An Approach for Triplex-Isobaric Peptide Termini Labeling (Triplex-IPTL)

In-Depth Characterization of Apoptosis N-terminome Reveals a Link Between Caspase-3 Cleavage and Post-Translational N-terminal Acetylation

The N-termini of proteins contain information about their biochemical properties and functions. These N-termini can be processed by proteases, and can undergo other co- or post-translational modifications. We have developed LATE (LysN Amino Terminal Enrichment), a method that uses selective chemical derivatization of α-amines to isolate the N-terminal peptides, in order to improve N-terminome identification in conjunction with other enrichment strategies. We applied LATE alongside another N-terminomic method to study caspase-3 mediated proteolysis both in vitro and during apoptosis in cells. This has enabled us to identify many unreported caspase-3 cleavages, some of which cannot be identified by other methods. Moreover, we have found direct evidence that neo-N-termini generated by caspase-3 cleavage can be further modified by Nt-acetylation. Some of these neo-Nt-acetylation events occur in the early phase of the apoptotic process and may have a role in translation inhibition. This has provided a comprehensive overview of the caspase-3 degradome and has uncovered previously unrecognized crosstalk between post-translational Nt-acetylation and caspase proteolytic pathways.

Chemical isotope labeling for quantitative proteomics

Advancements in liquid chromatography and mass spectrometry over the last decades have led to a significant development in mass spectrometry-based proteome quantification approaches. An increasingly attractive strategy is multiplex isotope labeling, which significantly improves the accuracy, precision and throughput of quantitative proteomics in the data-dependent acquisition mode. Isotope labeling-based approaches can be classified into MS1-based and MS2-based quantification. In this review, we give an overview of approaches based on chemical isotope labeling and discuss their principles, benefits, and limitations with the goal to give insights into fundamental questions and provide a useful reference for choosing a method for quantitative proteomics. As a perspective, we discuss the current possibilities and limitations of multiplex, isotope labeling approaches for the data-independent acquisition mode, which is increasing in popularity.

A1 Ions: Peptide-Specific and Intensity-Enhanced Fragment Ions for Accurate and Multiplexed Proteome Quantitation

Accurate proteome quantitation is of great significance to deeply understand various cellular and physiological processes. Since a1 ions, generated from dimethyl-labeled peptides, exhibited high formation efficiency (up to 99%) and enhanced intensities (2.34-fold by average) in tandem mass spectra, herein, we proposed an a1 ion-based proteome quantitation (APQ) method, which showed high quantitation accuracy (relative errors < 7%) and precision (median coefficients of variation ≤ 11%) even in a 20-fold dynamic range. Notably, due to the mass differences of a1 ions from peptides with different N-terminal amino acids, APQ demonstrated interference-free capacity by distinguishing target peptides from the coisolated ones. By designing an isobaric dimethyl labeling strategy, we achieved simultaneous proteome-wide measurements across up to eight samples. Using APQ to quantify the time-resolved proteomic profiles during a TGF-β-induced epithelial-mesenchymal transition, we found many differentially expressed proteins associated with fatty acid degradation, indicating that fatty acid metabolism reprogramming occurred during the process. The APQ method combines high quantitation accuracy with multiplexing capacity, which is suitable for deep mining and understanding of dynamic biological processes.

Comparison of LFQ and IPTL for Protein Identification and Relative Quantification

(1) Background: Mass spectrometry-based quantitative proteome profiling is most commonly performed by label-free quantification (LFQ), stable isotopic labeling with amino acids in cell culture (SILAC), and reporter ion-based isobaric labeling methods (TMT and iTRAQ). Isobaric peptide termini labeling (IPTL) was described as an alternative to these methods and is based on crosswise labeling of both peptide termini and MS2 quantification. High quantification accuracy was assumed for IPTL because multiple quantification points are obtained per identified MS2 spectrum. A direct comparison of IPTL with other quantification methods has not been performed yet because IPTL commonly requires digestion with endoproteinase Lys-C. (2) Methods: To enable tryptic digestion of IPTL samples, a novel labeling for IPTL was developed that combines metabolic labeling (Arg-0/Lys-0 and Arg-d4/Lys-d4, respectively) with crosswise N-terminal dimethylation (d4 and d0, respectively). (3) Results: The comparison of IPTL with LFQ revealed significantly more protein identifications for LFQ above homology ion scores but not above identity ion scores. (4) Conclusions: The quantification accuracy was superior for LFQ despite the many quantification points obtained with IPTL.

An Approach for Triplex-IPTL

Isobaric peptide termini labeling (IPTL) is an approach for quantitative proteomics based on crosswise isotopic labeling of peptides at the N- and C-terminus. The labeling reagents are chosen in isotopic variations that the resulting mass of all labels per peptide is isobaric, but the individual label on each peptide terminus is different. Therefore, the quantitative difference of the peptide signal can be determined by the fragment ions of the corresponding MS2 spectra. Here, we describe an approach for triplex-IPTL to allow the comparison of three proteomes. This approach is based on digestion of the proteins by endoproteinase Lys-C, followed by three combinations of selective dimethylation of the peptide N-termini and subsequent dimethylation of the lysine residues at the C-termini. Data analysis is performed using Mascot for database searches and the freely available software package IsobariQ for quantification.

Quantitative Mass Spectrometry-Based Proteomics: An Overview

In recent decades, mass spectrometry has moved more than ever before into the front line of protein-centered research. After being established at the qualitative level, the more challenging question of quantification of proteins and peptides using mass spectrometry has become a focus for further development. In this chapter, we discuss and review actual strategies and problems of the methods for the quantitative analysis of peptides, proteins, and finally proteomes by mass spectrometry. The common themes, the differences, and the potential pitfalls of the main approaches are presented in order to provide a survey of the emerging field of quantitative, mass spectrometry-based proteomics.

A Versatile Isobaric Tag Enables Proteome Quantification in Data-Dependent and Data-Independent Acquisition Modes

Quantifying proteins based on peptide-coupled reporter ions is a multiplexed quantitative strategy in proteomics that alleviates the problem of ratio distortion caused by peptide cofragmentation, as commonly observed in other reporter-ion-based approaches, such as TMT and iTRAQ. Data-independent acquisition (DIA) is an attractive alternative to data-dependent acquisition (DDA) due to its better reproducibility. While multiplexed labeling is widely used in DDA, it is rarely used in DIA, presumably because current approaches lead to more complex MS2 spectra, severe ratio distortion, or to a reduction in quantification accuracy and precision. Herein, we present a versatile acetyl-alanine-glycine (Ac-AG) tag that conceals quantitative information in isobarically labeled peptides and reveals it upon tandem MS in the form of peptide-coupled reporter ions. Since the peptide-coupled reporter ion is precursor-specific while fragment ions of the peptide backbone originating from different labeling channels are identical, the Ac-AG tag is compatible with both DDA and DIA. By isolating the monoisotopic peak of the precursor ion in DDA, intensities of the peptide-coupled reporter ions represent the relative ratios between constituent samples, whereas in DIA, the ratio can be inferred after deconvoluting the peptide-coupled reporter ion isotopes. The proteome quantification capability of the Ac-AG tag was demonstrated by triplex labeling of a yeast proteome spiked with bovine serum albumin (BSA) over a 10-fold dynamic range. Within this complex proteomics background, BSA spiked at 1:5:10 ratios was detected at ratios of 1.00:4.87:10.13 in DDA and 1.16:5.20:9.64 in DIA.

Electroosmotic Perfusion-Microdialysis Probe Created by Direct Laser Writing for Quantitative Assessment of Leucine Enkephalin Hydrolysis by Insulin-Regulated Aminopeptidase in Vivo

There are many processes that actively alter the concentrations of solutes in the extracellular space. Enzymatic reactions, either by soluble enzymes or membrane-bound ectoenzymes, and uptake or clearance are two such processes. Investigations of ectoenzymatic reactions in vivo is challenging, particularly in the brain. Studies using microdialysis have revealed some qualitative information about what enzymes may be present, but microdialysis is a sampling technique so it is not designed to control conditions such as a substrate concentration outside the probe. Micropush-pull perfusion has been used to determine which nitric oxide synthase enzymes are active in discrete regions of the rat retina. Ectopeptidases are a particularly important class of ectoenzymes. As far as it is known, the extracellular activity of active peptides in the brain is controlled by ectopeptidases. To understand ectopeptidase activity, we developed a physical probe and an accompanying method. The probe has a two-channel source that supplies substrate or substrate plus inhibitor using electroosmotic perfusion (EOP). It also has a microdialysis probe to collect products and unreacted substrate. The method provides quantitative estimates of substrate-to-product conversion and the influence of inhibitors on this process. The quantitative estimates are made possible by including a d-amino acid-containing peptide analog of the substrate in the substrate-containing solution infused. Quantitative analysis of substrate, substrate analog, and products is carried out by quantitative, online capillary liquid chromatography-tandem mass spectrometry. The electroosmotic perfusion-microdialysis probe and associated method were used to determine the effect of the selective inhibitor HFI-419 on insulin-regulated aminopeptidase (EC 3.4.11.3) in the rat neocortex.

A Collision-Induced Dissociation Cleavable Isobaric Tag for Peptide Fragment Ion-Based Quantification in Proteomics

Quantifying peptides based on unique peptide fragment ions avoids the issue of ratio distortion that is commonly observed for reporter ion-based quantification approaches. Herein, we present a collision-induced dissociation-cleavable, isobaric acetyl-isoleucine-proline-glycine (Ac-IPG) tag, which conserves the merits of quantifying peptides based on unique fragments while reducing the complexity of the b-ion series compared to conventional fragment ion-based quantification methods thus facilitating data processing. Multiplex labeling is based on selective N-terminal dimethylation followed by derivatization of the ε-amino group of the C-terminal Lys residue of LysC peptides with isobaric Ac-IPG tags having complementary isotope distributions on Pro-Gly and Ac-Ile. Upon fragmentation between Ile and Pro, the resulting y ions, with the neutral loss of Ac-Ile, can be distinguished between the different labeling channels based on different numbers of isotope labels on the Pro-Gly part and thus contain the information for relative quantification, while b ions of different labeling channels have the same m/z values. The proteome quantification capability of this method was demonstrated by triplex labeling of a yeast proteome spiked with bovine serum albumin (BSA) over a 10-fold dynamic range. With the yeast proteins as the background, BSA was detected at ratios of 1.14:5.06:9.78 when spiked at 1:5:10 ratios. The raw mass data is available on the ProteomeXchange with the identifier PXD 018790.

Selective Maleylation-Directed Isobaric Peptide Termini Labeling for Accurate Proteome Quantification

Isobaric peptide termini labeling (IPTL) is an attractive protein quantification method because it provides more accurate and reliable quantification information than traditional isobaric labeling methods (e.g., TMT and iTRAQ) by making use of the entire fragment-ion series instead of only a single reporter ion. The multiplexing capacity of published IPTL implementations is, however, limited to three. Here, we present a selective maleylation-directed isobaric peptide termini labeling (SMD-IPTL) approach for quantitative proteomics of LysC protein digestion. SMD-IPTL extends the multiplexing capacity to 4-plex with the potential for higher levels of multiplexing using commercially available ¹³C/¹⁵N labeled amino acids. SMD-IPTL is achieved in a one-pot reaction in three consecutive steps: (1) selective maleylation at the N-terminus; (2) labeling at the ε-NH₂ group of the C-terminal Lys with isotopically labeled acetyl-alanine; (3) thiol Michael addition of an isotopically labeled acetyl-cysteine at the maleylated N-terminus. The isobarically labeled peptides are fragmented into sets of b- and y-ion clusters upon LC-MS/MS, which convey not only sequence information but also quantitative information for every labeling channel and avoid the issue of ratio distortion observed with reporter-ion-based approaches. We demonstrate the SMD-IPTL approach with a 4-plex labeled sample of bovine serum albumin (BSA) and yeast lysates mixed at different ratios. With the use of SMD-IPTL for labeling and a narrow precursor isolation window of 0.8 Th with an offset of −0.2 Th, accurate ratios were measured across a 10-fold mixing range of BSA in a background of yeast proteome. With the yeast proteins mixed at ratios of 1:5:1:5, BSA was detected at ratios of 0.94:2.46:4.70:9.92 when spiked at 1:2:5:10 ratios with an average standard deviation of peptide ratios of 0.34.

Proteomics: a powerful tool to study plant responses to biotic stress

In recent years, mass spectrometry-based proteomics has provided scientists with the tremendous capability to study plants more precisely than previously possible. Currently, proteomics has been transformed from an isolated field into a comprehensive tool for biological research that can be used to explain biological functions. Several studies have successfully used the power of proteomics as a discovery tool to uncover plant resistance mechanisms. There is growing evidence that indicates that the spatial proteome and post-translational modifications (PTMs) of proteins directly participate in the plant immune response. Therefore, understanding the subcellular localization and PTMs of proteins is crucial for a comprehensive understanding of plant responses to biotic stress. In this review, we discuss current approaches to plant proteomics that use mass spectrometry, with particular emphasis on the application of spatial proteomics and PTMs. The purpose of this paper is to investigate the current status of the field, discuss recent research challenges, and encourage the application of proteomics techniques to further research.

A Multiplex Fragment-Ion-Based Method for Accurate Proteome Quantification

Multiplex proteome quantification with high accuracy is urgently required to achieve a comprehensive understanding of dynamic cellular and physiological processes. Among the existing quantification strategies, fragment-ion-based methods can provide highly accurate results, but the multiplex capacity is limited to 3-plex. Herein, we developed a multiplex pseudo-isobaric dimethyl labeling (m-pIDL) method to extend the capacity of the fragment-ion-based method to 6-plex by one-step dimethyl labeling with several millidalton and dalton mass differences between precursor ions and enlarging the isolation window of precursor ions to 10 m/ z during data acquisition. m-pIDL showed high quantification accuracy within the 20-fold dynamic range. Notably, the ratio compression was 1.13-fold in a benchmark two-proteome model (5:1 mixed E. coli proteins with HeLa proteins as interference), indicating that by m-pIDL, the ratio distortion of isobaric labeling approaches and the approximate 40% ratio shift of the label-free quantification strategy could be effectively eliminated. Additionally, m-pIDL did not show ratio variation among post-translational modifications (CV = 6.66%), which could benefit the measurement of universal protein properties for proteomic atlases. We further employed m-pIDL to monitor the time-resolved responses of the TGF-β-induced epithelial-mesenchymal transition (EMT) in lung adenocarcinoma A549 cell lines, which facilitated the finding of new potential regulatory proteins. Therefore, the 6-plex quantification of m-pIDL with the remarkably high accuracy might create new prospects for comprehensive proteome analysis.

Relative and Absolute Quantitation in Mass Spectrometry-Based Proteomics

Mass spectrometry-based quantitative proteomics is a powerful tool for gaining insights into function and dynamics of biological systems. However, peptides with different sequences have different ionization efficiencies, and their intensities in a mass spectrum are not correlated with their abundances. Therefore, various label-free or stable isotope label-based quantitation methods have emerged to assist mass spectrometry to perform comparative proteomic experiments, thus enabling nonbiased identification of thousands of proteins differentially expressed in healthy versus diseased cells. Here, we discuss the most widely used label-free and metabolic-, enzymatic-, and chemical labeling-based proteomic strategies for relative and absolute quantitation. We summarize the specific strengths and weaknesses of each technique in terms of quantification accuracy, proteome coverage, multiplexing capability, and robustness. Applications of each strategy for solving specific biological complexities are also presented.

Absolute two-point quantification of proteins using dimethylated proteotypic peptides

For absolute quantification of target proteins by LC-MS, adding two versions of spike-in peptides can be used as a quality control against each other.

A novel triplex isobaric termini labeling quantitative approach for simultaneously supplying three quantitative sources

Benefiting from high sensitivity and great ability to measure multiple samples simultaneously, isobaric tandem Mass spectrometry (MS2) quantification has been widely applied for protein biomarker screening. Here, a newly developed isobaric MS2 quantification method named triplex quantification by isobaric termini labeling (Triplex-QITL) was established. This method enables the accurate comparison of various fragment ions (reporter ions, amino acid fragments and N-/C-terminal fragments) based quantification to be operated in a single run. To our knowledge, this is the first time that this kind of comparison is achieved. In Triplex-QITL, proteins were first digested with Lys-C to produce peptides with lysine (K) at the C-termini, then dimethylation reagents and mTRAQ reagents were used to label the N-termini and C-termini of the peptides respectively. N- and C-terminal fragment ion pairs, reporter ions from mTRAQ (113,117,121) and a₁ ion pairs were simultaneously generated in MS2 spectra. In simple sample experiment, not much difference in using various fragment ions for quantification was observed. When analyzing SW480 cell lysate, comparing with a1 ions, about two times of reproducible quantification results were achieved by reporter ions and N- and C-terminal ions. Meanwhile the measured quantification results were much closer to the expected results even in large ratios (1:10:10) using N- and C-terminal ions. Finally, Triplex-QITL was successfully applied to profile metastatic differences of three hepatocellular carcinoma (HCC) cell lines. In all, Triplex-QITL shows a promising future in quantitative proteomics.

Enhanced Sample Multiplexing of Tissues Using Combined Precursor Isotopic Labeling and Isobaric Tagging (cPILOT)

There is an increasing demand to analyze many biological samples for disease understanding and biomarker discovery. Quantitative proteomics strategies that allow simultaneous measurement of multiple samples have become widespread and greatly reduce experimental costs and times. Our laboratory developed a technique called combined precursor isotopic labeling and isobaric tagging (cPILOT), which enhances sample multiplexing of traditional isotopic labeling or isobaric tagging approaches. Global cPILOT can be applied to samples originating from cells, tissues, bodily fluids, or whole organisms and gives information on relative protein abundances across different sample conditions. cPILOT works by 1) using low pH buffer conditions to selectively dimethylate peptide N-termini and 2) using high pH buffer conditions to label primary amines of lysine residues with commercially-available isobaric reagents (see Table of Materials/Reagents). The degree of sample multiplexing available is dependent on the number of precursor labels used and the isobaric tagging reagent. Here, we present a 12-plex analysis using light and heavy dimethylation combined with six-plex isobaric reagents to analyze 12 samples from mouse tissues in a single analysis. Enhanced multiplexing is helpful for reducing experimental time and cost and more importantly, allowing comparison across many sample conditions (biological replicates, disease stage, drug treatments, genotypes, or longitudinal time-points) with less experimental bias and error. In this work, the global cPILOT approach is used to analyze brain, heart, and liver tissues across biological replicates from an Alzheimer's disease mouse model and wild-type controls. Global cPILOT can be applied to study other biological processes and adapted to increase sample multiplexing to greater than 20 samples.

Deciphering lymphoma pathogenesis via state-of-the-art mass spectrometry-based quantitative proteomics

Mass spectrometry-based quantitative proteomics specifically applied to comprehend the pathogenesis of lymphoma has incremental value in deciphering the heterogeneity in complex deregulated molecular mechanisms/pathways of the lymphoma entities, implementing the current diagnostic and therapeutic strategies. Essential global, targeted and functional differential proteomics analyses although still evolving, have been successfully implemented to shed light on lymphoma pathogenesis to discover and explore the role of potential lymphoma biomarkers and drug targets. This review aims to outline and appraise the present status of MS-based quantitative proteomic approaches in lymphoma research, introducing the current state-of-the-art MS-based proteomic technologies, the opportunities they offer in biological discovery in human lymphomas and the related limitation issues arising from sample preparation to data evaluation. It is a synopsis containing information obtained from recent research articles, reviews and public proteomics repositories (PRIDE). We hope that this review article will aid, assimilate and assess all the information aiming to accelerate the development and validation of diagnostic, prognostic or therapeutic targets for an improved and empowered clinical proteomics application in lymphomas in the nearby future.

Intact Protein Quantitation Using Pseudoisobaric Dimethyl Labeling

Protein structural and functional studies rely on complete qualitative and quantitative information on protein species (proteoforms); thus, it is important to quantify differentially expressed proteins at their molecular level. Here we report our development of universal pseudoisobaric dimethyl labeling (pIDL) of amino groups at both the N-terminal and lysine residues for relative quantitation of intact proteins. Initial proof-of-principle study was conducted on standard protein myoglobin and hepatocellular proteomes (HepG2 vs LO2). The amino groups from both the N-terminal and lysine were dimethylated with HXHO (X = (13)C or C) and NaBY3CN (Y = H or D). At the standard protein level, labeling efficiency, effect of product ion size, and mass resolution on quantitation accuracy were explored; and a good linear quantitation dynamic range up to 50-fold was obtained. For the hepatocellular proteome samples, 33 proteins were quantified with RSD ≤ 10% from one-dimensional reversed phase liquid chromatography-tandem mass spectrometry (RPLC-MS/MS) analysis of the 1:1 mixed samples. The method in this study can be extended to quantitation of other intact proteome systems. The universal "one-pot" dimethyl labeling of all the amino groups in a protein without the need of preblocking of those on the lysine residues is made possible by protein identification and quantitation analysis using ProteinGoggle 2.0 with customized databases of both precursor and product ions containing heavy isotopes.

Using the fluorescent properties of STO-609 as a tool to assist structure-function analyses of recombinant CaMKK2

Calcium/calmodulin-dependent kinase kinase 2 (CaMKK2) has been implicated in the regulation of metabolic activity in cancer and immune cells, and affects whole-body metabolism by regulating ghrelin-signalling in the hypothalamus. This has led to efforts to develop specific CaMKK2 inhibitors, and STO-609 is the standardly used CaMKK2 inhibitor to date. We have developed a novel fluorescence-based assay by exploiting the intrinsic fluorescence properties of STO-609. Here, we report an in vitro binding constant of KD ∼17 nM between STO-609 and purified CaMKK2 or CaMKK2:Calmodulin complex. Whereas high concentrations of ATP were able to displace STO-609 from the kinase, GTP was unable to achieve this confirming the specificity of this association. Recent structural studies on the kinase domain of CaMKK2 had implicated a number of amino acids involved in the binding of STO-609. Our fluorescent assay enabled us to confirm that Phe(267) is critically important for this association since mutation of this residue to a glycine abolished the binding of STO-609. An ATP replacement assay, as well as the mutation of the 'gatekeeper' amino acid Phe(267)Gly, confirmed the specificity of the assay and once more confirmed the strong binding of STO-609 to the kinase. In further characterising the purified kinase and kinase-calmodulin complex we identified a number of phosphorylation sites some of which corroborated previously reported CaMKK2 phosphorylation and some of which, particularly in the activation segment, were novel phosphorylation events. In conclusion, the intrinsic fluorescent properties of STO-609 provide a great opportunity to utilise this drug to label the ATP-binding pocket and probe the impact of mutations and other regulatory modifications and interactions on the pocket. It is however clear that the number of phosphorylation sites on CaMKK2 will pose a challenge in studying the impact of phosphorylation on the pocket unless the field can develop approaches to control the spectrum of modifications that occur during recombinant protein expression in Escherichia coli.

Pseudo isobaric peptide termini labelling for relative proteome quantification by SWATH MS acquisition

The SWATH-pseudo-IPTL method is a promising strategy in quantitative proteomics, and has been efficiently applied in biological studies due to its high quantitative accuracy.

ITMSQ: A software tool for N- and C-terminal fragment ion pairs based isobaric tandem mass spectrometry quantification

Tandem MS (MS2) quantification using the series of N- and C-terminal fragment ion pairs generated from isobaric-labelled peptides was recently considered an accurate strategy in quantitative proteomics. However, the presence of multiplexed terminal fragment ion in MS2 spectra may reduce the efficiency of peptide identification, resulting in lower identification scores or even incorrect assignments. To address this issue, we developed a quantitative software tool, denoted isobaric tandem MS quantification (ITMSQ), to improve N- and C-terminal fragment ion pairs based isobaric MS2 quantification. A spectrum splitting module was designed to separate the MS2 spectra from different samples, increasing the accuracy of both identification and quantification. ITMSQ offers a convenient interface through which parameters can be changed along with the labelling method, and the result files and all of the intermediate files can be exported. We performed an analysis of in vivo terminal amino acid labelling labelled HeLa samples and found that the numbers of quantified proteins and peptides increased by 13.64 and 27.52% after spectrum splitting, respectively. In conclusion, ITMSQ provides an accurate and reliable quantitative solution for N- and C-terminal fragment ion pairs based isobaric MS2 quantitative methods.

The impact of carbon-13 and deuterium on relative quantification of proteins using stable isotope diethyl labeling

RATIONALE

Stable isotopic labeling techniques are useful for quantitative proteomics. A cost-effective and convenient method for diethylation by reductive amination was established. The impact using either carbon-13 or deuterium on quantification accuracy and precision was investigated using diethylation.

METHODS

We established an effective approach for stable isotope labeling by diethylation of amino groups of peptides. The approach was validated using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) and nanospray liquid chromatography/electrospray ionization (nanoLC/ESI)-ion trap/orbitrap for mass spectrometric analysis as well as MaxQuant for quantitative data analysis.

RESULTS

Reaction conditions with low reagent costs, high yields and minor side reactions were established for diethylation. Furthermore, we showed that diethylation can be applied to up to sixplex labeling. For duplex experiments, we compared diethylation in the analysis of the proteome of HeLa cells using acetaldehyde-(13) C(2)/(12) C(2) and acetaldehyde-(2) H(4)/(1) H(4). Equal numbers of proteins could be identified and quantified; however, (13) C(4)/(12) C(4) -diethylation revealed a lower variance of quantitative peptide ratios within proteins resulting in a higher precision of quantified proteins and less falsely regulated proteins. The results were compared with dimethylation showing minor effects because of the lower number of deuteriums.

CONCLUSIONS

The described approach for diethylation of primary amines is a cost-effective and accurate method for up to sixplex relative quantification of proteomes. (13) C(4)/(12) C(4) -diethylation enables duplex quantification based on chemical labeling without using deuterium which reduces identification of false-negatives and increases the quality of the quantification results.

Global cPILOT analysis of the APP/PS-1 mouse liver proteome

PURPOSE

A quantitative proteomics strategy called combined precursor isotopic labeling and isobaric tagging (cPILOT) was designed to discover alterations in the amyloid precursor protein/presenilin-1 (APP/PS-1) mouse liver proteome. The multiplexing strategy allows simultaneous quantitation of 12 samples in a single experiment.

EXPERIMENTAL DESIGN

For cPILOT samples, six APP/PS-1 and six heterozygous mouse livers were modified using precursor dimethylation (pH 2.5) followed by isobaric tagging (pH 8.0). Samples were pooled, fractioned with strong cation exchange, and analyzed using RPLC-MS(3) for protein identification and relative quantitation. In order to increase proteome coverage, a two-tiered data collection strategy was employed. Six duplex precursor dimethylation experiments were also performed to verify cPILOT protein quantitation.

RESULTS

The combination of cPILOT with precursor dimethylation data resulted in 2437 total liver proteins identified and 77 differentially expressed proteins in APP/PS-1 liver. Differentially expressed proteins are involved in metabolic processes such as B-oxidation, pyruvate metabolism, and glucose regulation.

CONCLUSIONS AND CLINICAL RELEVANCE

cPILOT expands protein quantitation using isobaric tags and can be applied to any clinical laboratory interested in enhanced multiplexing strategies. Differentially expressed proteins in APP/PS-1 mouse liver suggest the potential use of ketone bodies to alleviate metabolic dysregulation in Alzheimer's disease brain. Our work also suggests alterations in the alanine cycle potentially leading to hyperammonia production, may contribute to Alzheimer's disease pathogenesis.

Stable isotope labelling methods in mass spectrometry-based quantitative proteomics

Mass-spectrometry based proteomics has evolved as a promising technology over the last decade and is undergoing a dramatic development in a number of different areas, such as; mass spectrometric instrumentation, peptide identification algorithms and bioinformatic computational data analysis. The improved methodology allows quantitative measurement of relative or absolute protein amounts, which is essential for gaining insights into their functions and dynamics in biological systems. Several different strategies involving stable isotopes label (ICAT, ICPL, IDBEST, iTRAQ, TMT, IPTL, SILAC), label-free statistical assessment approaches (MRM, SWATH) and absolute quantification methods (AQUA) are possible, each having specific strengths and weaknesses. Inductively coupled plasma mass spectrometry (ICP-MS), which is still widely recognised as elemental detector, has recently emerged as a complementary technique to the previous methods. The new application area for ICP-MS is targeting the fast growing field of proteomics related research, allowing absolute protein quantification using suitable elemental based tags. This document describes the different stable isotope labelling methods which incorporate metabolic labelling in live cells, ICP-MS based detection and post-harvest chemical label tagging for protein quantification, in addition to summarising their pros and cons.

Peptide dimethylation: fragmentation control via distancing the dimethylamino group

Direct reductive methylation of peptides is a common method for quantitative proteomics. It is an active derivatization technique; with participation of the dimethylamino group, the derivatized peptides preferentially release intense a1 ions. The advantageous generation of a1 ions for quantitative proteomic profiling, however, is not desirable for targeted proteomic quantitation using multiple reaction monitoring mass spectrometry; this mass spectrometric method prefers the derivatizing group to stay with the intact peptide ions and multiple fragments as passive mass tags. This work investigated collisional fragmentation of peptides whose amine groups were derivatized with five linear ω-dimethylamino acids, from 2-(dimethylamino)-acetic acid to 6-(dimethylamino)-hexanoic acid. Tandem mass spectra of the derivatized tryptic peptides revealed different preferential breakdown pathways. Together with energy resolved mass spectrometry, it was found that shutting down the active participation of the terminal dimethylamino group in fragmentation of derivatized peptides is possible. However, it took a separation of five methylene groups between the terminal dimethylamino group and the amide formed upon peptide derivatization. For the first time, the gas-phase fragmentation of peptides derivatized with linear ω-dimethylamino acids of systematically increasing alkyl chain lengths is reported.

Recent advances in stable isotope labeling based techniques for proteome relative quantification

The large scale relative quantification of all proteins expressed in biological samples under different states is of great importance for discovering proteins with important biological functions, as well as screening disease related biomarkers and drug targets. Therefore, the accurate quantification of proteins at proteome level has become one of the key issues in protein science. Herein, the recent advances in stable isotope labeling based techniques for proteome relative quantification were reviewed, from the aspects of metabolic labeling, chemical labeling and enzyme-catalyzed labeling. Furthermore, the future research direction in this field was prospected.

Interference-free proteome quantification with MS/MS-based isobaric isotopologue detection

Chemical labeling of peptides prior to shotgun proteomics allows relative quantification of proteins in biological samples independent of sample origin. Current strategies utilize isobaric labels that fragment into reporter ions. However, quantification of reporter ions results in distorted ratio measurements due to contaminating peptides that are co-selected in the same precursor isolation window. Here, we show that quantitation of isobaric peptide fragment isotopologues in tandem mass spectra reduces precursor interference. The method is based on the relative quantitation of isobaric isotopologues of dimethylated peptide fragments in tandem mass spectra following higher energy collisional dissociation (HCD). The approach enables precise quantification of a proteome down to single spectra per protein and quantifies >90% of proteins in a MudPIT experiment and accurately measures proteins in a model cell line for cystic fibrosis.

Mass defect-based pseudo-isobaric dimethyl labeling for proteome quantification

Discovering differentially expressed proteins in various biological samples requires proteome quantification methods with accuracy, precision, and wide dynamic range. This study describes a mass defect-based pseudo-isobaric dimethyl labeling (pIDL) method based on the subtle mass defect differences between (12)C/(13)C and (1)H/(2)H. Lys-C protein digests were labeled with CD2O/(13)CD2O and reduced with NaCNBD3/NaCNBH3 as heavy and light isotopologues, respectively. The fragment ion pairs with mass differences of 5.84 mDa were resolved by high-resolution tandem mass spectrometry (MS/MS) and used for quantification. The pIDL method described here resulted in highly accurate and precise quantification results with approximately 100-fold dynamic range. Furthermore, the pIDL method was extended to 4-plex proteome quantification and applied to the quantitative analysis of proteomes from Hca-P and Hca-F, two mouse hepatocarcinoma ascites syngeneic cell lines with low and high lymph node metastasis rates.

Global combined precursor isotopic labeling and isobaric tagging (cPILOT) approach with selective MS(3) acquisition

Recently, we reported a novel proteomics quantitation scheme termed "combined precursor isotopic labeling and isobaric tagging (cPILOT)" that allows for the identification and quantitation of nitrated peptides in as many as 12-16 samples in a single experiment. cPILOT offers enhanced multiplexing and posttranslational modification specificity, however excludes global quantitation for all peptides present in a mixture and underestimates reporter ion ratios similar to other isobaric tagging methods due to precursor co-isolation. Here, we present a novel chemical workflow for cPILOT that can be used for global tagging of all peptides in a mixture. Specifically, through low pH precursor dimethylation of tryptic or LysC peptides followed by high pH tandem mass tags, the same reporter ion can be used twice in a single experiment. Also, to improve triple-stage mass spectrometry (MS(3) ) data acquisition, a selective MS(3) method that focuses on product selection of the y1 fragment of lysine-terminated peptides is incorporated into the workflow. This novel cPILOT workflow has potential for global peptide quantitation that could lead to enhanced sample multiplexing and increase the number of quantifiable spectra obtained from MS(3) acquisition methods.

Discovery of undefined protein cross-linking chemistry: a comprehensive methodology utilizing 18O-labeling and mass spectrometry

Characterization of protein cross-linking, particularly without prior knowledge of the chemical nature and site of cross-linking, poses a significant challenge, because of their intrinsic structural complexity and the lack of a comprehensive analytical approach. Toward this end, we have developed a generally applicable workflow-XChem-Finder-that involves four stages: (1) detection of cross-linked peptides via (18)O-labeling at C-termini; (2) determination of the putative partial sequences of each cross-linked peptide pair using a fragment ion mass database search against known protein sequences coupled with a de novo sequence tag search; (3) extension to full sequences based on protease specificity, the unique combination of mass, and other constraints; and (4) deduction of cross-linking chemistry and site. The mass difference between the sum of two putative full-length peptides and the cross-linked peptide provides the formulas (elemental composition analysis) for the functional groups involved in each cross-linking. Combined with sequence restraint from MS/MS data, plausible cross-linking chemistry and site were inferred, and ultimately confirmed, by matching with all data. Applying our approach to a stressed IgG2 antibody, 10 cross-linked peptides were discovered and found to be connected via thioethers originating from disulfides at locations that had not been previously recognized. Furthermore, once the cross-link chemistry was revealed, a targeted cross-link search yielded 4 additional cross-linked peptides that all contain the C-terminus of the light chain.