Cathodes of membrane and packed manganese dioxide/titanium dioxide/graphitic carbon nitride/granular activated carbon promoted treatment of coking wastewater in microbial fuel cell

An overview of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils

The global problem of petroleum contamination in soils seriously threatens environmental safety and human health. Current studies have successfully demonstrated the feasibility of bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils due to their easy implementation, environmental benignity, and enhanced removal efficiency compared to bioremediation. This paper reviewed recent progress and development associated with bioelectrokinetic and bioelectrochemical remediation of petroleum-contaminated soils. The working principles, removal efficiencies, affecting factors, and constraints of the two technologies were thoroughly summarized and discussed. The potentials, challenges, and future perspectives were also deliberated to shed light on how to overcome the barriers and realize widespread implementation on large scales of these two technologies.

Degradation of levofloxacin in wastewater by photoelectric and ultrasonic synergy with TiO2/g-C3N4@AC combined electrode

A novel particle combined electrode named TiO₂/g-C₃N₄@AC (TGCN-AC) was prepared by loading TiO₂ and g-C₃N₄ on activated carbon through gel method, which was used to degrade levofloxacin (LEF) in pharmaceutical wastewater by photoelectric process. The remarkable physicochemical features of particle electrodes were verified by using diverse characterization techniques including SEM-EDS, XRD, FT-IR, BET and pH_ZPC. EIS-CV and photocurrent showed excellent electrocatalysis and photoelectrocatalysis performance of particle electrodes. The photocatalytic characteristics and fluorescence properties of the particle electrode were proved by UV-vis DRS and PL spectra measurements. Combined with Tauc's plot and Mott-Schottky plots curves, the E_CB and E_VB of particle electrodes were determined. The experiments on different influence factors such as pH, ultrasonic, aeration, current density and the concentration of LEF were carried out in the photoelectric reactor. Under the conditions of pH values 3.0, 200 W ultrasonic, 8 L/min aeration, the mass ratio of g-C₃N₄ and TiO₂ is 8%, after 4.0 h of photoelectric process, about 94.76% of LEF (20 mg/L) in water was degraded. TGCN-AC also has excellent reusability. The degradation rate of LEF can still reach 71.17% after repeated use for 6 times. Scavenger studies showed that h⁺ and O^2- were the main active species. By observing the colony size of E. coli, it was proved that the LEF in the effluent had no antibacterial activity. The degradation pathways of LEF was analyzed and drawn by HPLC-MS spectra.

Biological oxidation methods for the removal of organic and inorganic contaminants from wastewater: A comprehensive review

Enzyme-based bioremediation is a simple, cost-effective, and environmentally friendly method for isolating and removing a wide range of environmental pollutants. This study is a comprehensive review of recent studies on the oxidation of pollutants by biological oxidation methods, performed individually or in combination with other methods. The main bio-oxidants capable of removing all types of pollutants, such as organic and inorganic molecules, from fungi, bacteria, algae, and plants, and different types of enzymes, as well as the removal mechanisms, were investigated. The use of mediators and modification methods to improve the performance of microorganisms and their resistance under harsh real wastewater conditions was discussed, and numerous case studies were presented and compared. The advantages and disadvantages of conventional and novel immobilization methods, and the development of enzyme engineering to adjust the content and properties of the desired enzymes, were also explained. The optimal operating parameters such as temperature and pH, which usually lead to the best performance, were presented. A detailed overview of the different combination processes was also given, including bio-oxidation in coincident or consecutive combination with adsorption, advanced oxidation processes, and membrane separation. One of the most important issues that this study has addressed is the removal of both organic and inorganic contaminants, taking into account the actual wastewaters and the economic aspect.

A Review of Recent Advances in Microbial Fuel Cells: Preparation, Operation, and Application

The microbial fuel cell has been considered a promising alternative to traditional fossil energy. It has great potential in energy production, waste management, and biomass valorization. However, it has several technical issues, such as low power generation efficiency and operational stability. These issues limit the scale-up and commercialization of MFC systems. This review presents the latest progress in microbial community selection and genetic engineering techniques for enhancing microbial electricity production. The summary of substrate selection covers defined substrates and some inexpensive complex substrates, such as wastewater and lignocellulosic biomass materials. In addition, it also includes electrode modification, electron transfer mediator selection, and optimization of operating conditions. The applications of MFC systems introduced in this review involve wastewater treatment, production of value-added products, and biosensors. This review focuses on the crucial process of microbial fuel cells from preparation to application and provides an outlook for their future development.

Mechanism of stable power generation and nitrogen removal in the ANAMMOX-MFC treating low C/N wastewater

This study investigated the mechanism of enhanced power generation and nitrogen removal in an ANAMMOX-MFC reactor through subsequent acetate addition. Data showed that nearly 99% total nitrogen removal (≤1 mg L^-1) and 1.41 W m^-3 power generation were achieved synchronously under low COD/N (∼1.5) after the subsequent addition of acetate (100 mgCOD·L^-1). The columbic efficiency of the system has increased by 15 times (from 0.64% to 9.48%) after adding acetate. Batch tests showed that the denitrification and ANAMMOX progress occurred synchronously before acetate addition the nitrogen removal rate was accelerated. A distinct shift of bacterial community driven by acetate addition was discovered. The high throughput sequencing analysis indicated acetate addition stimulated the enrichment of denitrifiers, such as Aquimonas, Bradyrhizobium, Thauera, and the potential exoelectrogens changing from Comamonas to Pseudomonas. Functional genes forecasts based on KEGG database and COG database showed that the expressions of TCA functional genes were highly promoted in ANAMMOX-MFC, which demonstrated the enhanced electron transfer pathway driven by acetate addition under low COD/N ratio.

Recent progress in microbial fuel cells for industrial effluent treatment and energy generation: Fundamentals to scale-up application and challenges

Microbial fuel cells (MFCs) technology have the potential to decarbonize electricity generation and offer an eco-friendly route for treating a wide range of industrial effluents from power generation, petrochemical, tannery, brewery, dairy, textile, pulp/paper industries, and agro-industries. Despite successful laboratory-scale studies, several obstacles limit the MFC technology for real-world applications. This review article aimed to discuss the most recent state-of-the-art information on MFC architecture, design, components, electrode materials, and anodic exoelectrogens to enhance MFC performance and reduce cost. In addition, the article comprehensively reviewed the industrial effluent characteristics, integrating conventional technologies with MFCs for advanced resource recycling with a particular focus on the simultaneous bioelectricity generation and treatment of various industrial effluents. Finally, the article discussed the challenges, opportunities, and future perspectives for the large-scale applications of MFCs for sustainable industrial effluent management and energy recovery.

Three-dimensional biofilm electrode reactors (3D-BERs) for wastewater treatment

Three-dimensional biofilm electrode reactors (3D-BERs) are highly efficient in refractory wastewater treatment. In comparison to conventional bio-electrochemical systems, the filled particle electrodes act as both electrodes and microbial carriers in 3D-BERs. This article reviews the conception and basic mechanisms of 3D-BERs, as well as their current development. The advantages of 3D-BERs are illustrated with an emphasis on the synergy of electricity and microorganisms. Electrode materials utilized in 3D-BERs are systematically summarized, especially the critical particle electrodes. The configurations of 3D-BERs and their integration with wastewater treatment reactors are introduced. Operational parameters and the adaptation of 3D-BERs to varieties of wastewater are discussed. The prospects and challenges of 3D-BERs for wastewater treatment are then presented, and the future research directions are proposed. We believe that this timely review will help to attract more attentions on 3D-BERs investigation, thus promoting the potential application of 3D-BERs in wastewater treatment.

Plant microbial fuel cell: Opportunities, challenges, and prospects

Microbial fuel cells (MFCs) are considered as greener technologies for generation of bioenergy and simultaneously treatment of wastewater. However, the major drawback of these technologies was, rapid utilization of substrate by the microbes to generate power. This drawback is solved to a great extent by plant microbial fuel cell (PMFC) technology. Therefore, this review critically explored the challenges associated with PMFC technology and approaches to be employed for making it commercially feasible, started with brief introduction of MFCs, and PMFCs. This review also covered various factors like light intensity, carbon dioxide concentration in air, type of plant used, microbial flora in rhizosphere and also electrode material used which influence the efficiency of PMFC. Finally, this review comprehensively revealed the possibility of future intervention, such as application of biochar and preferable plants species which improve the performance of PMFC along with their opportunities challenges and prospects.

N-Doping of Graphene Aerogel as a Multifunctional Air Cathode for Microbial Fuel Cells

One of the main challenges faced by microbial fuel cells (MFCs) generating voltage is how to facilitate the oxygen reduction reaction (ORR) process using a specifically designed air cathode, especially by optimizing a three-phase catalytic interface and enhanced O₂ diffusion on it. Herein, a three-dimensional porous N-doped graphene aerogel (NGA) is polymerized onto a steel mesh (SM) to construct a simple structure of an air cathode (NGA-x/SM) via hydrothermal synthesis and subsequent freeze-drying treatment; more specifically, NGA was simultaneously used as an efficient ORR catalyst layer and breathable gas diffusion layer to improve the performance of MFCs. In this system, the NGA-5/SM (with a precursor concentration of x = 5.0 mg mL^-1) makes itself a perfect candidate to be used as an air cathode. Characterization parameters reveal that sub-micrometer micropores, defective multilayer structures, and the highest proportion of pyridinic-N (48.1%) exist in NGA-5/SM. Furthermore, electrochemical measurements demonstrate that it has an oxygen reduction peak potential of 0.63 V, a Tafel slope of 187 mV dec^-1, and closest 4e^- transfer pathway (n = 3.2-3.5). These data prove that a three-phase boundary can naturally form in NGA-5/SM, where the ORR occurs. More importantly, this work provides a proof of concept that a Pt-free air cathode could be prepared with high-efficiency NGA by a two-step preparation method to achieve a MFC maximum power density of 1593 mW m^-2.

An integrated biological-electrocatalytic process for highly-efficient treatment of coking wastewater

Coking wastewater is typically refractory, mainly due to its biological toxicity and complex composition. In this study, a novel integrated biological-electrocatalytic process consisting of two three-dimensional electrochemical reactors (3DERs), two biological aerated filters (BAFs), and a three-dimensional biofilm electrode reactor (3DBER) is developed for the advanced treatment of coking wastewater. 73.21% of chemical oxygen demand (COD), 38.02% of ammonium nitrogen (NH₄⁺-N) and 91.46% of nitrate nitrogen (NO₃^--N) are removed by 3DERs. BAFs mainly convert NH₄⁺-N to NO₃^--N through microbial nitrification. The 3DBER removes the residual NO₃^--N by bio-electrochemical denitrification. The integrated system can eliminate 74.72-83.27% of COD, 99.38-99.74% of NH₄⁺-N, and 69.64-99.83% of total nitrogen from coking wastewater during the continuous operation, as well as significantly reducing the toxicity of the wastewater. The superiorities of the integrated 3DERs/BAFs/3DBER system recommend the application of such biological-electrocatalytic technology in the treatment of highly toxic wastewater.