Framework-derived Fe2O3/Mn3O4 nanocubes as electrochemical catalyst for simultaneous analysis of Cu(II) and Hg(II)

Recent advance of nanomaterials modified electrochemical sensors in the detection of heavy metal ions in food and water

As one of the main pollutants, heavy metal ions can accumulate in the human body and cause a cascade of damage. Electrochemical sensors provide great prospects for tracing heavy metal ions because of their properties of high sensitivity, low detection limits and fast response. Electrode surface modification materials play a key role in enhancing the performance of electrochemical sensors. Herein, we summarize in detail the recent work on electrochemical sensors modified by carbon nanomaterials (graphene and its derivatives, carbon nanofibers and carbon nanotubes), metal nanomaterials (gold, silver, bismuth and iron), complexes (MOFs, ZIFs and MXenes) and their composites for the detection of heavy metal ions (mainly include Cd(II), Hg(II), Pb(II), As(III), Cu(II) and Zn(II)) in food and water. The synthetic strategies, mechanisms, innovations, advantages, challenges and prospects of various electrode modification nanomaterials for the detection of heavy metal ions in food and water are discussed.

High-performance electrosorption of lanthanum ion by Mn3O4-loaded phosphorus-doped porous carbon electrodes via capacitive deionization

Transition-metal-oxide@heteroatom doped porous carbon composites have attracted considerable research interest because of their large theoretical adsorption capacity, excellent electrical conductivity and well-developed pore structure. Herein, Mn3O4-loaded phosphorus-doped porous carbon composites (Mn3O4@PC-900) were designed and fabricated for the electrosorption of La3+ in aqueous solutions. Due to the synergistic effect between Mn3O4 and PC-900, and the active sites provided by Mn-O-Mn, C/PO, C-P-O and Mn-OH, Mn3O4@PC-900 exhibits high electrosorption performance. The electrosorption value of Mn3O4@PC-900 was 45.34% higher than that of PC-900, reaching 93.02 mg g-1. Moreover, the adsorption selectivity reached 87.93% and 89.27% in La3+/Ca2+ and La3+/Na+ coexistence system, respectively. After 15 adsorption-desorption cycles, its adsorption capacity and retention rate were 50.34 mg g-1 and 54.12%, respectively. The electrosorption process is that La3+ first accesses the pores of Mn3O4@PC-900 to generate an electric double layer (EDL), and then undergoes further Faradaic reaction with Mn3O4 and phosphorus-containing functional groups through intercalation, surface adsorption and complexation. This work is hoped to offer a new idea for exploring transition-metal-oxide @ heteroatom doped porous carbon composites for separation and recovery of rare earth elements (REEs) by capacitive deionization.

A novel "turn-on" fluorescent probe based on thiocarbamoyl-DHP for Hg2+ detection in water samples and living cells

In this study, two fluorescent sensing probes, dihydropyridine (DHP) derivatives (DHP-CT1 and DHP-CT2) bearing phenoxy thiocarbonyl group, have been developed for Hg2+ detection. The tandem trimerization-cyclization of methylpropiolate with ammonium acetate gave 1.4-DHP and 1,2-DHP derivatives, which were reacted with O-phenylcarbonochloridothioate to produce DHP-CT1 and DHP-CT2, respectively. DHP-CT1 exhibits superior sensitivity and selectivity of fluorescence enhancement towards Hg2+ in aqueous media. The fluorescence intensity shows a good linear relationship with the concentration of Hg2+ in the range of 0-10 µM providing the extremely low LOD of 346 nM (69.4 ppb). The fluorescence enhancement is caused by the Hg2+ promoted hydrolysis of the thioamide bond releasing the fluorescent 1,4-DHP that was confirmed by NMR and HRMS. The quantitative analysis of Hg2+ in water samples using DHP-CT1 probe was demonstrated in aqueous solution and paper-based sensing strips. Furthermore, DHP-CT1 was also applied for monitoring intracellular Hg2+ in living RAW264.7 macrophages through fluorescence cell imaging.

Hierarchical porous loofah-like carbon with sulfhydryl functionality for electrochemical detection of trace mercury in water

Mercury is a common contaminant found in natural waters, which is highly toxic to human health. Thus, the facile and reliable monitoring of mercury in waters is of great significance. In this study, we fabricated a novel loofah-like hierarchical porous carbon with sulfhydryl functionality (S-LHC), and applied it as an ultrasensitive sensor for the electrochemical detection of mercury in water. The S-LHC was prepared through the direct pyrolysis of a triazole-rich metal-organic framework (MOF), followed by chemical modification using thioglycolic acid. The highly conductive N-doped carbon framework of S-LHC facilitated the electron transfer in mercury electrochemical sensing. Meanwhile, the open hierarchical pore structure and abundant sulfhydryl groups allowed the fast diffusion and effective enrichment of mercury ions. Consequently, the S-LHC sensor exhibited an exceptionally high sensitivity for mercury ions, with the mercury detection limit (0.36 nM) orders of magnitude lower than the regulated values in drinking water (typically 10∼30 nM). The constructed sensor also afforded good anti-interference ability and excellent stability for long-term detection of mercury in a variety of complex real water samples. The present study provides not only a facile method for mercury detection, but also a new idea for the construction of highly sensitive electrochemical sensors.

A highly parallel DTT/MB-DNA/Au electrochemical biosensor for trace Hg monitoring by using configuration occupation approach and SECM

Environmental pollution and medicine safety have aroused increasing public concerns due to human health. Amongst various contaminants, mercury is of special attention owing to their environmental persistence and biogeochemical recycling and ecological risks. Herein, a simple and highly parallel electrochemical biosensor for Hg determination was designed and investigated. The proposed biosensor was prepared and compared between (1) DTT/MB-DNA/Au with configuration occupation approach and (2) MCH/MB-DNA/Au with passivation approach. According to the combined results of scanning electrochemical microscope (SECM) and Randles-Sevcik equation, the DTT modified electrode exhibited high uniformity on DNA distribution and superb stability on electron transfer in Hg2+ detection. Evidentially, the response value of proposed DTT/MB-DNA/Au was increased from 57.518% to 97.607%, while RSD% between duplicate runs had dropped from 22.658% to 0.223% (n = 3). Moreover, the increased proportion of effective working area was 467.380% compared with general sensors. Besides, DTT concentration, DNA concentration as well as assembly time were optimized, utilizing electrochemical impedance spectroscopy (EIS), Cyclic Voltammetry (CV) and Square Wave Anode Stripping Voltammetry (SWASV). This optimized biosensor exhibited an excellent selectivity toward Hg2+ over Cu2+, As2+, Cd2+, Pb2+, Cr3+, Ni2+ and Zn2+ etc., and the stability of DTT/MB-DNA/Au were at least two times better even after 3 days under room temperature. Also, a linear relation was observed between the peak current and Hg2+concentrations in a range from 0.25 nM to 2.00 μM with a detection limit of 53.00 pM under optimal conditions. Finally, DTT/MB-DNA/Au was applied for plants and medical products analysis. In all, this optimized DTT/MB-DNA/Au with advantages of high repeatability and sensitivity would provide a new insight into the design and application of biosensor for reliable sensing in safeguarding plant protection and medicinal safety.