Microfibrillated cellulose films containing chitosan and tannic acid for wound healing applications

Micro- and nano-hybrid cellulose fibers prepared by straightforward and high-efficiency hot water soaking-assisted colloid grinding for high-performance cellulose paper

Micro- and nano-hybrid cellulose fiber (MNCF) stands out as a versatile cellulosic nanomaterial with promising applications in various fields owing to its excellent intrinsic nature and outstanding characteristics. However, the inefficiency in preparing MNCF, attributed to a complex multi-step processing, hinders its widespread adoption. In this study, a straightforward and highly efficient method for MNCF preparation was developed via a hot water soaking-assisted colloid grinding strategy. Active water molecules in hot water facilitating stronger transverse shrinkage and longitudinal expansion in fiber crystallized region, and thus improving the fibrillation degree of cellulose fibers. As a result, MNCFs with a mean diameter of 37.5 ± 22.2 nm and high concentration (2 wt%) were successfully achieved though pure mechanical method. The micro and nano-hybrid structure leads to the corresponding resulting cellulose paper with micro- and nano-hybrid structure possesses a compact stacking and fewer defects, leading to extraordinary mechanical properties including tensile strength of 204.5 MPa, Young's modulus of 6.3 GPa and elongation of 10.1 %. This work achieves significant progress towards straightforward and highly efficient production of MNCFs, offering an appreciable prospect for the development of multifunctional MNCF-based materials.

pH stimulus-responsive hybrid nanoparticles: A system designed for follicular delivery of brazilian plant-derived 5-alpha-reductase enzyme inhibitors

The 5-alpha-reductase enzyme, present in pilosebaceous units, plays a crucial role in the appearance of cutaneous hyperandrogenism manifestations (hirsutism, acne, and androgenetic alopecia). Its inhibition is an excellent strategy to reverse these conditions. Given the limitations of existing treatments, with transient effects and delayed therapeutic response, as well as the possibility of causing undesirable side effects, this study sought to develop new drug delivery systems to overcome these limitations. In other words, innovative stimuli-responsive hybrid nanoparticles were synthesized using silica/natural polysaccharides, encapsulating 5-alpha-reductase enzyme inhibitors derived from the plant Stryphnodendron adstringens (Mart.) Coville (commonly known as 'Barbatimão'). Silica core was synthesized by the modified Stöber method. The pH responsive polysaccharides used to coat the porous silica cores were chitosan, and sodium alginate, this coating was carried out using the Layer-by-Layer technique. The hybrid nanoparticles were characterized at molecular and physical-chemical levels. Furthermore, encapsulation efficiency, pH-dependent release behavior, and cytotoxicity were evaluated. Amorphous mesoporous structure with adequate size for follicular delivery (between 300 and 600 nm) in addition to effective phytocompound loading capacity, above 80 % was obtained. Based on the release studies, it was possible to observe pH responsiveness. The ethyl acetate fraction (EAF) obtained from "Barbatimão" bark extract was released in a controlled and more efficient manner by the alginate-coated nanoparticle (SNP_EAF_SA) at pH 7.4, which corresponds to the pH at the deepest area of hair follicles. Furthermore, SNP_EAF_SA proved to be less cytotoxic compared to EAF and chitosan-coated hybrid nanoparticles (SNP_EAF_CH). Characterization, release, and cytotoxicity results indicate that SNP_EAF_SA is a promising system for on-demand follicular delivery of antiandrogenic actives contained in EAF.

Nanofibrillated cellulose originated from Rhododendron ponticum to produce scaffolds using 3D printing for biomedical applications

Rhododendron ponticum is an invasive species that spreads rapidly and is described as one of the biggest threats to peatlands in Ireland. This study offers an innovative approach to utilizing Rhododendron waste. Initially, sawdust was submitted to a bleaching treatment and the nanofibrillated cellulose (NFC) was obtained using two different methods: ultra-fine friction grinding and twin-screw extrusion with the assistance of TEMPO (2,2,6,6-tetramethyl-1-piperidinyloxy) pre-treatment. The samples processed through twin-screw extrusion exhibited the presence of NFC at five intervals, as confirmed by TEM analysis. However, these samples displayed a higher diameter deviation compared to those processed through grinding alone. Notably, after 20 extrusion steps, the NFC diameter became more uniform, reaching approximately 35 nm. Sedimentation tests showed that extrusion produced more homogeneous cellulose size than the grinder method. However, FTIR characterization for the samples showed a unique band related to C-O-C glycosidic linkage. The results showed that grinding breaks these groups resulting in crystallinity values lower than extrusion, 50 % compared 60 %. Therefore, NFC with 20 steps by grinding was blended with polycaprolactone to produce a 3D scaffold using a 3D printer at different ratios of 1-5 % addition. The effect of 1 % of NFC was unique showing significant enhanced mechanical properties compared to pure polycaprolactone (PCL), additionally, the NFC does not exhibit toxicity so these materials show promise for biomedical applications.

Coffee Silverskin Cellulose-Based Composite Film with Natural Pigments for Food Packaging: Physicochemical and Sensory Abilities

To promote a circular economy, the use of agricultural by-products as food packaging material has steadily increased. However, designing food packaging films that meet consumers' preferences and requirements is still a challenge. In this work, cellulose extracted from coffee silverskin (a by-product of coffee roasting) and chitosan were combined with different natural pigments (curcumin, phycocyanin, and lycopene) to generate a variety of composite films with different colors for food packaging. The physicochemical and sensory properties of the films were evaluated. The cellulose/chitosan film showed favorable mechanical properties and water sensitivity. Addition of natural pigments resulted in different film colors, and significantly affected the optical properties and improved the UV-barrier, swelling degree, and water vapor permeability (WVP), but there were also slight decreases in the mechanical properties. The various colored films can influence the perceived features and evoke different emotions from consumers, resulting in films receiving different attraction and liking scores. This work provides a comprehensive evaluation strategy for coffee silverskin cellulose-based composite films with incorporated pigments, and a new perspective on the consideration of the hedonic ratings of consumers regarding bio-based films when designing food packaging.

High-loading Cu single-atom nanozymes supported by carbon nitride with peroxidase-like activity for the colorimetric detection of tannic acid

The design of nanozymes with high metal atom loading is of great significance to improve enzyme activity and is also the key to furthering the construction of highly sensitive colorimetric sensors. In this work, a colorimetric sensor for the quantitative analysis of tannic acid (TA) was developed based on two-dimensional carbon nanosheet carbon nitride (CN)-supported Cu single-atom nanozymes (Cu/CN). Cu/CN was synthesized by supramolecular preorganization and calcination, with an ultrathin nanosheet structure and a high density of Cu active sites, with a Cu loading of up to 14.3 wt%. Benefiting from the above characteristics, Cu/CN exhibits peroxidase-mimicking activity and excellent catalytic performance. Therefore, a colorimetric sensor was constructed for the fast and sensitive quantitative analysis of TA with good linearity in the range of 0.09-3.2 μM and a low detection limit of 30 nM. Furthermore, the sensor was successfully applied to the analysis of TA in tea samples of different varieties. This work sheds new light on the design of nanozymes with a high density of active sites and the analysis of TA in real environments.

Biosorption of bioactive compounds in bacterial nanocellulose: Mechanisms and physical-chemical properties

Bacterial cellulose (BC) is a biomaterial produced by Gluconacetobacter xylinus, with wide applicability in different areas, such as biomedical, pharmaceutical, and food. BC production is usually carried out in a medium containing phenolic compounds (PC), such as teas, however, the purification process leads to the loss of such bioactive. Thus, the innovation of this research consists of the reincorporation of PC after the purification of the BC matrices through the biosorption process. In this context, the effects of the biosorption process in BC were evaluated to maximize the incorporation of phenolic compounds from a ternary mixture of hibiscus (Hibiscus sabdariffa), white tea (Camellia sinensis), and grape pomace (Vitis labrusca). The biosorbed membrane (BC-Bio) showed a great concentration of total phenolic compounds (TPC = 64.89 mg L^-1) and high antioxidant capacity through different assays (FRAP: 130.7 mg L^-1, DPPH: 83.4 mg L^-1, ABTS: 158.6 mg L^-1, TBARS: 234.2 mg L^-1). The physical tests also indicated that the biosorbed membrane presented high water absorption capacity, thermal stability, low permeability to water vapor and improved mechanical properties compared to BC-control. These results index that the biosorption of phenolic compounds in BC efficiently increases bioactive content and improves physical membrane characteristics. Also, PC release in a buffered solution suggests that BC-Bio can be used as a polyphenol delivery system. Therefore, BC-Bio is a polymer with wide application in different industrial segments.

An agar-polyvinyl alcohol hydrogel loaded with tannic acid with efficient hemostatic and antibacterial capacity for wound dressing

Rapid hemostasis, antibacterial effect and promotion of wound healing are the most important functions that wound dressings need to have. In this work, we designed and prepared a hydrogel with antibacterial effect, hemostatic ability and wound healing promotion using agar, polyvinyl alcohol (PVA) and tannic acid (TA). We performed a series of tests to characterize the structure and properties of AGAR@PVA-TA hydrogels. The results showed that the AGAR@PVA-TA hydrogels had good mechanical properties and excellent antibacterial ability as well as good hemocompatibility. The cytotoxicity results showed that the AGAR@PVA-TA hydrogels had good cytocompatibility. And the TA loaded hydrogels also presented some good performances in animal studies. In the liver hemostasis model, the AGAR@PVA-TA hydrogel showed good hemostatic ability. Also, the AGAR@PVA-TA hydrogel was able to promote wound healing in an S. aureus-infected rat wound model. More importantly, our research results demonstrated that compared to other polyphenols (such as proanthocyanidins), TA could better improve the mechanical properties, antibacterial ability and rapid hemostasis of hydrogels, which illustrated the uniqueness of TA. Therefore, the TA loaded hydrogel (AGAR@PVA-TA hydrogel) has the potential to be applied as a wound dressing.

Characterization of Gels and Films Produced from Pinhão Seed Coat Nanocellulose as a Potential Use for Wound Healing Dressings and Screening of Its Compounds towards Antitumour Effects

The reuse of agro-industrial waste assumes great importance today. Pinhão is the seed of Araucaria angustifolia, which is native to the mountains of southern Brazil, Paraguay, and Argentina. The coat is a by-product of this seed and is rich in phenolic compounds. The present study aimed to use the residue as a precursor material for the production of nanocellulose through the mechanical defibrillation process and perform the characterization of the films and the gel to investigate the effect on the physical and regenerative properties when incorporated with polyvinyl alcohol (PVA). The modulus of elasticity was higher when the MFC of pinhão was added to the PVA. Film and gel had their cytotoxicity tested by MTT assay using 3T3 fibroblast and Schwann cancer cells, and a migration assay was also performed using the scratch test on HaCat keratinocyte cells. For the scratch test, film and gel samples with low concentration presented a complete scratch closure in 72 h. Molecular docking was performed and quercetin had the ideal interaction score values, so it was used with the PACAP protein which presented a slightly moderate interaction with the protein synthesis of Schwann cells, presenting compactness of the compound after 14 ns.

Fabrication of chitosan nanofibrous scaffolds based on tannic acid and metal-organic frameworks for hemostatic wound dressing applications

Here, we developed chitosan (CS)-based nanofibrous scaffold consisting of tannic acid (TA) and zinc-based metal-organic framework (MOF) as a novel antibacterial and hemostatic wound dressing. The effect of MOF content and its incorporation within and onto CS/PVA-TA nanofibrous scaffolds were studied. The morphological characterization of fabricated nanofibrous scaffolds revealed the formation of uniform and bead-free nanofibers with an average diameter between 120 and 150 nm. The uniform and continuous decoration of MOF crystals on nanofibrous scaffold surfaces were confirmed by FESEM. The developed nanofibrous scaffolds exhibit appropriate physicochemical characteristics such as chemical and crystalline structure, surface wettability and swelling, and mechanical properties. It is shown that the incorporation of TA and MOFs greatly enhanced the hemostatic performance of the CS/PVA nanofibrous scaffold by providing rapid liquid absorbability and accelerating the aggregation of coagulation factors and platelets. Furthermore, the results of the MTT assay suggested the good biocompatibility of nanofibrous scaffolds containing MOF nanoparticles. The nanofibrous scaffolds exhibited excellent antibacterial activity against Escherichia coli and Staphylococcus aureus. The disk diffusion antibacterial assay showed that the nanofibrous scaffolds containing TA and MOF could protect wound from bacterial infection. The findings provide new insights to develop a MOF-modified nanofibrous structure with great potential for hemostatic wound dressing application.