Toward a novel membrane process for organic carbon removal-fate of slowly biodegradable substrate in super fast membrane bioreactor

Up-concentration processes of organics for municipal wastewater treatment: New trends in separation

Carbon neutrality is a pressing goal for the whole society. Over 20% of municipality electrical energy on public utilities was consumed by the operation of wastewater treatment plants (WWTPs). Up-concentration of organic matters and maximum energy recovery is essential for a more sophisticated municipal wastewater management. Chemical coagulation and biological adsorption have been used to achieve efficient carbon capture, while separation is an overlooked step. It may lead to poor effluent quality, as well as consume most of the time and volume. The introduction of new driving forces, such as pressure and magnetism, significantly improved the retention rate and speed, respectively. In this paper, recent works were comprehensively reviewed and a horizontal comparison was conducted from aspects of separation speed, retention rate, concentrate characteristics and economic costs. This review also discussed the selection of technologies under different conditions. Finally, the practical application, fouling mitigation with considering the value of the concentrate, identification of unique concentrate characteristics, and the establishment of an evaluation system was suggested as core issues for future researches. This review will promote the development of an energy-efficient wastewater treatment system with up-concentration processes.

High temperature pyrolysis of sewage sludge as a sustainable process for energy recovery

This study explored the potential of high temperature pyrolysis for energy recovery from domestic sewage. It mainly defines optimum operating conditions to maximize syngas generation. A pyrolysis unit was operated in batch mode, at temperatures of 450, 600 and 850 °C, rotation speeds of 10, 40 and 60 Hz. The sludge had 6% moisture content; it contained 65% organic matter and involved a low calorific value of 13.535 kJ/kg dry matter. Pyrolysis at 850 °C and high rotation speed of 60 Hz yielded the highest conversion of sludge to syngas, with an average of 59% of the organic matter as syngas, 29% as tar and 12% as biochar. Pyrolysis enabled 74% of the energy recovery as syngas and tar. Continuous full-scale pyrolysis systems would further increase the syngas by recovering condensable gaseous products and/or recycling tar back into the pyrolysis unit. A unified approach for energy recovery management should equally consider what fraction of the energy contained in the wastewater was consumed and wasted before generating the sludge. Therefore, the adopted management scheme should also cover all design and operation parameters of the treatment plant, because this is how the energy is best conserved even before the sludge is generated.