Method for rapid mineralization of CO2 with carbide slag in the constant-pressure and continuous-feed way and its reaction heat

Optimized structural parameters and heat extraction capacity of a mixing device for constant pressure CO2 mineralization using alkaline waste

Alkaline waste such as calcium carbide slag is an ideal material for mineralizing CO₂ and promoting atmospheric carbon reduction. In this study, the structural parameters of a mixing device and a thermal extraction method for the high-efficiency mineralization of CO₂ using alkaline waste were optimized. First, the influence of structural parameters was studied by means of numerical simulation, and it was found that when the length-diameter ratio, blade angle, spacing, and diameter of the mixing device were 3, 15, 6 cm, and 14 cm respectively, 2.14 t CO₂ can be mineralized within 1 h. The amount of heat extracted from mineralization of 1 t CO₂ reached 189.60 MJ. In addition, the winding configuration of the heat pipe, which is beneficial for extracting more reaction heat, was optimal, and a model of the relationship between the heat pipe outlet water temperature and flow velocity at the outlet of the heat pipe was established. This study provides theoretical guidance for the field application of alkaline waste for high-efficiency mineralization of CO₂, which can accelerate the realization of peak CO₂ emissions and carbon neutrality.

Simulation of carbon dioxide mineralization and its effect on fault leakage rates in the South Georgia rift basin, southeastern U.S

Over the past few decades, measured levels of atmospheric carbon dioxide have substantially increased. One of the ways to limit the adverse impacts of increased carbon dioxide concentrations is to capture and store it inside Earth's subsurface, a process known as CO₂ sequestration. The success of this method is critically dependent on the ability to confine injected CO₂ for up to thousands of years. Establishing effective maintenance of sealing systems of reservoirs is of importance to prevent CO₂ leakage. In addition, understanding the nature and rate of potential CO₂ leakage related to this injection process is essential to evaluating seal effectiveness and ultimately mitigating global warming.

In this study, we evaluated the impact of common chemical reactions between CO₂ and subsurface materials in situ as well as the relationship between CO₂ plume distribution and the CO₂ leakage within the seal zone that cause mineralization. Using subsurface seismic data and well log information, a three-dimensional model consisting of a reservoir and seal zones was created and evaluated for the South Georgia Rift (SGR) basin in the southeastern U.S. The Computer Modeling Group (CMG, 2017), was used to model the effect of CO₂ mineralization on the optimal values of fault permeability permeabilitydue to fluid substitution between the formation water and CO₂. The model simulated the chemical reactions between carbon dioxide and mafic minerals to produce stable minerals of carbonate rock that form in the fault. Preliminary results show that CO₂ migration can be controlled effectively for fault permeability values between 0.1-1 mD. Within this range, mineralization effectively reduced CO₂ leakage within the seal zone.