Predicting aerosol size distribution development in absorption columns

Purity control of simulated moving bed based on advanced fuzzy controller

Simulated moving bed (SMB) technology is considered one of the most successful techniques in chromatographic separation. However, due to the nonlinearity caused by discrete events and sensitivity to numerous separation performance parameters, purity control in SMB systems has been a challenging issue. Fuzzy controllers are increasingly popular in industrial environments due to their simplicity and effectiveness in handling nonlinearity. However, traditional fuzzy controllers used in industry often overlook considerations of error acceleration, resulting in slight deviations from target values under steady-state conditions and oscillatory behavior when system parameters change. This study proposes an advanced fuzzy controller, where in a series of experiments, the purity control targets for component B are set at 94% and 96%, and for component A are set at 96% and 96%, respectively. Experimental results indicate that the advanced fuzzy controller achieves higher precision, with an average deviation of around 0.1%, for both components B and A. Importantly, under variations in adsorbent parameter(from 0.01 to 0.03), feed concentration(from 4.5 to 5.2), and switching time(from 178 to 182), the experimental results demonstrate smoother control with the advanced controller, particularly when oscillations occur with conventional fuzzy controllers due to switching time variations, indicating robust control with the advanced fuzzy controller.

Multi-Scale Modeling and Study of Aerosol Growth in an Amine-based CO2 Capture Absorber

A monoethanolamine (MEA) aerosol growth model was developed to quantify the aerosol growth factor in an amine-based CO2 capture absorber that considers the gas-liquid interactions, and it is empirically validated by measuring the aerosol particle size and concentration. The aerosol growth model, using sucrose as the aerosol nuclei instead of sulfuric acid to prevent the corrosion of the test equipment, accurately predicted that the outlet aerosol size increased to the same level regardless of the sucrose concentration. It also found that particle concentration was the primary factor affecting aerosol growth and amine emissions. We found an inverse relationship between aerosol particle concentration and the aerosol size, while the MEA emissions were proportional to particle concentration.