Degradation of N-nitrosamines and 1,4-dioxane using vacuum ultraviolet irradiation (UV254+185 nm or UV172 nm)

Reverse osmosis membrane functionalized with aminated graphene oxide and polydopamine nanospheres plugging for enhanced NDMA rejection and anti-fouling performance

The use of reverse osmosis (RO) for water reclamation has become an essential part of the water supply owing to the ever-increasing water demand and the utmost performance of the RO membranes. Despite the global RO implementation, its inferior rejection against low molecular weight contaminants of emerging concerns (CECs) (i.e., N-nitrosodimethylamine (NDMA)) and propensity to fouling remain bottle-neck thus affecting process robustness for water reuse. This study aims to enhance both the rejection and antifouling properties of the RO membrane. Herein for the first time, we report RO membrane modification using polydopamine nanospheres (PDAns) followed by aminated-graphene oxide (AGO) deposition as an effective approach to overcome these challenges. The modification of the RO membrane using PDAns-AGO resulted in 89.3 ± 2.7% rejection compared to the pristine RO membrane which demonstrated 69.2 ± 2.1% NDMA rejection. This significant improvement can be ascribed to the plugging and shielding of defective areas (formed during interfacial polymerization) of the polyamide layer through active PDAns and AGO layers and to the added sieving mechanism that arose through narrow channels of the AGO owing to its reduction. Moreover, the in-situ and non-destructive fouling monitoring using optical coherence tomography (OCT) revealed that the PDAns-AGO coating enhanced both the anti-scaling and anti-biofouling characteristics. The improved hydrophilicity and bactericidal effect together with roughness and surface charge suppression synergistically enhanced anti-fouling properties. This study provides a new direction for safe and cost-effective water reuse practices. The membrane with high selectivity against CECs such as NDMA has the potential to eliminate permeate staging using second pass RO and other advanced oxidation processes which are utilized as a tertiary treatment to make reclaimed water suitable for potable/non-potable application.

Photolysis of chloramines in vacuum-UV and vacuum-UV/chlorine advanced oxidation processes for removal of 1,4-dioxane: Effect of water matrix, kinetic modeling, and implications for potable reuse

Advanced oxidation processes (AOPs) are a key step in eliminating persistent micropollutants in potable reuse trains. Under such conditions, chloramines are an inevitable component in the AOP feed water given their application as an antifouling agent for the upstream membrane processes. In cases when other oxidants, such as free chlorine, are to be used in the AOP treatment, the effect of background chloramines and any potential interplays between the oxidants should be considered. In this study, vacuum-UV (VUV) and VUV/Cl₂ have been proposed as promising AOP alternatives for potable reuse and the effect of chloramine photolysis has been considered on the removal of 1,4-dioxane. Results indicated that while presence of chloramine reduces the treatment efficiency in the VUV AOP, coexistence of free chlorine and chloramine oxidants significantly improves 1,4-dioxane degradation rates. Experimental data and kinetic modeling both confirmed the roles of OH^• and Cl₂^•- in 1,4-dioxane removal with 62.5% and 32.5% contribution in the VUV/Cl₂/chloramines, respectively. Among the other water matrix conditions, Cl^- was shown to improve the degradation rates while HCO₃^- suppressed the reactions by scavenging radical species. Overall, the findings of this research are informative for the design and development of VUV AOPs at small scale potable reuse facilities.

Drinking water treatment and associated toxic byproducts: Concurrence and urgence

Reclaimed water is highly required for environmental sustainability and to meet sustainable development goals (SDGs). Chemical processes are frequently associated with highly hazardous and toxic by-products, like nitrosamines, trihalomethanes, haloaldehydes, haloketones, and haloacetic acids. In this context, we aim to summarize the formation of various commonly produced disinfection by-products (DBPs) during wastewater treatment and their treatment approaches. Owing to DBPs formation, we discussed permissible limits, concentrations in various water systems reported globally, and their consequences on humans. While most reviews focus on DBPs detection methods, this review discusses factors affecting DBPs formation and critically reviews various remediation approaches, such as adsorption, reverse osmosis, nano/micro-filtration, UV treatment, ozonation, and advanced oxidation process. However, research in the detection of hazardous DBPs and their removal is quite at an early and initial stage, and therefore, numerous advancements are required prior to scale-up at commercial level. DBPs abatement in wastewater treatment approach should be considered. This review provides the baseline for optimizing DBPs formation and advancements in the remediation process, efficiently reducing their production and providing safe, clean drinking water. Future studies should focus on a more efficient and rigorous understanding of DBPs properties and degradation of hazardous pollutants using low-cost techniques in wastewater treatment.

Highly effective electrocatalytic reduction of N-nitrosodimethylamine on Ru/CNT catalyst

N-Nitrosodimethylamine (NDMA) is a commonly identified carcinogenic and genotoxic pollutant in water. In this study, we prepared Ru catalysts supported on carbon nanotube (Ru/CNT) and studied the electrocatalytic reduction of N-nitrosamines on Ru/CNT electrode in a three-electrode system. The results show that Ru-based catalyst exhibits a high activity of 793.3 μmol L^-1 gCat^-1 h^-1 for electrochemical reduction of NDMA. Reaction mechanism study discloses that the electrocatalytic reduction of NDMA is accomplished by both direct electron reduction and atomic H* mediated indirect reduction pathways. Further product analysis indicates that NDMA is finally reduced to dimethylamine (DMA) and ammonia. The reduction efficiency of NDMA strongly relies on cathode potential, initial NDMA concentration and solution pH. To verify the universality of Ru/CNT electrode, electrocatalytic reduction of three dialkyl N-nitrosamines with different alkyl groups was performed and Ru catalyst has high catalytic activities for the three N-nitrosamines, while the catalytic efficiency differs with their structures. Simultaneous electrochemical reduction of the three N-nitrosamines indicates that the reduction rates of N-nitrosamines follow the same order in the multiple-component system as that in the single-component system. Catalyst recycling results demonstrate that after 5 consecutive recycling runs Ru/CNT electrode remains almost identical catalytic activity to the fresh catalyst, manifesting the high catalytic stability of Ru/CNT electrode.

Potential of UV-B and UV-C irradiation in disinfecting microorganisms and removing N-nitrosodimethylamine and 1,4-dioxane for potable water reuse: A review

The ultraviolet (UV)-based advanced oxidation process (AOP) is a powerful technology for removing pathogenic microorganisms and contaminants of emerging concern (CECs) from water. AOP in potable water reuse has been predominantly based on traditional low-pressure mercury (LP-Hg) lamps at 254 nm wavelength, supplemented by hydrogen peroxide addition. In this review, we assessed the potential of unconventional UV wavelengths (UV-B, 280-315 nm and UV-C, 100-280 nm) compared to conventional one (254 nm) in achieving the attenuation of pathogens and CECs. At the same UV doses, conventional 254 nm LP-Hg lamps and other sources such as, 222 nm KrCl lamps and 265 nm UV-LEDs, showed similar disinfection capability for viruses, protozoa, and bacteria, and the effect of hydrogen peroxide (H₂O₂) addition on disinfection remained unclear. The attenuation levels of key CECs in potable water reuse (N-nitrosodimethylamine and 1,4-dioxane) by 185 + 254 nm LP-Hg or 222 nm KrCl lamps were generally greater than those by conventional 254 nm LP-Hg and other UV lamps. CEC degradation was generally enhanced by H₂O₂ addition. Overall, our review suggests that 222 nm KrCl or 185 + 254 nm LP-Hg lamps with the addition of H₂O₂ would be the best alternative to conventional 254 nm LP-Hg lamps for achieving target removal levels of both pathogens and CECs in potable water reuse.