Enhanced hydrogen evolution on Mg (OH)2 covered Mg surfaces

Pulse Electrolysis Turns on CO2 Methanation through N-Confused Cupric Porphyrin

Breaking the D4h symmetry in the square-planar M-N4 configuration of macrocycle molecular catalysts has witnessed enhanced electrocatalytic activity, but at the expense of electrochemical stability. Herein, we hypothesize that the lability of the active Cu-N3 motifs in the N-confused copper (II) tetraphenylporphyrin (CuNCP) could be overcome by applying pulsed potential electrolysis (PPE) during electrocatalytic carbon dioxide reduction. We find that applying PPE can indeed enhance the CH4 selectivity on CuNCP by 3 folds to reach the partial current density of 170 mA cm-2 at >60 % Faradaic efficiency (FE) in flow cell. However, combined ex situ X-ray diffraction (XRD), transmission electron microscope (TEM), and in situ X-ray absorption spectroscopy (XAS), infrared (IR), Raman, scanning electrochemical microscopy (SECM) characterizations reveal that, in a prolonged time scale, the decomplexation of CuNCP is unavoidable, and the promoted water dissociation under high anodic bias with lowered pH and enriched protons facilitates successive hydrogenation of *CO on the irreversibly reduced Cu nanoparticles, leading to the improved CH4 selectivity. As a key note, this study signifies the adaption of electrolytic protocol to the catalyst structure for tailoring local chemical environment towards efficient CO2 reduction.

Role of electron localisation in H adsorption and hydride formation in the Mg basal plane under aqueous corrosion: a first-principles study

Understanding hydrogen-metal interactions is important in various fields of surface science, including the aqueous corrosion of metals. The interaction between atomic H and a Mg surface is a key process for the formation of sub-surface Mg hydride, which may play an important role in Mg aqueous corrosion. In the present work, we performed first-principles Density Functional Theory (DFT) calculations to study the mechanisms for hydrogen adsorption and crystalline Mg hydride formation under aqueous conditions. The Electron Localisation Function (ELF) is found to be a promising indicator for predicting stable H adsorption in the Mg surface. It is found that H adsorption and hydride layer formation is dominated by high ELF adsorption sites. Our calculations suggest that the on-surface adsorption of atomic H, OH radicals and atomic O could enhance the electron localisation at specific sites in the sub-surface region, thus forming effective H traps locally. This is predicted to result in the formation of a thermodynamically stable sub-surface hydride layer, which is a potential precursor of the crucial hydride corrosion product of magnesium.

Degradable Pure Magnesium Used as a Barrier Film for Oral Bone Regeneration

The barrier membrane plays an extremely critical role in guided bone regeneration (GBR), which determines the success or failure of GBR technology. In order to obtain barrier membranes with high mechanical strength and degradability, some researchers have focused on degradable magnesium alloys. However, the degradation rate of pure Mg-based materials in body fluids is rather fast, thus posing an urgent problem to be solved in oral clinics. In this study, a novel micro-arc oxidation (MAO) surface-treated pure Mg membrane was prepared. Electrochemical tests, immersion experiments and in vivo experiments were carried out to investigate its potential use as a barrier membrane. The experimental results showed that the corrosion resistance of a pure Mg membrane treated by MAO is better than that of the uncoated pure Mg. The results of cell experiments showed no obvious cytotoxicity, which suggests the enhanced differentiation of osteoblasts. At the same time, the MAO-Mg membrane showed better biological activity than the pure Ti membrane in the early stage of implantation, exhibiting relatively good bone regeneration ability. Consequently, the MAO membrane has been proven to possess good application prospects for guided bone regeneration.

Microstructure and Corrosion Resistance of LaNi5-xMgx Alloys

This study analysed the corrosion parameters of LaNi_5-xMg_x hydrogen-absorbing alloys depending on the degree of replacement of nickel with magnesium and the exposure time of samples in a strongly alkaline solution. The microstructure and composition of the alloys were analysed using SEM and EDS, respectively. A correlation was observed between the corrosion rate and the magnesium content in the alloy and the exposure time of the investigated materials in the corrosive solution. The obtained research results showed that the LaNi₅ phase, rich in Mg, corroded easily, and the presence of Mg in LaNi_5-xMg_x alloys became beneficial only for longer exposure times of samples in an alkaline solution. The corrosion layer formed during the contact of the magnesium alloys with the electrolyte promoted faster H₂ evolution compared to the non-magnesium-substituted alloy.

In Situ Investigation of the Cytotoxic and Interfacial Characteristics of Titanium When Galvanically Coupled with Magnesium Using Scanning Electrochemical Microscopy

Recently, the cytotoxic properties of galvanically coupled Ti-Mg particles have been shown in different cells. This cytotoxic effect has been attributed mainly to Mg due to its tendency to undergo activation when coupled with Ti, forming a galvanic cell consisting of an anode (Mg) and a cathode (Ti). However, the role of the Ti cathode has been ignored in explaining the cytotoxic effect of Ti-Mg particles due to its high resistance to corrosion. In this work, the role of titanium (Ti) in the cytotoxic mechanism of galvanically coupled Ti-Mg particles was examined. A model galvanic cell (MGC) was prepared to simulate the Mg-Ti particles. The electrochemical reactivity of the Ti sample and the pH change in it due to galvanic coupling with Mg were investigated using scanning electrochemical microscopy (SECM). It was observed that the Ti surface changed from passive to electrochemically active when coupled with Mg. Furthermore, after only 15 min of galvanic coupling with Mg, the pH in the electrolyte volume adjacent to the Ti surface increased to an alkaline pH value. The effects of the galvanic coupling of Ti and Mg, as well as those of the alkaline pH environment, on the viability of Hs27 fibroblast cells were investigated. It was shown that the viability of Hs27 cells significantly diminished when Mg and Ti were galvanically coupled compared to when the two metals were electrically disconnected. Thus, although Ti usually exhibited high corrosion resistance when exposed to physiological environments, an electrochemically active surface was observed when galvanically coupled with Mg, and this surface may participate in electron transfer reactions with chemical species in the neighboring environment; this participation resulted in the increased pH values above its surface and enhanced generation of reactive oxygen species. These features contributed to the development of cytotoxic effects by galvanically coupled Ti-Mg particles.

Inhibiting Corrosion of Mg Alloy AZ31B-H24 Sheet Metal with Lithium Carbonate

The objective of this work was to determine the effectiveness of dissolved Li2CO3 as a corrosion inhibitor for AZ31B-H24 sheet metal when immersed in NaCl (aq) at ambient temperature. Corrosion rates were determined by gravimetric mass loss and volumetric H2 evolution measurements and the observed inhibition was investigated further using potentiodynamic polarization, scanning vibrating electrode technique, and x-ray photoelectron surface analytical measurements. It is shown that dissolved Li2CO3 significantly inhibits corrosion as it reduces the corrosion rate by a factor of 10. The manner in which inhibition is achieved is rationalized by the role played by the surface film produced during corrosion in inhibiting both the anode (anodic dissolution) and cathode (H2 evolution) kinetics. Inhibition involves the suppression of the filament-like corrosion mode, albeit on the macroscale, and associated cathodic activation. By process of elimination, it is proposed that the Li+ cations play a key role in inhibiting the anodic dissolution and associated cathodic activation that is required to drive the filament-like corrosion.

Local probe investigation of electrocatalytic activity

As the world energy crisis remains a long-term challenge, development and access to renewable energy sources are crucial for a sustainable modern society. Electrochemical energy conversion devices are a promising option for green energy supply, although the challenge associated with electrocatalysis have caused increasing complexity in the materials and systems, demanding further research and insights. In this field, scanning probe microscopy (SPM) represents a specific source of knowledge and understanding. Thus, our aim is to present recent findings on electrocatalysts for electrolysers and fuel cells, acquired mainly through scanning electrochemical microscopy (SECM) and other related scanning probe techniques. This review begins with an introduction to the principles of several SPM techniques and then proceeds to the research done on various energy-related reactions, by emphasizing the progress on non-noble electrocatalytic materials.

PEO of AZ31 Mg Alloy: Effect of Electrolyte Phosphate Content and Current Density

In this work, the quality of coatings prepared by plasma electrolytic oxidation (PEO) on an AZ31 magnesium alloy were evaluated. This was done by studying the effects of the chemical composition of phosphate-based process electrolytes in combination with different applied current densities on coating thickness, porosity, micro-cracking and corrosion resistance in 0.1 M NaCl. Both processing parameters were studied in four different levels. Mid-term corrosion resistance in 0.1 M NaCl was examined by electrochemical impedance spectroscopy and based on this, corrosion mechanisms were hypothesized. Results of performed experiments showed that the chosen processing parameters and electrolyte composition significantly influenced the morphology and corrosion performance of the prepared PEO coatings. The PEO coating prepared in an electrolyte with 12 g/L Na3PO4·12H2O and using an applied current density 0.05 A/cm2 reached the highest value of polarization resistance. This was more than 11 times higher when compared to the uncoated counterpart.

First-Principles Approach to Model Electrochemical Reactions: Understanding the Fundamental Mechanisms behind Mg Corrosion

Combining concepts of semiconductor physics and corrosion science, we develop a novel approach that allows us to perform ab initio calculations under controlled potentiostat conditions for electrochemical systems. The proposed approach can be straightforwardly applied in standard density functional theory codes. To demonstrate the performance and the opportunities opened by this approach, we study the chemical reactions that take place during initial corrosion at the water-Mg interface under anodic polarization. Based on this insight, we derive an atomistic model that explains the origin of the anodic hydrogen evolution.

Praseodymium-decorated graphene oxide as a corrosion inhibitor in acidic media for the magnesium AZ31 alloy

In the present work, Pr-decorated graphene oxide was synthesized and tested as a corrosion barrier layer in acidic media for the magnesium AZ31 alloy. The morphology, composition and structure of Pr-decorated graphene oxide sheets were characterized via HRTEM, FESEM, Raman, XRD, DLS, UV and FTIR studies. The corrosion inhibition efficiency on the alloy surface was monitored via microstructural and electrochemical methods. The results indicate that Pr-decorated graphene oxide provides improved protection for the Mg AZ31 alloy compared to conventional epoxy coatings. The proposed mechanism arises from a combination of the barrier activities of the composite, GO + Pr, and the epoxy coating on the Mg alloy in acidic media.

The Mg alloys 111 surface is covered by the praseodymium decorated graphene oxide sheet, and (A) & (B) indicates ions diffusion control (C) indicates epoxy coating failure.

Controlling the corrosion and cathodic activation of magnesium via microalloying additions of Ge

The evolution of corrosion morphology and kinetics for magnesium (Mg) have been demonstrated to be influenced by cathodic activation, which implies that the rate of the cathodic partial reaction is enhanced as a result of anodic dissolution. This phenomenon was recently demonstrated to be moderated by the use of arsenic (As) alloying as a poison for the cathodic reaction, leading to significantly improved corrosion resistance. The pursuit of alternatives to toxic As is important as a means to imparting a technologically safe and effective corrosion control method for Mg (and its alloys). In this work, Mg was microalloyed with germanium (Ge), with the aim of improving corrosion resistance by retarding cathodic activation. Based on a combined analysis herein, we report that Ge is potent in supressing the cathodic hydrogen evolution reaction (reduction of water) upon Mg, improving corrosion resistance. With the addition of Ge, cathodic activation of Mg subject to cyclic polarisation was also hindered, with beneficial implications for future Mg electrodes.

Examining the elemental contribution towards the biodegradation of Mg–Zn–Ca ternary metallic glasses

Here we analysed Mg–Zn–Ca metallic glasses that are promising biomaterials for orthopaedic applications with a specific emphasis on the individual element's role in biodegradation.

The effect of iron re-deposition on the corrosion of impurity-containing magnesium

Magnesium corrosion and the negative difference effect have been explained by linking an iron re-deposition mechanism and electrochemical desorption reactions (Heyrovsky-type) to recent experimental results.

Introductory lecture on corrosion chemistry: a focus on anodic hydrogen evolution on Al and Mg

The increase in the rate of hydrogen evolution (HE) on dissolving Mg surfaces with increasing anodic current density or potential, which is sometimes called the negative difference effect, has been the topic of much discussion in recent years. A review of the very recent contributions to this subject is given in this paper. Increased catalytic activity of the corrosion product layer, either from the accumulated impurities or from the Mg oxy-hydroxide itself, is shown to have a minor influence on the anodic HE observed on dissolving Mg at high anodic current densities and potentials. Al exhibits similar characteristics during anodic polarization in concentrated HCl, although the anodic HE rate on Al is less than on Mg. Possible mechanisms for the anodic hydrogen are provided and implications in the area of intergranular corrosion and environmental cracking are discussed.