Potential of Nb2O5 nanofibers in photocatalytic degradation of organic pollutants

Striking the balance: unveiling the interplay between photocatalytic efficiency and toxicity of La-incorporated Ag3PO4

Persistent molecules, such as pesticides, herbicides, and pharmaceuticals, pose significant threats to both the environment and human health. Advancements in developing efficient photocatalysts for degrading these substances can play a fundamental role in remediating contaminated environments, thereby enhancing safety for all forms of life. This study investigates the enhancement of photocatalytic efficiency achieved by incorporating La3+ into Ag3PO4, using the co-precipitation method in an aqueous medium. These materials were utilized in the photocatalytic degradation of Rhodamine B (RhB) and Ciprofloxacin (CIP) under visible light irradiation, with monitoring conducted through high-performance liquid chromatography (HPLC). The synthesized materials exhibited improved stability and photodegradation levels for RhB. Particularly noteworthy was the 2% La3+-incorporated sample (APL2), which achieved a 32.6% mineralization of CIP, nearly three times higher than pure Ag3PO4. Toxicological analysis of the residue from CIP photodegradation using the microalga Raphidocelis subcapitata revealed high toxicity due to the leaching of Ag+ ions from the catalyst. This underscores the necessity for cautious wastewater disposal after using the photocatalyst. The toxicity of the APL2 photocatalysts was thoroughly assessed through comprehensive toxicological tests involving embryo development in Danio rerio, revealing its potential to induce death and malformations in zebrafish embryos, even at low concentrations. This emphasizes the importance of meticulous management. Essentially, this study adeptly delineated a thorough toxicological profile intricately intertwined with the photocatalytic efficacy of newly developed catalysts and the resultant waste produced, prompting deliberations on the disposal of degraded materials post-exposure to photocatalysts.

Green synthesis of CuO/Fe2O3/ZnO ternary composite photocatalyst using grape extract for enhanced photodegradation of environmental organic pollutant

This research delves into fabricating a CuO/Fe2O3/ZnO (CFZ) ternary composite photocatalyst, employing grape extract for its eco-conscious synthesis. The method intricately integrates copper acetate, ferric nitrate, and zinc acetate as precursor compounds, harmonizing them with grape extract serving as a green reducing agent. Meticulous microwave treatment and controlled calcination orchestrate the nuanced formation of the desired composite material. The extensive characterization, involving X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDXS), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), and photoluminescence (PL) spectroscopy, unveils an array of favorable physical, chemical, and optical attributes conducive to proficient photocatalysis. Notably, CFZ-10mc showcases a narrower bandgap of 1.91 eV, which is pivotal for bolstering electron-hole separation, thereby enhancing its photocatalytic efficacy. Assessment of CFZ's performance in degrading Rhodamine B (RhB) under UV irradiation highlights an impressive 88.8% degradation efficiency within 120 min, accompanied by a kinetic rate constant of 1.81 × 10-2 min-1. Deliberation upon crucial parameters, including photocatalyst dosage, initial RhB pH, and reactor energy consumption, introduces the electrical energy per order (EEO) as a notable efficiency metric. CFZ manifests a substantial reduction in operational costs, estimated to be 18.10 times lower than conventional photolysis, signifying an EEO value of 509.17 kWh m-3 order-1. Optimal operational conditions propose a photocatalyst content of 1.5 g L-1 and an initial RhB pH of 7, fostering the prevalence of the primary active species, •OH. These findings illuminate CFZ's potential in mitigating organic pollutants, underlining its pivotal role in sustainable water remediation. Additionally, practical implementation guidelines for leveraging CFZ's capabilities in real-world applications are presented with care and consideration.

A systematic review on Nb2O5-based photocatalysts: Crystallography, synthetic methods, design strategies, and photocatalytic mechanisms

With the increasing popularity of photocatalytic technology and the highly growing issues of energy scarcity and environmental pollution, there is an increasing interest in extremely efficient photocatalytic systems. The widespread immense attention and applicability of Nb2O5 photocatalysts can be attributed to their multiple benefits, including strong redox potentials, non-toxicity, earth abundance, corrosion resistance, and efficient thermal and chemical stability. However, the large-scale application of Nb2O5 is currently impeded by the barriers of rapid recombination loss of photo-activated electron/hole pairs and the inadequacy of visible light absorption. To overcome these constraints, plentiful design strategies have been directed at modulating the morphology, electronic band structure, and optical properties of Nb2O5. The current review offers an extensive analysis of Nb2O5-based photocatalysts, with a particular emphasis on crystallography, synthetic methods, design strategies, and photocatalytic mechanisms. Finally, an outline of future research directions and challenges in developing Nb2O5-based materials with excellent photocatalytic performance is presented.

Improved performance of Zn-doped SnO2 modified g-C3N4 for visible light-driven photocatalysis

The low-cost composite of g-C₃N₄ modified by Zn-doped SnO₂ nanoparticles was prepared for the first time in this work. The characterization results of XRD and SEM demonstrated that Zn was successfully doped into SnO₂. The formed Sn-O-Zn bonds and interaction between the Zn-doped SnO₂ sample and g-C₃N₄ in the composite were explored by FT-IR and XPS technologies. Photocatalytic degradation experiments showed that the as-prepared optimal composite photocatalyst displayed enhanced photocatalytic reactivity towards both dyes and antibiotics, which could degrade 85.6% of RhB and 86.8% of tetracycline within 30 and 90 min, respectively. The oxygen vacancies formed in SnO₂ after Zn doping could capture the photogenerated electrons of g-C₃N₄, thereby promoting the separation of photogenerated electron-hole pairs, then more ·O₂^- and holes can be generated during the visible light-driven photocatalytic reaction, so that the composite of Zn-doped SnO₂/g-C₃N₄ acquired higher photocatalytic activity and accelerated the degradation of target organics. Active species capturing experiments and ESR detection results also confirmed that ·O₂^- and holes were the main active species in the reaction process. This work developed a novel g-C₃N₄-based photocatalyst with no noble metal, low price, and high photocatalytic activity, which could provide a cost-effective and high-efficiency strategy for wastewater treatment.

Preparation and Application of Nb2O5 Nanofibers in CO2 Photoconversion

Increasing global warming due to NOx, CO2, and CH4, is significantly harming ecosystems and life worldwide. One promising methodology is converting pollutants into valuable chemicals via photocatalytic processes (by reusable photocatalysts). In this context, the present work aimed to produce a Nb2O5 photocatalyst nanofiber system by electrospinning to convert CO2. Based on the collected data, the calcination at 600 ∘C for 2 h resulted in the best condition to obtain nanofibers with homogeneous surfaces and an average diameter of 84 nm. As a result, the Nb2O5 nanofibers converted CO2 mostly into CO and CH4, reaching values around 8.5 μmol g−1 and 0.55 μmol g−1, respectively.