A highly selective and reversible fluorescence "OFF-ON-OFF" chemosensor for Hg2+ based on rhodamine-6G dyes derivative and its application as a molecular logic gate

E- or Z-Isomers Arising from the Geometries of Ligands in the Mercury Complex of 2-(Anthracen-9-ylmethylene)-N-phenylhydrazine Carbothioamide

An anionic mercury(II) complex of 2-(anthracen-9-ylmethylene)-N-phenylhydrazine carbothioamide (HATU) and two isomers of a neutral mercury(II) complex of the anion of the same ligand (ATU) were reported. The anionic complex [Hg(HATU)2Cl2]·CH2Cl2 had a monodentate HATU ligand (a neutral form of the ligand) and chloride ligands. The two conformational isomers were of the neutral mercury(II) complex Hg(ATU)2·2DMF. The two isomers were from the E or Z geometry of the ligands across the conjugated C=N-N=C-N scaffold of the coordinated ligand. The two isomers of the complex were independently prepared and characterized. The spectroscopic properties of the isomers in solution were studied by 1H NMR as well as fluorescence spectroscopy. Facile conversion of the E-isomer to the Z-isomer in solution was observed. Density functional theory (DFT) calculations revealed that the Z-isomer of the complex was stable compared to the E-isomer by an energy of 14.35 kJ/mol; whereas, E isomer of the ligand was more stable than Z isomer by 8.37 KJ/mol. The activation barrier for the conversion of the E-isomer to the Z-isomer of the ligand was 167.37 kJ/mol. The role of the mercury ion in the conversion of the E-form to the Z-form was discussed. The mercury complex [Hg(HATU)2Cl2]·CH2Cl2 had the E-form of the ligand. Distinct photophysical features of these mercury complexes were presented.

Highly selective chemosensor for the sensitive detection of Hg2+ in aqueous media and its cell imaging application

The deleterious toxicity of Hg²⁺ on ecological and biological system makes it crucial for the precise monitoring of Hg²⁺. Herein, we prepared a novel "turn-on" chemosensor N'-(4-(methylthio)butan-2-ylidene) rhodamine B hydrazide (denoted as MTRH) by a simple two-step reaction. MTRH exhibited an ultra-low detection limit (LOD) in fluorescence measurement of Hg²⁺ in pure aqueous media, which was estimated to be 1.3 × 10^-9 mol·L^-1. Moreover, the proposed chemosensor holds the ability of visualizing Hg²⁺ by the distinct color change of the solution. The corresponding recognition mechanism was investigated by Job's plots, mass spectrometry and DFT calculation analysis. Importantly, the characteristics such as high sensitivity, low cytotoxicity and good biocompatibility of MTRH exhibited in the application of detecting Hg²⁺ in real water sample and bioimaging of intracellular Hg²⁺ prove that MTRH is a promising tool to evaluate the levels of Hg²⁺ in complex biological systems.

A dual channel rhodamine appended smart probe for selective recognition of Cu2+ and Hg2+ via "turn on" optical readout

A new rhodamine-6G hydrazone RHMA has been synthesized using rhodamine-6G hydrazide and 5-Allyl-3-methoxysalicylaldehyde. RHMA has been fully characterized with different spectroscopic methods and single crystal XRD. RHMA can selectively recognize Cu²⁺ and Hg²⁺ in aqueous media amongst other common competitive metal ions. A significant change in absorbance was observed with Cu²⁺ and Hg²⁺ ions with emergence of a new peak at λ_max 524 nm and 531 nm respectively. Hg²⁺ ions lead to "turn-on" fluorescence enhancement at λ_max 555 nm. This event of absorbance and fluorescence marks the opening of spirolactum ring causing visual color change from colorless to magenta and light pink.RHMA-Cu²⁺ and RHMA- Hg²⁺complexes are found to be reversible in presence of EDTA^2-ions. RHMA has real application in form of test strip. Additionally, the probe exhibits turn-on readout-based sequential logic gate-based monitoring of Cu²⁺ and Hg²⁺ at ppm levels, which may be able to address real-world challenges through simple synthesis, quick recovery, response in water, "by-eye" detection, reversible response, great selectivity, and a variety of output for accurate investigation.

A spectroscopic probe for hypochlorous acid detection

A spectroscopic probe CMBT was synthesized and characterized. CMBT showed the specific recognition for HClO based on the turn-on blue fluorescence and naked-eye change from pink to colorless. NMR, IR, HRMS-ESI, and spectral analysis suggested that colorimetric and fluorescent change of CMBT to HClO originated from the conversion of CMBT to starting material coumarin-aldehyde 1 caused by the oxidization of HClO, which was responsible for the fluorescence recovery. The detection limit was calculated to be 1.61 μM and 6.58 μM for fluorescence and UV-vis analysis with a range up to 1 mM. HClO's fluorescence detection was successfully achieved in tap and river water samples. The prepared convenient paper test strips showed a distinct color change in varying concentrations of HClO. A multi-input molecular logic circuit was constructed.

Simple easy to make xanthene based optical probe for solid and liquid state Hg2+ ion detection

An easy to make xanthene based optical probe synthesized, precise recognition towards mercury ion been achieved by the probe RP and can detect Hg²⁺ effectively in both for solid and liquid state with a vivid color change. The other tested ion showed no interference, visual and instrumental methods confirms the probe selectivity. Stoichiometry (1:1) confirmed by job's plot, plausible binding of Hg²⁺ ion with the probe confirmed by mass and NMR studies. Test strip prepared for the prompt onsite detection in aqueous medium with outstanding color variation in daylight.

Rapid detection of mercury (II) ions and water content by a new rhodamine B-based fluorescent chemosensor

A rhodamine B-based sensor (RS) was designed and synthesized by a combination of the spirolacton rhodamine B (fluorophore) and multidentate chelates (ionophore) with high affinity towards Hg²⁺. In the presence of Hg²⁺, the resulting red-orange fluorescence (under UV light) and naked eye red color of RS are supposed to be used for quantitative and qualitative measurement of Hg²⁺. Further fluorescent titration and analysis demonstrate that RS can selectively detect Hg²⁺ within 1 s with a low limit of detection (LOD) of 16 nM in acetonitrile media, meanwhile, the association constant (K_a) was calculated to be 0.32 × 10⁵ M^-1. More importantly, the resultant complex (RSHg) of RS and Hg²⁺ has also been successfully applied to detect limited water content in acetonitrile solution.

Fluorescence for biological logic gates

Biological logic gates are smart probes able to respond to biological conditions in behaviors similar to computer logic gates, and they pose a promising challenge for modern medicine. Researchers are creating many kinds of smart nanostructures that can respond to various biological parameters such as pH, ion presence, and enzyme activity. Each of these conditions alone might be interesting in a biological sense, but their interactions are what define specific disease conditions. Researchers over the past few decades have developed a plethora of stimuli-responsive nanodevices, from activatable fluorescent probes to DNA origami nanomachines, many explicitly defining logic operations. Whereas many smart configurations have been explored, in this review we focus on logic operations actuated through fluorescent signals. We discuss the applicability of fluorescence as a means of logic gate implementation, and consider the use of both fluorescence intensity as well as fluorescence lifetime.

A hydrophilic naphthalimide-based fluorescence chemosensor forCu2+ ion: Sensing properties, cell imaging and molecular logic behavior

In this work, a hydrophilic naphthalimide-based fluorescence chemosensor (sensor 1) was synthesized for Cu²⁺ recognition, in which 2-(2-aminoethoxy)ethanol was introduced to improve the hydrophily and Schiff base acted as the multidentate ligand for Cu²⁺. The effect factors, sensing mechanism and regenerability of sensor 1 for Cu²⁺ sensing were systematically investigated. It was found that sensor 1 displayed a long emission wavelength of 532 nm upon excited in visible light region (436 nm), and the good water solubility made it utilized in aqueous media. It could selectively react with Cu²⁺ over other common metal ions to form a 2:1 complex within 1 min and result in significant fluorescence quench. The fluorescence change was linear to 0.5-10.0 μmol L^-1 of Cu²⁺ with a low detection limit of 3.74 × 10^-8 mol L^-1. Sensor 1 has been successfully utilized for analyzing Cu²⁺ in water samples as well as imaging cellular Cu²⁺. Moreover, in view of fluorescence "on-off-on" switches of sensor 1 induced by Cu²⁺ and EDTA, an IMPLICATION logic gate was constructed based on fluorescence mode with Cu²⁺ and EDTA as inputs.

A Fluorescent and Colorimetric Chemosensor for Hg2+ Based on Rhodamine 6G With a Two-Step Reaction Mechanism

A fluorescent and colorimetric chemosensor L based on rhodamine 6G was designed, synthesized, and characterized. Based on a two-step reaction, the chemosensor L effectively recognized Hg²⁺. The interaction between the chemosensor and Hg²⁺ was confirmed by ultraviolet–visible spectrophotometry, fluorescence spectroscopy, electrospray ionization–mass spectrometry, Fourier-transform infrared spectroscopy, and frontier molecular orbital calculations. The chemosensor L was also incorporated into test strips and silica gel plates, which demonstrated good selectivity and high sensitivity for Hg²⁺.

Aggregation induced emission active fluorescent sensor for the sensitive detection of Hg2+ based on organic-inorganic hybrid mesoporous material

We report the preparation of an organic-inorganic hybrid mesoporous material, PHC-SBA-15, derived from the coupling of a pyrene-based derivative PHC and mesoporous SBA-15 silica. Compared with the stable aggregation-induced emission (AIE) properties of PHC, those of PHC-SBA-15 were more promoted and active due to the fixation of PHC and the space limitation in mesoporous SBA-15. The aggregation and disaggregation activities can be tuned by controlling the concentrations in aqueous media and changing the fluorescence color from yellow to blue. In addition to the controllable AIE properties, PHC-SBA-15 was applied for the highly selective and sensitive detection of Hg²⁺ through the fluorescence quenching of monomeric pyrene in aqueous media. The fluorescence intensity at 395 nm was linearly proportional to that of Hg²⁺ in the concentration ranges of 0-1.0 × 10^-5 and 1.0 × 10^-5-10 × 10^-5 M, showing a low detection limit of 1.02 × 10^-7 M. This work provides an effective strategy for modulating the AIE properties from non-active to active by introducing AIE stable molecule into mesoporous silica material. This method also favors the development of fluorescent sensors for detecting targets with high sensitivity and selectivity in aqueous media with less synthetic difficulties.

Long-Wavelength Fluorescent Chemosensors for Hg2+ based on Pyrene

A novel long-wavelength turn-on fluorescent chemosensor CS based on pyrene was synthesized to detect Hg²⁺. In the presence of other metal ions, CS could effectively recognize Hg²⁺ and produce the turn-on fluorescent emission at 607 nm. Also, the absorption spectrum exhibited red-shift. Meanwhile, the change of the solution color from yellow to orange was directly observed by the naked eye. The interaction between CS and Hg²⁺ was confirmed by the Job's plot, electrospray ionization mass spectrometry, scanning electron microscopy, and density functional theory calculations. It was found that the fluorescence of CS could be reversible when I^- was added into the solution of CS and Hg²⁺. CS illustrated high selectivity and good sensitivity for Hg²⁺ with the limit of detection of 36 nm. Moreover, CS could be utilized as test strips and silica gel plates to identify Hg²⁺.

Rhodamine-azobenzene based single molecular probe for multiple ions sensing: Cu2+, Al3+, Cr3+ and its imaging in human lymphocyte cells

A photoinduced electron transfer (PET) and chelation-enhanced fluorescence (CHEF) regulated rhodamine-azobenzene chemosensor (L) was synthesized for chemoselective detection of Al³⁺, Cr³⁺, and Cu²⁺ by UV-Visible absorption study whereas Al³⁺ and Cr³⁺ by fluorimetric study in EtOH-H₂O solvent. L showed a clear fluorescence emission enhancement of 21 and 16 fold upon addition of Al³⁺ and Cr³⁺ due to the 1:1 host-guest complexation, respectively. This is first report on rhodamine-azobenzene based Cr³⁺ chemosensor. The complex formation, restricted imine isomerization, inhibition of PET (photo-induced electron transfer) process with the concomitant opening of the spirolactam ring induced a turn-on fluorescence response. The higher binding constants 6.7 × 10³ M^-1 and 3.8 × 10³ M^-1 for Al³⁺ and Cr³⁺, respectively and lower detection limits 1 × 10^-6 M and 2 × 10^-6 M for Al³⁺ and Cr³⁺, respectively in a buffered solution with high reversible nature describes the potential of L as an effective tool for detecting Al³⁺ and Cr³⁺ in a biological system with higher intracellular resolution. Finally, L was used to map the intracellular concentration of Al³⁺ and Cr³⁺ in human lymphocyte cells (HLCs) at physiological pH very effectively. Altogether, our findings will pave the way for designing new chemosensors for multiple analytes and those chemosensors will be effective for cell imaging study.

Coumarin-based Hg2+ fluorescent probe: Fluorescence turn-on detection for Hg2+ bioimaging in living cells and zebrafish

The need in developing fluorescent probes for trace metal ion detection in biological samples has been an important issue. Herein, a reaction-based fluorescent probe PIC containing a perimidine moiety was designed and synthesized for Hg²⁺ detection. The probe can selectively distinguish Hg²⁺ with 42-fold fluorescent enhancement from the other metal ions at physiological pH. This probe can detect Hg²⁺ with the detection limit of 1.08 μM. The sensor PIC can be applied to real-time detection of Hg²⁺ in cells with blue emission.

Synthesis of methionine methyl ester-modified coumarin as the fluorescent-colorimetric chemosensor for selective detection Cu2+ with application in molecular logic gate

A methionine methyl ester-modified coumarin derivative was designed and synthesized, which could discriminate Cu²⁺ from other metal ions in HEPES buffer (10 mM, pH 7.4)/CH₃CN (40:60, V/V). The detection limit of WM toward Cu²⁺ was 1.84 × 10^-7 M, which was lower than the concentration of Cu²⁺ in drinking water suggested by WHO and EPA. And the proposed coordination mode exhibiting the interaction between WM and Cu²⁺ was studied by UV-Vis, fluorescence spectrum, ESI-MS and FT-IR. Based on the fluorescent reversibility of WM, WM was considered as a molecular logic gate and molecular keypad lock. In addition, the test strips and the silica gel plates prepared from the solution of WM also demonstrate the favorable selectivity toward Cu²⁺.