Optimisation of Bio-Oil Extraction Process from Beauty Leaf (Calophyllum Inophyllum) Oil Seed as a Second Generation Biodiesel Source

Comparison of Different Extraction Processes on the Physicochemical Properties, Nutritional Components and Antioxidant Ability of Xanthoceras sorbifolia Bunge Kernel Oil

In this study, we investigated and compared the oil yield, physicochemical properties, fatty acid composition, nutrient content, and antioxidant ability of Xanthoceras sorbifolia Bunge (X. sorbifolia) kernel oils obtained by cold-pressing (CP), hexane extraction (HE), aqueous enzymatic extraction (AEE), and supercritical fluid extraction (SFE). The results indicated that X. sorbifolia oil contained a high percentage of monounsaturated fatty acids (49.31–50.38%), especially oleic acid (30.73–30.98%) and nervonic acid (2.73–3.09%) and that the extraction methods had little effect on the composition and content of fatty acids. X. sorbifolia oil is an excellent source of nervonic acid. Additionally, the HE method resulted in the highest oil yield (98.04%), oxidation stability index (9.20 h), tocopherol content (530.15 mg/kg) and sterol content (2104.07 mg/kg). The DPPH scavenging activity rates of the oil produced by SFE was the highest. Considering the health and nutritional value of oils, HE is a promising method for X. sorbifolia oil processing. According to multiple linear regression analysis, the antioxidant capacity of the oil was negatively correlated with sterol and stearic acid content and positively correlated with linoleic acid, arachidic acid and polyunsaturated fatty acid content. This information is important for improving the nutritional value and industrial production of X. sorbifolia.

Integrated polylactic acid and biodiesel production from food waste: Process synthesis and economics

In this study, techno-economic analysis of the sustainable production of polylactic acid (PLA) and biodiesel from Food Waste (FW), with a plant capacity of 50 tons/day, was investigated. In addition, FW of four countries (China, India, Brazil, and the USA) with different compositions of water, protein, lipid and carbohydrate were proposed. Each country has different PLA production rates based on carbohydrate and biodiesel production based on fat. In this study, the FW composition of the USA shows better economic feasibility than other countries. The actual minimum selling price is 6.53 (China), 5.35 (India), 4.75 (Brazil), and 4.29 (US) $/kg. The uncertainty of the MSP was analyzed based on various input limits. The sensitivity analysis was conducted based on biodiesel-selling price, PLA-selling price, income tax, and project lifetime on techno-economic analysis parameters, such as ROI, payback period, IRR and NPV were investigated.

A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application

Utilising pyrolysis as a waste tyre processing technology has various economic and social advantages, along with the fact that it is an effective conversion method. Despite extensive research and a notable likelihood of success, this technology has not yet seen implementation in industrial and commercial settings. In this review, over 100 recent publications are reviewed and summarised to give attention to the current state of global tyre waste management, pyrolysis technology, and plastic waste conversion into liquid fuel. The study also investigated the suitability of pyrolysis oil for use in diesel engines and provided the results on diesel engine performance and emission characteristics. Most studies show that discarded tyres can yield 40–60% liquid oil with a calorific value of more than 40 MJ/kg, indicating that they are appropriate for direct use as boiler and furnace fuel. It has a low cetane index, as well as high viscosity, density, and aromatic content. According to diesel engine performance and emission studies, the power output and combustion efficiency of tyre pyrolysis oil are equivalent to diesel fuel, but engine emissions (NOX, CO, CO, SOX, and HC) are significantly greater in most circumstances. These findings indicate that tyre pyrolysis oil is not suitable for direct use in commercial automobile engines, but it can be utilised as a fuel additive or combined with other fuels.

Maximizing Energy Recovery from Beauty Leaf Tree (Calophyllum inophyllum L.) Oil Seed Press Cake via Pyrolysis

This study optimizes pyrolysis conditions that will maximize energy recovery from the Beauty Leaf Tree (BLT; Calophyllum inophyllum L.) oil seed press cake. Response surface methodology (RSM) was used to determine the behavior of pyrolysis coproducts (solid, liquid and gas) at various temperatures and residence times. One significant discovery was that 61.7% of the energy (of the whole BLT oil seed) was still retained in the BLT oil seed cake after oil extraction. Controlled pyrolysis produced various proportions of biochar, bio-oil and syngas coproducts. Predictive models were developed to estimate both the mass and energy yields of the coproducts. In all experimental runs, the biochar component had the highest mass yield and energy content. Biochar mass yields were high at the lowest operating temperature used, but the energy yields based on a high heating value (HHV) of products were optimal at higher operating temperatures. From the RSM models, energy from the biochar is optimized at a pyrolysis temperature of 425 °C and 75 min of exposure time. This biochar would have a heating value of 29.5 MJ kg−1, which is similar to a good quality coal. At this condition, 56.6% of the energy can be recovered in the form of biochar and 20.6% from the bio-oil. The study shows that almost all the energy present in the feedstock can be recovered via pyrolysis. This indicates that commercial biodiesel producers from BLT oil seed (and other oil seed) should recover these additional valuable energies to generate high value coproducts. This additional efficient energy conversion process via controlled pyrolysis will improve the overall economics and the feasibility of 2nd generation biodiesel production from BLT—a highly potential species for cultivation in many tropical countries.

Optimization Methods for the Extraction of Vegetable Oils: A Review

Most seed oils are edible while some are used generally as raw material for soap production, chocolate, margarine, and recently in biodiesel formulations as potential candidates capable of replacing fossil fuels which are costly and destructive to the environment. Oilseeds are a green and major reservoir which when properly exploited can be used sustainably for the production of chemicals at both the laboratory and industrial scales. Oil extraction is one of the most critical steps in seed oil processing because it determines the quality and quantity of oil extracted. Optimization of the extraction conditions for each extraction method enhances yield and quality meanwhile a carefully chosen optimization process equally has the potential of saving time and heat requirements with an associated consequence on cost reduction of the entire process. In this review, the techniques used to optimize oil extraction from plant materials which can be consulted by stakeholders in the field are brought to focus and the merits and demerits of these methods highlighted. Additionally, different types of optimization techniques used for various processes including modeling and the software employed in the optimization processes are discussed. Finally, the quality of the oil as affected by the methods of extraction and the optimization process used are also presented.