Construction of Esophagogastric Anastomosis in Rabbits with Magnetic Compression Technique

Feasibility experiment of a novel deformable self-assembled magnetic anastomosis ring (DSAMAR) for gastrointestinal anastomosis through a natural orifice

Although the application of magnetic compression anastomosis is becoming increasingly widespread, the magnets used in earlier studies were mostly in the shape of a whole ring. Hence, a deformable self-assembled magnetic anastomosis ring (DSAMAR) was designed in this study for gastrointestinal anastomosis. Furthermore, its feasibility was studied using a beagle model. The designed DSAMAR comprised 10 trapezoidal magnetic units. Twelve beagles were used as animal models, and DSAMARs were inserted into the stomach and colon through the mouth and anus, respectively, via endoscopy to achieve gastrocolic magnamosis. Surgical time, number of failed deformations, survival rate of the animals, and the time of magnet discharge were documented. A month later, specimens of the anastomosis were obtained and observed with the naked eye as well as microscopically. In the gastrocolic anastomosis of the 12 beagles, the procedure took 65-120 min. Although a deformation failure occurred during the operation in one of the beagles, it was successful after repositioning. The anastomosis was formed after the magnet fell off 12-18 days after the operation. Naked eye and microscopic observations revealed that the anastomotic specimens obtained 1 month later were well-formed, smooth, and flat. DSAMAR is thus feasible for gastrointestinal anastomosis under full endoscopy via the natural orifice.

Application of Y-Z deformable magnetic ring for recanalization of transanal single-access rectal stricture

Magnetic compression anastomosis has been reported to have remarkable clinical outcomes. Here, we tested the applicability of a Y-Z deformable magnetic ring (DMR) for non-surgical manipulation of rectal stenosis (RS) in a beagle dog model under a transanal single-access condition. RS was modeled in 8 beagle dogs using partial ligation with silk thread. Under X-ray guidance, the Y-Z DMR was positioned at the proximal and distal ends of the RS, and the magnetic ring was bent into an "O" shape, such that the two rings were magnetically attracted. Operation time, complications during or after operation, and discharge time of the magnetic rings were recorded. The anastomosis bursting pressure was measured two weeks after removing the rings, and its formation was assessed through gross and histological examination. Partial ligation with a silk thread successfully established the canine RS model. After Y-Z DMR installation, the magnetic ring was successfully reconfigured from an "S" to an "O" shape. Strong attraction existed between the rings. The operation time was 9-15 min (average: 11.75 ± 1.98 min). No rectal bleeding or perforation occurred during or after operation. The ring was naturally expelled 7-10 days after surgery. A pressure of > 300 mmHg was recorded at the point of anastomosis rupture. The rectal anastomosis appeared to have healed properly on the surface, which was confirmed histologically, signifying the success of this procedure. A Y-Z DMR facilitated the successful recanalization of transanal single-channel RS without needing surgery in an animal model.

A Novel Deformable Self-Assembled Magnetic Anastomosis Ring (DSAMAR) for Esophageal Stenosis Recanalization without Temporary Gastrostomy in Beagle Dogs

BACKGROUND

To assess the feasibility of a deformable self-assembled magnetic anastomosis ring (DSAMAR) in the treatment of esophageal stenosis in beagle dogs via transoral access without temporary gastrostomy.

METHODS

Experimental esophageal stenosis was created in 10 beagle dogs by partial cervical esophageal ligation. The DSAMAR was inserted into the distal esophagus via the narrow section of the esophagus using a gastroscope. A circular DSAMAR was placed in the proximal esophagus. The magnetic rings on both sides of the experimental stenosis automatically attracted each other. We then recorded the operation time, postoperative complications, anastomotic formation time, and magnetic ring discharge time. The dogs were euthanized 4 weeks postoperatively; subsequently, we obtained the esophageal anastomotic specimens and observed the anastomotic formation via the naked eye and by light microscopy.

RESULTS

Our esophageal stenosis model produced reproducible stenoses in all dogs, which was confirmed via endoscopy and esophagography. DSAMAR was successfully implanted in all experimental animals under endoscopic and X-ray monitoring, and all linear DSAMARs were successfully transformed into rings. The magnets at both ends of the esophageal stenosis were automatically attracted. All animals survived until euthanasia. No complications, including esophageal perforation, bleeding, and gastrointestinal obstruction, were noted during the perioperative period. The mean operation time of endoscopic magnetic anastomosis was 15.6 ± 2.41 (range, 12-19) min. The mean esophageal anastomotic formation time was 8.8 ± 1.03 (range, 7-10) days, and the mean expulsion time of DSAMAR was 13.94 ± 2.88 (range, 10-19) days. Gastroscopy and esophagography were performed at 4 weeks postoperatively; the esophageal patency was good. Macroscopic observation of the esophageal anastomotic specimens revealed that the esophageal mucosal layer of the anastomosis had good continuity and the anastomosis was smooth.

CONCLUSION

DSAMAR is a feasible option for magnetic recanalization of esophageal stricture via transoral access without temporary gastrostomy.

Value of a novel Y-Z magnetic totally implantable venous access port in improving the success rate of one-time needle insertion

Background and objectives

A totally implantable venous access port (TIVAP) is a commonly used intravenous infusion device for patients receiving chemotherapy or long-term infusion therapy. To improve the success rate of one-time insertion of the Huber needle, we developed a novel Y-Z magnetic TIVAP (Y-Z MTIVAP), which we produced using three-dimensional printing technology.

Materials and methods

The Y-Z MTIVAP includes a magnetic port body and a magnetic positioning device. For testing, we established four venous port implantation models using the two types of TIVAPs and two implantation depth ranges (≤5 mm and >5 mm). Twenty nurses performed Huber needle puncture with the four models, and we recorded the number of attempts required for successful needle insertion, the operation time, and the operator's satisfaction.

Results

The success rate for one-time needle insertion with the Y-Z MTIVAP was significantly higher than that with the traditional TIVAP at either depth range (100% vs. 75% at ≤5 mm, p = 0.047; 95% vs. 35% at >5 mm, p < 0.001). With increasing implantation depth, the success rate for one-time insertion was significantly reduced with the traditional TIVAP (75% at ≤5 mm vs. 35% vs. >5 mm, p = 0.025), but the success rate with the Y-Z MTIVAP was not significantly affected (100% vs. 95%, p = 1.000). The operation time with the Y-Z MTIVAP was significantly shorter than that with the traditional TIVAP at either depth range (both p < 0.001), and 90% of operators reported that the Y-Z MTIVAP was superior to the traditional TIVAP.

Conclusions

The theoretical design of Y-Z MTIVAP is feasible, and the preliminary in vitro simulation experiment shows that it can significantly improve puncture success rate and shortened operation time.

Towards an optimal model for gastric cancer peritoneal metastasis: current challenges and future directions

Peritoneal metastasis is a challenging aspect of clinical practice for gastric cancer. Animal models are crucial in understanding molecular mechanisms, assessing drug efficacy, and conducting clinical intervention studies, including those related to gastric cancer peritoneal metastasis. Unlike other xenograft models, peritoneal metastasis models should not only present tumor growth at the transplant site, but also recapitulate tumor cell metastasis in the abdominal cavity. Developing a reliable model of gastric cancer peritoneal metastasis involves several technical aspects, such as the selection of model animals, source of xenograft tumors, technology of transplantation, and dynamic monitoring of the tumor progression. To date, challenges remain in developing a reliable model that can completely recapitulate peritoneal metastasis. Thus, this review aims to summarize the techniques and strategies used to establish animal models of gastric cancer peritoneal metastasis, providing a reference for future model establishment.

Magnetic anchor technique assisted laparoscopic cholecystectomy in swine

Magnetic anchor device based on the principle of magnet heteropolar attraction can assist laparoscopic surgery and reduce abdominal wall trauma. This study explored the feasibility of use of our self-designed magnetic anchor device for reduced-port laparoscopic cholecystectomy (LC) through animal experiments. Twelve experimental pigs (15-20 kg) were randomly divided into study group (magnetic anchor technique assisted 2-port LC, n = 6) and control group (conventional 3-port LC, n = 6). Operative time, intraoperative blood loss, and postoperative complications were compared between the two groups. LC was successfully performed in all 12 pigs. There was no significant between-group difference with respect to operative time (study group: 35.83 ± 5.12 min; control group: 34.50 ± 5.13 min, P = 0.662) or intraoperative blood loss (< 50 mL per animal in both groups). In the experimental group, there was no malfunction of the magnetic anchoring device, the use process was smooth, and the tissue traction and surgical field exposure were satisfactory. There were no perioperative complications such as bile duct injury, bile leakage, or bleeding in both groups. We demonstrated the feasibility of use of the self-designed magnetic anchor device in reduced-port LC. The device has important clinical application value.

An experimental study of magnetic compression technique for ureterovesical anastomosis in rabbits

This study aimed to explore the feasibility of the magnetic compression technique (MCT) for ureterovesical anastomosis in a rabbit model with ureteral obstruction. The distal ureteral obstruction model using female New Zealand rabbits was induced by ligating the distal end of the right ureter with silk thread for four weeks. A pair of cylindrical NdFeB magnets (daughter magnet and parent magnet) with a hole in the center was used for the ureterovesical anastomosis. The daughter magnet and the parent magnet were respectively placed close to the obstruction site through the dilated proximal ureter and urethra, and then the daughter-parent magnets pair was attracted together automatically. Postoperative X-rays were taken to confirm the position of the magnets. The anastomotic stoma specimens were obtained two weeks postoperatively, and the anastomotic stoma formation was observed by the naked eye and histological staining. The operation time and the anastomotic burst pressure were measured. The ureter was significantly dilated in the fourth week after ligation, which satisfied the placement of the daughter magnet. The ureterovesical magnet placements were successfully performed in ten experimental rabbits, with an operation time of 36.5 ± 6.09 min. The parent and daughter magnets attracted each other well and were subsequently removed through the urethra two weeks postoperatively, resulting in the establishment of ureterovesical anastomosis. The anastomotic burst pressure was 147.5 ± 14.59 mmHg. Gross specimens and histological examination of the anastomotic stoma showed that the anastomotic stoma healed well. MCT is feasible and simple for ureterovesical anastomosis.

Creation of gastroenteric anastomosis through natural orifice in rats by magnetic compression technique

BACKGROUND

Being one of the core techniques of magnetic surgery, magnetic compression technique (MCT) has been used for digestive tract anastomosis reconstruction in experimental studies. This study verified the feasibility of gastroenteric anastomosis through natural orifice using MCT in rats.

METHODS

The parent and daughter magnets were designed and manufactured for oral and anal insertion in 20 Sprague-Dawley rats. After anesthesia, the parent magnet was inserted into the colon spleen area through the anus, and the daughter magnet was inserted into the stomach through the mouth. Then the two magnets were positioned to attract each other and bind together. The position of the two magnets was monitored using X-ray. The time required for the formation of the anastomosis and expulsion of the magnets were recorded. 2 weeks later, the animal was sacrificed and the anastomotic specimen was obtained which was observed under naked eye and microscope.

RESULTS

The gastroenteric anastomosis was successfully performed via natural orifices in 18 out of 20 rats. The mean time to construct the anastomosis was 3.78 ± 0.88 min. X-ray examination showed that the magnets were in the appropriate position in 17 rats. The magnets were excreted in 9.47 ± 1.62 days after surgery. The gross and microscopic examination of the specimen showed that the anastomoses were patent and the mucosa at the anastomotic was smooth. The mean bursting pressure of the anastomosis was 136.94 ± 6.79 mmHg.

CONCLUSION

It is feasible to perform gastroenteric anastomosis through natural orifices by MCT.

Establishment of Yan-Zhang's staging of digestive tract magnetic compression anastomosis in a rat model

Magnetic compression anastomosis, also known as magnamosis, is a safe and feasible method for digestive tract anastomosis. However, the pathological process involved in magnamosis of the digestive tract has not been investigated. This study aimed to establish the stages of digestive tract magnamosis in a rat model. Eighty-four Sprague–Dawley albino rats (200–250 g) were randomly divided into 14 groups (n = 6 per group). All rats underwent colonic magnamosis. Starting from postoperative day (POD) 1, one group of rats was sacrificed every other day to obtain the specimens. Burst pressure at the anastomotic site of each specimen was examined. Gross and histological examination of the anastomotic site was performed to establish the stages of the digestive tract magnamosis. Colonic magnamosis was successfully performed in all rats and the mean anastomosis time was 5.62 ± 0.91 min. The postoperative survival rate was 100%. The lowest anastomotic burst pressure was 78.33 ± 3.44 mmHg on POD3. The anastomotic burst pressure gradually increased and stabilized on POD21. Macroscopic and histological examination showed that the anastomotic mucosal and serosal layer did not heal on POD1. The serosal layer of the anastomosis healed by adhesion on POD3, and the mucosal layer began to heal on POD3-11 and was established by POD21. According to the anastomotic bursting pressure, digestive tract magnamosis can be staged into the magnetic maintenance, fragile, strengthening, and stable phases, which on histology correspond to the serosal adhesion formation, serosal healing, mucosal healing, and stereotyping, respectively.

A novel magnetic compression technique for cystostomy in rabbits

Magnetic compression technique (MCT) is a popular new anastomosis method. In this paper, we aimed to explore the feasibility of use of MCT for performing cystotomy in rabbits. The parent magnets and daughter magnets for rabbit cystostomy were designed and manufactured according to the anatomical characteristics of rabbit lower urinary tract. Twelve female New Zealand rabbits were used as animal models. After anesthesia, a daughter magnet was inserted into the bladder through the urethra, and the parent magnet was placed on the body surface projection of the bladder over the abdominal wall. The two magnets automatically attract each other. Postoperatively, the state of magnets was monitored daily, and the time when the magnets fell off was recorded. Cystostomy with MCT was successfully performed in all twelve rabbits. The mean operation time was 4.46 ± 0.75 min. The magnets fell off from the abdominal wall after a mean duration of 10.08 ± 1.62 days, resulting in the formation of bladder fistula. Macroscopic and microscopic examination showed that the fistula was well formed and unobstructed. The junction between bladder and abdominal wall was tight and smooth. We provide preliminary experimental evidence of the safety and feasibility of cystostomy based on MCT.