Atomic Heterointerface-Induced Local Charge Distribution and Enhanced Water Adsorption Behavior in a Cobalt Phosphide Electrocatalyst for Self-Powered Highly Efficient Overall Water Splitting

Nano-Scale Engineering of Heterojunction for Alkaline Water Electrolysis

Alkaline water electrolysis is promising for low-cost and scalable hydrogen production. Renewable energy-driven alkaline water electrolysis requires highly effective electrocatalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). However, the most active electrocatalysts show orders of magnitude lower performance in alkaline electrolytes than that in acidic ones. To improve such catalysts, heterojunction engineering has been exploited as the most efficient strategy to overcome the activity limitations of the single component in the catalyst. In this review, the basic knowledge of alkaline water electrolysis and the catalytic mechanisms of heterojunctions are introduced. In the HER mechanisms, the ensemble effect emphasizes the multi-sites of different components to accelerate the various intermedium reactions, while the electronic effect refers to the d-band center theory associated with the adsorption and desorption energies of the intermediate products and catalyst. For the OER with multi-electron transfer, a scaling relation was established: the free energy difference between HOO* and HO* is 3.2 eV, which can be overcome by electrocatalysts with heterojunctions. The development of electrocatalysts with heterojunctions are summarized. Typically, Ni(OH)2/Pt, Ni/NiN3 and MoP/MoS2 are HER electrocatalysts, while Ir/Co(OH)2, NiFe(OH)x/FeS and Co9S8/Ni3S2 are OER ones. Last but not the least, the trend of future research is discussed, from an industry perspective, in terms of decreasing the number of noble metals, achieving more stable heterojunctions for longer service, adopting new craft technologies such as 3D printing and exploring revolutionary alternate alkaline water electrolysis.

Adsorption Site Regulations of [W-O]-Doped CoP Boosting the Hydrazine Oxidation-Coupled Hydrogen Evolution at Elevated Current Density

Hydrazine oxidation reaction (HzOR) assisted hydrogen evolution reaction (HER) offers a feasible path for low power consumption to hydrogen production. Unfortunately however, the total electrooxidation of hydrazine in anode and the dissociation kinetics of water in cathode are critically depend on the interaction between the reaction intermediates and surface of catalysts, which are still challenging due to the totally different catalytic mechanisms. Herein, the [W-O] group with strong adsorption capacity is introduced into CoP nanoflakes to fabricate bifunctional catalyst, which possesses excellent catalytic performances towards both HER (185.60 mV at 1000 mA cm-2) and HzOR (78.99 mV at 10,00 mA cm-2) with the overall electrolyzer potential of 1.634 V lower than that of the water splitting system at 100 mA cm-2. The introduction of [W-O] groups, working as the adsorption sites for H2O dissociation and N2H4 dehydrogenation, leads to the formation of porous structure on CoP nanoflakes and regulates the electronic structure of Co through the linked O in [W-O] group as well, resultantly boosting the hydrogen production and HzOR. Moreover, a proof-of-concept direct hydrazine fuel cell-powered H2 production system has been assembled, realizing H2 evolution at a rate of 3.53 mmol cm-2 h-1 at room temperature without external electricity supply.

Efficient Self-Powered Overall Water Splitting by Ni4 Mo/MoO2 Heterogeneous Nanorods Trifunctional Electrocatalysts

The exploration of cost-effective multifunctional electrodes with high activity toward energy storage and conversion systems, such as self-powered alkaline water electrolysis, is very meaningful, although studies remain quite limited. Herein, a heterogeneous nickel-molybdenum (NiMo)-based electrode is fabricated for the first time as a trifunctional electrode for asymmetric supercapacitor (ASC), hydrogen evolution reaction, and oxygen evolution reaction. The trifunctional electrode consists of Ni₄ Mo and MoO₂ (denoted Ni₄ Mo/MoO₂ ) with hierarchical nanorod heterostructure and abundant heterogeneous nanointerfaces creating sufficient active sites and efficient charge transfer for achieving high performance self-power electrochemical devices. The ASC consists of the as-prepared Ni₄ Mo/MoO₂ positive electrode, showing a broad potential window of 1.6 V, and a maximum energy density of 115.6 Wh kg^-1 , while the alkaline overall water splitting (OWS) assembled using the as-prepared Ni₄ Mo/MoO₂ as bifunctional catalysts only requires a low cell voltage of 1.48 V to achieve a current density of 10 mA cm^-2 in aqueous alkaline electrolyte. Finally, by integrating the Ni₄ Mo/MoO₂ -based ASC and OWS devices, an aqueous self-powered OWS is assembled, which self-power the OWS to generate hydrogen gas and oxygen gas, verifying great potential of the as-prepared Ni₄ Mo/MoO₂ for sustainable and renewable energy storage and conversion system.

Constructing Molybdenum Phosphide@Cobalt Phosphide Heterostructure Nanoarrays on Nickel Foam as a Bifunctional Electrocatalyst for Enhanced Overall Water Splitting

The construction of multi-level heterostructure materials is an effective way to further the catalytic activity of catalysts. Here, we assembled self-supporting MoS₂@Co precursor nanoarrays on the support of nickel foam by coupling the hydrothermal method and electrostatic adsorption method, followed by a low-temperature phosphating strategy to obtain Mo₄P₃@CoP/NF electrode materials. The construction of the Mo₄P₃@CoP heterojunction can lead to electron transfer from the Mo₄P₃ phase to the CoP phase at the phase interface region, thereby optimizing the charge structure of the active sites. Not only that, the introduction of Mo₄P₃ will make water molecules preferentially adsorb on its surface, which will help to reduce the water molecule decomposition energy barrier of the Mo₄P₃@CoP heterojunction. Subsequently, H* overflowed to the surface of CoP to generate H₂ molecules, which finally showed a lower water molecule decomposition energy barrier and better intermediate adsorption energy. Based on this, the material shows excellent HER/OER dual-functional catalytic performance under alkaline conditions. It only needs 72 mV and 238 mV to reach 10 mA/cm² for HER and OER, respectively. Meanwhile, in a two-electrode system, only 1.54 V is needed to reach 10 mA/cm², which is even better than the commercial RuO₂/NF||Pt/C/NF electrode pair. In addition, the unique self-supporting structure design ensures unimpeded electron transmission between the loaded nanoarray and the conductive substrate. The loose porous surface design is not only conducive to the full exposure of more catalytic sites on the surface but also facilitates the smooth escape of gas after production so as to improve the utilization rate of active sites. This work has important guiding significance for the design and development of high-performance bifunctional electrolytic water catalysts.

Nanoscale hetero-interfaces for electrocatalytic and photocatalytic water splitting

As green and sustainable methods to produce hydrogen energy, photocatalytic and electrochemical water splitting have been widely studied. In order to find efficient photocatalysts and electrocatalysts, materials with various composition, size, and surface/interface are investigated. In recent years, constructing suitable nanoscale hetero-interfaces can not only overcome the disadvantages of the single-phase material, but also possibly provide new functionalities. In this review, we systematically introduce the fundamental understanding and experimental progress in nanoscale hetero-interface engineering to design and fabricate photocatalytic and electrocatalytic materials for water splitting. The basic principles of photo-/electro-catalytic water splitting and the fundamentals of nanoscale hetero-interfaces are briefly introduced. The intrinsic behaviors of nanoscale hetero-interfaces on electrocatalysts and photocatalysts are summarized, which are the electronic structure modulation, space charge separation, charge/electron/mass transfer, support effect, defect effect, and synergistic effect. By highlighting the main characteristics of hetero-interfaces, the main roles of hetero-interfaces for electrocatalytic and photocatalytic water splitting are discussed, including excellent electronic structure, efficient charge separation, lower reaction energy barriers, faster charge/electron/mass transfer, more active sites, higher conductivity, and higher stability on hetero-interfaces. Following above analysis, the developments of electrocatalysts and photocatalysts with hetero-structures are systematically reviewed.

Different nanostructured CoP microcubes derived from metal formate frameworks with enhanced oxygen evolution reaction performance

Different nanostructured CoP microcubes derived from metal formate frameworks with enhanced oxygen evolution reaction performance.

Iron and chromium co-doped cobalt phosphide porous nanosheets as robust bifunctional electrocatalyst for efficient water splitting

It is still a huge challenge to develop highly efficient and low-cost non-precious metal-based electrocatalysts for overall water splitting in alkaline electrolytes. Herein, Cr and Fe co-doped CoP porous mesh nanosheets (Mesh-CrFe-CoP NSs) were synthesized through hydrolysis reaction, ion exchange etching and subsequent low-temperature phosphating process. The Mesh-CrFe-CoP NSs provides overpotentials at a current density of 10 mA cm^-2under alkaline electrolyte of 103.7 mV and 256.4 mV for HER and OER, respectively. Furthermore, when using Mesh-CrFe-CoP NSs as anode and cathode, the water splitting system could afford a current density of 10 mA cm^-2at 1.55 V, which is better than an electrolytic cell composed of 20% Pt/C and RuO₂. The excellent electrocatalytic performance of Mesh-CrFe-CoP NSs is attributed to the co-doping and porous nanostructure. Specifically, the Cr and Fe co-doped porous CoP nanosheets electrocatalyst not only provided abundant exposure active sites, accelerated the entry of liquid and the diffusion of gas, but also regulated the electronic environment of active sites, and thus enhanced the electrochemical performance. This work proposes a strategy for the rational design of highly efficient and stable non-precious metal co-doped phosphide electrocatalysts in the of electrochemical water splitting.

Interfacial Structural and Electronic Regulation of MoS2 for Promoting Its Kinetics and Activity of Alkaline Hydrogen Evolution

The alkaline hydrogen evolution reaction (HER) of MoS2 is hampered by its sluggish water dissociation kinetics as well as limited edge sites. Herein, Ni3S2/MoS2 is fabricated as a model catalyst to highlight interfacial structural and electronic modulations of MoS2 for realizing its high performance in the alkaline HER. Experiments and density functional theory results demonstrate that the coupled Ni3S2 species can not only promote the adsorption and dissociation of H2O to boost the alkaline HER kinetics but also tailor the inert plane of MoS2 to create abundant unsaturated edge-like active sites, while the interfacial electron interaction can regulate the band gaps and Gibbs free energy of hydrogen adsorption of MoS2 to improve the electron conductivity as well as HER activity. Moreover, field emission scanning electron microscopy, transmission electron microscopy, Raman, ex situ synchrotron radiation X-ray absorption, and X-ray photoelectron spectroscopy results reveal the excellent structural stability of Ni3S2/MoS2 during the HER. As expected, the target Ni3S2/MoS2 achieves an ultralow overpotential of 68 mV at 10 mA cm-2, a fast alkaline HER kinetics, and remarkable durability. The proposed concept of interfacial structural and electronic reorganization could be extended to develop other functional materials.

In Situ Formation of Surface-Induced Oxygen Vacancies in Co9S8/CoO/NC as a Bifunctional Electrocatalyst for Improved Oxygen and Hydrogen Evolution Reactions

Creating oxygen vacancies and introducing heterostructures are two widely used strategies in Co-based oxides for their efficient electrocatalytic performance, yet both strategies have rarely been used together to design a bifunctional electrocatalyst for an efficient overall water splitting. Herein, we propose a facile strategy to synthesize oxygen-defect-rich Co9S8/CoO hetero-nanoparticles with a nitrogen-doped carbon shell (ODR-Co9S8/CoO/NC) through the in situ conversion of heterojunction along with surface-induced oxygen vacancies, simply via annealing the precursor Co3S4/Co(OH)2/ZIF-67. The as-prepared ODR-Co9S8/CoO/NC shows excellent bifunctional catalytic activities, featuring a low overpotential of 217 mV at 10 mA cm-2 in the oxygen evolution reaction (OER) and 160 mV at 10 mA cm-2 in the hydrogen evolution reaction (HER). This performance excellency is attributed to unique heterostructure and oxygen defects in Co9S8/CoO nanoparticles, the current work is expected to offer new insights to the design of cost-effective, noble-metal-free electrocatalysts.

The exploration of deoxygenation reactions for alcohols and derivatives using earth-abundant reagents

In Earth matter evolution, the deoxygenation process plays a central role as plant and animal remains, which are composed by highly oxygenated molecules, were gradually deoxygenated into hydrocarbons to give fossil fuels deep in the Earth crust. The understanding of this process is becoming crucial to the entire world and to the sustainable development of mankind. This review provides a brief summary of the extensive deoxygenation research under mild, potentially sustainable conditions. We also summarize some challenges and opportunities for potential deoxygenation reactions in the future.

Gold-Incorporated Cobalt Phosphide Nanoparticles on Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution Electrocatalysis

Transition metal phosphides (TMPs) demonstrate great potential for hydrogen evolution reaction (HER) electrocatalysis, but their activities need further improvement. Herein we report a novel Au incorporation strategy to boost the HER catalytic performance of CoP. As a proof of concept, heterostructured Au/CoP nanoparticles dispersed on nitrogen-doped carbon with unique porosity, denoted as Au/CoP@NC-3, are synthesized by thermal treatment of Au-nanoparticle-incorporated ZIF-67 precursor. It shows excellent HER activity as well as good durability in acidic and alkaline condition, respectively, greatly outperforming its Au-free analogue, namely, CoP@NC. In-depth analysis suggests that the improved HER activity of Au/CoP@NC-3 is attributed to the presence of Au nanoparticles which enlarge the electrochemical active surface areas and adjust the electronic structure of active CoP species to enhance the water adsorption and optimize H adsorption for the accelerated HER process.

Interfacial effect of Co4S3–Co9S8 nanoparticles hosted on rGO sheets derived from molecular precursor pyrolysis on enhancing electrochemical behaviour

Co₄S₃–Co₉S₈ nanoparticles with abundant interfaces hosted on reduced graphene oxide were synthesized via a monomolecular pyrolysis strategy to boost catalytic activity.

New Insights into Layered Graphene Materials as Substrates to Regulate Synthesis of Ni-P Nanomaterials for Electrocatalytic Oxidation of Methanol and Water

The doping ring-core nickel phosphide/graphene nanomaterial is obtained by H₂ reduction of the flower-like nickel phosphates/graphene oxide (NiPOGO) and sea urchin-like nickel phosphates/chemically converted graphene (NiPOG) substrates. The obtained structure of nickel phosphates depends on the influence of different kinds of oxygen-containing groups on the graphene substrate. The substrate can also affect the particle size and distribution of nickel phosphate nanoparticles. The substrate can adjust the particle size, distribution, and exposed growth direction of nickel phosphide. These materials with high activity are employed as electrochemical catalysts for methanol oxidation reactions, which is ∼7 times that of pure nickel phosphide, and there is a very small Tafel slope of 47 mV decade^-1 in the water oxidation reaction. Our results highlight that the substrate structure is essential to catalytic materials for electrochemical oxidation of methanol and water.

Enhanced Synergetic Catalytic Effect of Mo2C/NCNTs@Co Heterostructures in Dye-Sensitized Solar Cells: Fine-Tuned Energy Level Alignment and Efficient Charge Transfer Behavior

A highly efficient and stable electrocatalyst with the novel heterostructure of Co-embedded and N-doped carbon nanotubes supported Mo₂C nanoparticles (Mo₂C/NCNTs@Co) is creatively constructed by adopting the one-step metal catalyzed carbonization-nitridation strategy. Systematic characterizations and density functional theory (DFT) calculations reveal the advanced structural and electronic properties of Mo₂C/NCNTs@Co heterostructure, in which the Co-embedded and N-doped CNTs with tunable diameters present electron-donating effect and the work function is correspondingly regulated from 4.91 to 4.52 eV, and the size-controlled Mo₂C nanoparticles exhibit Pt-like 4d electronic structure and the well matched work function (4.85 eV) with I^-/I₃^- redox couples (4.90 eV). As a result, the conductive NCNTs@Co substrate with fine-tuned energy level alignment accelerates the electron transportation and the electron migration from NCNTs@Co to Mo₂C, and the active Mo₂C shows high affinity for I₃^- adsorption and high charge transfer ability for I₃^- reduction, which reach a decent synergetic catalytic effect in Mo₂C/NCNTs@Co heterostructure. The DSSC with Mo₂C/NCNTs@Co CE achieves a high photoelectric conversion efficiency of 8.82% and exceptional electrochemical stability with a residual efficiency of 7.95% after continuous illumination of 200 h, better than Pt-based cell. Moreover, the synergistic catalytic mechanism toward I₃^- reduction is comprehensively studied on the basis of structure-activity correlation and DFT calculations. The advanced heterostructure engineering and electronic modulation provide a new design principle to develop the efficient, stable, and economic hybrid catalysts in relevant electrocatalytic fields.

CoO Promoted the Catalytic Activity of Nitrogen-Doped MoS2 Supported on Carbon Fibers for Overall Water Splitting

Non-noble metal electrocatalysts have recently witnessed increasing attention for the hydrogen evolution reaction (HER) in acidic electrolytes. However, in alkaline electrolytes, the slow kinetics of water splitting leads to poor HER activities. In this study, we describe the preparation of a hybrid material consisting of cobalt oxide (CoO) decorated on nitrogen-doped MoS₂ supported on carbon fibers (CoO/N-MoS₂/CF) through a two-step process combining hydrothermal technique and electrochemical deposition. The electrochemical properties of the CoO/N-MoS₂/CF electrocatalyst were assessed in alkaline medium. The results revealed that CoO/N-MoS₂/CF exhibits excellent bifunctional electrocatalytic activity for the HER and oxygen evolution reaction (OER). The CoO/N-MoS₂/CF delivered a current density of 10 mA/cm² at an overpotential of only 78 mV for the HER and a current density of 50 mA/cm² at 458 mV for the OER in 1.0 M KOH, performing better than many noble metal-free electrocatalysts. The enhanced catalytic properties of the hybrid nanomaterial could be ascribed to its hierarchical structure, and increased number of active sites, as well as the synergetic cooperation between its different components. Additionally, the CoO/N-MoS₂/CF nanomaterial was investigated as both cathode and anode for full water splitting in 1.0 M KOH. The water electrolyzer delivered a maximum current density of 53 mA cm^-2 at an applied cell voltage of 1.5 V, which is very favorable for overall water-splitting applications.