Rheological properties of emulsion templated oleogels based on xanthan gum and different structuring agents

Natural oleogelators for the formulation of oleogels by considering their rheological and textural perspective; a review

A well-known method for reducing or swapping out undesirable and controversial fats in food is oleogelation. To quantify the effects of droplets-particle inclusion on the textural aspects of gelled systems, a thorough understanding of rheological behavior of oleogels (OGs) is necessary. Otherwise stated, a rational grasp of rheological characterization is essential for food development, optimization, and processing (when touching or putting food into the mouth, rheological flow qualities influence our perception). This narrative review primarily intends to investigate rheological and textural characteristics of various oleogelator-based OGs, such as operative connection between hardness, distortion, stresses, and rheological parameters like viscosity, elasticity, and viscoelasticity, as well as flow behavior and recovery. Expanding oleogelators concentration and synergistic interactions between them increase robustness and moduli values, as compared to single oleogelators. However, given the lack of information on the connection between the OGs' macroscopic rheological characteristics and their microstructural characteristics, this review presents state-of-the-art overview of various oleogelator-based OGs, highlighting the importance of structure-rheology relationships of OGs to provide advanced knowledge on the development of innovative OGs.

Ultrastable High Internal Phase Pickering Emulsions: Forming Mechanism, Processability, and Application in 3D Printing

High internal phase Pickering emulsions (HIPPEs) are versatile platforms for various applications owing to their low-density, solid-like structure, and large specific surface area. Here, naturally occurring polysaccharide-protein hybrid nanoparticles (PPH NPs) were used to stabilize HIPPEs with an internal phase fraction of 80% at a PPH NP concentration of 1.5%. The obtained HIPPEs displayed a gel-like behavior with excellent stability against centrifugation (10000g, 10 min), temperature (4-121 °C), pH (1.0-11.0), and ionic strength (0-500 mM). Confocal laser scanning microscope and cryo-scanning electron microscopy results showed that PPH NPs contributed to the stability of HIPPEs by effectively adsorbing and anchoring on the surface of the emulsion droplets layer by layer to form a dense 3D network barrier to inhibit droplet coalescence. The rheological analysis showed that the HIPPEs possessed a higher viscosity and lower frequency dependence with increasing PPH NP concentration, suggesting the potential application of such HIPPEs in three-dimensional (3D) printing, which was subsequently confirmed by a 3D printing experiment. This work provides highly stable and processable HIPPEs, which can be developed as facile and reusable materials for numerous applications. They can also be directly used for future food manufacturing, drug and nutrient delivery, and tissue reconstruction.

Tiger Nut Oil-Based Oil Gel: Preparation, Characterization, and Storage Stability

In this study, Tiger nut (Cyperus esculentus L.) oil-based oleogels were prepared using the emulsion template method with whey protein (WPI; 0.5-2.5% (w/v) and Xanthan gum (XG; 0.1-0.5% (w/v). The microstructure of the oleogels obtained from the high internal phase emulsion (HIPE) and an emulsion after further shearing were observed using an optical microscope and laser confocal microscopy. A series of rheological tests were conducted to evaluate the effect of WPI and XG concentrations on the strength of the emulsion and oleogel. The texture, oil holding capacity, and oxidative stability of oleogels were characterized. The results showed that XG alone could not form oleogel, while the concentration of WPI had more effect than XG. When WPI was at a fixed concentration, the viscoelasticity of HIPE increased with the addition of XG. This was due to the complexation of WPI and XG, forming a stable gel network between the tight emulsion droplets and thus giving it a higher viscoelasticity. With an increase in WPI concentration, the stability and viscoelasticity of the emulsion were increased, and the oil-holding capacity and gel strength of the oleogels were enhanced. Moreover, the addition of XG could significantly enhance the stability and viscoelasticity of the emulsion (p < 0.05), and an increase in the concentration had a positive effect on it. The oleogels showed high gel strength (G' > 15,000 Pa) and good thixotropic recovery when the XG concentration was higher than 0.3% (w/v). WPI (2.0%) and XG (>0.3%) could be used to obtain HIPE with good physicochemical and viscoelastic properties, which in turn lead to oleogels with minimal oil loss, viscoelastic and thixotropic recovery, and temperature stability. Compared with tiger nut oil-based oleogel, tiger nut oil contained more polyunsaturated fatty acids, which were more easily decomposed through oxidation during storage and had lower oxidation stability. This study provides a reference for the preparation of oleogels from food-approved polymers and provides additional theoretical support for their potential application as solid fat substitutes.

Flaxseed Gum/Arabic Gum/Tween 80-Based Oleogel as a Fat Substitute Applied in Emulsified Sausage: Physicochemical Properties, Sensory Attributes and Nutritional Quality

In the present study, flaxseed gum (FG), Arabic gum (GA) and Tween 80 were used to prepare oleogels through an emulsion-templated method, and the obtained oleogels were designed for the partial substitution of pork fat in emulsified sausage. An increment in FG concentrations enhanced the viscoelasticity of emulsions, which resulted in the improved stability of emulsion systems, with smaller droplet sizes. In addition, increased FG concentrations contributed to higher mechanical strength, denser network structure and lower oil loss of oleogels. As a fat substitute, the prepared oleogels improved the textural properties and nutritional quality of emulsified sausages. With the increase in the substitution level of oleogels, the hardness and chewiness of the emulsified sausage increased, and the cooking loss decreased. Meanwhile, the reformulation with oleogels decreased the saturated fat from 57.04 g/100 g lipid to 12.05 g/100 g lipid, while increasing the ratio of omega-6 to omega-3 essential fatty acids from 0.10 to 0.39. The obtained results demonstrated that the flaxseed gum/Arabic gum/Tween 80-based oleogels had huge potential to successfully replace pork fat in emulsified sausage products.

Food-Grade Oleogels: Trends in Analysis, Characterization, and Applicability

Currently, a large number of scientific articles can be found in the research literature in the field focusing on the use of oleogels for food formulation to improve their nutritional properties. The present review focuses on the most representative food-grade oleogels, highlighting current trends in terms of the most suitable methods of analysis and characterization, as well as trends in their application as substitutes for saturated and trans fats in foods. For this purpose, the physicochemical properties, structure, and composition of some oleogelators are primarily discussed, along with the adequacy of oleogel incorporation for use in edible products. Analysis and characterization of oleogels by different methods are important in the formulation of innovative foods, and therefore, this review discusses the most recent published results regarding their microstructure, rheological and textural properties, and oxidative stability. Last but not least, issues related to the sensory properties of oleogel-based foods are discussed, highlighting also the consumer acceptability of some of them.

Emulsion-Templated Liquid Oil Structuring with Egg White Protein Microgel- Xanthan Gum

In this study, oleogels were prepared by the emulsion-template method using egg-white protein microgel as a gelator and xanthan gum (XG) as thickener. The physicochemical properties of the emulsion and oleogels were investigated. The adsorption of protein on the surface of the oil droplet reached saturation when the protein microgel concentration reached 2%. The excess protein combined with XG and accumulated on the outer layer of the oleogel, which prevented the emulsion from flocculation, enhanced the oil-holding capacity of the oleogel, and had a positive effect on preventing the oxidation of oil. When the concentration of XG was less than 0.4%, the EWP microgel, combined with the XG, stabilized the emulsion. As the concentration of XG was greater than 0.4%, excessive XG in the emulsion improved the viscosity and mechanical properties of the emulsion to prevent the aggregation of oil droplets. However, the change in XG concentration had no significant effect on the oxidation of the oil.

Edible HIPE-Gels and oleogels formed by synergistically combining natural triterpenoid saponin and citrus dietary fiber

High-internal-phase emulsion gels (HIPE-Gels) and oleogels were successfully fabricated through synergistically combination of natural triterpenoid Quillaja saponin (QS) and citrus dietary fiber (CDF). The amphiphilic QS significantly lowered the oil-water interface tension; whereas CDF could form compact structure at the interface as well as in the bulk under a hydrogen-bonding interaction with saponin. The combination endowed the emulsion gels with enhanced performance, such as decreasing droplet size, strengthening gel network structure and better viscoelastic. At a very low QS of 0.045 %, stable HIPE-Gels can be produced with 0.3 % CDF, which mainly attributing to the highly viscoelastic fiber networks in continuous phase and thus actively trap the QS-coated emulsion droplets. Consequently, the robust HIPE-Gels were applied as soft template to fabricate oleogels with controlled by QS and CDF loading. These findings proved an effective strategy towards structuring edible liquid oil into healthy gels for alternating saturated and trans fats in foods.

Application of HPP for the Development of a Dessert Elaborated with Casein and Cocoa for a Dysphagia Diet

In this study, the application of high-pressure processing (HPP) for optimizing the texture of a cocoa dessert rich in casein and developed for people with dysphagia was investigated. Different treatments (250 MPa/15 min; 600 MPa/5 min) and protein concentrations (10-15%) were combined and evaluated for choosing the optimum combination leading to an adequate texture. The selected formulation was a dessert containing 4% cocoa and 10% casein and subjected to 600 MPa for 5 min. It showed a high nutritional value (11.5% protein) and high antioxidant capacity, which was slightly affected by the HPP processing. The rheological and textural properties showed that HPP had a clear effect on the dessert structure. The loss tangent decreased from 2.692 to 0.165, indicating the transition from a liquid to a gel-like structure, which is in a suitable range for dysphagia foods. During storage (14 and 28 days at 4 °C), progressive significant changes in the structure of the dessert were observed. A decrease in all rheological and textural parameters occurred, except for the loss of tangent, which increased its value. In any case, at 28 days of storage, samples maintained the weak gel-like structure (0.686 loss tangent) that is acceptable for dysphagia management.

Emulsion Gels Formed by Electrostatic Interaction of Gelatine and Modified Corn Starch via pH Adjustments: Potential Fat Replacers in Meat Products

The application of emulsion gels as animal fat replacers in meat products has been focused on due to their unique physicochemical properties. The electrostatic interaction between proteins and polysaccharides could influence emulsion gel stability. This study aimed to evaluate the physicochemical properties of emulsion gels using starch and gelatin as stabilizers, promoting electrostatic attraction via pH adjustment. Three systems were studied: emulsion gel A (EGA) and emulsion gel B (EGB), which have positive and negative net charges that promote electrostatic interaction, and emulsion gel C (EGC), whose charge equals the isoelectric point and does not promote electrostatic interactions. There was no significant difference in proximate analysis, syneresis and thermal stability between samples, while EGA and EGB had higher pH values than EGC. The lightness (L*) value was higher in EGA and EGB, while the yellowness (b*) value was the highest in EGC. The smaller particle size (p < 0.05) in EGA and EGB also resulted in higher gel strength, hardness and oxidative stability. Microscopic images showed that EGA and EGB had a more uniform matrix structure. X-ray diffraction demonstrated that all the emulsion gels crystallized in a β′ polymorph form. Differential scanning calorimetry (DSC) revealed a single characteristic peak was detected in both the melting and cooling curves for all the emulsion gels, which indicated that the fat exists in a single polymorphic state. All emulsion gels presented a high amount of unsaturated fatty acids and reduced saturated fat by up to 11%. Therefore, the emulsion gels (EGA and EGB) that favored the electrostatic protein-polysaccharide interactions are suitable to be used as fat replacers in meat products.