Extraction techniques in food industry: Insights into process parameters and their optimization

Synergistic effect of arsenic removal from petroleum condensate via liquid-liquid extraction: Thermodynamics, kinetics, DFT and McCabe-Thiele method

This work presents the purification of petroleum condensate by removing arsenic ions via liquid-liquid extraction (LLE). Influence of pure and synergistic extractants is investigated. In terms of the practicability, following parameters are examined: the type of extractant, operating time, and temperature. Response surface methodology is used to design parameters such as organic-aqueous ratio and extractant concentration. Under optimal conditions; a mixture of 1 mol/L HCl and 0.02 mol/L thiourea with an organic/aqueous ratio of 1:4 at 323.15 K for 60 min, the extraction of arsenic reached 78.2 %. Further, batch simulation via two-stage counter-current extraction, and estimation by McCabe-Thiele diagram proved to be enhanced arsenic extraction to 95.3 %. Analysis by FTIR show that arsenic ions in petroleum condensate are formed as triphenylarsine compound ((C6H5)3As). The process of arsenic removal proved to be zero-order endothermic, irreversible and spontaneous reaction. The results obtained from the density functional theory (DFT) confirm that arsenic ions react with the synergistic extractant: effectively forming a covalent bond (As-S).

Application of Ultrafiltration for Recovery of Polyphenols from Rose Petal Byproduct

One main objective of this study was to increase the utilization of raw material in the rose (Rosa damascena Mill.) essential oil industry by the application of membrane technologies. In this research, distilled (dearomatized) rose petals, the primary byproduct in essential oil production, were subjected to an enzyme-assisted extraction and subsequent membrane separation for partial concentration at different levels using UF1-PAN and UF10-PAN membranes. The results show that the permeate flux decreased with a rise in volume reduction ratio and increased with a rise in transmembrane pressure and feed flow rate. At the beginning of the process, the highest flux was with the UF1-PAN membrane, but at the end of the process, it was with the UF10-PAN membrane. Total polyphenols of the retentates increased by 27-39% and 26-67% during ultrafiltration with the UF1-PAN and UF10-PAN membranes, respectively, with the highest value obtained for the UF10-PAN membrane at VRR 6. The highest concentration factor and rejection of total solids, total polyphenols, redox-active antioxidants, and radical scavenging antioxidants were obtained at VRR 6 with the UF10-PAN membrane. The use of green technology based on enzyme-assisted extraction and ultrafiltration for recovery and concentration of polyphenols from rose petal byproduct solves practical environmental problems for the treatment and utilization of byproducts from the rose oil industry. The retentate obtained could be used in the food production, cosmetic, and pharmaceutical industries.

A Green Bridge: Enhancing a Multi-Pesticide Test for Food by Phase-Transfer Sample Treatment Coupled with LC/MS

The preparation and treatment of the sample has become an important part of the determination process, which directly affects the accuracy of detection. The preparation of the sample for final detection is actually a process of separation and transfer of the target to be tested from the sample matrix. The phase-transfer process of analysis and detection is the process of transferring the target substance to be measured from a complex multiphase system to a simple homogeneous system. This study shows a new phase-transfer process for food sample pretreatment in the determination of carbamate pesticides. Edible gum, xanthan gum, carrageenan, and gelatin were selected for purification testing from the perspective of eco-friendliness and safety. Phase-transfer purification process research was carried out on spinach and other foods. Compared with the commonly used QuEChERS method, the LC/MS results indicate that the straightforward carrageenan treatment process can significantly diminish the detection matrix effect and yield similarly superior detection parameters. The phase-transfer purification method with carrageenan has similar sensitivity and systematic error. The limits of detection and limits of quantitation of each pesticide compound in six plant sample substrates were 0.02-0.36 μg/kg and 0.06-1.9 μg/kg, respectively, which were lower than the residue limits here and abroad. Supplemental recoveries in six blank samples at 5, 20, and 100 μg/kg with the phase-transfer process method were better than those for the QuEChERS method. Positive determination results of actual samples using carrageenan phase-transfer purification proved that this method can be used for related detection from a practical point of view.

Using plant-based compounds as preservatives for meat products: A review

The susceptibility of meat and meat products (MP) to oxidation and microbial deterioration poses a risk to the nutritional quality, safety, and shelf life of the product. This analysis provides a brief overview of how bioactive compounds (BC) impact meat and MP preservation, and how they can be utilized for preservation purposes. The use of BC, particularly plant-based antioxidants, can reduce the rate of auto-oxidation and microbial growth, thereby extending the shelf life of MP. These BC include polyphenols, flavonoids, tannins, terpenes, alkaloids, saponins, and coumarins, which have antioxidant and antimicrobial properties. Bioactive compounds can act as preservatives and improve the sensory and physicochemical properties of MP when added under appropriate conditions and concentrations. However, the inappropriate extraction, concentration, or addition of BC can also lead to undesired effects. Nonetheless, BC have not been associated with chronic-degenerative diseases and are considered safe for human consumption. MP auto-oxidation leads to the generation of reactive oxygen species, biogenic amines, malonaldehyde (MDA), and metmyoglobin oxidation products, which are detrimental to human health. The addition of BC at a concentration ranging from 0.025 to 2.5% (w/w in powdered or v/w in oil or liquid extracts) can act as a preservative, improving color, texture, and shelf life. The combination of BC with other techniques, such as encapsulation and the use of intelligent films, can further extend the shelf life of MP. In the future, it will be necessary to examine the phytochemical profile of plants that have been used in traditional medicine and cooking for generations to determine their feasibility in MP preservation.

Marine Polyphenol Phlorotannins as a Natural Sleep Aid for Treatment of Insomnia: A Review of Sedative-Hypnotic Effects and Mechanism of Action

Insomnia is a common sleep disorder. Natural sleep aids are gaining worldwide popularity as alternatives to prescription drugs for improving sleep. Recently, numerous studies have investigated the sedative-hypnotic effects of the polyphenols of terrestrial plants. The hypnotic effects of marine polyphenols have also been studied in recent years. Phlorotannins are marine polyphenols that are found only in brown algae. Phlorotannins exert sedative-hypnotic effects via the gamma-aminobutyric acid type A-benzodiazepine receptor. In addition, the brown seaweed Ecklonia cava supplement containing phlorotannins has been approved by the Ministry of Food and Drug Safety as a health-functional ingredient that helps improve sleep quality. Currently, it is meaningful to deal with the sedative-hypnotic effects of phlorotannins as natural sleep aids. The current review comprehensively presents the sedative-hypnotic effects in animal models and human clinical trials as well as their mechanism of action, extraction, purification, and safety.