Ultra trace adsorptive stripping voltammetric determination of atrazine in soil and water using mercury film electrode

Visible-light-driven photoelectrochemical sensing platform based on BiOI nanoflowers/TiO2 nanotubes for detection of atrazine in environmental samples

In this work, a visible-light-driven photoelectrochemical (PEC) sensing platform was developed based on BiOI nanoflowers/TiO₂ nanotubes (BiOI NFs/TiO₂ NTs) for detection of atrazine (ATZ). The BiOI NFs/TiO₂ NTs p-n heterojunctions synthesized by decorating BiOI NFs on TiO₂ NTs via simple hydrothermal approach exhibit strong visible-light absorption ability, high photocurrent response and PEC activity. Thus BiOI NFs/TiO₂ NTs heterostructures were first explored to act as the photoelectrode for the immobilization of the anti-ATZ aptamer to develop a PEC sensing platform. The design PEC aptasensing platform exhibits prominent analytical performance for determination of ATZ with a low detection limit of 0.5 pM under visible-light irradiation, and displays good selectivity for ATZ in the control experiments. The superior behavior of the sensing platform could be ascribed to the design of the appropriate sensing material with tubular microstructure, excellent PEC response of the photoelectrode, and the large loading amount of aptamer. Meanwhile, the PEC sensing platform was used to determine ATZ in environmental samples and a satisfied result was obtained.

Electrospun tin (IV) oxide nanofiber based electrochemical sensor for ultra-sensitive and selective detection of atrazine in water at trace levels

Atrazine, a class 3a carcinogen, is a pesticide of chloro triazine family and is known to severely affect the human endocrine system upon consumption. The toxic effects of atrazine cause damage not only to the humans but also to animals and plants. In lieu of the detrimental effects of atrazine on environment, it is essential to develop a sensor platform capable of its detection in water. Here, we propose ultrasensitive electrochemical detection of atrazine using electrospun SnO₂ nanofibers. In this study, the nanofibers have been characterized using Field Emission Spectroscopy, X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis-NIR spectroscopy and Fourier transform infrared spectroscopy (FTIR). Using a label-free transduction, we have detected atrazine in fairly low concentrations, with the limit of detection being 0.9 zM and the sensitivity being 4.11 (μA/μM)/cm², in a wide dynamic detection range varying from 1 zM to 1 μM. Furthermore, we have reported atrazine detection in trace levels in spiked real time water samples, which is an essential step in ensuring that the sensing platform can be deployed for practical applications. In addition to this, the sensor exhibits excellent selectivity, reasonable stability (when stored at 4 °C), and good interference-resistance.

Plastic antibody based surface plasmon resonance nanosensors for selective atrazine detection

This study reports a surface plasmon resonance (SPR) based affinity sensor system with the use of molecular imprinted nanoparticles (plastic antibodies) to enhance the pesticide detection. Molecular imprinting based affinity sensor is prepared by the attachment of atrazine (chosen as model pesticide) imprinted nanoparticles onto the gold surface of SPR chip. Recognition element of the affinity sensor is polymerizable form of aspartic acid. The imprinted nanoparticles were characterized via FTIR and zeta-sizer measurements. SPR sensors are characterized with atomic force microscopy (AFM), scanning electron microscopy (SEM), Fourier transform infrared spectrophotometry (FTIR) and contact angle measurements. The imprinted nanoparticles showed more sensitivity to atrazine than the non-imprinted ones. Different concentrations of atrazine solutions are applied to SPR system to determine the adsorption kinetics. Langmuir adsorption model is found as the most suitable model for this affinity nanosensor system. In order to show the selectivity of the atrazine-imprinted nanoparticles, competitive adsorption of atrazine, simazine and amitrole is investigated. The results showed that the imprinted nanosensor has high selectivity and sensitivity for atrazine.

Carbon paste electrode modified with cuo-nanoparticles as a probe for square wave voltammetric determination of atrazine

BACKGROUND

Atrazine (ATZ) is a widely used herbicide in most countries because of its low cost and good selectivity. The concentration of ATZ that the EPA considers safe to consume in drinking water is 3 ppb. Therefore, recently, there have been concerns about its determination in trace levels. This compound is not electro-active, so in this research indirect electrochemical method for its detection in low levels was proposed.

OBJECTIVES

The main aim of this study is the indirect determination of ATZ in water samples by voltammetry using nano-particle modified electrode.

MATERIALS AND METHODS

A nano-CuO modified carbon paste electrode (NMCPE) is constructed and its application for indirect square wave voltammetric (SWV) detection of ATZ is reported. The sensing performance mechanism of the nano-CuO modified carbon paste electrode toward atrazine is due to complexation of the analyte with Cu (II) ion. The peak current for copper (II) reduction decreases with increase in the ATZ concentration and is monitored for its determination. Instrumental and chemical parameters influencing the detection of ATZ were optimized.

RESULTS

The results revealed that decrease in peak current was proportional to ATZ concentration over the range of 5-75 ng/mL. The limit of detection (LOD) and limit of quantification (LOQ) were 2 ng/mL and 5.6 ng/mL (n = 20), respectively. The relative standard deviation (n = 10) for the determination of 10 and 50 ng/mL of ATZ solution was estimated as 4.9% and 4.2 %, respectively.

CONCLUSIONS

This easily fabricated electrode together with the fast and sensitive SW voltammetry was successfully applied for the determination of concentration of ATZ at trace levels, in different water samples.

Simultaneous spectrophotometric determination of atrazine and cyanazine by chemometric methods

A spectrophotometric method for the simultaneous determination of two herbicides, atrazine and cyanazine, is described for the first time based on their reaction with p-aminoacetophenone in the presence of pyridine in hydrochloric acid medium. The absorption spectra were measured in the wavelength range of 400-600 nm. The optimized method indicated that individual analytes followed Beer's law in the concentration ranges for atrazine and cyanazine were 0.2-3.5 mg L(-1) and 0.3-5.0 mg L(-1), and the limits of detection for atrazine and cyanazine were 0.099 and 0.15 mg L(-1), respectively. The original and first-derivative absorption spectra of the binary mixtures were performed as a pre-treatment on the calibration matrices prior to the application of chemometric models such as classical least squares (CLS), principal component regression (PCR), partial least squares (PLS). The analytical results obtained by using these chemometric methods were evaluated on the basis of percent relative prediction error and recovery. It was found that the application of PCR and PLS models for first-derivative absorbance data gave the satisfactory results. The proposed methods were successfully applied for the simultaneous determination of the two herbicides in several food samples.