Characterization of laminar extrudates manufactured at room temperature in the absence of solvents for the delivery of drugs

Evaluation of the Potential Use of Laminar Extrudates on Stabilizing Micronized Coumarin Particles by Supercritical Fluids (RESS)-Study of Different RESS Processing Variables and Mode of Operation

The study evaluates the ability of extrudates to deliver coumarin particles micronized by the rapid expansion of supercritical solutions (RESS). The RESS parameters were drug load (2-50 g), pressure (15-42 MPa) and temperature (40-60°C) in the extraction and pressure in the expansion (0.1-5 MPa) chambers in batch or continuous and CO₂ flow rate in the continuous mode of operation. Particles were characterized for size (laser diffractometry, optical and electronic microscopies-19-61 μm), surface area (BET-0.282-0.423 m²/g), density (pycnometry-1.273-1.358 g/cm³) and yield (2-70%). Extrudates were characterized for the force of extrusion (4 kN), release of coumarin (100%/24 h) and mechanical properties (bending strength and stiffness increased, whereas elasticity decreased in storage) and X-ray diffractometry (micronized particles and extrudates have shown identical patterns) and calorimetry (DSC, enthalpies increased on storage). In the discontinuous mode of operation, increased loads in the extraction or increased pressure in the expansion chambers led to larger particles, whereas increased temperature and pressure in the extraction chamber led to smaller particles. In the continuous mode of operation, a decrease on the expansion pressure, load and CO₂ flow rate led to increased yields. An increase on the flow rate led to a decrease on the particles' diameter, but an increase on coumarin load in the extraction chamber led to an increase in diameter. The study has identified the key parameters in RESS continuous and discontinuous modes of operation affecting the properties of the micronized coumarin particles and has proved the ability of extrudates with a laminar shape on delivering micronized particles.

3D printed orodispersible films with Aripiprazole

Three dimensional printing technology is gaining in importance because of its increasing availability and wide applications. One of the three dimensional printing techniques is Fused Deposition Modelling (FDM) which works on the basis of hot melt extrusion-well known in the pharmaceutical technology. Combination of fused deposition modelling with preparation of the orodispersible film with poorly water soluble substance such as aripiprazole seems to be extra advantageous in terms of dissolution rate. 3D printed as well as casted films were compared in terms of physicochemical and mechanical properties. Moreover, drug-free films were prepared to evaluate the impact of the extrusion process and aripiprazole presence on the film properties. X-ray diffractometry and thermal analyses confirmed transition of aripiprazole into amorphous state during film preparation using 3D printing technique. Amorphization of the aripiprazole and porous structure of printed film led to increased dissolution rate in comparison to casted films, which, however have slightly better mechanical properties due to their continuous structure. It can be concluded that fused deposition modelling is suitable technique and polyvinyl alcohol is applicable polymer for orodispersible films preparation.

Solvent-free melting techniques for the preparation of lipid-based solid oral formulations

Lipid excipients are applied for numerous purposes such as taste masking, controlled release, improvement of swallowability and moisture protection. Several melting techniques have evolved in the last decades. Common examples are melt coating, melt granulation and melt extrusion. The required equipment ranges from ordinary glass beakers for lab scale up to large machines such as fluid bed coaters, spray dryers or extruders. This allows for upscaling to pilot or production scale. Solvent free melt processing provides a cost-effective, time-saving and eco-friendly method for the food and pharmaceutical industries. This review intends to give a critical overview of the published literature on experiences, formulations and challenges and to show possibilities for future developments in this promising field. Moreover, it should serve as a guide for selecting the best excipients and manufacturing techniques for the development of a product with specific properties using solvent free melt processing.

Delivery of drugs from laminar co-extrudates manufactured by a solvent-free process at room temperature

This work aims to design and manufacture laminar co-extrudates as a new dosage form for the delivery of drugs. Co-extrudates made of lipid-based materials with a laminar shape were manufactured at room temperature in the absence of solvents and assessed over time for their mechanical properties (bending strength, deformation, stiffness, and elasticity), density, porosity, thermal behavior and main mechanism of drug release. The study has shown that the extrusion force at steady state increased with the extrusion rate and with the number of layers. The bending strength and stiffness of extrudates increased over time. Laminar co-extrudates with higher number of layers presented a decreasing dissolution efficiency of 38.3 ± 0.6%, 23.0 ± 0.2%, and 12.3 ± 0.2%, for mono-, bi-, and trilayer, respectively. After 90 days, the density, the deformation, and elasticity decreased: trilayer extrudates were the denser and the ones to present the lowest ability to deform and the highest elasticity, whereas monolayer extrudates were the less dense presenting the highest ability to deform. Changes were more evident in the first days after manufacture leading to stabilization over time. Laminar (co-)extrudates have been confirmed as an innovative dosage form for tailored delivery of drugs made without solvents at room temperature.