deposition of the more lipophilic OMC was not significantly different (p ˃ 0.05). In vitro photoprotective efficacy results demonstrated that adsorption/entrapment of UV filters enhanced the sun protection factor by 94%. In conclusion, SBA-15, an innovative mesoporous material, increased photoprotection by UV filters while reducing their cutaneous penetration and transdermal permeation.

Silica-based nanosystems for therapeutic applications in the skin

Aging, exposure to oxidants, infectious pathogens, inflammogens, ultraviolet radiation and other environmental and genetic factors can result in the development of various skin disorders. Despite immense progress being made in dermatological treatments, many skin-associated problems still remain difficult to treat and various therapies have limitations. Progress in silica-based nanomaterials research provides an opportunity to overcome these drawbacks and improve therapies and is a promising tool for inclusion in clinical practice to treat skin diseases. This review focuses on the use of various types of silica nanoparticles with therapeutic applications in various skin disorders. These nanosystems improve treatment efficacy by maintaining or enhancing the effect of several drugs and are useful tools for nanomedicine, pharmaceutical sciences and future clinical applications.

Mesoporous Silica and Organosilica Nanomaterials as UV-Blocking Agents

Mesoporous silica nanoparticles (MSN) and periodic mesoporous organosilica nanoparticles containing bridging benzene (PMOBTB) and ethane (PMOBTE) moieties are synthesized, characterized, and evaluated for application in skin protection from UVA/UVB sun irradiation. Furthermore, the influence of surface functionalization with chelating 3-(2-aminoethylamino)propylsilane and Zn²⁺ ions on the UV-blocking ability of MSN is evaluated, along with the photostability and capability of the synthesized nanomaterials to carry avobenzone, a known UV-absorbing agent. The obtained results reveal promising characteristics of MSN and PMO materials with regard to their potential for sunscreen applications, which could be beneficial in terms of alleviating concerns about health and environmental hazards of sunscreen ingredients.

Development of Octyl Methoxy Cinnamates (OMC)/Silicon Dioxide (SiO₂) Nanoparticles by Sol-Gel Emulsion Method

Although octyl methoxy cinnamates (OMC) is the most used Ultraviolet B (UVB) filter in sunscreen, it has poor light stability in emulsion system. In this study, OMC/SiO₂ nanoparticles were prepared via sol-gel emulsion method. Tetraethoxy silane (TEOS) was used as the silica source to encapsulate OMC. Modification of experimental parameters such as stirring speed of condensation reaction and emulsion condition, pH value of acid-catalyzed, surfactant and different percentage of TEOS and OMC, adding of OMC and surfactant to different phase may affect the particle size, and yield and entrapment efficiency in preparation process of OMC/SiO₂ nanoparticles. Concluding all the parameter, we found that when condensation reaction and emulsion conditions are at 1000 rpm, pH 1.5, Span 80/Tween 20, TEOS/OMC ratios 1:1, OMC and surfactants added in oil phase, resulting in smaller particle sizes 476.5 nm, higher yield 95.8%, and higher entrapment efficiency 61.09%. Fourier transform infrared (FTIR) analysis demonstrated that OMC/SiO₂ nanoparticles were successfully prepared. In vitro release profile supposed that OMC/SiO₂ nanoparticles can delay OMC releasing and had 60.83% decreasing of cumulative amount. Therefore, the OMC/SiO₂ nanoparticles have the potential to develop as new sunscreen materials in the use for cosmetics field in the future.

A Perspective on the Ultrafast Photochemistry of Solution-Phase Sunscreen Molecules

Sunscreens are one of the most common ways of providing on-demand additional photoprotection to the skin. Ultrafast transient absorption spectroscopy has recently proven to be an invaluable tool in understanding how the components of commercial sunscreen products display efficient photoprotection. Important examples of how this technique has unravelled the photodynamics of common components are given in this Perspective, and some of the remaining unanswered questions are discussed.

Confinement of Amorphous Lactose in Pores Formed Upon Co-Spray Drying With Nanoparticles

This study aims at investigating factors influencing humidity-induced recrystallization of amorphous lactose, produced by co-spray drying with particles of cellulose nanocrystals or sodium montmorillonite. In particular, the focus is on how the nanoparticle shape and surface properties influence the nanometer to micrometer length scale nanofiller arrangement in the nanocomposites and how the arrangements influence the mechanisms involved in the inhibition of the amorphous to crystalline transition. The nanocomposites were produced by co-spray drying. Solid-state transformations were analyzed at 60%-94% relative humidity using X-ray powder diffraction, microcalorimetry, and light microscopy. The recrystallization rate constant for the lactose/cellulose nanocrystals and lactose/sodium montmorillonite nanocomposites was lowered at nanofiller contents higher than 60% and was stable for months at 80% nanofiller. The most likely explanation to these results is spontaneous formations of mesoporous particle networks that the lactose is confined upon co-spray drying at high filler content. Compartmentalization and rigidification of the amorphous lactose proved to be less important mechanisms involved in the stabilization of lactose in the nanocomposites.

Efficient Nanofibrous Membranes for Antibacterial Wound Dressing and UV Protection

Materials with a hierarchical structure often demonstrate superior properties with combined and even synergistic effects of multiple functions. Herein, we report the design of a new class of material with a multicompartment nanofibrous structure as a promising candidate for antibacterial wound dressing and functional textile applications. The design consists in first synthesizing nanocapsules loaded with functional payloads and subsequently embedding the nanocapsules into polymer nanofibers by using the colloid-electrospinning technique. The nanocontainer-in-nanofiber structure allows for a selective and separate loading of different functional agents with different polarities, and it offers a flexible combination of the properties of nanocontainers and nanofibers. An example of the potential for these multicompartment materials is demonstrated here, in which the synergistic antibacterial effect against E. coli K-12 and B. Subtilis combined with anti-UV property is shown.

Promethazine-montmorillonite inclusion complex to enhance drug photostability

The capability of montmorillonite as a matrix (MONT) to improve the photostability of photolabile drugs has been recently reported. Herein promethazine (PRO), which was chosen as a model drug because of its photodegradation mechanism, was intercalated into this inorganic matrix, and the effects on drug photoprotection were evaluated as well. The hybrid material (MONT-PRO) was successfully prepared with high drug loading and then was characterized by X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and FTIR spectroscopy. The spectrophotometric measurements as a function of light exposure time showed that PRO intercalation into montmorillonite markedly improved the drug photostability because a 5-fold-slower degradation rate was determined compared to that measured for PRO in homogeneous solutions; nanosecond transient absorption measurements highlighted that the interaction with the inorganic matrix made negligible the photoionization process of the drug, and its efficiency in producing singlet oxygen was strongly reduced. The MONT-PRO intercalation compound could be easily formulated in gel or ointment media without losing its photostability.