The influence of aggregation of latex particles on membrane fouling attachments & ultrafiltration performance in ultrafiltration of latex contaminated water and wastewater

Imperative assessment on the current status of rubber wastewater treatment: Research development and future perspectives

The environment has been significantly impacted by the rubber industry through the release of large quantities of wastewater during various industrial processes. Therefore, it is crucial to treat the wastewater from the rubber industry before discharging it into natural water bodies. With the understanding that alarmingly depleting freshwater sources need to be preserved for future generations, this paper reviews the status of the rubber industry and the pollution caused by them, focusing mainly on water pollution. The review pays special attention to the recent advancements in wastewater treatment techniques for rubber industry wastewater categorizing them into pre-treatment, secondary, and tertiary treatment processes while discussing the advantages and disadvantages. Through a comprehensive analysis of existing literature, it was determined that organic content and NH4+ are the most frequently focused water quality parameters, and despite some treatment methods demonstrating superior performance, many of the methods still face limitations and require further research to improve systems to handle high organic loading on the treatment systems and to implement them in industrial scale. The paper also explores the potential of utilizing untreated or treated wastewater and byproducts of wastewater treatment in contributing towards achieving several United Nations sustainable development goals (UN-SDGs); SDG 6, SDG 7, SDG 9, and SDG 12.

Evaluating the Occurrence of Polystyrene Nanoparticles in Environmental Waters by Agglomeration with Alkylated Ferroferric Oxide Followed by Micropore Membrane Filtration Collection and Py-GC/MS Analysis

Although nanoplastics (NPs) are recognized as emerging anthropogenic particulate pollutants, the occurrence of NPs in the environment is rarely reported, partly due to the lack of sensitive methods for the concentration and detection of NPs. Herein, we present an efficient method for enriching NPs of different compositions and various sizes. Alkylated ferroferric oxide (Fe₃O₄) particles were prepared as adsorbents for highly efficient capture of NPs in environmental waters, and the formed large Fe₃O₄-NP agglomerates were separated by membrane filtration. Detection limits of 0.02-0.03 μg/L were obtained for polystyrene (PS) and poly(methyl methacrylate) (PMMA) NPs by detection with pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). When analyzing real water samples from different sources, it is remarkable that PS NPs were detected in 11 out of 15 samples with concentrations ranging from <0.07 to 0.73 μg/L, while PMMA were not detected. The wide detection of PS NPs in our study confirms the previous speculation that NPs may be ubiquitous in the environmental waters. The accurate quantification of PS NPs in environmental waters make it possible to monitor the pollution status of NPs in aquatic systems and evaluate their potential risks.

New Analytical Approaches for Effective Quantification and Identification of Nanoplastics in Environmental Samples

Nanoplastics (NPs) are a rapidly developing subject that is relevant in environmental and food research, as well as in human toxicity, among other fields. NPs have recently been recognized as one of the least studied types of marine litter, but potentially one of the most hazardous. Several studies are now being reported on NPs in the environment including surface water and coast, snow, soil and in personal care products. However, the extent of contamination remains largely unknown due to fundamental challenges associated with isolation and analysis, and therefore, a methodological gap exists. This article summarizes the progress in environmental NPs analysis and makes a critical assessment of whether methods from nanoparticles analysis could be adopted to bridge the methodological gap. This review discussed the sample preparation and preconcentration protocol for NPs analysis and also examines the most appropriate approaches available at the moment, ranging from physical to chemical. This study also discusses the difficulties associated with improving existing methods and developing new ones. Although microscopical techniques are one of the most often used ways for imaging and thus quantification, they have the drawback of producing partial findings as they can be easily mixed up as biomolecules. At the moment, the combination of chemical analysis (i.e., spectroscopy) and newly developed alternative methods overcomes this limitation. In general, multiple analytical methods used in combination are likely to be needed to correctly detect and fully quantify NPs in environmental samples.

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.

Efficient removal of p-nitrophenol from water using montmorillonite clay: insights into the adsorption mechanism, process optimization, and regeneration

The present research highlights the use of a montmorillonite clay to remove p-nitrophenol (PNP) from aqueous solution. The montmorillonite clay was characterized using powder X-ray diffraction, Fourier-transformed infrared spectroscopy, scanning electron microscopy, X-ray fluorescence, Brunauer-Emmett-Teller analyses, and zero point charge in order to establish the adsorption behavior-properties relationship. The physiochemical parameters like pH, initial PNP concentration, and adsorbent dose as well as their binary interaction effects on the PNP adsorption yield were statistically optimized using response surface methodology. As a result, 99.5% removal of PNP was obtained under the optimal conditions of pH 2, adsorbent dose of 2 g/l, and PNP concentration of 20 mg/l. The interaction between adsorbent dose and initial concentration was the most influencing interaction on the PNP removal efficiency. The mass transfer of PNP at the solution/adsorbent interface was described using pseudo-first-order and intraparticle diffusion. Langmuir isotherm well fitted the experimental equilibrium data with a satisfactory maximum adsorption capacity of 122.09 mg/g. The PNP adsorption process was thermodynamically spontaneous and endothermic. The regeneration study showed that the montmorillonite clay exhibited an excellent recycling capability. Overall, the montmorillonite clay is very attractive as an efficient, low-cost, eco-friendly, and recyclable adsorbent for the remediation of hazardous phenolic compounds in industrial effluents.

Application of a hybrid gravity-driven membrane filtration and dissolved ozone flotation (MDOF) process for wastewater reclamation and membrane fouling mitigation

This study proposed a novel membrane filtration and dissolved ozone flotation integrated (MDOF) process and tested it at pilot scale. Membrane filtration in the MDOF process was operated in gravity-driven mode, and required no backwashing, flushing, or chemical cleaning. Because ozone was added in the MDOF process, ozonation, coagulation, and membrane filtration could occur in a single reactor. Moreover, in situ ozonation occurred in the MDOF process, which differs from the conventional pre-ozonation membrane filtration process. Significant enhancement of turbidity removal was further achieved through the addition of membrane filtration. Membrane fouling was mitigated in the MDOF process compared to the MDAF process. In situ ozonation in the MDOF process decreased the fluorescence intensity and transformed the high MW dissolved organics into small MW compounds. For the fouling layer, the extracellular polymeric substance (EPS) contents and cake layer morphology were analyzed. The results indicated that the contents of EPS decreased. Furthermore, a thinner and more loosely structured cake layer formed in the MDOF process. Because coagulation and ozonation occurred simultaneously in a single reactor, the generation of hydroxyl radicals was enhanced through the catalytic effect of Al-based coagulants on ozone decomposition, which further alleviated membrane fouling in the MDOF process.

The effects of hydrogen peroxide pre-oxidation on ultrafiltration membrane biofouling alleviation in drinking water treatment

Pre-oxidation is widely used to reduce ultrafiltration membrane fouling. However, the variation in the composition of microbial communities and extracellular polymeric substances (EPSs) accompanying pre-oxidation in drinking water treatment has received little attention. In this study, hydrogen peroxide (H₂O₂) was used in a coagulation-ultrafiltration process with Al₂(SO₄)₃·18H₂O. A long-term reactor experiment (60d) showed that pre-oxidation alleviated membrane fouling, mainly due to its inhibition of microbial growth, as observed by flow cytometry measurements of the membrane tank water. Further analysis of the formed cake layer demonstrated that the corresponding levels of EPS released from the microbes were lower with than without H₂O₂ treatment. In comparison to polysaccharides, proteins dominated the EPS. 2D-electrophoresis showed little difference (p>0.05, Student's t-test) in the composition of proteins in the cake layer between the treatments with and without H₂O₂. The molecular weights of proteins ranged from approximately 30-50kDa and the majority of isoelectric points ranged from 6 to 8. High-throughput sequencing showed that the predominant bacteria were Proteobacteria, Bacteroidetes, and Verrucomicrobia in both cake layers. However, the relative abundance of Planctomycetes was higher in the cake layer with H₂O₂ pre-oxidation, which was likely probably due to the strong oxidative resistance of its cell wall. Overall, our findings clarify the fundamental molecular mechanism in H₂O₂ pre-oxidation for ultrafiltration membrane bio-fouling alleviation in drinking water treatment.