Bromine Incorporation and Suppressed Cation Rotation in Mixed-Halide Perovskites

Phase Transitions and Dynamics in Mixed Three- and Low-Dimensional Lead Halide Perovskites

Lead halide perovskites are extensively investigated as efficient solution-processable materials for photovoltaic applications. The greatest stability and performance of these compounds are achieved by mixing different ions at all three sites of the APbX3 structure. Despite the extensive use of mixed lead halide perovskites in photovoltaic devices, a detailed and systematic understanding of the mixing-induced effects on the structural and dynamic aspects of these materials is still lacking. The goal of this review is to summarize the current state of knowledge on mixing effects on the structural phase transitions, crystal symmetry, cation and lattice dynamics, and phase diagrams of three- and low-dimensional lead halide perovskites. This review analyzes different mixing recipes and ingredients providing a comprehensive picture of mixing effects and their relation to the attractive properties of these materials.

Atomic Structure and Dynamics of Organic-Inorganic Hybrid Perovskite Formamidinium Lead Iodide

The atomic dynamic behaviors of formamidinium lead iodide [HC(NH2)2PbI3] are critical for understanding and improving photovoltaic performances. However, they remain unclear. Here, we investigate the structural phase transitions and the reorientation dynamics of the formamidinium cation [HC(NH2)2+, FA+] of FAPbI3 using neutron scattering techniques. Two structural phase transitions occur with decreasing temperature, from cubic to tetragonal phase at 285 K and then to another tetragonal at 140 K, accompanied by gradually frozen reorientation of FA cations. The nearly isotropic reorientation in the cubic phase is suppressed to reorientation motions involving a two-fold (C2) rotation along the N···N axis and a four-fold (C4) rotation along the C-H axis in the tetragonal phase, and eventually to local disordered motion as a partial C4 along the C-H axis in another tetragonal phase, thereby indicating an intimate interplay between lattice and orientation degrees of freedom in the hybrid perovskite materials. The present complete atomic structure and dynamics provide a solid standing point to understand and then improve photovoltaic properties of organic-inorganic hybrid perovskites in the future.

Rotational Dynamics of Organic Cations in Formamidinium Lead Iodide Perovskites

We report results from quasi-elastic neutron scattering studies on the rotational dynamics of formamidinium (HC[NH₂]₂⁺, FA) and methylammonium (CH₃NH₃⁺, MA) cations in FA_1-xMA_xPbI₃ with x = 0 and 0.4 and compare it to the dynamics in MAPbI₃. For FAPbI₃, the FA cation dynamics evolve from nearly isotropic rotations in the high-temperature (T > 285 K) cubic phase through reorientations between preferred orientations in the intermediate-temperature tetragonal phase (140 K < T ⩽ 285 K) to an even more complex dynamics, due to a disordered arrangement of the FA cations, in the low-temperature tetragonal phase (T ⩽ 140 K). For FA_0.6MA_0.4PbI₃, the dynamics of the respective organic cations evolve from a relatively similar behavior to FAPbI₃ and MAPbI₃ at room temperature to a different behavior in the lower-temperature phases where the MA cation dynamics are a factor of 50 faster as compared to those of MAPbI₃. This insight suggests that tuning the MA/FA cation ratio may be a promising approach to tailoring the dynamics and, in effect, optical properties of FA_1-xMA_xPbI₃.

Disorder to order: how halide mixing in MAPbI3-xBrx perovskites restricts MA dynamics

Mixed-halide lead perovskites are of particular interest for the design of tandem solar cells currently reaching record efficiencies. While halide phase segregation upon illumination of mixed perovskites is extensively studied, the effect of halide disorder on A cation dynamics is not well understood, despite its importance for charge carrier diffusion and lifetime. Here, we study the methylammonium (MA) reorientational dynamics in mixed halide MAPbI_3-xBr_x perovskites by a combined approach of experimental solid-state NMR spectroscopy and molecular dynamics (MD) simulations based on machine-learning force-fields (MLFF). ²⁰⁷Pb NMR spectra indicate the halides are randomly distributed over their lattice positions, whereas PXRD measurements show that all mixed MAPbI_3-xBr_x samples are cubic. The experimental ¹⁴N spectra and ¹H double-quantum (DQ) NMR data reveal anisotropic MA reorientations depending on the halide composition and thus associated disorder in the inorganic sublattice. MD calculations allow us to correlate these experimental results to restrictions of MA dynamics due to preferred MA orientations in their local Pb₈I_12-nBr_n "cages". Based on the experimental and simulated results, we develop a phenomenological model that correlates the ¹H dipolar coupling and thus the MA dynamics with the local composition and reproduces the experimental data over the whole composition range. We show that the dominant interaction between the MA cations and the Pb-X lattice that influences the cation dynamics is the local electrostatic potential being inhomogeneous in mixed halide systems. As such, we generate a fundamental understanding of the predominant interaction between the MA cations and the inorganic sublattice, as well as MA dynamics in asymmetric halide coordinations.

The effect of caesium alloying on the ultrafast structural dynamics of hybrid organic-inorganic halide perovskites

Hybrid inorganic-organic perovskites have attracted considerable attention over recent years as promising processable electronic materials. In particular, the rich structural dynamics of these 'soft' materials has become a subject of investigation and debate due to their direct influence on the perovskites' optoelectronic properties. Significant effort has focused on understanding the role and behaviour of the organic cations within the perovskite, as their rotational dynamics may be linked to material stability, heterogeneity and performance in (opto)electronic devices. To this end, we use two-dimensional IR spectroscopy (2DIR) to understand the effect of partial caesium alloying on the rotational dynamics of the methylammonium cation in the archetypal hybrid perovskite CH₃NH₃PbI₃. We find that caesium incorporation primarily inhibits the slower 'reorientational jump' modes of the organic cation, whilst a smaller effect on the fast 'wobbling time' may be due to distortions and rigidisation of the inorganic cuboctahedral cage. 2DIR centre-line-slope analysis further reveals that while static disorder increases with caesium substitution, the dynamic disorder (reflected in the phase memory of the N-H stretching mode of methylammonium) is largely independent of caesium addition. Our results contribute to the development of a unified model of cation dynamics within organohalide perovskites.

Surface Passivation and Energetic Modification Suppress Nonradiative Recombination in Perovskite Solar Cells

Surface passivation via post-treatment is an important strategy for improving power conversion efficiency and operational stability of perovskite solar cells. However, so far the interaction mechanisms between passivating additive and perovskite are not well understood. Here, we report the atomic-scale interaction of surface passivating additive 2,2-difluoroethylammonium bromine (2FEABr) on the MAPbI₃. It is found that the bulky 2FEA⁺ cations tend to distribute at film surface, while the Br^- anions diffuse from surface into bulk. A combination of ¹⁹F, ²⁰⁷Pb, and ²H solid-state NMR further reveal the Br^- anions' partial substitution for the I^- sites, the restricted motion of partial MA⁺ cations, and the firmed perovskite lattices, which would improve charge transport and stability of the perovskite films. Optical spectroscopy and ultraviolet photoelectron spectroscopy demonstrate that the 2FEABr induced surface passivation and energetic modification suppress the nonradiative recombination loss. These findings enable the efficiency of the p-i-n structured PSC significantly increasing from 19.44 to 21.06%, accompanied by excellent stability. Our work further establishes more knowledge link between passivating additive and PSC performance.

Improved highly efficient Dion-Jacobson type perovskite light-emitting diodes by effective surface polarization architecture

Quasi-two-dimensional (quasi-2D) perovskites are emerging as promising materials for highly stable light-emitting diodes (LEDs). However, their lower charge transport mobilities and higher defect densities may constrain their light-emitting efficiency. Here, we combine an excessive-salt-assisted (ESA) process with antisolvent treatments to inhibit the defects in Dion-Jacobson-type perovskite LEDs. Such a method could improve the film quality and recombination efficiency. By further investigation, we found that artificially building a bulk junction interface and enhancing surface polarization could play a more important role in promoting the ability of charge carrier injection and recombination for high-performance LED devices. Accordingly, the DJ-type quasi-2D perovskite LED can achieve a high external quantum efficiency (EQE) of 7.1%.

Correlated organic-inorganic motion enhances stability and charge carrier lifetime in mixed halide perovskites

Organic cations are believed to have little influence on the charge carrier lifetime in hybrid organic-inorganic perovskites. Experiments defy this expectation. We consider formamidinium lead iodide (FAPbI₃) doping with and without Br as two prototypical systems, and perform ab initio time-domain nonadiabatic (NA) molecular dynamics simulations to investigate nonradiative electron-hole recombination. The simulations demonstrate that correlated organic-inorganic motion stabilizes the lattice and inhibits nonradiative charge recombination in FAPbI₃ upon Br doping. Br doping suppresses the rotation of FA and the vibrations of both organic and inorganic components, and leads to hole localization and the extent of localization is enhanced upon thermal impact, notably reducing the NA coupling by decreasing the overlap between the electron and hole wave functions. Doping also slightly increases the bandgap for further decreasing NA coupling and enhances the open-circuit voltage of perovskite solar cells. The small NA coupling and large bandgap beat the slow coherence loss, delaying electron-hole recombination and extending the charge carrier lifetime to 1.5 ns in Br-doped FAPbI₃, which is on the order of 1.1 ns in pristine FAPbI₃. The obtained time scales are in good agreement with experiments. Multiple phonon modes, including those of both the inorganic and organic components, couple to the electronic subsystem and accommodate the excess electronic energy lost during nonradiative charge recombination. The study reveals the unexpected atomistic mechanisms for the reduction of electron-hole recombination upon Br doping, rationalizes the experiments, and advances our understanding of the excited-state dynamics of perovskite solar cells.

Toward stable lead halide perovskite solar cells: A knob on the A/X sites components

Hybrid lead halide ABX3 perovskite solar cells (PSCs) have emerged as a strong competitor to the traditional solar cells with a certified power conversion efficiency beyond 25% and other remarkable features such as light weight, solution processability, and low manufacturing cost. Further development on the efficiency and stability brings forth increasing attention in the component regulation, such as partial or entire substitution of A/B/X sites by alternative elements with similar size. However, the relationships between composition, property, and performance are poorly understood. Here, the instability of PSCs from the photon-, moisture-, thermal-, and mechanical-induced degradation was first summarized and discussed. In addition, the component regulation from the A/X sites is highlighted from the aspects of band level alignment, charge-carrier dynamics, ion migration, crystallization behavior, residual strain, stoichiometry, and dimensionality control. Finally, the perspectives and future outlooks are highlighted to guide the rational design and practical application of PSCs.

Influence of Different Rotations of Organic Formamidinium Molecule on Electronic and Optical Properties of FAPbBr3 Perovskite

Hybrid organic–inorganic halide perovskites (HOIPs) have recently represented a material breakthrough for optoelectronic applications. Obviously, studying the interactions between the central organic cation and the Pb-X inorganic octahedral could provide a better understanding of HOIPs. In this work, we used a first-principles theoretical study to investigate the effect of different orientations of central formamidinium cation (FA+) on the electronic and optical properties of FAPbBr3 hybrid perovskite. In order to do this, the band structure (with and without spin–orbit coupling (SOC)), density of states (DOS), partial density of states (PDOS), electron density, distortion index, bond angle variance, dielectric function, and absorption spectra were computed. The findings revealed that a change in the orientation of FA+ caused some disorders in the distribution of interactions, resulting in the formation of some specific energy levels in the structure. The interactions between the inorganic and organic parts in different directions create a distortion index in the bonds of the inorganic octahedral, thus leading to a change in the volume of PbBr6. This is the main reason for the variations observed in the electronic and optical properties of FAPbBr3. The obtained results can be helpful in solar-cell applications.

Impact of Humidity and Temperature on the Stability of the Optical Properties and Structure of MAPbI3, MA0.7FA0.3PbI3 and (FAPbI3)0.95(MAPbBr3)0.05 Perovskite Thin Films

In situ real-time spectroscopic ellipsometry (RTSE) measurements have been conducted on MAPbI₃, MA_0.7FA_0.3PbI₃, and (FAPbI₃)_0.95(MAPbBr₃)_0.05 perovskite thin films when exposed to different levels of relative humidity at given temperatures over time. Analysis of RTSE measurements track changes in the complex dielectric function spectra and structure, which indicate variations in stability influenced by the underlying material, preparation method, and perovskite composition. MAPbI₃ and MA_0.7FA_0.3PbI₃ films deposited on commercial fluorine-doped tin oxide coated glass are more stable than corresponding films deposited on soda lime glass directly. (FAPbI₃)_0.95(MAPbBr₃)_0.05 films on soda lime glass showed improved stability over the other compositions regardless of the substrate, and this is attributed to the preparation method as well as the final composition.