Unambiguous assignment of intramolecular chemical cross-links in modified mammalian membrane proteins by Fourier transform-tandem mass spectrometry

Gas-Phase Ion/Ion Chemistry for Structurally Sensitive Probes of Gaseous Protein Ion Structure: Electrostatic and Electrostatic to Covalent Cross-Linking

Intramolecular interactions within a protein are key in maintaining protein tertiary structure and understanding how proteins function. Ion mobility-mass spectrometry (IM-MS) has become a widely used approach in structural biology since it provides rapid measurements of collision cross sections (CCS), which inform on the gas-phase conformation of the biomolecule under study. Gas-phase ion/ion reactions target amino acid residues with specific chemical properties and the modified sites can be identified by MS. In this study, electrostatically reactive, gas-phase ion/ion chemistry and IM-MS are combined to characterize the structural changes between ubiquitin electrosprayed from aqueous and denaturing conditions. The electrostatic attachment of sulfo-NHS acetate to ubiquitin via ion/ion reactions and fragmentation by electron-capture dissociation (ECD) provide the identification of the most accessible protonated sites within ubiquitin as the sulfonate group forms an electrostatic complex with accessible protonated side chains. The protonated sites identified by ECD from the different solution conditions are distinct and, in some cases, reflect the disruption of interactions such as salt bridges that maintain the native protein structure. This agrees with previously published literature demonstrating that a high methanol concentration at low pH causes the structure of ubiquitin to change from a native (N) state to a more elongated A state. Results using gas-phase, electrostatic cross-linking reagents also point to similar structural changes and further confirm the role of methanol and acid in favoring a more unfolded conformation. Since cross-linking reagents have a distance constraint for the two reactive sites, the data is valuable in guiding computational structures generated by molecular dynamics. The research presented here describes a promising strategy that can detect subtle changes in the local environment of targeted amino acid residues to inform on changes in the overall protein structure.

To Cleave or Not To Cleave in XL-MS?

Cross-linking mass spectrometry (XL-MS) is an efficient technique for uncovering structural features and interactions of the in-solution state of the proteins under investigation. Distance constraints obtained by this technique are highly complementary to classical structural biology approaches like X-ray crystallography and cryo-EM and have successfully been leveraged to shed light on protein structures of increasing size and complexity. To accomplish this, small reagents are used that typically incorporate two amine reactive moieties connected by a spacer arm and that can be applied in solution to protein structures of any size. Over the years, many reagents initially developed for different applications were adopted, and others were specifically developed for XL-MS. This has resulted in a vast array of options, making it difficult to make the right choice for specific experiments. Here, we delve into the previous decade of published XL-MS literature to uncover which workflows have been predominantly applied. We focus on application papers as these represent proof that biologically valid results can be extracted. This ignores some more recent approaches that did not have sufficient time to become more widely applied, for which we supply a separate discussion. From our selection, we extract information on the types of samples, cross-linking reagent, prefractionation, instruments, and data analysis, to highlight widely used workflows. All of the results are summarized in an easy-to-use flow chart defined by selection points resulting from our analysis. Although potentially biased by our own experiences, we expect this overview to be useful for novices stepping into this rapidly expanding field.

Native MS Analysis of Bacteriorhodopsin and an Empty Nanodisc by Orthogonal Acceleration Time-of-Flight, Orbitrap and Ion Cyclotron Resonance

Over the past two decades, orthogonal acceleration time-of-flight has been the de facto analyzer for solution and membrane-soluble protein native mass spectrometry (MS) studies; this however is gradually changing. Three MS instruments are compared, the Q-ToF, Orbitrap, and the FT-ICR, to analyze, under native instrument and buffer conditions, the seven-transmembrane helical protein bacteriorhodopsin-octylglucoside micelle and the empty nanodisc (MSP1D1-Nd) using both MS and tandem-MS modes of operation. Bacteriorhodopsin can be released from the octylglucoside-micelle efficiently on all three instruments (MS-mode), producing a narrow charge state distribution (z = 8+ to 10+) by either increasing the source lens or collision cell (or HCD) voltages. A lower center-of-mass collision energy (0.20-0.41 eV) is required for optimal bacteriorhodopsin liberation on the FT-ICR, in comparison to the Q-ToF and Orbitrap instruments (0.29-2.47 eV). The empty MSP1D1-Nd can be measured with relative ease on all three instruments, resulting in a highly complex spectrum of overlapping, polydisperse charge states. There is a measurable difference in MSP1D1-Nd charge state distribution (z = 15+ to 26+), average molecular weight (141.7 to 169.6 kDa), and phospholipid incorporation number (143 to 184) under low activation conditions. Utilizing tandem-MS, bacteriorhodopsin can be effectively liberated from the octylglucoside-micelle by collisional (Q-ToF and FT-ICR) or continuous IRMPD activation (FT-ICR). MSP1D1-Nd spectral complexity can also be significantly reduced by tandem-MS (Q-ToF and FT-ICR) followed by mild collisional or continuous IRMPD activation, resulting in a spectrum in which the charge state and phospholipid incorporation levels can easily be determined.

Probing Protein 3D Structures and Conformational Changes Using Electrochemistry-Assisted Isotope Labeling Cross-Linking Mass Spectrometry

This study presents a new chemical cross-linking mass spectrometry (MS) method in combination with electrochemistry and isotope labeling strategy for probing both protein three-dimensional (3D) structures and conformational changes. For the former purpose, the target protein/protein complex is cross-linked with equal mole of premixed light and heavy isotope labeled cross-linkers carrying electrochemically reducible disulfide bonds (i.e., DSP-d0 and DSP-d8 in this study, DSP = dithiobis[succinimidyl propionate]), digested and then electrochemically reduced followed with online MS analysis. Cross-links can be quickly identified because of their reduced intensities upon electrolysis and the presence of doublet isotopic peak characteristics. In addition, electroreduction converts cross-links into linear peptides, facilitating MS/MS analysis to gain increased information about their sequences and modification sites. For the latter purpose of probing protein conformational changes, an altered procedure is adopted, in which the protein in two different conformations is cross-linked using DSP-d0 and DSP-d8 separately, and then the two protein samples are mixed in 1:1 molar ratio. The merged sample is subjected to digestion and electrochemical mass spectrometric analysis. In such a comparative cross-linking experiment, cross-links could still be rapidly recognized based on their responses to electrolysis. More importantly, the ion intensity ratios of light and heavy isotope labeled cross-links reveal the conformational changes of the protein, as exemplified by examining the effect of Ca(2+) on calmodulin conformation alternation. This new cross-linking MS method is fast and would have high value in structural biology. Graphical Abstract ᅟ.

Applying mass spectrometry to study non-covalent biomolecule complexes

Non-covalent interactions are essential for the structural organization of biomacromolecules and play an important role in molecular recognition processes, such as the interactions between proteins, glycans, lipids, DNA, and RNA. Mass spectrometry (MS) is a powerful tool for studying of non-covalent interactions, due to the low sample consumption, high sensitivity, and label-free nature. Nowadays, native-ESI MS is heavily used in studies of non-covalent interactions and to understand the architecture of biomolecular complexes. However, MALDI-MS is also becoming increasingly useful. It is challenging to detect the intact complex without fragmentation when analyzing non-covalent interactions with MALDI-MS. There are two methodological approaches to do so. In the first approach, different experimental and instrumental parameters are fine-tuned in order to find conditions under which the complex is stable, such as applying non-acidic matrices and collecting first-shot spectra. In the second approach, the interacting species are "artificially" stabilized by chemical crosslinking. Both approaches are capable of studying non-covalently bound biomolecules even in quite challenging systems, such as membrane protein complexes. Herein, we review and compare native-ESI and MALDI MS for the study of non-covalent interactions.

Imidate-based cross-linkers for structural proteomics: increased charge of protein and peptide ions and CID and ECD fragmentation studies

Chemical cross-linking is an attractive low-resolution technique for structural studies of protein complexes. Distance constraints obtained from cross-linked peptides identified by mass spectrometry (MS) are used to construct and validate protein models. Amidinating cross-linkers such as diethyl suberthioimidate (DEST) have been used successfully in chemical cross-linking experiments. In this work, the application of a commercial diimidate cross-linking reagent, dimethyl suberimidate (DMS), was evaluated with model peptides and proteins. The peptides were designed with acetylated N-termini followed by random sequences containing two Lys residues separated by an Arg residue. After cross-linking reactions, intra- and intermolecular cross-linked species were submitted to CID and ECD dissociations to study their fragmentation features in the gas phase. Fragmentation of intramolecular peptides by collision induced dissociation (CID) demonstrates a unique two-step fragmentation pathway involving formation of a ketimine as intermediate. Electron capture and electron transfer dissociation (ECD and ETD) experiments demonstrated that the cyclic moiety is not dissociated. Intermolecular species demonstrated previously described fragmentation behavior in both CID and ECD experiments. The charge state distributions (CSD) obtained after reaction with DMS were compared with those obtained with disuccinimidyl suberate (DSS). CSDs for peptides and proteins were increased after their reaction with DMS, owing to the higher basicity of DMS modified species. These features were also observed in LC-MS experiments with bovine carbonic anhydrase II (BCA) after cross-linking with DMS and tryptic proteolysis. Cross-linked peptides derived from this protein were identified at high confidence and those species were in agreement with the crystal structure of BCA.

Enhanced identification of zero-length chemical cross-links using label-free quantitation and high-resolution fragment ion spectra

Chemical cross-linking coupled to mass spectrometry provides structural information that is useful for probing protein conformations and providing experimental support for molecular models. "Zero-length" cross-links have greater value for these applications than longer cross-links because they provide more stringent distance constraints. However, this method is less commonly utilized because it cannot take advantage of isotopic labels, MS-labile bonds, or enrichment tags to facilitate identification. In this study, we combined label-free precursor ion quantitation and targeted tandem mass spectrometry with a new software tool, Zero-length Cross-link Miner (ZXMiner), to form a multitiered analysis strategy. A major, critical objective was to simultaneously achieve very high accuracy with essentially no false-positive cross-link identifications while maintaining a good depth of analysis. Our strategy was optimized on several proteins with known crystal structures. Comparison of ZXMiner to several existing cross-link analysis software showed that other algorithms detected less true positive cross-links and were far less accurate. Although prior use of zero-length cross-linking was typically restricted to small proteins, ZXMiner and the associated strategy enable facile analysis of very large protein complexes. This was demonstrated by identification of zero-length cross-links using purified 526 kDa spectrin heterodimers and intact red cell membranes and membrane skeletons.

Purification and characterization of transcription factors

Transcription factors (TFs) are essential for the expression of all proteins, including those involved in human health and disease. However, TFs are resistant to proteomic characterization because they are frequently masked by more abundant proteins due to the limited dynamic range of capillary liquid chromatography-tandem mass spectrometry and protein database searching. Purification methods, particularly strategies that exploit the high affinity of TFs for DNA response elements (REs) on gene promoters, can enrich TFs prior to proteomic analysis to improve dynamic range and penetrance of the TF proteome. For example, trapping of TF complexes specific for particular REs has been achieved by recovering the element DNA-protein complex on solid supports. Additional methods for improving dynamic range include two- and three-dimensional gel electrophoresis incorporating electrophoretic mobility shift assays and Southwestern blotting for detection. Here we review methods for TF purification and characterization. We fully expect that future investigations will apply these and other methods to illuminate this important but challenging proteome.

Cross-linking and mass spectrometry methodologies to facilitate structural biology: finding a path through the maze

Multiprotein complexes, rather than individual proteins, make up a large part of the biological macromolecular machinery of a cell. Understanding the structure and organization of these complexes is critical to understanding cellular function. Chemical cross-linking coupled with mass spectrometry is emerging as a complementary technique to traditional structural biology methods and can provide low-resolution structural information for a multitude of purposes, such as distance constraints in computational modeling of protein complexes. In this review, we discuss the experimental considerations for successful application of chemical cross-linking-mass spectrometry in biological studies and highlight three examples of such studies from the recent literature. These examples (as well as many others) illustrate the utility of a chemical cross-linking-mass spectrometry approach in facilitating structural analysis of large and challenging complexes.

Gas-phase intramolecular protein crosslinking via ion/ion reactions: ubiquitin and a homobifunctional sulfo-NHS ester

Gas-phase intra-molecular crosslinking of protein ubiquitin cations has been demonstrated via ion/ion reactions with anions of a homobifunctional N-hydroxysulfosuccinimide (sulfo-NHS) ester reagent. The ion/ion reaction between multiply-protonated ubiquitin and crosslinker monoanions produces a stable, charge-reduced complex. Covalent crosslinking is indicated by the consecutive loss of 2 molecules of sulfo-NHS under ion trap collisional activation conditions. Covalent modification is verified by the presence of covalently crosslinked sequence ions produced by ion-trap collision-induced dissociation of the ion generated from the losses of sulfo-NHS. Analysis of the crosslinked sequence fragments allows for the localization of crosslinked primary amines, enabling proximity mapping of the gas-phase 3-D structures. The presence of two unprotonated reactive sites within the distance constraint of the crosslinker is required for successful crosslinking. The ability to covalently crosslink is, therefore, sensitive to protein charge state. As the charge state increases, fewer reactive sites are available and protein structure is more likely to become extended because of intramolecular electrostatic repulsion. At high charge states, the reagent shows little evidence for covalent crosslinking but does show evidence for 'electrostatic crosslinking' in that the binding of the sulfonate groups to the protein is sufficiently strong that backbone cleavages are favored over reagent detachment under ion trap collisional activation conditions.

Chemical cross-linkers for protein structure studies by mass spectrometry

The cross-linking approach combined with MS for protein structure determination is one of the most striking examples of multidisciplinary success. Indeed, it has become clear that the bottleneck of the method was the detection and the identification of low-abundance cross-linked peptides in complex mixtures. Sample treatment or chromatography separation partially addresses these issues. However, the main problem comes from over-represented unmodified peptides, which do not yield any structural information. A real breakthrough was provided by high mass accuracy measurement, because of the outstanding technical developments in MS. This improvement greatly simplified the identification of cross-linked peptides, reducing the possible combinations matching with an observed m/z value. In addition, the huge amount of data collected has to be processed with dedicated software whose role is to propose distance constraints or ideally a structural model of the protein. In addition to instrumentation and algorithms efficiency, significant efforts have been made to design new cross-linkers matching all the requirements in terms of reactivity and selectivity but also displaying probes or reactive systems facilitating the isolation, the detection of cross-links, or the interpretation of MS data. These chemical features are reviewed and commented on in the light of the more recent strategies.

Structural model of lymphocyte receptor NKR-P1C revealed by mass spectrometry and molecular modeling

NKR-P1C is an activating immune receptor expressed on the surface of mouse natural killer cells. It has been widely used as a marker for NK cell identification in different mice strains. Recently we solved a crystal structure of the C-type lectin-like domain of a homologous protein, NKR-P1A, using X-ray crystallography and also described the strategy for rapid characterization of the protein conformation in solution. This procedure utilized chemical cross-linking, hydrogen/deuterium exchange, and molecular modeling. It was found that the solution structure differs from the crystal structure in the conformation of the loop region. The loop, detached from the protein compact core in the crystal structure, is closely attached to the core of the protein in solution. Here we present and interpret the solution structure of the C-type lectin-like domain of NKR-P1C using chemical cross-linking and molecular modeling. The validation of the model and conformation of the loop region in NKR-P1C were addressed using ion-mobility mass spectrometry.

Mass spectrometry-based structural proteomics

Structural proteomics is the application of protein chemistry and modern mass spectrometric techniques to problems such as the characterization of protein structures and assemblies and the detailed determination of protein-protein interactions. The techniques used in structural proteomics include crosslinking, photoaffinity labeling, limited proteolysis, chemical protein modification and hydrogen/deuterium exchange, all followed by mass spectrometric analysis. None of these methods alone can provide complete structural information, but a "combination" of these complementary approaches can be used to provide enough information for answering important biological questions. Structural proteomics can help to determine, for example, the detailed structure of the interfaces between proteins that may be important drug targets and the interactions between proteins and ligands. In this review, we have tried to provide a brief overview of structural proteomics methodologies, illustrated with examples from our laboratory and from the literature.

Identification of respective lysine donor and glutamine acceptor sites involved in factor XIIIa-catalyzed fibrin α chain cross-linking

Factor XIIIa-catalyzed ε-(γ-glutamyl)-lysyl bonds between glutamine and lysine residues on fibrin α and γ chains stabilize the fibrin clot and protect it from mechanical and proteolytic damage. The cross-linking of γ chains is known to involve the reciprocal linkages between Gln(398) and Lys(406). In α chains, however, the respective lysine and glutamine partners remain largely unknown. Traditional biochemical approaches have only identified the possible lysine donor and glutamine acceptor sites but have failed to define the respective relationships between them. Here, a differential mass spectrometry method was implemented to characterize cross-linked α chain peptides originating from native fibrin. Tryptic digests of fibrin that underwent differential cross-linking conditions were analyzed by high resolution Fourier transform mass spectrometry. Differential intensities associated with monoisotopic masses of cross-linked peptides were selected for further characterization. A fit-for-purpose algorithm was developed to assign cross-linked peptide pairs of fibrin α chains to the monoisotopic masses relying on accurate mass measurement as the primary criterion for identification. Equipped with hypothesized sequences, tandem mass spectrometry was then used to confirm the identities of the cross-linked peptides. In addition to the reciprocal cross-links between Gln(398) and Lys(406) on the γ chains of fibrin (the positive control of the study), nine specific cross-links (Gln(223)-Lys(508), Gln(223)-Lys(539), Gln(237)-Lys(418), Gln(237)-Lys(508), Gln(237)-Lys(539), Gln(237)-Lys(556), Gln(366)-Lys(539), Gln(563)-Lys(539), and Gln(563)-Lys(601)) on the α chains of fibrin were newly identified. These findings provide novel structural details with respect to the α chain cross-linking compared with earlier efforts.

Fragmentation features of intermolecular cross-linked peptides using N-hydroxy- succinimide esters by MALDI- and ESI-MS/MS for use in structural proteomics

The use of mass spectrometry coupled with chemical cross-linking of proteins has become one of the most useful tools for proteins structure and interactions studies. One of the challenges in these studies is the identification of the cross-linked peptides. The interpretation of the MS/MS data generated in cross-linking experiments using N-hydroxy succinimide esters is not trivial once a new amide bond is formed allowing new fragmentation pathways, unlike linear peptides. Intermolecular cross-linked peptides occur when two different peptides are connected by the cross-linker and they yield information on the spatial proximity of different domains (within a protein) or proteins (within a complex). In this article, we report a detailed fragmentation study of intermolecular cross-linked peptides, generated from a set of synthetic peptides, using both ESI and MALDI to generate the precursor ions. The fragmentation features observed here can be helpful in the interpretation and identification of cross-linked peptides present in cross-linking experiments and be further implemented in search engine's algorithms.

Mass spectrometry evidence for cisplatin as a protein cross-linking reagent

Cisplatin is a potent anticancer drug, which functions by cross-linking adjacent DNA guanine residues. However within 1 day of injection, 65-98% of the platinum in the blood plasma is protein-bound. It is generally accepted that cisplatin binds to methionine and histidine residues, but what is often underappreciated is that platinum from cisplatin has a 2+ charge and can form up to four bonds. Thus, it has the potential to function as a cross-linker. In this report, the cross-linking ability of cisplatin is demonstrated by Fourier transform ion cyclotron resonance (FTICR) mass spectrometry (MS) with the use of standard peptides, the 16.8 kDa protein calmodulin (CaM), but was unsuccessful for the 64 kDa protein hemoglobin. The high resolution and mass accuracy of FTICR MS along with the high degree of fragmentation of large peptides afforded by collisionally activated dissociation (CAD) and electron capture dissociation (ECD) are shown to be a valuable means of characterizing cross-linking sites. Cisplatin is different from current cross-linking reagents by targeting new functional groups, thioethers, and imidazoles groups, which provides complementarity with existing cross-linkers. In addition, platinum(II) inherently has two positive charges which enhance the detection of cross-linked products. Higher charge states not only promote the detection of cross-linking products with less purification but result in more comprehensive MS/MS fragmentation and can assist in the assignment of modification sites. Moreover, the unique isotopic pattern of platinum flags cross-linking products and modification sites by mass spectrometry.

IRMPD and ECD fragmentation of intermolecular cross-linked peptides

Despite the increasing number of studies using mass spectrometry for three dimensional analyses of proteins (MS3D), the identification of cross-linked peptides remains a bottleneck of the method. One of the main reasons for this is the lack of knowledge about the fragmentation of these species. Intermolecular cross-linked peptides are considered the most informative species present in MS3D experiment, since different peptides are connected by a cross-linker, the peptides chain can be either from a single protein, providing information about protein folding, or from two different proteins in a complex, providing information about binding partners, complex topology and interaction sites. These species tend to be large and highly charged in ESI, making comprehensive fragmentation by CID MS/MS problematic. On the other hand, these highly charged peptides are very suitable for dissociation using both infrared multiphoton dissociation (IRMPD) and electron capture dissociation (ECD). Herein, we report the fragmentation study of intermolecular cross-linked peptides using IRMPD and ECD. Using synthetic peptides and different commercial cross-linkers, a series of intermolecular cross-linked peptides were generate, and subsequently fragmented by IRMPD and ECD in a FT-ICR-MS instrument. Due to the high mass accuracy and resolution of the FT-ICR, the fragment ions could be attributed with high confidence. The peptides sequence coverage and fragmentation features obtained from IRMPD and ECD were compared for all charge states.

Xlink-identifier: an automated data analysis platform for confident identifications of chemically cross-linked peptides using tandem mass spectrometry

Chemical cross-linking combined with mass spectrometry provides a powerful method for identifying protein-protein interactions and probing the structure of protein complexes. A number of strategies have been reported that take advantage of the high sensitivity and high resolution of modern mass spectrometers. Approaches typically include synthesis of novel cross-linking compounds, and/or isotopic labeling of the cross-linking reagent and/or protein, and label-free methods. We report Xlink-Identifier, a comprehensive data analysis platform that has been developed to support label-free analyses. It can identify interpeptide, intrapeptide, and deadend cross-links as well as underivatized peptides. The software streamlines data preprocessing, peptide scoring, and visualization and provides an overall data analysis strategy for studying protein-protein interactions and protein structure using mass spectrometry. The software has been evaluated using a custom synthesized cross-linking reagent that features an enrichment tag. Xlink-Identifier offers the potential to perform large-scale identifications of protein-protein interactions using tandem mass spectrometry.

Crosslinking combined with mass spectrometry for structural proteomics

The method of crosslinking combined with mass spectrometry is being gradually accepted as a technology enabling detailed structural information on proteins and protein complexes. Intrinsic challenges of the method, which have prevented its widespread use, are being progressively addressed by improvements in mass spectrometry instrumentation capabilities, by the development of new crosslinking reagents, and by the development of specialized software tools for processing of mass spectrometric crosslinking data. This review focuses on recent literature concerning the development of specialized crosslinking reagents and approaches for mass spectrometry-based applications. Critical features of crosslinking reagents for optimum mass spectrometric performance, such as isotopic coding, cleavability, affinity groups, structure of the linkers, and reactive groups, are assessed. Requirements for the design of crosslinking reagents to make them well suited for mass spectrometric detection and analysis are summarized.

Elucidating the higher-order structure of biopolymers by structural probing and mass spectrometry: MS3D

Chemical probing represents a very versatile alternative for studying the structure and dynamics of substrates that are intractable by established high-resolution techniques. The implementation of MS-based strategies for the characterization of probing products has not only extended the range of applicability to virtually all types of biopolymers but has also paved the way for the introduction of new reagents that would not have been viable with traditional analytical platforms. As the availability of probing data is steadily increasing on the wings of the development of dedicated interpretation aids, powerful computational approaches have been explored to enable the effective utilization of such information to generate valid molecular models. This combination of factors has contributed to making the possibility of obtaining actual 3D structures by MS-based technologies (MS3D) a reality. Although approaches for achieving structure determination of unknown targets or assessing the dynamics of known structures may share similar reagents and development trajectories, they clearly involve distinctive experimental strategies, analytical concerns and interpretation paradigms. This Perspective offers a commentary on methods aimed at obtaining distance constraints for the modeling of full-fledged structures while highlighting common elements, salient distinctions and complementary capabilities exhibited by methods used in dynamics studies. We discuss critical factors to be addressed for completing effective structural determinations and expose possible pitfalls of chemical methods. We survey programs developed for facilitating the interpretation of experimental data and discuss possible computational strategies for translating sparse spatial constraints into all-atom models. Examples are provided to illustrate how the concerted application of very diverse probing techniques can lead to the solution of actual biological systems.

Modified electrophoretic and digestion conditions allow a simplified mass spectrometric evaluation of disulfide bonds

Proper formation of disulfide bonds in proteins is a prerequisite to their stability and function. Information on disulfide pattern may therefore serve as an indication of the proper folding of recombinant proteins, and can also be used in protein homology modeling for the purpose of structure refinement. Protein handling and digestion at basic pH leads to disulfide bond scrambling. That is why the samples are usually treated and digested at low pH where no scrambling occurs. Unfortunately, the specific proteases used in protein research are active at high pH values. Here, we present a complete sample handling protocol, which allows processing of disulfide containing proteins at basic pH. We modified the standard SDS gel electrophoresis and protein digestion conditions by the addition of an oxidative agent, cystamine. This modification prevented disulfide scrambling, which we otherwise observed in the samples handled according to the general protocol. Lysozyme from hen egg was used as a model protein for the development of the method. We then applied our protocol to human leukocyte antigen CD69, for which the disulfide bonding is known, but only for its monomeric form. In addition, the disulfide arrangement was then 'de novo' identified in the recombinant murine leukocyte receptor NKR-P1A and in the larger glycosylated proteins beta-N-acetylhexosaminidases from Aspergillus oryzae and Penicillium oxalicum.

Annexin A2/P11 interaction: new insights into annexin A2 tetramer structure by chemical crosslinking, high-resolution mass spectrometry, and computational modeling

During the past few years, the structural analysis of proteins and protein complexes by chemical crosslinking and mass spectrometry has enjoyed increasing popularity. With this approach we have investigated the quaternary structure of the complex between annexin A2 and p11, which is involved in numerous cellular processes. Although high-resolution data are available for both interaction partners as well as for the complex between two p11 subunits and two annexin A2 N-terminal peptides, the structure of the complete annexin A2/p11 heterotetramer has not yet been solved at high resolution. Thus, the quaternary structure of the biologically relevant, membrane-bound annexin A2/p11 complex is still under discussion, while the existence of a heterotetramer or a heterooctamer is the prevailing opinion. We gained further insight into the spatial organization of the annexin A2/p11 heterotetramer by employing chemical crosslinking combined with high-resolution mass spectrometry. Furthermore, tandem mass spectrometry served as a tool for an exact localization of crosslinked amino acid residues and for a confirmation of crosslinked product assignment. On the basis of distance constraints from the crosslinking data we derived structural models of the annexin A2/p11 heterotetramer by computational docking with Rosetta. We propose an octameric model for the annexin A2/p11 complex, which exerts annexin A2 function. The proposed structure of the annexin A2/p11 octamer differs from so far suggested models and sheds new light into annexin A2/p11 interaction.

Application of fractional mass for the identification of peptide-oligonucleotide cross-links by mass spectrometry

A method has been developed to identify oligonucleotide-peptide heteroconjugates by accurate mass measurements using MS. The fractional mass (the decimal fraction mass value following the monoisotopic nominal mass) for peptides and oligonucleotides is different due to their differing molecular compositions. This property has been used to develop the general conditions necessary to differentiate peptides and oligonucleotides from oligonucleotide-peptide heteroconjugates. Peptides and oligonucleotides generated by the theoretical digestion of various proteins and nucleic acids were plotted as nominal mass versus fractional mass. Such plots reveal that three nucleotides cross-linked to a peptide produce enough change in the fractional mass to be recognized from non-cross-linked peptides at the same nominal mass. Experimentally, a Cytochrome c digest was spiked with an oligonucleotide-peptide heteroconjugate and conditions for analyzing the sample using liquid chromatography (LC)-MS were optimized. Upon analysis of this mixture, all detected masses were plotted on a fractional mass plot and the heteroconjugate could be readily distinguished from non-cross-linked peptides. The method developed here can be incorporated into a general proteomics-like scheme for identifying protein-nucleic acid cross-links, and this method is equally applicable to characterizing cross-links generated from protein-DNA and protein-RNA complexes.

Identification of cross-linked peptides from large sequence databases

We describe a method to identify cross-linked peptides from complex samples and large protein sequence databases by combining isotopically tagged cross-linkers, chromatographic enrichment, targeted proteomics and a new search engine called xQuest. This software reduces the search space by an upstream candidate-peptide search before the recombination step. We showed that xQuest can identify cross-linked peptides from a total Escherichia coli lysate with an unrestricted database search.

CrossSearch, a user-friendly search engine for detecting chemically cross-linked peptides in conjugated proteins

Chemical cross-linking and high resolution MS have been integrated successfully to capture protein interactions and provide low resolution structural data for proteins that are refractive to analyses by NMR or crystallography. Despite the versatility of these combined techniques, the array of products that is generated from the cross-linking and proteolytic digestion of proteins is immense and generally requires the use of labeling strategies and/or data base search algorithms to distinguish actual cross-linked peptides from the many side products of cross-linking. Most strategies reported to date have focused on the analysis of small cross-linked protein complexes (<60 kDa) because the number of potential forms of covalently modified peptides increases dramatically with the number of peptides generated from the digestion of such complexes. We report herein the development of a user-friendly search engine, CrossSearch, that provides the foundation for an overarching strategy to detect cross-linked peptides from the digests of large (>or=170-kDa) cross-linked proteins, i.e. conjugates. Our strategy combines the use of a low excess of cross-linker, data base searching, and Fourier transform ion cyclotron resonance MS to experimentally minimize and theoretically cull the side products of cross-linking. Using this strategy, the (alpha beta gamma delta)(4) phosphorylase kinase model complex was cross-linked to form with high specificity a 170-kDa betagamma conjugate in which we identified residues involved in the intramolecular cross-linking of the 125-kDa beta subunit between its regulatory N terminus and its C terminus. This finding provides an explanation for previously published homodimeric two-hybrid interactions of the beta subunit and suggests a dynamic structural role for the regulatory N terminus of that subunit. The results offer proof of concept for the CrossSearch strategy for analyzing conjugates and are the first to reveal a tertiary structural element of either homologous alpha or beta regulatory subunit of phosphorylase kinase.

Epitope mapping on bovine prion protein using chemical cross-linking and mass spectrometry

An analytical strategy for the analysis of antigen epitopes by chemical cross-linking and mass spectrometry is demonstrated. The information of antigen peptides involved in the binding to an antibody can be obtained by monitoring the antigen peptides modified by a partially hydrolyzed cross-linker in the absence and in the presence of an antibody. This approach was shown to be efficient for characterization of the epitope on bovine prion protein bPrP(25-241) specifically recognized by a monoclonal antibody, 3E7 (mAb3E7), with only a small amount of sample (200 picomoles) needed. After cross-linking of the specific immuno complex, a matrix-assisted laser desorption/ionization (MALDI) mass spectrometer equipped with an ion conversion dynode (ICD) high-mass detector was used to optimize the amount of cross-linked complex formed at 202 kDa before proteolytic digestion. To identify the cross-linked peptides after proteolysis without ambiguity, isotope-labeled cross-linkers, disuccinimidyl suberate (DSS-d0/d12) and disuccinimidyl glutarate (DSG-d0/d6), together with high-resolution Fourier transform ion-cyclotron resonance mass spectrometry (FTICR-MS) were used. As a result, a complete fading of the peak intensities corresponding to the peptides representing the epitope was observed when bPrP/mAb3E7 complexes were formed.

Collisionally activated dissociation and electron capture dissociation of several mass spectrometry-identifiable chemical cross-linkers

One of the challenges in protein interaction studies with chemical cross-linking stems from the complexity of intra-, inter-, and dead-end cross-linked peptide mixtures. We have developed new cross-linkers to study protein-protein interactions with mass spectrometry to improve the ability to deal with this complexity. Even the accurate mass capabilities of FTICR-MS alone cannot unambiguously identify cross-linked peptides from cell-labeling experiments due to the complexity of these mixtures resultant from the enormous number of possible cross-linked species. We have developed novel cross-linkers that have unique fragmentation features in the gas phase. The characteristics of these cross-linkers combined with the accurate mass capability of FTICR-MS can help distinguish cross-linking reaction products and assign protein identities. These cross-linkers that we call protein interaction reporters (PIRs) have been constructed with two reactive groups attached through two bonds that can be preferentially cleaved by low-energy CID of the respective protonated precursor ions. After cleavage of the labile bonds, the middle part of the linker serves as a reporter ion to aid identification of cross-linked peptides. This report highlights three new PIRs with new features that have been developed to improve the efficiency of release of reporter ions. The new cross-linkers reported here were tuned with the addition of an affinity tag, a hydrophilic group, a photocleavable group, and new low-energy MS/MS cleavable bonds. This report presents our investigation of the MSMS fragmentation behavior of selected protonated ions of the new compounds. The comprehensive fragmentation of these PIRs and PIR-labeled cross-linked peptides with low-energy collisions and an example of electron capture dissociation in FTICR-MS is presented. These new cross-linkers will contribute to current systems biology research by allowing acquisition of global or large-scale data on protein-protein interactions.

Chemical cross-linking and mass spectrometry as structure determination tools

Chemical cross-linking is becoming a valuable tool for the high-order structure determination of proteins and protein complexes. Cross-linking methodology is able to provide low-resolution structures when at least something is known already about the proteins under investigation. The suitability of top-down and bottom-up methodologies is discussed and further potential applications of chemical cross-linking of proteins, as well as combinations with other techniques such as hydrogen/deuterium exchange and molecular modeling, are suggested.

Structure and dynamics of dark-state bovine rhodopsin revealed by chemical cross-linking and high-resolution mass spectrometry

Recent work using chemical cross-linking to define interresidue distance constraints in proteins has shown that these constraints are useful for testing tertiary structural models. We applied this approach to the G-protein-coupled receptor bovine rhodopsin in its native membrane using lysine- and cysteine-targeted bifunctional cross-linking reagents. Cross-linked proteolytic peptides of rhodopsin were identified by combined liquid chromatography and FT-ICR mass spectrometry with automated data-reduction and assignment software. Tandem mass spectrometry was used to verify cross-link assignments and locate the exact sites of cross-link attachment. Cross-links were observed to form between 10 pairs of residues in dark-state rhodopsin. For each pair, cross-linkers with a range of linker lengths were tested to determine an experimental distance-of-closest-approach (DCA) between reactive side-chain atoms. In all, 28 cross-links were identified using seven different cross-linking reagents. Molecular mechanics procedures were applied to published crystal structure data to calculate energetically achievable theoretical DCAs between reactive atoms without altering the position of the protein backbone. Experimentally measured DCAs are generally in good agreement with the theoretical DCAs. However, a cross-link between C316 and K325 in the C-terminal region cannot be rationalized by DCA simulations and suggests that backbone reorientation relative to the crystal coordinates occurs on the timescale of cross-linking reactions. Biochemical and spectroscopic data from other studies have found that the C-terminal region is highly mobile in solution and not fully represented by X-ray crystallography data. Our results show that chemical cross-linking can provide reliable three-dimensional structural information and insight into local conformational dynamics in a membrane protein.

Isotope-labeled cross-linkers and Fourier transform ion cyclotron resonance mass spectrometry for structural analysis of a protein/peptide complex

For structural studies of proteins and their complexes, chemical cross-linking combined with mass spectrometry presents a promising strategy to obtain structural data of protein interfaces from low quantities of proteins within a short time. We explore the use of isotope-labeled cross-linkers in combination with Fourier transform ion cyclotron resonance (FTICR) mass spectrometry for a more efficient identification of cross-linker containing species. For our studies, we chose the calcium-independent complex between calmodulin and a 25-amino acid peptide from the C-terminal region of adenylyl cyclase 8 containing an "IQ-like motif." Cross-linking reactions between calmodulin and the peptide were performed in the absence of calcium using the amine-reactive, isotope-labeled (d0 and d4) cross-linkers BS3 (bis[sulfosuccinimidyl]suberate) and BS2G (bis[sulfosuccinimidyl]glutarate). Tryptic in-gel digestion of excised gel bands from covalently cross-linked complexes resulted in complicated peptide mixtures, which were analyzed by nano-HPLC/nano-ESI-FTICR mass spectrometry. In cases where more than one reactive functional group, e.g., amine groups of lysine residues, is present in a sequence stretch, MS/MS analysis is a prerequisite for unambiguously identifying the modified residues. MS/MS experiments revealed two lysine residues in the central alpha-helix of calmodulin as well as three lysine residues both in the C-terminal and N-terminal lobes of calmodulin to be cross-linked with one single lysine residue of the adenylyl cyclase 8 peptide. Further cross-linking studies will have to be conducted to propose a structural model for the calmodulin/peptide complex, which is formed in the absence of calcium. The combination of using isotope-labeled cross-linkers, determining the accurate mass of intact cross-linked products, and verifying the amino acid sequences of cross-linked species by MS/MS presents a convenient approach that offers the perspective to obtain structural data of protein assemblies within a few days.

Chemical cross-linking and mass spectrometry to map three-dimensional protein structures and protein-protein interactions

Closely related to studying the function of a protein is the analysis of its three-dimensional structure and the identification of interaction sites with its binding partners. An alternative approach to the high-resolution methods for three-dimensional protein structure analysis, such as X-ray crystallography and NMR spectroscopy, consists of covalently connecting two functional groups of the protein(s) under investigation. The location of the created cross-links imposes a distance constraint on the location of the respective side chains and allows one to draw conclusions on the three-dimensional structure of the protein or a protein complex. Recently, chemical cross-linking of proteins has been combined with a mass spectrometric analysis of the created cross-linked products. This review article describes the most popular cross-linking reagents for protein structure analysis and gives an overview of the different available strategies that employ chemical cross-linking and different mass spectrometric techniques. The challenges for mass spectrometry caused by the enormous complexity of the cross-linking reaction mixtures are emphasized. The various approaches described in the literature to facilitate the mass spectrometric detection of cross-linked products as well as computer software for data analyses are reviewed.

Interrogation of N-Linked Oligosaccharides Using Infrared Multiphoton Dissociation in FT-ICR Mass Spectrometry

The structural elucidation of oligosaccharides remains a major challenge. Mass spectrometry provides a rapid and convenient method for structural elucidation based on tandem mass spectrometry. Ions commonly are selected and subjected to collision-induced dissociation (CID) to obtain structural information. Unfortunately, N-linked oligosaccharides are relatively large compounds and are not readily fragmented using CID. In this report, we illustrate the use of infrared multiphoton dissociation (IRMPD) to obtain structural information for large N-linked oligosaccharides. The IRMPD and CID behavior of oligosaccharides were compared for high-mannose-type oligosaccharides. Fragmentation that could not be obtained through conventional CID in Fourier transform ion cyclotron resonance mass spectrometry was observed with N-linked oligosaccharides. O-Linked and N-linked glycans of similarly large sizes were compared. It was found that internal cross-ring cleavages were observed only for N-linked oligosaccharides. The mannose branch points of N-linked oligosaccharides are apparently more susceptible to cross-ring cleavages.