Numerical analysis of electromagnetic hyperthermia of the human thorax

Numerical evaluation of heating of the human head due to magnetic resonance imaging

In this paper, we present a numerical model for evaluating tissue heating during magnetic resonance imaging (MRI). Our method, which included a detailed anatomical model of a human head, calculated both the electromagnetic power deposition and the associated temperature elevations during an MRI head examination. Numerical studies were conducted using a realistic birdcage coil excited at frequencies ranging from 63 to 500 MHz. The model was validated both experimentally and analytically. The experimental validation was performed at the MR test facility located at the Food and Drug Administration's Center for Devices and Radiological Health.

A new applicator utilizing distributed electrodes for hyperthermia: a theoretical approach

We propose a new type of applicator for hyperthermia namely a Distributed Electrodes Applicator. Many electrodes are fixed on boli below which the patient is placed. A set of RF with optimized amplitudes and phases is supplied to the electrodes so as to minimize the ratio of SAR (specific absorption rate) in the fat layers to that in the central region of the patient. SAR patterns in a heated material were calculated using two-dimensional finite element method, and the results showed that the proposed applicator can heat the deep portions of the patient without excessive heating of the fat layers.

Present and future status of noninvasive selective deep heating using RF in hyperthermia

To achieve hyperthermia using electromagnetic energy, RF of under 100 MHz is basically suitable for the external heating of the deep portions of the body. For applicators using such RF, the following types are considered: capacitive, inductive, radiative and hybrid. With radiative applicators, the intensity of the EM waves radiated from the applicator decreases with propagation into the material to be heated, but the phased annular array of radiative applicators potentially increases the intensity of the EM energy in the deep portion owing to the interference of the waves. Using this method, the focusing of EM energy depends on the dielectric properties of the material to be heated. With respect to RF heating at a lower frequency than the RF used for the annular phased array, some devices have been said to concentrate EM energy in the deep portions, where the characteristics of 'wave' are not utilised. To this end, some methods using capacitive electrodes, an inductive coil, or a combination of both, are being designed. The results of using such methods have shown that it is possible to supply sufficient EM energy to the muscle layers deep in the material to be heated, without heating the fat layers excessively.

Whole body heat balance during the human thoracic hyperthermia

A whole-body heat balance model during hyperthermia is developed. In the model, local temperature is calculated using a finite-element model. The perfusion blood, along with its energy, is circulated to the rest of the body, where the heat dissipation is calculated using lumped segments. With this model the effects of the electromagnetic power dosage on the body core temperature and the responses of other body elements are analysed for the human thoracic hyperthermia.