High-Density Protein Loading on Hierarchically Porous Layered Double Hydroxide Composites with a Rational Mesostructure

Layered assembly of PEGylated graphene oxide and Mg-Al layered double hydroxide nanosheets with superior adsorption capacity and selective isolation of hemoglobin

This study developed a novel organic-inorganic hybrid composite, shortly as GO-PEG-LDHs, by self-assembly of exfoliated Mg-Al layer double hydroxide (LDHs) on the polyethylene glycol (PEG) grafted graphene oxide (GO) to achieve the selective adsorption of hemoglobin (Hb). The prepared GO-PEG-LDHs has a hierarchical structure with a homogeneous loading of exfoliated LDHs nano-sheets on its surface. The adsorption test reveals that GO-PEG-LDHs exhibits an adsorption efficiency of 95.03% for Hb and 3.45% for bovine serum albumin (BSA). The adsorption of Hb follows the Langmuir model, with an ultrahigh adsorption capacity of 55248.6 mg/g, which is higher than any previously reported materials. Meanwhile, the adsorbed Hb can be efficiently recovered through elution with a 50 mM Tris-HCl buffer, with an elution efficiency of 80.77%. Circular dichroism (CD) spectra indicate no conformational change for Hb during the process of adsorption/desorption. Furthermore, the composite demonstrates the ability to selectively isolate Hb in the presence of interfering protein BSA, indicating its potential for practical applications.

Ion exchange fabrication of lanthanide functionalized layered double hydroxides microcapsules for rapid and visual detection of anthrax biomarker

Lanthanide ion probes have recently been considered as promising sensing materials due to their high sensitivity and good optical properties. Herein, the 3D hierarchical lanthanide functionalized layered double hydroxides microcapsules were synthesized via a facile ion exchange strategy and further developed as novel fluorescent probes for detecting trace amounts of the anthrax biomarker dipicolinicacid (DPA). Benefiting from the 3D porous superstructure and abundant unsaturated coordination sites of lanthanide ion, the ternary Ni-Fe-Ln-LDHs (Ln = Tb/Eu) not only possess a large reactive contact area to improve the sensitivity of DPA detection, but also demonstrate very fast reaction rate. The design of inexpensive fluorescent test strips can perform the on-site and real-time detection via a smartphone with a color recognition application. More prominently, the sensitivity of the system was evaluated by actual spore samples with the detection limit as low as 3.54 × 10⁴ spores/mL. The 3D lanthanide functionalized LDHs nanoprobe constructed by ion exchange exhibits a new vision for the development of a sensing platform in other research areas.

Effect of pH, ionic strength, and temperature on the adsorption behavior of Acid Blue 113 onto mesoporous carbon

Mesoporous carbon (MC) derived from cassava starch was used to remove Acid Blue 113 azo dye from aqueous solutions. The influence of temperature, pH, ionic strength, and the adsorbent dose was investigated in a set of batch experiments. Experimental data showed that Acid Blue 113 adsorption was higher in the acid pH range than in the alkaline one, that dye adsorption increases when the ionic strength and temperature increase, and that adsorption results presented a good correlation with the Langmuir isotherm model. The adsorption capacity of MC was 295 mg g^-1, at pH = 7.0 and 298 K, respectively. Zeta potential (ζ) showed the compression of the diffuse double layer of adsorbent with an increase in temperature and ionic strength, promoting the decrease of electrostatic repulsion between the negatively charged surface of the carbon particles and the anionic dye. Thermodynamic results demonstrate that the adsorption process was spontaneous and endothermic. Moreover, for the first time, this work has demonstrated that the pH, temperature, and ionic strength of the aqueous medium are also able to change the surface charge of carbon-based adsorbents and surely influence the adsorption capacity. Finally, the regeneration of the adsorbent by the photo-Fenton reaction regenerated the adsorption capacity of the adsorbent without generating secondary pollution to the environment.

Facile fabrication of hierarchically nanostructured gold electrode for bio-electrochemical applications

Nanoporous gold (NPG) is one of the most extensively investigated nanomaterials owing to its tunable pore size, ease of surface modification, and range of applications from catalysis, actuation, and molecular release to the development of electrochemical sensors. In an effort to improve the usefulness of NPG, a simple and robust method for the fabrication of hierarchical and bimodal nanoporous gold electrodes (hb-NPG) containing both macro-and mesopores is reported using electrochemical alloying and dealloying processes to engineer a bicontinuous solid/void morphology. Scanning electron microscopy (color SEM) images depict the hierarchical pore structure created after the multistep synthesis with an ensemble of tiny pores below 100 nm in size located in ligaments spanning larger pores of several hundred nanometers. Smaller-sized pores are exploited for surface modification, and the network of larger pores aids in molecular transport. Cyclic voltammetry (CV) was used to compare the electrochemically active surface area of the hierarchical bimodal structure with that of the regular unimodal NPG with an emphasis on the critical role of both dealloying and annealing in creating the desired structure. The adsorption of different proteins was followed using UV-vis absorbance measurements of solution depletion revealing the high loading capacity of hb-NPG. The surface coverage of lipoic acid on the hb-NPG was analyzed using thermogravimetric analysis (TGA) and reductive desorption. The roughness factor determinations suggest that the fabricated hb-NPG electrode has tremendous potential for biosensor development by changing the scaling relations between volume and surface area which may lead to improved analytical performance. We have chosen to take advantage of the surface architectures of hb-NPG due to the presence of a large specific surface area for functionalization and rapid transport pathways for faster response. It is shown that the hb-NPG electrode has a higher sensitivity for the amperometric detection of glucose than does an NPG electrode of the same geometric surface area.

Layered double hydroxide-based nanomaterials for biomedical applications

Against the backdrop of increased public health awareness, inorganic nanomaterials have been widely explored as promising nanoagents for various kinds of biomedical applications. Layered double hydroxides (LDHs), with versatile physicochemical advantages including excellent biocompatibility, pH-sensitive biodegradability, highly tunable chemical composition and structure, and ease of composite formation with other materials, have shown great promise in biomedical applications. In this review, we comprehensively summarize the recent advances in LDH-based nanomaterials for biomedical applications. Firstly, the material categories and advantages of LDH-based nanomaterials are discussed. The preparation and surface modification of LDH-based nanomaterials, including pristine LDHs, LDH-based nanocomposites and LDH-derived nanomaterials, are then described. Thereafter, we systematically describe the great potential of LDHs in biomedical applications including drug/gene delivery, bioimaging diagnosis, cancer therapy, biosensing, tissue engineering, and anti-bacteria. Finally, on the basis of the current state of the art, we conclude with insights on the remaining challenges and future prospects in this rapidly emerging field.

Nanoarchitectured two-dimensional layered double hydroxides-based nanocomposites for biomedical applications

Despite the exceptional physicochemical and morphological characteristics, the pristine layered double hydroxides (LDHs), or two-dimensional (2D) hydrotalcite clays, often suffer from various shortcomings in biomedicine, such as deprived thermal and chemical stabilities, acid-prone degradation, as well as lack of targeting ability, hampering their scale-up and subsequent clinical translation. Accordingly, diverse nanocomposites of LDHs have been fabricated by surface coating of organic species, impregnation of inorganic species, and generation of core-shell architectures, resulting in the complex state-of-the-art architectures. In this article, we initially emphasize various bothering limitations and the chemistry of these pristine LDHs, followed by discussions on the engineering strategies of different LDHs-based nanocomposites. Further, we give a detailed note on diverse LDH nanocomposites and their performance efficacy in various biomedical applications, such as drug delivery, bioimaging, biosensing, tissue engineering and cell patterning, deoxyribonucleic acid (DNA) extraction, as well as photoluminescence, highlighting the influence of various properties of installed supramolecular assemblies on their performance efficacy. In summary, we conclude with interesting perspectives concerning the lessons learned to date and the strategies to be followed to further advance their scale-up processing and applicability in medicine.

Amorphous Calcium Phosphates: Solvent-Controlled Growth and Stabilization through the Epoxide Route

Calcium phosphates stand among the most promising nanobiomaterials in key biomedical applications, such as bone repairment, signalling or drug/gene delivery. Their intrinsic properties as crystalline structure, composition, particle shape and size define their successful use. Among these compounds, metastable amorphous calcium phosphate (ACP) is currently gaining particular attention due to its inherently high reactivity in solution, which is crucial in bone development mechanisms. However, the preparation of this highly desired (bio)material with control over its shape, size and phase purity remains as a synthetic challenge. In this work, the epoxide route was adapted for the synthesis of pure and stable ACP colloids. By using biocompatible solvents, such as ethylene glycol and/or glycerine, it was possible to avoid the natural tendency of ACP to maturate into more stable and crystalline apatites. Moreover, this procedure offers size control, ranging from small nanoparticles (60 nm) to micrometric spheroids (>500 nm). The eventual fractalization of the internal mesostructured can be tuned, by simply adjusting the composition of the ethylene glycol:glycerine solvent mixture. These findings introduce the use of green solvents as a new tool to control crystallinity and/or particle size in the synthesis of nanomaterials, avoiding the use of capping agents and preserving the natural chemical reactivity of the pristine surface.

Development of Mesopore Structure of Mixed Metal Oxide through Albumin-Templated Coprecipitation and Reconstruction of Layered Double Hydroxide

Mixed metal oxide (MMO) with relatively homogeneous mesopores was successfully obtained by calcination and reconstruction of albumin-templated layered double hydroxide (LDH). The aggregation degree of albumin-template was controlled by adjusting two different synthesis routes, coprecipitation and reconstruction. X-ray diffraction patterns and scanning electron microscopic images indicated that crystal growth of LDH was fairly limited during albumin-templated coprecipitation due to the aggregation. On the hand, crystal growth along the lateral direction was facilitated in albumin-templated reconstruction due to the homogeneous distribution of proteins moiety. Different state of albumin during LDH synthesis influenced the local disorder and porous structure of calcination product, MMO. The N₂ adsorption-desorption isotherms demonstrated that calcination on reconstructed LDH produced MMO with large specific surface area and narrow distribution of mesopores compared with calcination of coprecipitated LDH.

Mild Homogeneous Synthesis of Gold Nanoparticles through the Epoxide Route: Kinetics, Mechanisms, and Related One-Pot Composites

A new one-pot homogeneous methodology at room temperature to obtain Au nanoparticles (AuNP) on the basis of the epoxide route is presented. The proposed method takes advantage of the homogenous generation of OH^- moieties driven by epoxide ring-opening, mediated by chloride nucleophilic attack. Once reached alkaline conditions, the reducing medium allows the quantitative formation of AuNP under well-defined kinetic control. A stabilizing agent, such as polyvinylpyrrolidone (PVP) or cetyltrimethylammonium chloride (CTAC), is required to maintain the AuNP stable. Meanwhile their presence dramatically affects the reduction kinetics and pathway, as demonstrated by the evolution of the UV/Vis spectra, small-angle X-ray scattering (SAXS) patterns, and pH value along the reaction. In the presence of PVP nanogold spheroids are obtained following a similar reduction mechanism as that observed for control experiments in the absence of PVP. However, if CTAC is employed a stable complex with Au^III is formed, leading to a different reaction pathway and resulting in ellipsoidal-like shaped AuNP. Moreover, the proposed methodology allows stabilize the growing AuNP, by coupling their formation with nonalkoxidic sol-gel reactions, leading to nanocomposite gels with embedded metallic nanoparticles. The epoxide route thus offers a versatile scenario for the one-pot preparation of new metal nanoparticles-inorganic/hybrid matrices nanocomposites with valuable optical properties.

Precise size control of layered double hydroxide nanoparticles through reconstruction using tripodal ligands

Layered double hydroxide nanoparticles were synthesized via reconstruction, suppressing crystal growth with tripodal ligands.