Green Recovery of Gold through Biosorption, Biocrystallization, and Pyro-Crystallization

Biosorption of Precious Metals Present at Dilute Concentrations on Fungal Pellets

Biosorption on fungal pellets constitutes a promising way of removing precious metals, which are often present at dilute concentrations in wastewater. Herein, we studied the Ag and Au biosorption by Aspergillus tabacinus and Cladosporium cladosporioides pellets. For A. tabacinus pellets the optimum pH values for the biosorption of Ag and Au were 5 and 4, respectively, while for C. cladosporioides granules, the best-suited values were 3 and 4, respectively. Biosorption kinetics of both metals were also studied at low adsorbate concentrations (1 mg/L) and the pH values mentioned above, and the contact times that allow maximum recovery of the two metals were defined. At the pH values estimated as optimum, A. tabacinus pellets adsorbed greater amounts of Ag than C. cladosporioides pellets, while for Au the opposite occurred. We found that the pseudo-second-order model adequately represents Ag and Au biosorption kinetics under the conditions tested. Due to the growing demand and limited availability of these metals, their recovery from aqueous residual solutions is economically attractive and desirable in the expanding circular economy scheme.

Microbe-mediated sustainable bio-recovery of gold from low-grade precious solid waste: A microbiological overview

In an era of electronics, recovering the precious metal such as gold from ever increasing piles of electronic-wastes and metal-ion infested soil has become one of the prime concerns for researchers worldwide. Biological mining is an attractive, economical and non-hazardous to recover gold from the low-grade auriferous ore containing waste or soil. This review represents the recent major biological gold retrieval methods used to bio-mine gold. The biomining methods discussed in this review include, bioleaching, bio-oxidation, bio-precipitation, bio-flotation, bio-flocculation, bio-sorption, bio-reduction, bio-electrometallurgical technologies and bioaccumulation. The mechanism of gold biorecovery by microbes is explained in detail to explore its intracellular mechanistic, which help it withstand high concentrations of gold without causing any fatal consequences. Major challenges and future opportunities associated with each method and how they will dictate the fate of gold bio-metallurgy from metal wastes or metal infested soil bioremediation in the coming future are also discussed. With the help of concurrent advancements in high-throughput technologies, the gold bio-exploratory methods will speed up our ways to ensure maximum gold retrieval out of such low-grade ores containing sources, while keeping the gold mining clean and more sustainable.

Recovery of Copper from Leached Tailing Solutions by Biosorption

Due to the progressive fall of the ore grades and the increasingly refractory composition of minerals, concentrating plants have increased which has led to an increase in the generation of tailings. Tailings, especially those obtained in the past, have remaining copper and other valuable species in quantities that can potentially be recovered, such as gold, silver, vanadium, and rare earth elements which transforms this abundant waste into a potential source of precious or strategic metals for secondary mining. One of the techniques of solid–liquid separation that processes solutions with low concentrations of metals corresponds to adsorption, and more recently biosorption, which is based on the use of biological matrices that do not constitute an environmental liability after application. Biosorption occurs as a consequence of the wide variety of active functional groups present in different types of biomass. Bacterial, fungal, plant, and algal biomasses have been described as biosorbents, mainly for the treatment of diluted and simple solutions. This work aims to recover copper from leached tailings using biomass of the red algae Gracilaria chilensis as a biosorbent. The tailing samples were taken from an abandoned deposit, in the north of Chile, and after an acid leaching copper was biosorbed, kinetics of adsorption and the equilibrium isotherms were studied, applying the Freundlich and Langmuir models. Operational parameters such as adsorbent dose, pH, and initial metal concentration were studied.

Synthesis of green marine algal-based biochar for remediation of arsenic(V) from contaminated waters in batch and column mode of operation

The sorption behavior of biochar derived from green seaweed (Ulva reticulata) toward arsenic(V) ions was explored in both batch and continuous modes. The pH edge experiments indicated optimum arsenic(V) sorption observed at pH 4, with maximum sorptional capacity of 7.67 mg/g through isotherm experiments. The kinetic experimental trials indicated that arsenic(V) sorption onto biochar was a fast electrostatic attraction process, with maximum removal occurred within 30 min. The sorption isotherms were modeled using the Toth, Redlich-Peterson, Langmuir and Freundlich isotherm models while the adsorption kinetics was modeled using the pseudo-first- and pseudo-second-order kinetic equations. The three-parameter models (Redlich-Peterson and Toth) better described the isotherm data, whereas pseudo-first-order model represented kinetic data well with low error and high correlation coefficient values. Among the different alkaline and acidic elutants investigated, the solution of 0.01 M NaOH effectively desorbed arsenic(V) from spent biochar. The feasibility of the biochar in continuous remediation of arsenic(V) from contaminated waters was explored in an up-flow fixed column. The biochar exhibited arsenic(V) removal efficiency and sorptional uptake of 59.5% and 8.12 mg/g, respectively. The biochar-loaded column was effectively desorbed using NaOH (0.01 M), with desorption efficiency of 99.5%.

Gold (III) adsorption from dilute waste solutions onto Amberlite XAD7 resin modified with L-glutamic acid

The main purpose of this paper was to obtain a material with efficient adsorbing properties and selectivity, to recover the gold (III) from residual diluted solutions resulted from the electroplating process. In this regard, a material was obtained by physico-chemical functionalization of a chemically inert support with functional groups of nitrogen and carboxyl. As a source of functional groups glutamic acid was used, and Amberlite XAD7 type acrylic resin was used as solid support. In order to establish the mechanism of the adsorption process, kinetic, thermodynamic and equilibrium studies were performed. The maximum adsorption capacity of the material has been established, and a gold (III) recovery process has been proposed using thermal decomposition of the exhausted adsorbed material. Main objective of this study was to evaluate an environmental friendly adsorbent material to recover gold from secondary industrial sources.

Remediation of complex remazol effluent using biochar derived from green seaweed biomass

The unique property of biochar, synthesized from a green seaweed (Ulva lactuca), to remediate complex Remazol dye bearing wastewater was investigated. Preliminary trials were targeted to explore the remediation capacity of biochar towards each of Remazol dyes (Remazol brilliant blue R (RBBR), Remazol brilliant orange 3R (RBO3R), Remazol brilliant violet 5R (RBV5R), and Remazol Black B (RBB)) in single-solute system. The results show that equilibrium pH played a vital part with maximum sorption observed at pH 2.0. The isotherm experiments confirmed that biochar exhibited high uptakes of 0.301, 0.292, 0.265, and 0.224 mmol/g for RBO3R, RBBR, RBV5R, and RBB, respectively. Due to the presence of multiple dyes as well as high concentration of auxiliary chemicals, the performance of biochar to remediate Remazol effluent was inhibited markedly compared to single solute systems. Nevertheless, the dye removal efficiency was above 77.5% and the decolorization rate was high with more than 95% of total dye decolorization completed within 240 min. Our results provide novel insights into the potential of biochar to remove Remazol dyes from complex dye wastewaters.

Zinc oxide templating of porous alginate beads for the recovery of gold ions

In this study, a novel porous alginate adsorbent was prepared by zinc oxide templating to selectively adsorb Au (III) ions from multi-metallic solutions under acidic condition. Due to the porous structure of the prepared sorbent, high uptake capacity and fast adsorption kinetics of Au (ІІІ) were achieved, which renders the prepared adsorbent great potential for practical applications in fixed-bed columns for large-scale applications. The adsorption of Au (III) by the prepared adsorbent led to the reduction of Au (III) to metallic gold. Adsorption and reduction of Au (III) in the process are mediated by the ionic and covalent interaction between Au (III) ions and the protonated functional groups on the modified alginate.

Recovery of gold from electronic waste using chemical assisted microbial biosorption (hybrid) technique

The aim of present study was to develop a modified method of gold recovery from e-waste. Selective biosorption of gold from contact point of printed circuit board was achieved by using the combination of ammonium thiosulfate (AT) and Lactobacillus acidophilus (LA).Improvement in biosorption was due to the π-π interaction and resultant change in amide absorption bond between AT and LA, as evidenced by infrared spectroscopy. Selection was justified by some basic postulates of ionic radii and confirmed by inductively coupled plasma atomic emission spectroscopy. This methodology provides a unique leaching-sorption method for gold recovery and 85% of gold was recovered (from AT leachant) by the proposed combination.

Tunichrome-Inspired Gold-Enrichment Dispersion Matrix and Its Application in Water Treatment: A Proof-of-Concept Investigation

Tunicate, a filter-feeder in seawater, is able to accumulate high amount of metals using intracellular polymer matrices. The woven pyrogallol structures of tunichrome, a small peptide contained in tunicate's blood cells, is believed to be responsible for selective metal sequestration in tunicates from seawater. However, the intriguing tunichrome matrix is difficult both to harvest from the tunicate and to synthesize massively due to the extreme oxidation sensitivity of the pyrogallol moiety which limits the study scope. Here, we succeeded to mimic tunichrome by conjugating two cheap and naturally occurring components: pyrogallol-5-carboxylic acid (gallic acid) and chitin nanofiber. A tunicate-mimetic infiltration matrix of surface-tailored chitin nanofibers with pyrogallol moieties (CGa) demonstrated the versatility of this strategy in generation of ingenious filtration material, especially for unprecedented fine and clean gold recovery inside of the tunicate-mimetic infiltration matrix (>99%, 533 mg gold per gram weight), which exceeds that of the presently most popular materials. Complexation between pyrogallol on the nanofiber and gold was similar to that of a tunichrome's metal sequestration. Extended X-ray absorption fine structure (EXAFS) spectroscopy and data-fitting elucidated the decreased coordination numbers for Au-Au nearest neighbors, demonstrating that gold coordinated to pyrogallol units, followed by an intramolecular association of Au⁰. A catalytic reduction of 4-nitrophenol mediated by the tunicate-mimetic matrix with harvested gold revealed excellent recyclability up to 30 cycles (∼95% reduction), which together with methylene blue reduction and antimicrobial performances indicates the versatile characteristics of sustainable processes by the tunichrome mimetics. This strategy opens the door for fast-developing new biomimetic alternatives for precious metal recovery, which is not restricted to gold and can offer a tool for multifaceted soft/hard nanomaterials.

Sorption-reduction coupled gold recovery process boosted by Pycnoporus sanguineus biomass: Uptake pattern and performance enhancement via biomass surface modification

Biorecovery is emerging as a promising process to retrieve gold from secondary resources. The present study aimed to explore the uptake pattern of Pycnoporus sanguineus biomass for gold, identify the effective functional groups in gold recovery process, and thus further intensify the process via microbial surface modification. Results showed that P. sanguineus biomass could effectively recover gold with the formation of highly crystal AuNPs without any exogeneous electron donor. Under the conditions of various initial gold concentrations (1.0, 2.0, and 3.0 mM), biomass dosage of 2.0 g/L, solution pH value of 4.0, and incubation temperature of 30°C, the uptake equilibrium established after 4, 8, and 12 h, respectively. The uptake process could be well described by pseudo-second order kinetics model (R²  = 0.9988) and Langmuir isotherm model (R²  = 0.9958). The maximum uptake capacity of P. sanguineus reached as high as 358.69 mg/g. Further analysis indicated that amino, carboxyl and hydroxyl groups positively contributed to the uptake process. Among them, amino group significantly favored the uptake of gold during recovery process. When P. sanguineus biomass was modified by introduction of amino group, the gold uptake process was successfully intensified by shortening the uptake period and enhancing the uptake capacity. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1314-1322, 2017.

Biorecovery of gold as nanoparticles and its catalytic activities for p-nitrophenol degradation

Recovery of gold from aqueous solution using simple and economical methodologies is highly desirable. In this work, recovery of gold as gold nanoparticles (AuNPs) by Shewanella haliotis with sodium lactate as electron donor was explored. The results showed that the process was affected by the concentration of biomass, sodium lactate, and initial gold ions as well as pH value. Specifically, the presence of sodium lactate determines the formation of nanoparticles, biomass, and AuCl4 (-) concentration mainly affected the size and dispersity of the products, reaction pH greatly affected the recovery efficiency, and morphology of the products in the recovery process. Under appropriate conditions (5.25 g/L biomass, 40 mM sodium lactate, 0.5 mM AuCl4 (-), and pH of 5), the recovery efficiency was almost 99 %, and the recovered AuNPs were mainly spherical with size range of 10-30 nm (~85 %). Meanwhile, Fourier transforms infrared spectroscopy and X-ray photoelectron spectroscopy demonstrated that carboxyl and amine groups might play an important role in the process. In addition, the catalytic activity of the AuNPs recovered under various conditions was testified by analyzing the reduction rate of p-nitrophenol by borohydride. The biorecovered AuNPs exhibited interesting size and shape-dependent catalytic activity, of which the spherical particle with smaller size showed the highest catalytic reduction activity with rate constant of 0.665 min(-1).

Highlighting inconsistencies regarding metal biosorption

Thousands of articles have been devoted to examine different types of biosorbents and their use in cleaning polluted waters. An important objective of some studies has been the identification of the biosorption mechanisms. This type of investigation is not always performed, as it can only be done if scientists are aware of all mechanisms that, at least theoretically, control the removal of the target substances. Mistakes are often made, even in highly cited review articles, where biosorption mechanisms are named and/or grouped. The aim of this article is to highlight errors and inaccuracies as well as to discuss different classification systems of the biosorption mechanisms. This article serves as a guide, as well as a platform for discussion among researchers involved in the investigation of biosorbents, in an effort to avoid reproducing errors in subsequent articles.

Functionalized and reusable polyethylene fibres for Au(iii) extraction from aqueous solution with high adsorption capacity and selectivity

Functional UHMWPE fibres, used for efficient and selective Au(iii) adsorption from aqueous solutions, were successfully synthesized by a radiation grafting method.

Biosynthesis of silver nanoparticles using Euglena gracilis, Euglena intermedia and their extract

Extracellular and intracellular biosynthesis of silver nanoparticles (AgNPs) by Euglena gracilis (EG) strain and Euglena intermedia (EI) strain are reported in this study. The obtained nanoparticles showed an absorption peak approximates 420 nm in the UV-visible spectrum, corresponding to the plasmon resonance of AgNPs. According to the result of inductively coupled plasma-atomic emission spectrometer, the intakes of silver ions by EI and EG are roughly equal. The transmission electron microscope (TEM) analysis of the successful in vivo and in vitro synthesised AgNPs indicated the sizes, ranging from 6 to 24 nm and 15 to 60 nm in diameter, respectively, and a spherical-shaped polydispersal of the particles. The successful formation of AgNPs has been confirmed by energy dispersive X-ray analysis connected to the TEM. The Fourier transform infrared spectroscopy measurements reveal the presence of bioactive functional groups such as amines are found to be the capping and stabilising agents of nanoparticles. To our knowledge, this is the first report where two kinds of Euglena microalga were used as the potential source for in vivo and in vitro biosynthesis of AgNPs.

Biosynthesis of gold nanoparticles and related cytotoxicity evaluation using A549 cells

Biosynthesis of gold nanoparticles (AuNPs) has become an attractive area of research as it is environmentally benign. The toxicity of AuNPs synthesized by chemical routes has been widely studied. However, little is known about the toxicity associated with the biological synthesis of AuNPs. The present study was carried out to synthesize AuNPs using star anise (Illicium verum; a commercially available spice in abundance)and evaluate its toxicity using human epithelial lung cells (A549) in comparison with AuNPs synthesized by the traditional chemical methods (using sodium citrate and sodium borohydride). Apart from cell viability, markers of oxidative stress (reduced glutathione) and cell death (caspases) were also evaluated to understand the mechanisms of toxicity. Cell viability was observed to be 65.7 percent and 72.3 percent in cells exposed to chemically synthesized AuNPs at the highest dose (200nM) as compared to 80.2 percent for biologically synthesized AuNPs. Protective coating/capping of AuNPs by various polyphenolic compounds present in star anise extract appears to be a major contributor to lower toxicity observed in biologically synthesized AuNPs.

Applications of biosynthesized metallic nanoparticles - a review

We present a comprehensive review of the applications of biosynthesized metallic nanoparticles (NPs). The biosynthesis of metallic NPs is the subject of a number of recent reviews, which focus on the various "bottom-up" biofabrication methods and characterization of the final products. Numerous applications exploit the advantages of biosynthesis over chemical or physical NP syntheses, including lower capital and operating expenses, reduced environmental impacts, and superior biocompatibility and stability of the NP products. The key applications reviewed here include biomedical applications, especially antimicrobial applications, but also imaging applications, catalytic applications such as reduction of environmental contaminants, and electrochemical applications including sensing. The discussion of each application is augmented with a critical review of the potential for continued development.

Biosynthesis and Characterization of Gold and Silver Nanoparticles Using Milk Thistle ( Silybum marianum ) Seed Extract

Biogenic synthesis of gold and silver nanoparticles from aqueous solutions using milk thistle (Silybum marianum) seed extract as reducing and stabilizing agent has been reported. Formation and stabilization of nanoparticles were monitored using surface plasmon resonance (SPR) bands of UV-Vis spectroscopy. Morphology of gold and silver nanoparticles was investigated using X-ray diffraction, high-resolution transmission electron microscopy with selected area electron diffraction analysis, and dynamic light scattering. Fourier transform-infrared spectroscopy was employed to identify the possible biomolecules responsible for the reduction and stabilization of nanoparticles.

Gold nanoparticles synthesized by Geobacillus sp. strain ID17 a thermophilic bacterium isolated from Deception Island, Antarctica

Background

The use of microorganisms in the synthesis of nanoparticles emerges as an eco-friendly and exciting approach, for production of nanoparticles due to its low energy requirement, environmental compatibility, reduced costs of manufacture, scalability, and nanoparticle stabilization compared with the chemical synthesis.

Results

The production of gold nanoparticles by the thermophilic bacterium Geobacillus sp. strain ID17 is reported in this study. Cells exposed to Au³⁺ turned from colourless into an intense purple colour. This change of colour indicates the accumulation of intracellular gold nanoparticles. Elemental analysis of particles composition was verified using TEM and EDX analysis. The intracellular localization and particles size were verified by TEM showing two different types of particles of predominant quasi-hexagonal shape with size ranging from 5–50 nm. The mayority of them were between 10‒20 nm in size. FT-IR was utilized to characterize the chemical surface of gold nanoparticles. This assay supports the idea of a protein type of compound on the surface of biosynthesized gold nanoparticles. Reductase activity involved in the synthesis of gold nanoparticles has been previously reported to be present in others microorganisms. This reduction using NADH as substrate was tested in ID17. Crude extracts of the microorganism could catalyze the NADH-dependent Au³⁺ reduction.

Conclusions

Our results strongly suggest that the biosynthesis of gold nanoparticles by ID17 is mediated by enzymes and NADH as a cofactor for this biological transformation.