Enzyme-free sandwich-type electrochemical immunosensor for CEA detection based on the cooperation of an Ag/g-C3N4-modified electrode and Au@SiO2/Cu2O with core-shell structure

Electrochemical immunosensor based on hollow Pt@Cu2O as a signal label for dual-mode detection of procalcitonin

As a reliable biomarker to evaluate the severity of sepsis, sensitive and accurate detection of procalcitonin (PCT) is essential. In this study, a dual-mode electrochemical immunosensor based on Au/ZIF-8 as substrate and Pt@Cu2O as signal label was constructed for the detection of PCT. By loading Au nanoparticles onto rhombic dodecahedral ZIF-8, the substrate (Au/ZIF-8) has large specific surface area and can immobilize antibody (Ab1) by Au-N bonds. Meanwhile, hollow Pt@Cu2O nanocomposite with excellent peroxidase-like activity and electrocatalytic activity were synthesized as signal label. In the process of electrochemical testing, Pt@Cu2O catalyzed the reduction of hydrogen peroxide (H2O2) and further promotes the oxidation of hydroquinone (HQ) to achieve the synergistic amplification of electrochemical signals. The proposed immunosensor detected PCT by amperometric i-t and differential pulse voltammetry (DPV) tests with a good linear response and low limit of detection (i-t: 0.70 fg/mL and DPV: 0.40 fg/mL) in the range of 10 fg/mL∼100 ng/mL. The immunosensor exhibited excellent sensitivity and accuracy, indicating the potential application of this method for PCT detection.

A new strategy for enhanced electrochemically activation of persulfate on B and Co co-modified carbon felt in flow-through system for efficient organic pollutants degradation

Electrochemical activation of persulfate (EA-PS) is gradually attracting attention as an emerging method for wastewater treatment. In this study, a novelty flow-through EA-PS system was first attempted for pollutants degradation using boron and cobalt co-doping carbon felt (B, Co-CF) as the cathode. SEM images, XPS and XRD spectra of B, Co-CF were investigated. The optimal doping ration between B and Co was 1:2. Increasing current density, PS concentration and flow rate, decreasing initial pH accelerated the removal of AO7. The mechanism involved in EA-PS were the comprehensive effect of DET, •OH and SO4•-. B, Co-CF cathode for flow-through system was stable with five cycles efficient AO7 decay performance. EA-PS in flow-through system was an efficient method with low cost and efficient pollutants degradation. This work provides a feasible strategy for synergistically enhancing PS activation and promoting the degradation of organic pollutants.

Impedimetric aptasensor based on MOF based composite for measuring of carcinoembryonic antigen as a tumor biomarker

In this research, gold nanoparticle (GNPs)-modified metal-organic framework/reduced graphene oxide (MOF(801)/rGO) hybrid was employed to design a new aptasensor for carcinoembryonic antigen (CEA) quantification in biological sample. The sensing ability of the electrode for CEA biomarker was examined with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry procedures. Besides, CEA was electrochemically quantified by the EIS method. With respect to the high surface-to-volume ratio of MOF(801) and the good electron transfer ability of rGO, the proposed sensor displayed notable sensitivity and reliability in the CEA analysis. The derived electrode showed an appreciable detection limit of 0.8 pg L-1 using EIS protocol. In addition, the present aptasensor revealed diverse advantages including anti-interference property, wide linear range (0.0025-0.25 ng L-1), convenience and high efficiency toward CEA quantification. More importantly, the performance of the suggested assay remains unchanged in analysis of CEA in body fluids. The established assay demonstrates that the suggested biosensor is a promising device in clinical diagnosis.

Silver nanoparticles in electrochemical immunosensing and the emergence of silver-gold galvanic exchange detection

Nanoparticle-based electrochemical immunosensors demonstrate high sensitivity toward biomarker detection due to the large surface area of the nanoparticles and their ability to amplify the signal of the target molecule. Additionally, they have a fast response time, relatively lower cost, and can be easily miniaturized for point-of-care applications. Among noble metals, silver nanoparticles (AgNPs) have been extensively used in electrochemical sensors due to their unique properties, such as catalytic activity and excellent electrical conductivity. This Feature Article describes six approaches for incorporating AgNPs in electrochemical platforms, featuring the most recent developments in the silver-gold galvanic exchange-based detection strategy. With a few exceptions, many of these detection methods use AgNP oxidation into Ag+ ions, followed by electrodeposition of Ag+ ions onto the working electrode as zero-valent Ag metal and a final stripping step using a voltammetric technique. Combining these steps provides desirable low detection limits and good sensitivity for various biomarkers. A few other methods involved the reduction of Ag+ ions and depositing them as Ag metal onto the electrode using a reagent mixture so that the striping analysis could be performed. Typically, this reagent mixture includes Ag+ ions, a reducing agent, or an enzyme substrate. Besides, AgNPs have also been directly used to modify the surface of electrodes to facilitate kinetically favored redox-mediated electrochemical reactions. In addition to Ag detection methods, this report will also provide recent examples to illustrate how the size and shape of AgNPs impact the detection limits and sensitivity of an electrochemical assay. Finally, we discuss recent developments in lab-on-a-chip type immunosensors designed explicitly for Ag-based metalloimmunoassay detection, and we envision that this article will provide a comprehensive summary of the operational principles and new insights into such immunoassay systems.

Label-free electrochemical immunosensor based on staphylococcal protein a and AgNPs-rGO-Nf for sensitive detection of virginiamycin M1

Virginiamycin (VIR), a feed additive, is used to promote pig and poultry growth. However, it is hazardous to human health. This work described a label-free electrochemical immunosensor based on silver nanoparticles-reduced graphene oxide (AgNPs-rGO) nanocomposites and staphylococcal protein A (SPA) for the first time to directly detect the residual marker VIR M1. Good catalytic currents for oxygen reduction reaction were apparently obtained after the modification of nanocomposites on gold electrode. Nanocomposites were characterized using UV-Vis, X-ray diffraction (XRD) patterns, Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). SPA was targeted to immobilize VIR M1 monoclonal antibody (mAb) by binding to Fc region of antibody. The proposed immunosensor showed a wide linear range from 0.25 ng mL^-1 to 100 ng mL^-1, providing detection limit (LOD) of 0.18 ng mL^-1 of VIR M1. Recovery rates ranged from 92.27% to 98.84%, and relative standard deviation (RSD) was not above 6.6%, indicating the immunosensor could detect VIR M1 in actual samples with high accuracy. The sensor showed good selectivity, reproducibility and stability and could be considered as a potential tool for detection of VIR M1 in feed and animal derived food.

An integrated and flexible PDMS/Au film-based electrochemical immunosensor via Fe–Co MOF as a signal amplifier for alpha fetoprotein detection

Ultrasensitive determination of tumor marker (TM) is of great significance in cancer prevention and diagnosis. Traditional TM detection methods involve large instrumentation and professional manipulation, which complicate the assay procedures and increase the cost of investment. To resolve these problems, an integrated electrochemical immunosensor based on the flexible polydimethylsiloxane/gold (PDMS/Au) film with Fe-Co metal-organic framework (Fe-Co MOF) as a signal amplifier was fabricated for ultrasensitive determination of alpha fetoprotein (AFP). First, gold layer was deposited on the hydrophilic PDMS film to form the flexible three-electrode system, and then the thiolated aptamer for AFP was immobilized. Afterward, the aminated Fe-Co MOF possessing high peroxidase-like activity and large specific surface area was prepared by a facile solvothermal method, and subsequently the biofunctionalized MOF could effectively capture biotin antibody (Ab) to form MOF-Ab as a signal probe and amplify the electrochemical signal remarkably, thereby realizing highly sensitive detection of AFP with a wide linear range of 0.01-300 ng/mL and a low detection limit of 0.71 pg/mL. In addition, the PDMS based-immunosensor showed good accuracy for assaying of AFP in clinical serum samples. The integrated and flexible electrochemical immunosensor based on the Fe-Co MOF as a signal amplifier demonstrates great potential for application in the personalized point-of-care (POC) clinical diagnosis.

A microfluidic immunosensor for automatic detection of carcinoembryonic antigen based on immunomagnetic separation and droplet arrays

Diagnosis of cancer by biomarkers plays an important role in human health and life. However, current laboratory techniques for detecting cancer biomarkers still require laborious and time-consuming operation by skilled operators and associated laboratory instruments. This work presents a colorimetric biosensor for the rapid and sensitive detection of carcinoembryonic antigen (CEA) based on an automated immunomagnetic separation platform and a droplet array microfluidic chip with the aid of an image analysis system. Immunomagnetic nanoparticles (MNPs) were used to capture CEA in the samples. CEA-detecting antibodies and horseradish peroxidase (HRP) were modified on polystyrene microspheres (PS), catalysing hydrogen peroxide and 3,3',5,5'-tetramethylbenzidine (TMB) as signal outputs. Color reaction data were analyzed to establish a CEA concentration standard curve. The movement of MNPs between droplets in the microfluidic chip is achieved using an automatically programmable magnetic control system. This colorimetric biosensor has been used for the simultaneous detection of six CEA samples ranging from 100 pg mL^-1 to 100 ng mL^-1 with a detection limit of 14.347 pg mL^-1 in 10 min, following the linear equation: y = -4.773 ln(x) + 156.26 with a correlation of R² = 0.9924, and the entire workflow can be completed within 80 minutes. The microfluidic immunosensor designed in this paper has the advantages of low cost, automation, low sample consumption, high throughput, and promising applications in biochemistry.

Dual-mode immunosensor based on Cu-doped Mo2C nanosheets as signal labels

A method for detecting of Carcinoembryonic antigen(CEA) with improved accuracy is urgently needed. In this work, a dual-mode immunosensor for accurate detection of CEA was fabricated, which used a Cu-doped Mo₂C co-catalyst as an enhancer. Especially, Cu-doped Mo₂C presents a strong different pulse voltammetry (DPV) signal for the electron transfer between Cu²⁺ and Cu⁺, without the addition of K₃[Fe(CN₆)] and other electron transfer mediators, but also shows high electrocatalytic activity towards H₂O₂ redox reactions. So that detection sensitivity of the chronoamperometry (CA) was enhanced. Furthermore, characterized by excellent conductivity, highly ordered pore distribution and great surface area, Ti₃C₂ Mxenes can be effective in promoting electron transfer and loading a large number of AuNPs. In the meantime, AuNPs can also immobilize CEA-Ab₁ through Au-N bonds. Based on a Cu-Mo₂C-Au dual-signal indicator, Ti₃C₂ Mxene-Au as the matrix, the immunsosensor was developed to achieve dual-signal detection of CEA. Satisfactory detection ranges (1 fg.mL^-1 to 40 ng.mL^-1) were obtained with limits of detection of 0.33 fg.ml^-1 (DPV) and 1.67 fg.ml^-1 (CA), respectively. Therefore, the prepared electrochemical immunosensor has good application prospects for the detection of CEA.

Combining quasi-ZIF-67 hybrid nanozyme and G-quadruplex/hemin DNAzyme for highly sensitive electrochemical sensing

Zeolitic imidazolate frameworks (ZIFs), a famous subfamily of metal-organic frameworks (MOFs), are considered promising electrocatalysts. Herein, ZIF-67 was selected as an electrocatalyst for designing electrochemical sensors due to having the best electrocatalytic activity in ZIFs. To overcome the insufficient electrocatalytic activity of ZIFs, ZIF-67 derivatives (QZIF-67-X, where X represents calcination time) were obtained by calcining at 250 °C for a certain time. The porous structure of the precursor in QZIF-67-X is maintained, exposing more active centers. QZIF-67-X could accelerate electron transfer and lead to improve the electrocatalytic performance. Moreover, QZIF-67-2 was chosen as an Au nanoparticle-supported nanocarrier to further bind G-quadruplex/hemin DNAzymes with strong catalytic activity due to the best supporting activity of QZIF-67-2 among QZIF-67-X. The synergistic catalysis of QZIF-67-2 and G-quadruplex/hemin DNAzymes effectively amplified the reduction current signal of H₂O₂. The linear range of the prepared electrochemical sensor was 2 μM-65 mM, and the detection limit was 1.2 μM. Moreover, the real-time detection of H₂O₂ from HepG2 cells was achieved by the sensor, providing a novel technique for efficient anticancer drug evaluation. These results suggested that QZIF-67 can be utilized as an efficient electrocatalyst for improving the sensitivity of sensors.

Investigating immunosensor for determination of SD-biomarker-Aβ based on AuNPs/AC@PANI@CS modified electrodes with amplifying the signal

Sleep debt (SD) is one of the important triggers for causing not only physiological and mental illness but also dangerous work. Therefore, achieving an early and objective assessment of SD is of great significance in the precaution against SD-related diseases and unsafe work. Here, an ultrasensitive electrochemical immunosensor was constructed for analysis of SD biomarker amyloid-β (Aβ). The gold nanoparticles/chitosan-coated polyaniline-functionalized activated carbon (AuNPs/AC@PANI@CS) composites were employed as the sensing platforms. Since PANI and AC can form an effective conductive path, it can effectively enhance the penetration of electrolytes on the electrode surface and the rapid transport of charges and ions, significantly enhancing the electrochemical response signal of the immunosensor. Under the optimized experimental conditions, the fabricated immunosensor had a wide linear range of 1.95 pg mL^-1 to 1000.00 pg mL^-1, with a low detection limit of 0.014 pg mL^-1. This study not only provides an effective method for the accurate and rapid detection of Aβ, but also offers a novel evaluation strategy for the objective assessment of SD and the study of related pathological mechanisms.

Recent Advances in Electrochemical Immunosensors with Nanomaterial Assistance for Signal Amplification

Electrochemical immunosensors have attracted immense attention due to the ease of mass electrode production and the high compatibility of the miniature electric reader, which is beneficial for developing point-of-care diagnostic devices. Electrochemical immunosensors can be divided into label-free and label-based sensing strategies equipped with potentiometric, amperometric, voltammetric, or impedimetric detectors. Emerging nanomaterials are frequently used on electrochemical immunosensors as a highly rough and conductive interface of the electrodes or on nanocarriers of immobilizing capture antibodies, electroactive mediators, or catalyzers. Adopting nanomaterials can increase immunosensor characteristics with lower detection limits and better sensitivity. Recent research has shown innovative immobilization procedures of nanomaterials which meet the requirements of different electrochemical immunosensors. This review discusses the past five years of advances in nanomaterials (metal nanoparticles, metal nanostructures, carbon nanotubes, and graphene) integrated into the electrochemical immunosensor. Furthermore, the new tendency and endeavors of nanomaterial-based electrochemical immunosensors are discussed.

Electrochemical Immunosensor Using Electroactive Carbon Nanohorns for Signal Amplification for the Rapid Detection of Carcinoembryonic Antigen

In this work, a novel sandwich-type electrochemical immunosensor was developed for the quantitative detection of the carcinoembryonic antigen, an important tumor marker in clinical tests. The capture antibodies were immobilized on the surface of a gold disk electrode, while detection antibodies were attached to redox-tagged single-walled carbon nanohorns/thionine/AuNPs. Both types of antibody immobilization were carried out through Au-S bonds using the novel photochemical immobilization technique that ensures control over the orientation of the antibodies. The electroactive SWCNH/Thi/AuNPs nanocomposite worked as a signal tag to carry out both the detection of carcinoembryonic antigen and the amplification of the detection signal. The current response was monitored by differential pulse voltammetry. A clear dependence of the thionine redox peak was observed as a function of the carcinoembryonic antigen concentration. A linear detection range from 0.001-200 ng/mL and a low detection limit of 0.1385 pg/mL were obtained for this immunoassay. The results showed that carbon nanohorns represent a promising matrix for signal amplification in sandwich-type electrochemical immune assays working as a conductive and binding matrix with easy and versatile modification routes to antibody and redox tag immobilization, which possesses great potential for clinical diagnostics of CEA and other biomarkers.

Applications of electrochemical biosensors based on 2D materials and their hybrid composites in hematological malignancies diagnosis

Hematological malignancies encompass a wide variety of severe diseases that pose a serious threat to human health. Given the fact that hematological malignancies are difficult to treat due to their unpredictable and rapid deterioration and high rates of recurrence, growing attention has been paid to their early screening and diagnosis. However, developing a rapid and effective diagnostic tool featuring a noninvasive sampling technique is still extremely challenging. In recent years, novel nanomaterials-based electrochemical biosensors have attracted great interest because of such advantages as simple operation, low cost, fast response, etc. As a kind of rising nanomaterials, two-dimensional materials have excellent electronic and chemical properties, which have been proven to improve the performance of electrochemical biosensors. This review summarizes the applications of different types of electrochemical biosensors (nucleic acid sensors, immunosensors, aptamer biosensors, and cytosensors) based on two-dimensional materials in the detection of biological molecules related to hematological malignancies. Two-dimensional materials-based electrochemical biosensors designed for the diagnosis of leukemia could rapidly detect the target biomolecules at a trace level and show great merits such as wide linear range, low detection limit, high sensitivity, excellent selectivity, and cost-effectiveness. In addition, these biosensors have also achieved satisfactory results in the diagnosis of lymphoma and multiple myeloma. Thus, two-dimensional materials-based electrochemical biosensors are attractive for the early diagnosis of hematological malignancies in clinical practice. Nevertheless, more efforts are still required to further improve the performance of electrochemical biosensors. In this review, we propose the possible main concerns in the design of future two-dimensional materials-based electrochemical biosensors, involving the development of sensors for synchronous detection of diverse target biomolecules, the exploration of other superior two-dimensional materials, the simplification of the sensors fabrication process, the construction of new hybrid structures and how to avoid possible environmental issues.

An ultrasensitive immunosensor based on cellulose nanofibrils/polydopamine/Cu-Ag nanocomposite for the detection of AFP

In this work, an ultrasensitive immunosensor for amperometric determination of alpha-fetoprotein (AFP) was developed utilizing Ag and Cu nanoparticles on polydopamine (PDA) functionalized cellulose nanofibrils (CNFs) composite (CNFs/PDA/Cu-Ag) as signal amplifier. PDA was first prepared by self-polymerizing of dopamine, and then was adsorbed on CNFs. The obtained CNFs/PDA was applied as substrate to electrolessly deposit Cu-Ag nanoparticles, using NaBH₄ as reducing agent. The structure and morphology of the synthesized CNFs/PDA/Cu-Ag nanocomposite were analyzed through Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, scanning electron microscopy, particle size analyzer and transmission electron microscopy. The CNFs/PDA/Cu-Ag modified glassy carbon electrode can fix AFP antibody (Ab), and further capture AFP specifically. Electrochemical impedance spectroscopy and cyclic voltammetry were used to characterize the assembly process of immunosensor. The immunoreaction was amplified by electrocatalytical reduction of H₂O₂ on Cu-Ag nanoparticles, through which AFP was quantitatively detected. The developed sensor exhibits wide linear range of 0.01-100 ng mL^-1 (R² = 0.9963) with low detection limit of 4.27 pg mL^-1 (S/N = 3). In addition, it has been used for the detection of AFP in human serum, manifesting its preeminent application prospect in early liver cancer diagnosis.

Electrochemical Signal Substance for Multiplexed Immunosensing Interface Construction: A Mini Review

Appropriate labeling method of signal substance is necessary for the construction of multiplexed electrochemical immunosensing interface to enhance the specificity for the diagnosis of cancer. So far, various electrochemical substances, including organic molecules, metal ions, metal nanoparticles, Prussian blue, and other methods for an electrochemical signal generation have been successfully applied in multiplexed biosensor designing. However, few works have been reported on the summary of electrochemical signal substance applied in constructing multiplexed immunosensing interface. Herein, according to the classification of labeled electrochemical signal substance, this review has summarized the recent state-of-art development for the designing of electrochemical immunosensing interface for simultaneous detection of multiple tumor markers. After that, the conclusion and prospects for future applications of electrochemical signal substances in multiplexed immunosensors are also discussed. The current review can provide a comprehensive summary of signal substance selection for workers researched in electrochemical sensors, and further, make contributions for the designing of multiplexed electrochemical immunosensing interface with well signal.

Application of CuS/Au Heterostructure with peroxidase-like activity in immunosensors

Early detection of tumour markers is essential for the timely treatment of cancer to realise the sensitive detection of Carcinoembryonic antigen (CEA). We chose electrochemical immunosensor as a simple analytical...