Questioning ZnO, Ag, and Ag/ZnO nanoparticles as antimicrobial agents for textiles: Do they guarantee total protection against bacteria and SARS-CoV-2?

Enhanced antimicrobial efficacy of biogenic ZnO nanoparticles through UV-B activation: A novel approach for textile garment

Zinc oxide nanoparticles (ZnO NP) are characterized by novel properties which have been attracting the attention of different lines of research due to their wide applicability. Obtaining this nanomaterial is strongly linked to biogenic synthesis methods, which have also been developed in this research, using Coriandrum sativum extract as a reducing agent. ZnO NPs have been properly characterized by techniques to evaluate their morphology by transmission electron microscopy (TEM) and elemental analysis by EDX. The evaluation of the antimicrobial and antifungal effects is linked to the use of a system provided by "locker sanitizer" equipment, which has been designed and built as part of this research, and is intended to treat textile garments by nebulizing the ZnO NP colloid (99.08 μg/mL) + UV-B, water + UV-B, and UV-B only, and also to evaluate the influence of the treatment time for 1, 2 and 3 min. In this sense, it is known that the nanomaterial used shows a better response to UV light because more hydroxyl radicals are produced, leading to a higher reaction rate, which results in greater efficiency in inhibitory processes. The results show that the use of the locker sanitizer is more efficient when using ZnO NP + UV-B light since it achieved 100 % growth inhibition against E. coli, C. albicans, and A. brasiliensis, and >99 % against S. aureus, after 3 min of treatment.

Zinc Oxide and Magnesium-Doped Zinc Oxide Nanoparticles Ameliorate Murine Chronic Toxoplasmosis

Toxoplasma gondii causes a global parasitic disease. Therapeutic options for eradicating toxoplasmosis are limited. In this study, ZnO and Mg-doped ZnO NPs were prepared, and their structural and morphological chrematistics were investigated. The XRD pattern revealed that Mg-doped ZnO NPs have weak crystallinity and a small crystallite size. FTIR and XPS analyses confirmed the integration of Mg ions into the ZnO framework, producing the high-purity Mg-doped ZnO nanocomposite. TEM micrographs determined the particle size of un-doped ZnO in the range of 29 nm, reduced to 23 nm with Mg2+ replacements. ZnO and Mg-doped ZnO NPs significantly decreased the number of brain cysts (p < 0.05) by 29.30% and 35.08%, respectively, compared to the infected untreated group. The administration of ZnO and Mg-doped ZnO NPs revealed a marked histopathological improvement in the brain, liver, and spleen. Furthermore, ZnO and Mg-doped ZnO NPs reduced P53 expression in the cerebral tissue while inducing CD31 expression, which indicated a protective effect against the infection-induced apoptosis and the restoration of balance between free radicals and antioxidant defense activity. In conclusion, the study proved these nanoparticles have antiparasitic, antiapoptotic, and angiogenetic effects. Being nontoxic compounds, these nanoparticles could be promising adjuvants in treating chronic toxoplasmosis.

Amplifying bactericidal activity: Surfactant-mediated AgBr thin film coating over two-dimensional vertically aligned ZnO nanorods for dark-light dual mode disinfection

Thin film coatings with potent antibacterial properties find critical applications in diverse domains such as medical devices, frequently touched surfaces, and food packaging for combating microbial proliferation across diverse scenarios. Two-dimensional photocatalytic antimicrobial coatings, offering a substantial actual-to-apparent surface ratio, hold immense potential for achieving this objective. However, realizing antibacterial performance not just under light but also in dark conditions remains a challenge. To address this, we present AgBr-coated vertically aligned ZnO nanorods (NRs) thin film architecture, employing a unique surfactant-mediated solution-phase spin-coating approach for achieving uniform deposition of AgBr onto ZnO NRs. The resulting ZnO NRs/AgBr heterojunction architectures have been characterized for their microstructural, morphological, elemental, optical, and wettability attributes. The studies have ascertained the tunability of AgBr content by modulating the concentration of its surfactant-based precursor solution. Further, valence band (VB) analyses revealed an increase in the electron density near to the VB edge. The dual role of AgBr as an antimicrobial agent and a photosensitizer, effectively enhancing the visible-light photodisinfection efficacy of ZnO NRs, has been evident through the dark-light dual mode antibacterial studies. Electron paramagnetic resonance measurements have shown hydroxyl radicals being majorly responsible for the visible-light photodisinfection performance. Encouragingly, reusability assessments showcase significant promise, while artificial sweat-wiping studies on the structures unveil heightened photodisinfection efficacy. This enhancement could be attributed to components like urea and lactic acid, speculated to augment the photocatalytic efficiency by minimizing charge recombination.

Antibacterial and Antifungal Properties of Polyester, Polylactide, and Cotton Nonwovens and Fabrics, by Means of Stable Aqueous Dispersions Containing Copper Silicate and Some Metal Oxides

Literature reviews have described the applications of silver, copper, and zinc ions and metallic particles of Cu, Ti, and Zn oxides, which have been found to be useful antimicrobial reagents for the biofunctionalization of various materials and their surfaces. For this purpose, compositions of water dispersions containing emulsions of synthetic copolymers based on acrylic and vinyl monomers, polysaccharides (hydroxyethyl cellulose and starch), and various additives with wetting and stabilizing properties were used. Many stable water dispersions of different chemical compositions containing bioactive chemical compounds (copper silicate hydrate, titanium dioxide, and zinc oxide (and other auxiliary substances)) were developed. They were used for the preparation of thin hybrid coatings having good antimicrobial properties against Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus aureus), and yeast fungus (Candida albicans). Polyester (PES) and polylactide (PLA) nonwovens were modified using the dip-coating method, while PES and cotton fabrics were biofunctionalized by means of dip-coating and coating methods. The antimicrobial (antibacterial and antifungal) properties of the textile materials (nonwovens and fabrics) biofunctionalized with the above-mentioned bioactive agents exhibiting antimicrobial properties (CuSiO3, TiO2, ZnO, or ZnO∙SiO2) were strongly dependent on the agents' content in the water dispersions. The PES and PLA nonwovens, modified on the surface with water compositions containing copper silicate hydrate, showed good antibacterial properties against the Gram-negative bacteria Escherichia coli, even at a content of 1 wt.% CuSiO3∙xH2O, and against the Gram-positive bacteria Staphylococcus aureus, at the content of at least 5 wt.% CuSiO3∙xH2O. The bacterial growth reduction factor (R) was greater than 99% for most of the samples tested. Good antifungal properties against the fungus Candida albicans were found for the PES and PLA nonwoven fabrics modified with dispersions containing 5-7 wt.% CuSiO3∙xH2O and 4.2-5.0 wt.% TiO2. The addition of TiO2 led to a significant improvement in the antifungal properties of the PES and PLA nonwovens modified in this way. For the samples of PES WIFP-270 and FS F-5 nonwovens, modified with water dispersions containing 5.0 wt.% CuSiO3∙xH2O and 4.2-5.0 wt.% TiO2, the growth reduction factor for the fungus Candida albicans (R) reached values in the range of 80.9-98.0%. These new biofunctionalized polymeric nonwoven textile materials can find practical applications in the manufacture of filters for hospital air-conditioning systems and for the automotive industry, as well as in air purification devices. Moreover, similar antimicrobial modification of fabrics with the dip-coating or coating methods can be applied, for example, in the fabrication of fungi- and mold-resistant garden furniture.

Burdock-Derived Composites Based on Biogenic Gold, Silver Chloride and Zinc Oxide Particles as Green Multifunctional Platforms for Biomedical Applications and Environmental Protection

Green nanotechnology is a rapidly growing field linked to using the principles of green chemistry to design novel nanomaterials with great potential in environmental and health protection. In this work, metal and semiconducting particles (AuNPs, AgClNPs, ZnO, AuZnO, AgClZnO, and AuAgClZnO) were phytosynthesized through a "green" bottom-up approach, using burdock (Arctium lappa L.) aqueous extract. The morphological (SEM/TEM), structural (XRD, SAED), compositional (EDS), optical (UV-Vis absorption and FTIR spectroscopy), photocatalytic, and bio-properties of the prepared composites were analyzed. The particle size was determined by SEM/TEM and by DLS measurements. The phytoparticles presented high and moderate physical stability, evaluated by zeta potential measurements. The investigation of photocatalytic activity of these composites, using Rhodamine B solutions' degradation under solar light irradiation in the presence of prepared powders, showed different degradation efficiencies. Bioevaluation of the obtained composites revealed the antioxidant and antibacterial properties. The tricomponent system AuAgClZnO showed the best antioxidant activity for capturing ROS and ABTS•⁺ radicals, and the best biocidal action against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa. The "green" developed composites can be considered potential adjuvants in biomedical (antioxidant or biocidal agents) or environmental (as antimicrobial agents and catalysts for degradation of water pollutants) applications.

ZnO recovered from spent alkaline batteries as antimicrobial additive for waterborne paints

Biocides are employed to prevent biodeterioration in waterborne paints. In the present study, we used zinc oxide nanoparticles (obtained from spent alkaline batteries) as biocide for indoor waterborne paint at 1.5% of the total solid content in paint. Two different zinc oxides synthesized from spent alkaline batteries, which showed photocatalyst activity, were employed as an antimicrobial agents. After leaching the anode of alkaline batteries, zinc was precipitated from the leachate liquor by introducing oxalic acid (O-ZnO) or sodium carbonate (C-ZnO). The antimicrobial properties of the prepared oxides were tested against Staphylococcus aureus (bacteria), Chaetomium globosum, and Aspergillus fumigatus (fungi) using agar well diffusion method. C-ZnO inhibited the growth of all the strains studied and presented enhanced activity than O-ZnO. The better performance as antimicrobial agent of C-ZnO compared to O-ZnO was attributed to its lower crystallite size, higher amount of oxygen monovacancies, and to its lower band gap energy. The oxide with the best performance in antimicrobial activity, C-ZnO, was employed for the formulation of waterborne acrylic paints. It was observed that 1.5% C-ZnO improved the antifungal properties and antibacterial properties compared to the control sample.