Skin absorption of the industrial catalyst dimethylethylamine in vitro in guinea pig and human skin, and of gaseous dimethylethylamine in human volunteers

Skin Notations for Low-Molecular-Weight Amines: Development of a Testing Protocol with Isopropylamine as an Example

Owing to their volatility, the most important occupational exposure route for low-molecular-weight amines is considered to be inhalation. However, dermal exposure is also possible in many workplace situations. There are limited data available on the dermal uptake of these amines through human skin, and existing exposure standard skin notations are typically based on acute toxicity animal studies or by chemical analogy. This gap in knowledge is in part due to a lack of standardized approach for assessing dermal uptake. We describe a relatively simple protocol for the determination of permeation of low-molecular-weight amines through human skin in vitro. Using isopropylamine as a test amine, it was found that isopropylamine vapour has limited capacity to absorb into, or penetrate through, the epidermal layer of human skin, even at lethal atmospheric concentrations. This protocol can be adapted for a range of exposure scenarios, including clothing effects, and may be used to determine whether skin notations are warranted.

Synthesis of novel methacrylate based adsorbents and their sorptive properties towards p-nitrophenol from aqueous solutions

The polymeric adsorbents were synthesized from 2-dimethylaminoethyl methacrylate (DMA) and [2-(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide (DMAC(16)) monomers in the presence of ethylene glycol dimethacrylate (EDMA) cross-linking monomer using suspension polymerization technique and their adsorption efficiencies in the removal of p-nitrophenol from aqueous solutions were investigated. DMAC(16) monomer was prepared by means of modification of DMA monomer with 1-bromohexadecane. Adsorption experiments were carried out in a batch system and the experimental parameters were evaluated with respect to pH, agitation time, temperature and initial p-nitrophenol concentration. It was observed that the adsorbent poly[2-(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide (p-DMAC(16)) prepared from DMAC(16) monomer was more effective in the removal of p-nitrophenol than the adsorbent poly(2-dimethylaminoethyl methacrylate) (p-DMA) prepared from DMA monomer. The effective pH ranges for the adsorption of p-nitrophenol onto p-DMAC(16) and p-DMA were 2-12 and 3-9, respectively. Langmuir and Freundlich adsorption models were used to describe the isotherms and find isotherm constants. The Langmuir model was well agreed with experimental data for both adsorbents. The pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetic models were used to understand the mechanism of the adsorption process and it fitted very well the pseudo-second-order kinetic model for each adsorbent. Thermodynamic parameters such as activation energy and changes of free energy, enthalpy, and entropy were also evaluated for the adsorption of p-nitrophenol onto each adsorbent. Additionally, reusability of the adsorbents was investigated and the results showed that both adsorbents can be employed many times without a significant loss in their adsorption capacities for the removal of p-nitrophenol from water.

Is the permeability coefficient Kp a reliable tool in percutaneous absorption studies?

In percutaneous absorption studies the potency of penetration of chemical substances is often described by the permeability coefficient Kp. The experimentally determined Kp is characterized according to Fick's first law of diffusion by the ratio of flux and the concentration of the test compound (Kp=Flux/C). This equation implies that in percutaneous absorption studies Kp is theoretically a more reliable parameter than flux taking the concentration into consideration, and should remain constant for each compound independent from the grade of dilution. In our study we evaluated the course of the percutaneous absorption parameters flux and Kp of neat and of 50% aqueous solution of 2-butoxyethanol (BE). An infinite dose of neat and 50% aqueous solution of non-radiolabeled BE were applied on excised human skin from two donors in static diffusion cells in parallel (for each test setting n=21). The flux of 50% aqueous BE (0.704+/-0.152 mg/cm2/h) was about 15-fold higher than that of neat BE (0.045+/-0.014 mg/cm2/h). The comparison of the Kp values of both test settings showed with a factor of about 31 (Kp=1.563 x 10(-3) cm/h) much higher values for 50% aqueous BE and Kp=0.050 x 10(-3) cm/h for neat BE. Although the flux does not consider the chemical concentration, it showed a smaller difference in both test settings as Kp; however, the flux remains a non-specific parameter for the description of percutaneous absorption. The results of our experiments showed that the permeability coefficient Kp was not able to adjust the flux of BE to the concentration. This is in agreement with the evaluation of Kp from BE data described in the literature.