Efficient and prolonged antibacterial activity from porous PLGA microparticles and their application in food preservation

Validation of Multi-epitope Peptides Encapsulated in PLGA Nanoparticles Against Influenza A Virus

BACKGROUND

Influenza is a highly contagious respiratory disease which poses a serious threat to public health globally, causing severe diseases in 3-5 million humans and resulting in 650,000 deaths annually. The current licensed seasonal influenza vaccines lacked cross-reactivity against novel emerging influenza strains as they conferred limited neutralising capabilities. To address the issue, we designed a multi-epitope peptide-based vaccine delivered by the self-adjuvanting PLGA nanoparticles against influenza infections.

METHODS

A total of six conserved peptides representing B- and T-cell epitopes of Influenza A were identified and they were formulated in either incomplete Freund's adjuvant containing CpG ODN 1826 or being encapsulated in PLGA nanoparticles for the evaluation of immunogenicity in BALB/c mice.

RESULTS

The self-adjuvanting PLGA nanoparticles encapsulating the six conserved peptides were capable of eliciting the highest levels of IgG and IFN- γ producing cells. In addition, the immunogenicity of the six peptides encapsulated in PLGA nanoparticles showed greater humoral and cellular mediated immune responses elicited by the mixture of six naked peptides formulated in incomplete Freund's adjuvant containing CpG ODN 1826 in the immunized mice. Peptide 3 from the mixture of six peptides was found to exert necrotic effect on CD3+ T-cells and this finding indicated that peptide 3 should be removed from the nanovaccine formulation.

CONCLUSION

The study demonstrated the self-adjuvanting properties of the PLGA nanoparticles as a delivery system without the need for incorporation of toxic and costly conventional adjuvants in multi-epitope peptide-based vaccines.

Biomedical applications of PLGA nanoparticles in nanomedicine: advances in drug delivery systems and cancer therapy

INTRODUCTION

During the last decades, the ever-increasing proportion of patients with cancer has been led to serious concerns worldwide. Therefore, the development and use of novel pharmaceuticals, like nanoparticles (NPs)-based drug delivery systems (DDSs), can be potentially effective in cancer therapy.

AREA COVERED

Poly lactic-co-glycolic acid (PLGA) NPs, as a kind of bioavailable, biocompatible, and biodegradable polymers, have approved by the Food and Drug Administration (FDA) for some biomedical and pharmaceutical applications. PLGA is comprised of lactic acid (LA) and glycolic acid (GA) and their ratio could be controlled during various syntheses and preparation approaches. LA/GA ratio determines the stability and degradation time of PLGA; lower content of GA results in fast degradation. There are several approaches for preparing PLGA NPs that can affect their various aspects, such as size, solubility, stability, drug loading, pharmacokinetics, and pharmacodynamics, and so on.

EXPERT OPINION

These NPs have indicated the controlled and sustained drug release in the cancer site and can use in passive and active (via surface modification) DDSs. This review aims to provide an overview of PLGA NPs, their preparation approach and physicochemical aspects, drug release mechanism and the cellular fate, DDSs for efficient cancer therapy, and status in the pharmaceutical industry and nanomedicine.

3D bioprinted hydrogel/polymer scaffold with factor delivery and mechanical support for growth plate injury repair

Introduction: Growth plate injury is a significant challenge in clinical practice, as it could severely affect the limb development of children, leading to limb deformity. Tissue engineering and 3D bioprinting technology have great potential in the repair and regeneration of injured growth plate, but there are still challenges associated with achieving successful repair outcomes. Methods: In this study, GelMA hydrogel containing PLGA microspheres loaded with chondrogenic factor PTH(1-34) was combined with BMSCs and Polycaprolactone (PCL) to develop the PTH(1-34)@PLGA/BMSCs/GelMA-PCL scaffold using bio-3D printing technology. Results: The scaffold exhibited a three-dimensional interconnected porous network structure, good mechanical properties, biocompatibility, and was suitable for cellchondrogenic differentiation. And a rabbit model of growth plate injury was appliedto validate the effect of scaffold on the repair of injured growth plate. The resultsshowed that the scaffold was more effective than injectable hydrogel in promotingcartilage regeneration and reducing bone bridge formation. Moreover, the addition ofPCL to the scaffold provided good mechanical support, significantly reducing limbdeformities after growth plate injury compared with directly injected hydrogel. Discussion: Accordingly, our study demonstrates the feasibility of using 3D printed scaffolds for treating growth plate injuries and could offer a new strategy for the development of growth plate tissue engineering therapy.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Synthesis and antibiofilm evaluation of N-acyl-2-aminopyrimidine derivatives against Acinetobacter baumannii

The overuse of antibiotics will led to the increase of drug resistance. Especially, the multidrug-resistant A. baumannii became the leading cause of nosocomial infections with high rates of morbimortality. The drug resistance of A. baumannii is greatly attributed to its biofilm. To alleviate the burden of drug resistance, the anti-virulence signaling strategies was developed. By specifically interfering with the ability of the bacteria to recognize host signals that are needed to establish infection, the bacteria are less able to colonize the host. In this paper, 39 N-acyl-2-aminopyrimidine derivatives were synthesized and tested for their biofilm inhibition efficacy. The screening results reveal that some of the analogues (3ac, 8d) efficiently inhibited the biofilm formation of A. baumannii (IC₅₀ as low as 3.8 μM), and the biofilm inhibition ability was further demonstrated with laser confocal results and extracellular polysaccharides inhibition test. Further motility test reveals our compounds are quorum sensing inhibitors. Besides, the synergistic effect of compounds 3ac and 8d with different antibiotics suggest its potential clinical significance, which was further enhanced by the long time biofilm inhibition test after coating with PLGA. Finally, we also look into the safety of the compounds with cytotoxicity assay.

Prolongation of Fate of Bacteriophages In Vivo by Polylactic-Co-Glycolic-Acid/Alginate-Composite Encapsulation

With concern growing over antibiotics resistance, the use of bacteriophages to combat resistant bacteria has been suggested as an alternative strategy with which to enable the selective control of targeted pathogens. One major challenge that restrains the therapeutic application of bacteriophages as antibacterial agents is their short lifespan, which limits their antibacterial effect in vivo. Here, we developed a polylactic-co-glycolic acid (PLGA)/alginate-composite microsphere for increasing the lifespan of bacteriophages in vivo. The alginate matrix in PLGA microspheres encapsulated the bacteriophages and protected them against destabilization by an organic solvent. Encapsulated bacteriophages were detected in the tissue for 28 days post-administration, while the bacteriophages administered without advanced encapsulation survived in vivo for only 3–5 days. The bacteriophages with extended fate showed prophylaxis against the bacterial pathogens for 28 days post-administration. This enhanced prophylaxis is presumed to have originated from the diminished immune response against these encapsulated bacteriophages because of their controlled release. Collectively, composite encapsulation has prophylactic potential against bacterial pathogens that threaten food safety and public health.

The Investigation of the Structure and Properties of Ozone-Sterilized Nonwoven Biopolymer Materials for Medical Applications

Nowadays, the development and research of nonwoven medical fibrous materials based on biopolymers is an area of a great practical interest. One of the most promising methods for producing nonwoven materials with a highly developed surface is electrospinning (ES). In this article, the possibility of efficient sterilization of ultrathin fibers based on polyhydroxybutyrate (PHB) by ozone treatment was considered. The purpose of this work was to select the most optimal morphology of nonwoven materials for medical purposes and to establish the correlation between the supramolecular structure and the physical properties of fibrous materials while under the influence of an ozone sterilization process.

pH-Sensitive Acetalated Dextran/PLGA-Based Double-Layered Microparticles and Their Application in Food Preservation

Double-layered microparticles (150-190 μm) composed of biodegradable poly(lactic-co-glycolic acid) (PLGA) and pH-responsive acetalated dextran were fabricated using a one-step emulsion solvent evaporation technique. Nearly 80% dextran was released from the microparticles after 20 days of incubation in pH ∼ 5 medium, and the complete disappearance of shell (Ac-dextran) layer was also evident from scanning electron microscopy (SEM) images after 20 days under the same condition. However, the Ac-dextran shell was found to remain unchanged in neutral pH. Dual actives such as antibacterial (benzoic acid) and antioxidant (tocopherol) were incorporated in the shell and core of the microparticles to exploit their applications as food-preserving materials. An accelerated release of antibacterial and a controlled release of antioxidant were found to be useful for prolonging the shelf life of a low-pH food such as pork broth (pH ∼ 5) over 20 days by providing complete bacterial growth inhibition and high radical scavenging efficiency (70-90%).

Recent advances in the formulation of PLGA microparticles for controlled drug delivery

Polymeric microparticles (MPs) are recognized as very popular carriers to increase the bioavailability and bio-distribution of both lipophilic and hydrophilic drugs. Among different kinds of polymers, poly-(lactic-co-glycolic acid) (PLGA) is one of the most accepted materials for this purpose, because of its biodegradability (due to the presence of ester linkages that are degraded by hydrolysis in aqueous environments) and safety (PLGA is a Food and Drug Administration (FDA)-approved compound). Moreover, its biodegradability depends on the number of glycolide units present in the structure, indeed, lower glycol content results in an increased degradation time and conversely a higher monomer unit number results in a decreased time. Due to this feature, it is possible to design and fabricate MPs with a programmable and time-controlled drug release. Many approaches and procedures can be used to prepare MPs. The chosen fabrication methodology influences size, stability, entrapment efficiency, and MPs release kinetics. For example, lipophilic drugs as chemotherapeutic agents (doxorubicin), anti-inflammatory non-steroidal (indomethacin), and nutraceuticals (curcumin) were successfully encapsulated in MPs prepared by single emulsion technique, while water-soluble compounds, such as aptamer, peptides and proteins, involved the use of double emulsion systems to provide a hydrophilic compartment and prevent molecular degradation. The purpose of this review is to provide an overview about the preparation and characterization of drug-loaded PLGA MPs obtained by single, double emulsion and microfluidic techniques, and their current applications in the pharmaceutical industry.Graphic abstract.

Engineering large porous microparticles with tailored porosity and sustained drug release behavior for inhalation

Sustained drug delivery is considered as an effective strategy to improve the treatment of local lung diseases. In this context, inhalation administration of large porous microparticles (LPPs) represents promising prospects. However, one major challenge with said delivery technology is to control the drug release pattern (especially to decrease the burst release) while maintaining a low mass density/high porosity, which is of high significance for the aerodynamic behavior of LPP systems. Here, we show how to engineer drug-loaded, biodegradable LPPs with varying microstructure by means of a premix membrane emulsification-solvent evaporation (PME-SE) method using poly(vinyl pyrrolidone) (PVP) as the pore former. The influence of PVP concentration on the physicochemical properties, in-vitro drug release behavior and in-vitro aerodynamic performance of the drug-loaded microparticles was tested. We demonstrated that the PME-SE technique led to LPPs with favorable pore distribution characteristics (i.e., low external but high internal porosity) as a function of the PVP concentration. In general, more PVP conditioned a larger discrepancy of the internal vs. external porosity. When the external porosity of the LPP formulation (15% of PVP during the manufacturing process) was less than 3%, the burst release of the embedded drug was significantly reduced compared to LPPs prepared by a "conventional" emulsification solvent evaporation method. All the formulations prepared by the PME-SE method had aerodynamic properties suitable for inhalation. This is the first report indicating that the microstructure of LPPs can be tailored using the PME-SE technology with PVP as a suitable pore former. Doing so, we designed LPP formulations having full control over the drug release kinetics and aerodynamic behavior.

Elaboration of Charged Poly(Lactic-co-Glycolic Acid) Microparticles for Effective Release of Tranexamic Acid

In this study, tranexamic acid (TA) was used as a model compound to study the charge effect on the physicochemical properties of poly(lactic-co-glycolic acid) (PLGA) microparticles (MPs). Charged PLGA MPs were elaborated by the incorporation of a quaternary ammonium, cetyltrimethylammonium bromide (CTAB), during the double emulsion solvent evaporation process. Three TA-CTAB-carrying modes of PLGA MPs were designed in the CTAB-free (TA-MP), adsorption (TA-CTAB_AD), or encapsulation (TA-CTAB_EN) form. The obtained MPs were characterized by morphology and TA-MP affinity. The experiment revealed that the three prepared MPs were spherical and smooth, with pores on their surfaces. TA-CTAB_AD had a relatively narrow size distribution, compared with that of TA-MP and TA-CTAB_EN. The particle sizes of TA-MP, TA-CTAB_EN, TA-CTAB_AD were measured as 59 ± 17, 54 ± 20, and 19 ± 8 μm, respectively. The zeta potential of the three MPs was found to be in the order: TA-CTAB_AD > TA-CTAB_EN > TA-MP. Differential scanning calorimetry (DSC) indicated that the manufacturing process had no influence on the glass transition temperature of the MPs, which was close to 48 °C. Thermogravimetric analysis illustrated that the presence of CTAB slightly changed the thermal stability of PLGA MPs. In vitro release showed that TA-CTAB_AD exhibited faster TA release than TA-MP and TA-CTAB_EN in a basic environment (pH of 13), probably because of electrostatic attraction. At pH = 1, the release of TA from TA-CTAB_EN was faster than those from TA-MP and TA-CTAB_AD, probably because of electrostatic repulsion. However, the effect of electrostatic interaction was not significant at pH = 7.4.