Treating MTBE-contaminated water using sewage sludge-derived activated carbon

Optimization for the conditions to prepare sewage sludge derived adsorbent and ciprofloxacin adsorption

In the present study, sewage sludge (SS) was used to synthesize activated carbon (AC) which was further utilized as adsorbent for the removal of ciprofloxacin (CPX) from synthetic wastewater. The adsorbent was prepared by chemical activation method using ZnCl₂ as activating agent. Design of experiments (DOE) approach was explored to determine the optimum operating conditions for the synthesis of AC and CPX removal from the wastewater. The optimum conditions for AC synthesis (i.e., carbonization temperature = ~500°C, activation time = 30 min, and impregnation ratio = 2.26) were decided based on results for three response parameters, that is, adsorbent yield, methylene blue removal, and iodine number. The synthesized adsorbent showed ~93% CPX removal (initial CPX concentration = 100 mg/L) at the following optimum conditions: adsorbent dose = 1.31 g/L, pH = 7 and reaction time = 12 h. Langmuir isotherm model was best fit to the equilibrium adsorption data (maximum adsorption capacity of SS derived AC = 102 mg/g) whereas pseudo-second order model showed the best fit to adsorption kinetic data (adsorption capacity = 77.5 mg/g). An effort was also made to reduce fresh water requirement for adsorbent synthesis by recycling the wastewater produced during chemical activation of SS. PRACTITIONER POINTS: Experiment design approach was used for optimization of adsorbent preparation conditions and CPX removal conditions by waste derived adsorbent. Sewage sludge derived adsorbent had BET surface area of 564 m² /g which is comparable to commercial activated carbon. 93% CPX adsorption with the sewage sludge derived adsorbent at optimum conditions. Langmuir model better suited the CPX adsorption data. Wastewater recycling and ZnO recovery from wastewater produced during adsorbent synthesis were performed.

Performance and mechanism of hydrogen sulfide removal by sludge-based activated carbons prepared by recommended modification methods

The sludge-based activated carbons (SACs) were prepared by sewage sludge and corn straw and modified by ferric nitrate. The H₂S removal performance and the desulfurization mechanism of the modified SAC were studied. Results showed that breakthrough sulfur capacity and saturation sulfur capacity of the SAC prepared by recommended modification were 27.209 mg/g and 48.098 mg/g, which were as 4.68 times and 7.02 times larger as those before modification, respectively. Additionally, results showed that the desulfurization products of unmodified SAC were mainly sulfur, while that of modified SAC were mainly sulfate. These results indicated that ferric nitrate modification changed the way of hydrogen sulfide removal by SAC: the desulfurization process of unmodified SAC can be expressed as S^2- → S⁰ → S⁴⁺ → S⁶⁺, and the oxidative active component was dominated by O*, while that of modified SAC can be expressed as S^2- → S⁰ → S⁶⁺, and the oxidative active components are both Fe³⁺ and O*.

Biosolids and sludge management

The advancements in the field of sludge and biosolids have been made over the past year. This review outlines the major contributions of researchers that have been published in peer-reviewed journals and conference proceedings throughout 2018. The review is organized in sections including regulatory developments and market analysis; analysis and quantification of characteristics including microconstituents and metals; treatment advances for the conversion of sludge to biosolids including pretreatment and sludge minimization, conditioning and dewatering, digestion, composting, and innovative technologies; product development and reuse including adsorbents and thermal products, agricultural and other uses, and innovative uses; odor and air emissions; and energy factors. PRACTITIONER POINTS: Summary of advances in the field of residuals and biosolids research in 2018. This review outlines the major contributions of researchers that have been published in peer-reviewed journals and conference proceedings. Topics covered range from regulation to innovation.