Characteristics and Mechanisms of Phosphorous Adsorption by Peanut Shell-Derived Biochar Modified with Magnesium Chloride by Ultrasonic-Assisted Impregnation

Efficiency and mechanism of phosphate adsorption and desorption of a novel Mg-loaded biochar material

Phosphate removal is complicated by the need for resource recovery. Biochar shows promise for efficient phosphate adsorption, but it must be modified to enhance its adsorption capacity. In this work, magnesium (Mg)-loaded biochar was synthesized through a two-step dipping and calcination process, and the MgBC600 product was used to adsorb phosphate from simulated water and biogas slurry wastewater. The phosphate adsorption capacity of Mg-loaded biochar was 109.35 mg/g, which was 12 times higher than that of unmodified biochar. The R2 of the Langmuir and pseudo-second-order kinetic models were 0.988 and 0.990, respectively, which fitted the phosphate adsorption process of MgBC600. Phosphate adsorption by MgBC600 was a spontaneous and endothermic process. The adsorption mechanism study showed that phosphate adsorption was controlled by the formation and electrostatic attraction of MgHPO4. In addition, 98% of chemically adsorbed phosphate was released after regeneration. Using phosphate-adsorbed MgBC600 as a soil amendment, Arabidopsis thaliana was 1.47 times higher than that in the biochar-only group, demonstrating that this is a promising strategy for enhancing phosphate adsorption efficiency and adsorbent recycling.

Efficient Adsorption Removal of Phosphate from Rural Domestic Sewage by Waste Eggshell-Modified Peanut Shell Biochar Adsorbent Materials

In order to promote the improvement of the rural living environment, the treatment of rural domestic sewage has attracted much attention in China. Meanwhile, the rural regions' sewage discharge standards are becoming increasingly stringent. However, the standard compliance rate of total phosphorus (TP) is very low, and TP has become the main limiting pollutant for the water pollutants discharge standards of rural domestic sewage treatment facilities. In this study, waste eggshell (E) was employed as a calcium source, and waste peanut shell (C) was employed as a carbon source to prepare calcium-modified biochar adsorbent materials (E-C). The resulting E-C adsorbent materials demonstrated efficient phosphate (P) adsorption from aqueous solutions over the initial pH range of 6-9 and had adsorption selectivity. At an eggshell and peanut shell mass ratio of 1:1 and a pyrolysis temperature of 800 °C, the experimental maximum adsorption capacity was 191.1 mg/g. The pseudo second-order model and Langmuir model were best at describing the adsorption process. The dominant sorption mechanism for P is that Ca(OH)2 is loaded on biochar with P to form Ca5(PO4)3OH precipitate. E-C was found to be very effective for the treatment of rural domestic sewage. The removal rate of TP in rural domestic sewage was 91-95.9%. After adsorption treatment, the discharge of TP in rural sewage met the second-grade (TP < 3 mg/L) and even first-grade (TP < 2 mg/L). This study provides an experimental basis for efficient P removal by E-C adsorbent materials and suggests possible applications in rural domestic sewage.

Recent developments in metallic-nanoparticles-loaded biochars synthesis and use for phosphorus recovery from aqueous solutions. A critical review

Phosphorus (P) represents a major pollutant of water resources and at the same time a vital element for human and plants. P recovery from wastewaters and its reuse is a necessity in order to compensate the current important depletion of P natural reserves. The use of biochars for P recovery from wastewaters and their subsequent valorization in agriculture, instead of synthetic industrial fertilizers, promotes circular economy and sustainability concepts. However, P retention by pristine biochars is usually low and a modification step is always required to improve their P recovery efficiency. The pre- or post-treatment of biochars with metal salts seems to be one of the most efficient approaches. This review aims to summarize and discuss the most recent developments (from 2020- up to now) in: i) the role of the feedstock nature, the metal salt type, the pyrolysis conditions, and the experimental adsorption parameters on metallic-nanoparticles-loaded biochars properties and effectiveness in recovering P from aqueous solutions, as well as the dominant involved mechanisms, ii) the effect of the eluent solutions nature on the regeneration ability of P-loaded biochars, and iii) the practical challenges facing the upscaling of P-loaded biochars production and valorization in agriculture. This review shows that the synthesized biochars through slow pyrolysis at relatively high temperatures (up to 700-800 °C) of mixed biomasses with Ca- Mg-rich materials or impregnated biomasses with specific metals in order to from layered double hydroxides (LDHs) biochars composites exhibit interesting structural, textural and surface chemistry properties allowing high P recovery efficiency. Depending on the pyrolysis's and adsorption's experimental conditions, these modified biochars may recover P through combined mechanisms including mainly electrostatic attraction, ligand exchange, surface complexation, hydrogen bonding, and precipitation. Moreover, the P-loaded biochars can be used directly in agriculture or efficiently regenerated with alkaline solutions. Finally, this review emphasizes the challenges concerning the production and use of P-loaded biochars in a context of circular economy. They concern the optimization of P recovery process from wastewater in real-time scenarios, the reduction of energy-related biochars production costs and the intensification of communication/dissemination campaigns to all the concerned actors (i.e., farmers, consumers, stakeholders, and policymakers) on the benefits of P-loaded biochars reuse. We believe that this review is beneficial for new breakthroughs on the synthesis and green application of metallic-nanoparticles-loaded biochars.