Promotion of Water Channels for Enhanced Ion Transport in 14 nm Diameter Carbon Nanotubes

A Solar Evaporator Based on Polypyrrole Coated 3D Carbon Nanotube Materials for Efficient Solar-Driven Vapor Generation

Highly porous light absorbers are fabricated based on polypyrrole (PPy)-coated carbon nanotube (CNT). Carbon nanotube sponge (CNTS) or carbon nanotube array (CNTA) with three-dimensional (3D) network structure is the framework of porous light absorbers. Both PPy@CNTS and PPy@CNTA composites exhibit excellent light absorption of the full solar spectrum. The CNTS and CNTA with porous structures have extremely large effective surface area for light absorption and for water evaporation that has great practical benefit to the solar-driven vapor generation. The PPy layer on CNT sidewalls significantly improves the hydrophilicity of porous CNTS and CNTA. The good wettability of water on CNT sidewalls makes water transport in porous CNT materials highly efficient. The PPy@CNTS and PPy@CNTA light absorbers achieve high water evaporation rates of 3.35 and 3.41 kg m-2 h-1 , respectively, under 1-sun radiation. The orientation of nano channels in CNTA-based light absorbers also plays an important role in the solar-driven vapor generation. The water transport and vapor escape are more efficient in CNTA-based light absorbers as compared to the CNTS-based light absorbers due to the relatively short path for the water transport and the vapor escape in CNTA-based light absorbers.

High-Performance Biomimetic Water Channel: The Constructive Interplay of Interaction Parameters and Hydrophilic Doping Levels

In this study, we introduce a superfast biomimetic water channel mimicking the hydrophobicity scales of the Aquaporin (AQP) pore lining. Molecular dynamics simulation is used to scrutinize the impact of hydrophilic doping level in the nanotube and the water-wall interaction strength on water permeability. In the designed biomimetic channel, the constructive interplay of Lennard-Jones (LJ) ε parameters and hydrophilic doping levels increased the possibility of ultrafast water transport. Moreover, a unique set of LJ parameters is discovered for each biomimetic channel with different hydrophilic doping levels, enhancing water permeation. Inside high-performance biomimetic channels, water distribution surprisingly implies a varying pore geometry that narrows down in the middle, mimicking the pattern obtained from GplF pore analysis, evoking the narrow pore induced by the aromatic/arginine selectivity filter. This exciting accordance occurred as a result of tailoring specific hydrophilic arrays within the hydrophobic channel backbone by mimicking the AQP pore interior. The main takeaway of hydrophilic doping arrays implanted within the hydrophobic nanotube is to break the large barrier in the water-wall vdW energy profile into multiple reduced ones to increase water conduction. Consequently, the "water jumping" phenomenon in the middle of the biomimetic channel occurs under specific circumstances. The biomimetic channel with the highest value of water permeability of about 13.67 ± 0.66 × 10^-13 cm³·s^-1 exhibits the best mechanism for artificial water channels (AWCs), serving superfast water transport considering the low entrance barrier and weak water-wall interaction.

Improved wettability and enhanced ionic transport in highly porous CNT sponge

We investigated the effect of an electric treatment on the wettability of aqueous solution on carbon nanotubes (CNT) and ion transport behaviors in superhydrophobic porous carbon nanotube sponges (CNTS). This electric activation treatment where an electric voltage was applied across highly porous CNT sponge induced an electrowetting effect. This effect significantly reduced interfacial tensions between CNT sidewalls and aqueous liquids. Meanwhile, polar functional groups were also introduced on CNTs. Both electrowetting effect and polar functional groups greatly improved the wettability of aqueous solutions on CNT sidewalls. After the electric treatment, we observed a dramatic increase in the overall rate of ion flow across porous CNT sponges. The formation of solution channels during the electric treatment is responsible for the enhanced ionic transport in porous CNT sponges. The overall rate of ion flow increased with the increases in electric treatment time and voltage. The crucial role of electric treatment parameters in the ion transport provides a new strategy for precisely controlling the ion transport across CNT sponges by tuning electric treatment time or voltage. Importantly, the good wettability of aqueous solution on CNT sidewalls greatly increased the effective surface area of CNT sponges and thus significantly improved the performance of CNTS-based supercapacitors after the electric treatment.

Water in Nanopores and Biological Channels: A Molecular Simulation Perspective

This Review explores the dynamic behavior of water within nanopores and biological channels in lipid bilayer membranes. We focus on molecular simulation studies, alongside selected structural and other experimental investigations. Structures of biological nanopores and channels are reviewed, emphasizing those high-resolution crystal structures, which reveal water molecules within the transmembrane pores, which can be used to aid the interpretation of simulation studies. Different levels of molecular simulations of water within nanopores are described, with a focus on molecular dynamics (MD). In particular, models of water for MD simulations are discussed in detail to provide an evaluation of their use in simulations of water in nanopores. Simulation studies of the behavior of water in idealized models of nanopores have revealed aspects of the organization and dynamics of nanoconfined water, including wetting/dewetting in narrow hydrophobic nanopores. A survey of simulation studies in a range of nonbiological nanopores is presented, including carbon nanotubes, synthetic nanopores, model peptide nanopores, track-etched nanopores in polymer membranes, and hydroxylated and functionalized nanoporous silica. These reveal a complex relationship between pore size/geometry, the nature of the pore lining, and rates of water transport. Wider nanopores with hydrophobic linings favor water flow whereas narrower hydrophobic pores may show dewetting. Simulation studies over the past decade of the behavior of water in a range of biological nanopores are described, including porins and β-barrel protein nanopores, aquaporins and related polar solute pores, and a number of different classes of ion channels. Water is shown to play a key role in proton transport in biological channels and in hydrophobic gating of ion channels. An overall picture emerges, whereby the behavior of water in a nanopore may be predicted as a function of its hydrophobicity and radius. This informs our understanding of the functions of diverse channel structures and will aid the design of novel nanopores. Thus, our current level of understanding allows for the design of a nanopore which promotes wetting over dewetting or vice versa. However, to design a novel nanopore, which enables fast, selective, and gated flow of water de novo would remain challenging, suggesting a need for further detailed simulations alongside experimental evaluation of more complex nanopore systems.